[tor-commits] [translation/liveusb-creator] Update translations for liveusb-creator
translation at torproject.org
translation at torproject.org
Fri Jun 9 18:47:10 UTC 2017
commit f7ff1e8934bda6e7b3109f4fe873d57be4d7666c
Author: Translation commit bot <translation at torproject.org>
Date: Fri Jun 9 18:47:07 2017 +0000
Update translations for liveusb-creator
---
ach/ach.po | 622 +++++++++++++++----------------
ady/ady.po | 622 +++++++++++++++----------------
af/af.po | 624 +++++++++++++++----------------
ak/ak.po | 622 +++++++++++++++----------------
am/am.po | 622 +++++++++++++++----------------
ar/ar.po | 836 ++++++++++++++++++++---------------------
arn/arn.po | 622 +++++++++++++++----------------
ast/ast.po | 662 ++++++++++++++++----------------
az/az.po | 830 ++++++++++++++++++++---------------------
ba/ba.po | 622 +++++++++++++++----------------
be/be.po | 622 +++++++++++++++----------------
bg/bg.po | 837 ++++++++++++++++++++---------------------
bn/bn.po | 634 +++++++++++++++----------------
bn_BD/bn_BD.po | 624 +++++++++++++++----------------
bn_IN/bn_IN.po | 648 +++++++++++++++-----------------
bo/bo.po | 622 +++++++++++++++----------------
br/br.po | 622 +++++++++++++++----------------
brx/brx.po | 622 +++++++++++++++----------------
bs/bs.po | 662 ++++++++++++++++----------------
ca/ca.po | 838 ++++++++++++++++++++---------------------
ceb/ceb.po | 622 +++++++++++++++----------------
cs/cs.po | 827 ++++++++++++++++++++--------------------
csb/csb.po | 622 +++++++++++++++----------------
cv/cv.po | 622 +++++++++++++++----------------
cy/cy.po | 672 ++++++++++++++++-----------------
da/da.po | 836 ++++++++++++++++++++---------------------
de/de.po | 849 ++++++++++++++++++++----------------------
dz/dz.po | 622 +++++++++++++++----------------
el/el.po | 840 ++++++++++++++++++++---------------------
en_GB/en_GB.po | 838 ++++++++++++++++++++---------------------
eo/eo.po | 650 +++++++++++++++-----------------
es/es.po | 844 ++++++++++++++++++++---------------------
es_AR/es_AR.po | 836 ++++++++++++++++++++---------------------
es_CL/es_CL.po | 622 +++++++++++++++----------------
es_CO/es_CO.po | 654 +++++++++++++++-----------------
es_MX/es_MX.po | 690 ++++++++++++++++------------------
et/et.po | 624 +++++++++++++++----------------
eu/eu.po | 814 +++++++++++++++++++---------------------
fa/fa.po | 836 ++++++++++++++++++++---------------------
fi/fi.po | 836 ++++++++++++++++++++---------------------
fil/fil.po | 714 +++++++++++++++++------------------
fo/fo.po | 640 +++++++++++++++----------------
fr/fr.po | 834 ++++++++++++++++++++---------------------
fr_CA/fr_CA.po | 843 ++++++++++++++++++++---------------------
fur/fur.po | 622 +++++++++++++++----------------
fy/fy.po | 636 +++++++++++++++----------------
ga/ga.po | 622 +++++++++++++++----------------
gd/gd.po | 624 +++++++++++++++----------------
gl/gl.po | 838 ++++++++++++++++++++---------------------
gu/gu.po | 622 +++++++++++++++----------------
gu_IN/gu_IN.po | 622 +++++++++++++++----------------
gun/gun.po | 622 +++++++++++++++----------------
ha/ha.po | 622 +++++++++++++++----------------
he/he.po | 824 +++++++++++++++++++---------------------
hi/hi.po | 624 +++++++++++++++----------------
hr/hr.po | 638 +++++++++++++++----------------
hr_HR/hr_HR.po | 836 ++++++++++++++++++++---------------------
ht/ht.po | 622 +++++++++++++++----------------
hu/hu.po | 836 ++++++++++++++++++++---------------------
hy/hy.po | 622 +++++++++++++++----------------
ia/ia.po | 624 +++++++++++++++----------------
id/id.po | 842 ++++++++++++++++++++---------------------
is/is.po | 836 ++++++++++++++++++++---------------------
it/it.po | 838 ++++++++++++++++++++---------------------
ja/ja.po | 836 ++++++++++++++++++++---------------------
jv/jv.po | 622 +++++++++++++++----------------
ka/ka.po | 624 +++++++++++++++----------------
kk/kk.po | 622 +++++++++++++++----------------
km/km.po | 818 +++++++++++++++++++---------------------
kn/kn.po | 624 +++++++++++++++----------------
ko/ko.po | 836 ++++++++++++++++++++---------------------
ko_KR/ko_KR.po | 652 +++++++++++++++-----------------
ku/ku.po | 622 +++++++++++++++----------------
ku_IQ/ku_IQ.po | 638 +++++++++++++++----------------
kw/kw.po | 622 +++++++++++++++----------------
ky/ky.po | 622 +++++++++++++++----------------
la/la.po | 786 +++++++++++++++++++-------------------
lb/lb.po | 836 ++++++++++++++++++++---------------------
lg/lg.po | 622 +++++++++++++++----------------
ln/ln.po | 622 +++++++++++++++----------------
lo/lo.po | 704 +++++++++++++++++-----------------
lt/lt.po | 798 +++++++++++++++++++--------------------
lv/lv.po | 840 ++++++++++++++++++++---------------------
mg/mg.po | 622 +++++++++++++++----------------
mi/mi.po | 622 +++++++++++++++----------------
mk/mk.po | 624 +++++++++++++++----------------
ml/ml.po | 622 +++++++++++++++----------------
mn/mn.po | 622 +++++++++++++++----------------
mr/mr.po | 624 +++++++++++++++----------------
ms_MY/ms_MY.po | 762 ++++++++++++++++++-------------------
mt/mt.po | 622 +++++++++++++++----------------
my/my.po | 624 +++++++++++++++----------------
nah/nah.po | 622 +++++++++++++++----------------
nap/nap.po | 622 +++++++++++++++----------------
nb/nb.po | 836 ++++++++++++++++++++---------------------
nds/nds.po | 682 ++++++++++++++++-----------------
ne/ne.po | 622 +++++++++++++++----------------
nl/nl.po | 836 ++++++++++++++++++++---------------------
nl_BE/nl_BE.po | 764 ++++++++++++++++++-------------------
nn/nn.po | 836 ++++++++++++++++++++---------------------
nso/nso.po | 622 +++++++++++++++----------------
oc/oc.po | 622 +++++++++++++++----------------
om/om.po | 624 +++++++++++++++----------------
or/or.po | 622 +++++++++++++++----------------
pa/pa.po | 688 ++++++++++++++++------------------
pap/pap.po | 622 +++++++++++++++----------------
pl/pl.po | 838 ++++++++++++++++++++---------------------
pms/pms.po | 622 +++++++++++++++----------------
ps/ps.po | 622 +++++++++++++++----------------
pt/pt.po | 836 ++++++++++++++++++++---------------------
pt_BR/pt_BR.po | 836 ++++++++++++++++++++---------------------
ro/ro.po | 836 ++++++++++++++++++++---------------------
ru/ru.po | 841 ++++++++++++++++++++---------------------
ru at petr1708/ru at petr1708.po | 622 +++++++++++++++----------------
scn/scn.po | 622 +++++++++++++++----------------
sco/sco.po | 622 +++++++++++++++----------------
si_LK/si_LK.po | 784 ++++++++++++++++++--------------------
sk/sk.po | 820 +++++++++++++++++++---------------------
sk_SK/sk_SK.po | 840 ++++++++++++++++++++---------------------
sl/sl.po | 650 +++++++++++++++-----------------
sl_SI/sl_SI.po | 822 +++++++++++++++++++---------------------
sn/sn.po | 622 +++++++++++++++----------------
so/so.po | 622 +++++++++++++++----------------
son/son.po | 622 +++++++++++++++----------------
sq/sq.po | 836 ++++++++++++++++++++---------------------
sr/sr.po | 734 +++++++++++++++++-------------------
sr at latin/sr at latin.po | 686 ++++++++++++++++------------------
st/st.po | 622 +++++++++++++++----------------
su/su.po | 622 +++++++++++++++----------------
sv/sv.po | 840 ++++++++++++++++++++---------------------
sw/sw.po | 622 +++++++++++++++----------------
szl/szl.po | 622 +++++++++++++++----------------
ta/ta.po | 684 ++++++++++++++++------------------
te/te.po | 640 +++++++++++++++----------------
te_IN/te_IN.po | 622 +++++++++++++++----------------
templates/liveusb-creator.pot | 834 ++++++++++++++++++++---------------------
tg/tg.po | 622 +++++++++++++++----------------
th/th.po | 822 +++++++++++++++++++---------------------
ti/ti.po | 622 +++++++++++++++----------------
tk/tk.po | 622 +++++++++++++++----------------
tr/tr.po | 838 ++++++++++++++++++++---------------------
tzm/tzm.po | 624 +++++++++++++++----------------
ug at Arab/ug at Arab.po | 648 +++++++++++++++-----------------
uk/uk.po | 836 ++++++++++++++++++++---------------------
ur/ur.po | 624 +++++++++++++++----------------
ur_PK/ur_PK.po | 626 +++++++++++++++----------------
uz/uz.po | 622 +++++++++++++++----------------
ve/ve.po | 622 +++++++++++++++----------------
vi/vi.po | 836 ++++++++++++++++++++---------------------
wa/wa.po | 622 +++++++++++++++----------------
wo/wo.po | 622 +++++++++++++++----------------
zh_CN/zh_CN.po | 839 ++++++++++++++++++++---------------------
zh_HK/zh_HK.po | 840 ++++++++++++++++++++---------------------
zh_TW/zh_TW.po | 838 ++++++++++++++++++++---------------------
zu/zu.po | 622 +++++++++++++++----------------
155 files changed, 51240 insertions(+), 57434 deletions(-)
diff --git a/ach/ach.po b/ach/ach.po
index f43f5e6..5a25e4c 100644
--- a/ach/ach.po
+++ b/ach/ach.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Acoli (http://www.transifex.com/otf/torproject/language/ach/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ach\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ady/ady.po b/ady/ady.po
index 9b37435..7606a1f 100644
--- a/ady/ady.po
+++ b/ady/ady.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Adyghe (http://www.transifex.com/otf/torproject/language/ady/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ady\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/af/af.po b/af/af.po
index 3f08f5b..be2f426 100644
--- a/af/af.po
+++ b/af/af.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Afrikaans (http://www.transifex.com/otf/torproject/language/af/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: af\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "of"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ak/ak.po b/ak/ak.po
index df3170d..a486702 100644
--- a/ak/ak.po
+++ b/ak/ak.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Akan (http://www.transifex.com/otf/torproject/language/ak/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ak\n"
"Plural-Forms: nplurals=2; plural=n > 1;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/am/am.po b/am/am.po
index eb4bdd2..5ebca0a 100644
--- a/am/am.po
+++ b/am/am.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Amharic (http://www.transifex.com/otf/torproject/language/am/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: am\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ar/ar.po b/ar/ar.po
index e8a19fd..7f5553d 100644
--- a/ar/ar.po
+++ b/ar/ar.po
@@ -21,9 +21,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-09-24 16:39+0000\n"
-"Last-Translator: Singapore Goldindor\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Arabic (http://www.transifex.com/otf/torproject/language/ar/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +31,551 @@ msgstr ""
"Language: ar\n"
"Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "استنسخ و ثبت"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "من الضروري ان يعمل هذا التطبيق بصلاحيات حساب رووت"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "ثبت من ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "جاري فك ضغط ملف الأيزو بداخل الجهاز المختار..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "تمت الكتابة علي الجهاز بسرعة %(speed)d ميغابايت بالثانية"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "تم تحديد %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "تجهيز ملف الإقلاع \"OLPC\"..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "كان هناك مشكلة في تنفيذ الأمر التالي: `%(command)s`.\nتم كتابة الخطأ بالتفصيل في سجل '%(filename)s'. "
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "التحقق من الـSHA1 لملف القرص الحي..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s جاهز للأقلاع "
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "التحقق من الـSHA256 لملف القرص الحي..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n\np, li { white-space: pre-wrap; }\n\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">تحتاج المساعدة؟ اقرأ <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">الوثائق</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>ثبِّت Tails في ذاكرة USB أخرى عبر نسخ نظام Tails الذي تستخدمه حاليا..</li>\n<li>إن ذاكرة USB التي تثبت فيها النظام جرت تهيئها وعليه فإن كل البيانات التي بداخلها فُقدت.</li>\n<li>إن التخزين الثابت المُعمَّى لذاكرة USB لنظام Tails المستخدم حاليا لم يُستنسَخ.</li>\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>ترقية وحدة الذاكرة الفلاشة لتيلز أخرى لنفس الإصدار من تيلز الذي تستخدمه حاليا.</li>\n\n<li>يبقى الحفاظ على التخزين المستمر المشفر لوحدة الذاكرة الفلاشة لتيلز التي ترقي.</li>\n\n<li>لا يتم نسخ التخزين الثابت المشفر من وحدة الذاكرة الفلاشة التي تستخدمها حاليا.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>ترقية وحدة الذاكرة الفلاشة لتيلز أخرى لإصدار من صورة ISO.</li>\n\n<li>يبقى الحفاظ على التخزين المستمر المشفر لوحدة الذاكرة الفلاشة لتيلز التي ترقي.</li>\n\n<li>لا يتم نسخ التخزين الثابت المشفر من وحدة الذاكرة الفلاشة التي تستخدمها حاليا.</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "تصفح"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "إذا خصصت مساحة إضافية في قرص الـUSB لتصبح مساحة دائمة، سوف تستطيع أن تخزن البيانات و القيام بتعديلات دائمة علي نظام التشغيل الحي. من دون المساحة الإضافية الدائمة لن تستطيع حفظ البياناتت و ستفقدها إذا تم إعادة تشغيل النظام."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "يتم حساب SHA1 الخاص بـ %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "خطأ: إن الـSHA1 للقرص الحي غير صحيح. تستطيع تشغيل هذا البرنامج باستخدام المعطى --noverify لتجاوز الفحص."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "لا يمكن العثور"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ملف أيزو غير معروف، سيتم تجاوز الفحص."
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "لا يمكن العثور على الجهاز %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "لا توجد مساحة كافية على الجهاز.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "يتم إنشاء مكان تخزين دائم بحجم %s ميجابايت"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "لم يتم تركيب الجهاز بعد، لذلك لا يمكن تحديد سعة التخزين المتبقية."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "تحميل %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "تم التحميل!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "غير قادر علي نسخ %(infile)s لـ %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "التحميل فشل: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "يتم حاليا إزالة نظام التشغيل الحي الموجود أصلاً"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "جاري التحميل %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "نوع القرص loopback ، سيتم تجاوز إعادة ضبط سجل الإقلاع الرئيسي"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "غير قادر علي تغيير صلاحيات %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "يتم الدخول على unmount_device للجهاز '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "خطأ بفحص الجهاز"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "خطأ: لا يمكن ضبط العنوان أو الحصول على رقم الـUUID لجهازك. ﻻ يمكن المتابعة."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "خطأ: إن الـSHA1 للقرص الحي غير صحيح. تستطيع تشغيل هذا البرنامج باستخدام المعطى --noverify لتجاوز الفحص."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "جاري فك ضغط ملف الأيزو بداخل الجهاز المختار..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "غير قادر علي إزالة ملف من نظام التشغيل الحي السابق: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "يتم إعادة تشكيل جهاز %(device)s كنظام FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "نجح التحقق من الـMD5 لملف الأيزو"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "غير قادر علي إزالة مجلد من نظام التشغيل الحي السابق: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "التحقق من الـMD5 لملف الأيزو فشل"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "لا يمكن العثور على الجهاز %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "إذا لم تقم بتحديد ملف أيزو يحتوي علي نظام تشغيل حي, سوف يتم تحميل الأصدار المختار لك."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "غير قادر على الكتابة على الجهاز %(device)s، سيتم التجاوز."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "ثبت\nبالاستنساخ"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "بعض اقسام الجهاز المختار %(device)s مركبة. سيتم فكهم قبل بدء عملية التثبيت."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "ثبت تيلز"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "نظام ملفات غير معرف. قد يحتاج جهازك إلى إعادة تشكيل."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "تم التثبيت!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "نظام ملفات غير مدعوم: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "تم التثبيت! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "تم التثبيت. اضغط \"موافق\" لإغلاق هذا البرنامج."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "غير قادر على تركيب جهاز: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "تنصيب نظام الاقلاع ..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "لا توجد نقاط تركيب"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "إنه مستحيل تطوير الجهاز %(pretty_name)s لأنه لم ينتج خلال Tails Installer. عليك استخدام %(action)s لتطوير هذا الجهاز."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "فشل إنشاء قرص USB حي!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "يتم الدخول على unmount_device للجهاز '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "تأكد من فك ضغط ملف \"liveusb-creator\" قبل العمل بالبرنامج."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "إزالة تثبيت نظام الملفات من '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "تأكد أن قرص الـ USB متصل بالجهاز وتم تشكيلة بنظام الملفات FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "إزالة تثبيت '%(udi)s' على '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "تركيب %s موجود بعد إزالة الجهاز"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "لا توجد مساحة فارغة على الجهاز %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "تقسيم الجهاز %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "لا توجد نقاط تركيب"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "جاري تحديث خصائص تجزئة القرص الخاصة بالنظام %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "لا توجد مساحة كافية على الجهاز.\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "هذا الجهاز غير مدعوم '%(device)s', الرجاء الابلاغ عن العطل."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "صيغة هذا القسم هي FAT16؛ سيتم تحديد المساحة إلى 2 جيجابايت"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "على أية حال سوف أحاول المتابعة."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "صيغة تقسيمة التخزين هي FAT32، و هذا سيحد حجم الملفات إلى ٤ جيجابايت."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "جاري التحقق من نظام الملفات"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "تقسيم الجهاز %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "غير قادر على تغيير عنوان القرص: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "حيز التخزين الدائم"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "تنصيب نظام الاقلاع ..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "الذاكرة الأستمرارية (0 ميجا)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "الرجاء التأكد من اختيار جهازك"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "إزالة ملفات %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "تحديث النشرات..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s جاهز للأقلاع "
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "تم تحديث النشرات!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "غير قادر على ايجاد تقسيمة القرص"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "إزالة ملفات %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "يتم إعادة تشكيل جهاز %(device)s كنظام FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "يتم حاليا إزالة نظام التشغيل الحي الموجود أصلاً"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "إعادة ضبط سجل الإقلاع الرئيسي الخاص بـ %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "حدد ملف أيزو حي"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "تجهيز ملف الإقلاع \"OLPC\"..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "نوع القرص loopback ، سيتم تجاوز إعادة ضبط سجل الإقلاع الرئيسي"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "بعض اقسام الجهاز المختار %(device)s مركبة. سيتم فكهم قبل بدء عملية التثبيت."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "نوع المصدر لا يدعم التحقق من الـMD5 لملف الأيزو، سيتم التجاوز"
+msgid "Calculating the SHA1 of %s"
+msgstr "يتم حساب SHA1 الخاص بـ %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "مزامنة البيانات الموجودة على القرص ..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "الجهاز المقصود"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "خطأ بفحص الجهاز"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "الجهاز \"%(pretty_name)s\" ليس لديه السعة الكافية لتثبيت Tails (مطلوب%(size)s جيجابايت على الأقل)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "غير قادر على العثور على أي جهاز مدعوم"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "الملف المختار غير قابل للقراءة. الرجاء تغيير صلاحياته أو اختيار ملف آخر."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "تأكد أن قرص الـ USB متصل بالجهاز وتم تشكيلة بنظام الملفات FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "كان هناك مشكلة في تنفيذ الأمر التالي: `%(command)s`.\nتم كتابة الخطأ بالتفصيل في سجل '%(filename)s'. "
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "نظام ملفات غير مدعوم: %s\nالرجاء نسخ قرص USB نسخة احتياطية ثم تشكيلة بنظام الملفات FAT"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "هذا الزر يتيح لك ان تتصفح عن نظام تشغيل حي بصيغة ملف أيزو قمت بتنزيله من قبل. إذا لم تقوم بختيار واحد, سوف يتم تحميل اصدار لك تلقائيا."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "غير قادر علي الحصول علي Win32_LogicalDisk; win32com الطلب لم ينتج عنه أي نتائج"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "هذا الزر سوف يبدء عملية إنشاء نظام تشغيل حي علي قرص USB. و يتبع ذلك تنزيل اصدار اختياري (إذا لم يتم اختيار اصدار مسبقاً), فك ضغط ملف الأيزو علي جهاز الـUSB, إنشاء المساحة الدائمة, و تثبيت محمل الإقلاع."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "لا يمكن العثور"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "هذا هو قرص الـUSB الذي سيتم تثبيت النظام الحي عليه. من ضروري ان يتم مسح البيانات و تغيير صيغة نظام الملف إلي FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "إصدار غير معروف: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "جاري التحميل %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "هذا هو شريط التقدم و سوف يشير إلي مدي تقدمك في عملية إنشاء النظام الحي علي جهاز الـUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "خطأ: لا يمكن ضبط العنوان أو الحصول على رقم الـUUID لجهازك. ﻻ يمكن المتابعة."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "هذه هي لوحة مراقبة الحالة و هنا يتم طباعة كل الرسائل."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "تم التثبيت! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "على أية حال سوف أحاول المتابعة."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "تم العثور على محرك أقراص USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "تنبيه: يجب تنفيذ هذه الأداة بصلاحيات مدير النظام. لعمل هذا، انقر باليمين على الأيقونة وافتح الخصائص. في صفحة \"Compatibility/التوافقية\"، فعل الخيار \"Run this program as an administrator/قم بتشغيل هذا التطبيق كمدير\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "غير قادر على تغيير عنوان القرص: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "غير قادر علي تغيير صلاحيات %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "غير قادر علي نسخ %(infile)s لـ %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "لم يتم العثور على أي قرص USB."
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "الجهاز \"%(pretty_name)s\" ليس لديه السعة الكافية لتثبيت Tails (مطلوب%(size)s جيجابايت على الأقل)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "غير قادر على العثور على أي جهاز مدعوم"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "غير قادر على ايجاد تقسيمة القرص"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "ثبت من ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "غير قادر علي الحصول علي Win32_LogicalDisk; win32com الطلب لم ينتج عنه أي نتائج"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "إنه مستحيل تطوير الجهاز %(pretty_name)s لأنه لم ينتج خلال Tails Installer. عليك استخدام %(action)s لتطوير هذا الجهاز."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "تحديث النشرات..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "تم تحديث النشرات!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "تم التثبيت!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "لا يمكن تركيب الجهاز"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "غير قادر على تركيب جهاز: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "الرجاء التأكد من اختيار جهازك"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "غير قادر علي إزالة مجلد من نظام التشغيل الحي السابق: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "ستقوم بتثبيت تايلز على %(size)s %(vendor)s %(model)s جهاز (%(device)s). كل البيانات على الجهاز ستمسح. هل تريد الاستمرار؟"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "غير قادر علي إزالة ملف من نظام التشغيل الحي السابق: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "ستقوم بتحديث تايلز على %(parent_size)s %(vendor)s %(model)s جهاز (%(device)s). كل البيانات المحفوظة ستتم كما هي. هل تريد الاستمرار؟"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "تم التحميل!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "التحميل فشل: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "تستطيع المحاولة مرة أخرى لاستئناف التحميل"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "غير قادر على إعادة ضبط سجل الإقلاع الرئيسي. قد تكون حزمة `syslinux` غير مثبتة."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "الملف المختار غير قابل للقراءة. الرجاء تغيير صلاحياته أو اختيار ملف آخر."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "لا يمكن استخدام الملف المُحدد. قد يحالفك حظ أكثر إن نقلت ملف الأيزو إلى المجلد الرئيسي لقرصك (C:\\ على سبيل المثال)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "غير قادر على الكتابة على الجهاز %(device)s، سيتم التجاوز."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ملف أيزو غير معروف، سيتم تجاوز الفحص."
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "خطأ غير معروف ببرنامج dbus عند محاولة تركيب جهاز: %(message)s"
+msgid "%(filename)s selected"
+msgstr "تم تحديد %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "نظام ملفات غير معرف. قد يحتاج جهازك إلى إعادة تشكيل."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "إصدار غير معروف: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "إزالة تثبيت '%(udi)s' على '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "إزالة تثبيت نظام الملفات من '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "هذا الجهاز غير مدعوم '%(device)s', الرجاء الابلاغ عن العطل."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "نظام ملفات غير مدعوم: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "نظام ملفات غير مدعوم: %s\nالرجاء نسخ قرص USB نسخة احتياطية ثم تشكيلة بنظام الملفات FAT"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "جاري تحديث خصائص تجزئة القرص الخاصة بالنظام %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "طوِر\nخلال الإستنساخ"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "ثبت تيلز"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "طوِر\nمن ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "أستخدام نظام تشغيل حي بصيغة أيزو"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "يتم التحقق من الـMD5 لملف الأيزو"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "التحقق من الـSHA1 لملف القرص الحي..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "التحقق من الـSHA256 لملف القرص الحي..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "جاري التحقق من نظام الملفات"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "تحذير: إنشاء مساحة دائمة جديدة سوف يحذف الموجودة أصلاً."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "تنبيه: يجب تنفيذ هذه الأداة بصلاحيات مدير النظام. لعمل هذا، انقر باليمين على الأيقونة وافتح الخصائص. في صفحة \"Compatibility/التوافقية\"، فعل الخيار \"Run this program as an administrator/قم بتشغيل هذا التطبيق كمدير\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "تمت الكتابة علي الجهاز بسرعة %(speed)d ميغابايت بالثانية"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "ستقوم بتثبيت تايلز على %(size)s %(vendor)s %(model)s جهاز (%(device)s). كل البيانات على الجهاز ستمسح. هل تريد الاستمرار؟"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "ستقوم بتحديث تايلز على %(parent_size)s %(vendor)s %(model)s جهاز (%(device)s). كل البيانات المحفوظة ستتم كما هي. هل تريد الاستمرار؟"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "أنت تستخدم نسخة قديمة من syslinux-extlinux، وهي لا تدعم نظام الملفات ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "تستطيع المحاولة مرة أخرى لاستئناف التحميل"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "من الضروري ان يعمل هذا التطبيق بصلاحيات حساب رووت"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "أو"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/arn/arn.po b/arn/arn.po
index 7d518e2..13940d4 100644
--- a/arn/arn.po
+++ b/arn/arn.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Mapudungun (http://www.transifex.com/otf/torproject/language/arn/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: arn\n"
"Plural-Forms: nplurals=2; plural=n > 1;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ast/ast.po b/ast/ast.po
index 15666c6..7052ee6 100644
--- a/ast/ast.po
+++ b/ast/ast.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Asturian (http://www.transifex.com/otf/torproject/language/ast/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ast\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fallu: El SHA1 del so CD Live ye inválidu. Tien d'executase esti programa col argumentu --noverify pa omitir esti chequéu de verificación."
+
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Nun pudo alcontrase'l preséu %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "¡Descarga completa!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Falló la descarga:"
-
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "Descargando %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr ""
+msgid "Unsupported filesystem: %s"
+msgstr "Sistema de ficheros non sofitáu: %s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fallu: Nun pudo etiquetase u obtener el UUID del so preséu. Nun se puede siguir."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fallu: El SHA1 del so CD Live ye inválidu. Tien d'executase esti programa col argumentu --noverify pa omitir esti chequéu de verificación."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:775
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr ""
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificando sistema de ficheros..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:980
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "La creación del USB live falló."
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Decátese de que la so unidá USB ta coneutada y formatiada col sistema de ficheros FAT"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "No free space on device %(device)s"
-msgstr ""
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Esbilla el Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Decátese de que la so unidá USB ta coneutada y formatiada col sistema de ficheros FAT"
+
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de ficheros non sofitáu: %s\nPor favor, fai copia de seguridá y da-y formatu al to discu USB col sistema de ficheros FAT."
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "Versión desconocida: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descargando %s..."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fallu: Nun pudo etiquetase u obtener el UUID del so preséu. Nun se puede siguir."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "¡Descarga completa!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Falló la descarga:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Puedes intentar otra vuelta facer la descarga"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versión desconocida: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistema de ficheros non sofitáu: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de ficheros non sofitáu: %s\nPor favor, fai copia de seguridá y da-y formatu al to discu USB col sistema de ficheros FAT."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificando sistema de ficheros..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Alvertencia: La creación d'un overlay persistente desaniciará l'actual esistente."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Puedes intentar otra vuelta facer la descarga"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/az/az.po b/az/az.po
index 258a4d7..4c40a4b 100644
--- a/az/az.po
+++ b/az/az.po
@@ -10,9 +10,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-11-09 12:41+0000\n"
-"Last-Translator: Nikafn <appone6 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Azerbaijani (http://www.transifex.com/otf/torproject/language/az/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: az\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonla və Qur\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Bu aplikasiyanı əsas olaraq istifadə etməlisən"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ISO-dan Qur\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Nişanlanmış ötürücüyə canlı şəklin çıxarılması..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Quraşdırıcı"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Ötürücüyə %(speed)d MB/sec sürəti ilə yazdı"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seçilmişdir"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC yükləmə faylının quraşdırılması..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Bu sərəncamın yerinə yetirilməsində problemlər var idi: `%(command)s`.\nProblem haqqında daha ətraflı məlumata '%(filename)s' faylında baxa bilərsən."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "CanlıCD şəklinin SHA1 məbləğinin yoxlanışı..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s artıq boot edilə biləndir"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "CanlıCD şəklinin SHA256 məbləğinin yoxlanışı..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Yardım lazımdır? Ətraflı <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">oxu</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Tails-i digər USB-yə quraşdırmaq üçün istifadə etdiyin Tails sistemini köçürün..</li>\n\n<li>Yüklədiyiniz fləş kart format olunub və bütün məlumatlar silinib.</li>\n\n<li>Hazırda istifadə etdiyiniz Tail USB kartın şifrələnmiş saxlancı kopyalanmayıb.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Xəta: Canlı CD-in SHA1-i xətalıdır. Sən bu proqramı yoxlama çekini ötürmək üçün --noyoxlama arqumenti ilə işlədə bilərsən."
+
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Tanınmayan ISO, məbləğin yoxlanışı ötürülür"
+
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ötürücüdə kifayət qədər boş yer yoxdur.\n%dMD ISO + %dMB sahə > %dMB boş yer"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Daimi %sMB yer yaradılır"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Bax"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "%(infile)s faylının %(outfile)s faylına köçürülməsi alınmadı: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "USB kartında daimi ekstra yer saxlamaqla canlı əməliyyat sistemlərini saxlamaq və daimi dəyişikliklər etmək şansınız olacaq. Bu olmasa, saxlamaq istədiyiniz məlumatlar yenidən quraşdırma əməliyyatı zamanı itəcəkdir."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Mövcud Canlı OS-in xaric edilməsi"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s üçün SHA1 hesablanır"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "%(file)s chmod uğursuzdur: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Tapılmadı"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Əvvəlki CanlıOS-dan faylın çıxarılması alınmır: %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Əvvəlki CanlıOS-dən kataloqin çıxarılması alınmır: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "%s cihazı tapılmadı"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Daimi %sMB yer yaradılır"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "%(device)s üzərinə yazılma alınmadı, ötürülür."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Ötürücü hələ ki quraşdırılmadığı üçün onun tərkibindəki boş yeri müəyyənləşdirə bilmirik."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "%(device)s nişanlanmış ötürücünün bəzi bölmələri quraşdırılmışdır. Qurşadırılma prosesi başlanmazdan əvvəl onlar geri quraşdırılacaqlar."
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s endir"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Bilinməyən fayl sistemi. Cihazının yenidən formatlanmağa ehtiyacı ola bilər."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Endirmə tamamlandı!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Dəstəklənməyən fayl sistemi: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Endirmə mümkün olmadı:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "%s endirilir..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Ötürücünün quraşdırılması alınmır: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Ötürücüdə qısaqapanma var, MBR yenilənməsini ötürür"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Quraşdırılan nöqtələr tapılmadı"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "'%(device)s' üçün ötürücünün_yenidən quraşdırılması"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Ötürücünün tədqiqat xətası"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Xəta: Ötürücün üçün etiket təyin və ya UUID əldə edə bilmir. Davam etmək mümkün deyil."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Xəta: Canlı CD-in SHA1-i xətalıdır. Sən bu proqramı yoxlama çekini ötürmək üçün --noyoxlama arqumenti ilə işlədə bilərsən."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Nişanlanmış ötürücüyə canlı şəklin çıxarılması..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "'%(device)s' üzərində quraşdırılmış fayl sisteminin geri quraşdırılması"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s-ın FAT32 kimi formatlanması"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "'%(udi)s'-nin '%(device)s' üzərində geri quraşdırılması"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 yoxlaması uğurla başa çatdı"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "%s-in quraşdırılması quraşdırılmanın olmamasından sonra mövcud olur"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 yoxlama tədqiqi xətalıdır"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "%(device)s bölmə ötürücüsü"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Mövcud Canlı ISO-nu seçməsəniz, seçilmiş buraxılış sizin üçün endiriləcək."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "%(system_partition)s sistem bölməsinin seçimlərinin yenilənməsi"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr "Quraşdır\nklonlamaqla"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dəstəklənməyən '%(device)s' ötürücüsü, problemi mütləq bölüş."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tail-ları Quraşdır"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Heç nəyə baxmayaraq davam etməyə cəhd edilir."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Quraşdırma tamamlandı!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Fayl sisteminin yoxlanışı..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Quraşdırma tamamlandı! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Qoraşdırma tamamlanmışdır. Proqramı bağlamaq üçün OK düyməsini kliklə."
+msgid "Unable to change volume label: %(message)s"
+msgstr "Səs səviyyəsinin dəyişilməsi uğursuzdur: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Yükləyicinin quraşdırılması..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "CanlıUSB yaradılması xətalıdır!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Bu proqramı işlətməzdən əvvəl bütöv liveusb-creator zip faylını çıxardığına əmin ol."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB açarının FAT fayl sistemi ilə daxil edildiyindən və formatlandığından əmin ol"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "%s-in quraşdırılması quraşdırılmanın olmamasından sonra mövcud olur"
+msgid "Removing %(file)s"
+msgstr "%(file)s xaric edilməsi"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "%(device)s ötürücüsündə boş yer yoxdur"
+msgid "%s already bootable"
+msgstr "%s artıq boot edilə biləndir"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Quraşdırılan nöqtələr tapılmadı"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Hər hansı bölmə tapılmır"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ötürücüdə kifayət qədər boş yer yoxdur.\n%dMD ISO + %dMB sahə > %dMB boş yer"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "FAT16 bölməsi; Sahə ölçüsü limiti 2G"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s-ın FAT32 kimi formatlanması"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "FAT32 bölməsi; Sahə ölçüsü limiti 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "%(device)s bölmə ötürücüsü"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Davamlı Arxiv"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Davamlı Arxiv (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Lütfən, ötürücü seçimini təsdiqlə"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Buraxılışların yenilənməsi..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Buraxılışlar yeniləndi!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s xaric edilməsi"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Mövcud Canlı OS-in xaric edilməsi"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "%s üçün Master Yükləmə Qeydinin Sıfırlanması"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Canlı ISO seç"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC yükləmə faylının quraşdırılması..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Ötürücüdə qısaqapanma var, MBR yenilənməsini ötürür"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "%(device)s nişanlanmış ötürücünün bəzi bölmələri quraşdırılmışdır. Qurşadırılma prosesi başlanmazdan əvvəl onlar geri quraşdırılacaqlar."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Mənbə növü ISO MD5 məbləğini dəstəkləmir, ötürür"
+msgid "Calculating the SHA1 of %s"
+msgstr "%s üçün SHA1 hesablanır"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Diskdəki məlumatın sinxronlaşdırılması..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Nişanlanmış Ötürücü"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Ötürücünün tədqiqat xətası"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Hər hansı dəstək ötürücüsü tapılmır"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Seçilmiş fayl oxunmur. Lütfən, onun icazələrini düzəlt, ya da başqa fayl seç."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB açarının FAT fayl sistemi ilə daxil edildiyindən və formatlandığından əmin ol"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Bu sərəncamın yerinə yetirilməsində problemlər var idi: `%(command)s`.\nProblem haqqında daha ətraflı məlumata '%(filename)s' faylında baxa bilərsən."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Dəstəklənməyən fayl sistemi: %s\nLütfən USB açarını FAT fayl sistemi vasitəsilə arxivləşdirib formatla."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Bu düymə az əvvəl endirdiyiniz Canlı ISO sistemi yoxlamağınıza imkan verir. Heç birini seçməsəniz, buraxılış sizin üçün avtomatik endiriləcəkdir."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk əldə edilə bilmir; win32com sorğusu heç bir nəticə vermədi"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Bu düymə avtomatik olaraq CanlıUSB-i başladacaq. Bu istəyə bağlı olan buraxılışın yüklənməsinə (əgər mövcud olan seçilməmişsə), ISO-nun USB-ə keçirilməsinə, davamlı sahənin yaradılmasına və yükləyicinin quraşdırılmasına səbəb olur."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Tapılmadı"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Canlı sistemini quraşdırmaq istədiyin USB budur. Bu ötürücü FAT fayl sistemi vasitəsilə formatlanmalıdır."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Bilinməyən buraxılış: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s endirilir..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Bu inkişaf zolağı CanlıUSB yaradılış prosesinin hansı mərhələsində olduğunu izləməyə kömək olacaq"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Xəta: Ötürücün üçün etiket təyin və ya UUID əldə edə bilmir. Davam etmək mümkün deyil."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Bu bütün mesajların yönləndirildiyi status əmridir."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Quraşdırma tamamlandı! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Heç nəyə baxmayaraq davam etməyə cəhd edilir."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Təhlükə: Bu qurğu Administrator tərəfindən işlədilməlidir. Bunu etmək üçün işarənin üzrəində sağ düyməni sıx və \"Properties\" seçimini et. \"Compatibility tab\" başlığı altında \"Run this program as an administrator\"qutusunu işarələ."
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB yaddaş tapıldı"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Səs səviyyəsinin dəyişilməsi uğursuzdur: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "%(file)s chmod uğursuzdur: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "%(infile)s faylının %(outfile)s faylına köçürülməsi alınmadı: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Hər hansı USB ötürücü tapılmır"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Hər hansı dəstək ötürücüsü tapılmır"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Hər hansı bölmə tapılmır"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ISO-dan Qur\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk əldə edilə bilmir; win32com sorğusu heç bir nəticə vermədi"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Buraxılışların yenilənməsi..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Buraxılışlar yeniləndi!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Quraşdırma tamamlandı!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Ötürücünün quraşdırılması alınmır"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Ötürücünün quraşdırılması alınmır: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Lütfən, ötürücü seçimini təsdiqlə"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Əvvəlki CanlıOS-dən kataloqin çıxarılması alınmır: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Sən Tails-i %(size)s %(vendor)s %(model)s ötürücüsünə (%(device)s) quraşdırmağı planlaşdırısan. Seçilmiş ötürücüdəki bütün məlumat silinəcək. Davam edirsən?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Əvvəlki CanlıOS-dan faylın çıxarılması alınmır: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Sən Tails-i %(parent_size)s %(vendor)s %(model)s ötürücüsü (%(device)s) təkmilləşdirməyi planlaşdırırsan. Hər hansı daimi sıxlıq ötürücüdə dəyişilməz qalacaq. Davam edirsən?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Endirmə tamamlandı!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Endirmə mümkün olmadı:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Endirmənizə qayıtmaq üçün təkrar yoxlaya bilərsiz"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR-ın sıfırlanması alınmır. Ola bilsin ki sən `syslinux` paketini quraşdırmamısan."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Seçilmiş fayl oxunmur. Lütfən, onun icazələrini düzəlt, ya da başqa fayl seç."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Seçilmiş faylın istifadəsi alınmır. ISO-nu əsas yaddaşa köçürsən (məs., C:\\) daha çox şansın olar."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "%(device)s üzərinə yazılma alınmadı, ötürülür."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Tanınmayan ISO, məbləğin yoxlanışı ötürülür"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Ötürücünün quraşdırılmasına cəhd göstərildiyi bir vaxtda bilinməyən dbus kənara çıxması: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seçilmişdir"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Bilinməyən fayl sistemi. Cihazının yenidən formatlanmağa ehtiyacı ola bilər."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Bilinməyən buraxılış: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "'%(udi)s'-nin '%(device)s' üzərində geri quraşdırılması"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "'%(device)s' üzərində quraşdırılmış fayl sisteminin geri quraşdırılması"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dəstəklənməyən '%(device)s' ötürücüsü, problemi mütləq bölüş."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Dəstəklənməyən fayl sistemi: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Dəstəklənməyən fayl sistemi: %s\nLütfən USB açarını FAT fayl sistemi vasitəsilə arxivləşdirib formatla."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "%(system_partition)s sistem bölməsinin seçimlərinin yenilənməsi"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Yüksəlt\nklonlamaqla"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tail-ları Quraşdır"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Yüksəlt\nISO-dan"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Mövcud ISO Canlı sistemini istifadə et"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 məbləğinin yoxlanışı"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "CanlıCD şəklinin SHA1 məbləğinin yoxlanışı..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "CanlıCD şəklinin SHA256 məbləğinin yoxlanışı..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Fayl sisteminin yoxlanışı..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Təhlükə: Yeni daimi sahənin yaradılması mövcud olanı siləcəkdir."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Təhlükə: Bu qurğu Administrator tərəfindən işlədilməlidir. Bunu etmək üçün işarənin üzrəində sağ düyməni sıx və \"Properties\" seçimini et. \"Compatibility tab\" başlığı altında \"Run this program as an administrator\"qutusunu işarələ."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Ötürücüyə %(speed)d MB/sec sürəti ilə yazdı"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Sən Tails-i %(size)s %(vendor)s %(model)s ötürücüsünə (%(device)s) quraşdırmağı planlaşdırısan. Seçilmiş ötürücüdəki bütün məlumat silinəcək. Davam edirsən?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Sən Tails-i %(parent_size)s %(vendor)s %(model)s ötürücüsü (%(device)s) təkmilləşdirməyi planlaşdırırsan. Hər hansı daimi sıxlıq ötürücüdə dəyişilməz qalacaq. Davam edirsən?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Sən ext4 fayl sisteminin dəstəkləmədiyi köhnə syslinux-extlinux versiyanı istifadə edirsən"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Endirmənizə qayıtmaq üçün təkrar yoxlaya bilərsiz"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Bu aplikasiyanı əsas olaraq istifadə etməlisən"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "və ya"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ba/ba.po b/ba/ba.po
index 31fd491..182efc5 100644
--- a/ba/ba.po
+++ b/ba/ba.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bashkir (http://www.transifex.com/otf/torproject/language/ba/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ba\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/be/be.po b/be/be.po
index fda81b6..05cb2fd 100644
--- a/be/be.po
+++ b/be/be.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Belarusian (http://www.transifex.com/otf/torproject/language/be/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: be\n"
"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/bg/bg.po b/bg/bg.po
index 5a948e6..3b44d09 100644
--- a/bg/bg.po
+++ b/bg/bg.po
@@ -4,6 +4,7 @@
#
# Translators:
# aramaic <aramaicbg at gmail.com>, 2015
+# Ivo, 2017
# Kaloyan Doichinov, 2014
# Kaloyan Nikolov <kotipuka01 at gmail.com>, 2016
# 4Joy <kiril.banialiev at gmail.com>, 2015
@@ -15,9 +16,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-05-08 16:27+0000\n"
-"Last-Translator: Kaloyan Nikolov <kotipuka01 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 03:26+0000\n"
+"Last-Translator: Ivo\n"
"Language-Team: Bulgarian (http://www.transifex.com/otf/torproject/language/bg/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -25,591 +26,551 @@ msgstr ""
"Language: bg\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "''Клониране & Инсталиране\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Трябва да изпълните това приложение, както root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Инсталирай от ISO Образ"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Извличане на жив образ към целевото устройство ..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Инсталатор"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Пише устройството на %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s избрано"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Създаване на OLPC boot файлове ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Имаше проблем при изпълнението на следната команда: `%(command)s`.⏎ По-подробен журнал за грешки е написан '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Проверка SHA1 контролна LiveCD на изображението ..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s вече зареждащ"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Проверка SHA256 контролна LiveCD на изображението ..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Нужда от помощ? Прочети<a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.bg.html\"><span style=\" text-decoration: underline; color:#0000ff;\">документацията</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Инсталира Tails на друга USB флашка копирайки Tail системата, която ползвате към момента.</li>\n\n<li>USB флашката на който ще се инсталира, ще бъде форматиран и всички данни ще бъдат загубени.</li>\n\n<li>Криптираната Tails USB флашка, която ползвате не се копира.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Надграждане на друга Tails USB флашка до същата версия на Tails, която ползвате към момента.</li>\n\n<li>Криптираната Tails USB флашка, която надградихте е запазена.</li>\n\n<li>Криптираната Tails USB флашка, която ползвате не се копира.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Надграждане на друга Tails USB флашка към версия за ISO формат.</li>\n\n<li>Криптираната Tails USB флашка, която надгррадихте е запазена.</li>\n\n<li>Криптираната Tails USB флашка, която ползвате не се копира.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Прелисти"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Като отделите допълнително пространство на вашето USB устройство за \"постоянен слой\", ще можете да съхранявате данни и да правите перманентни промени върху активната си операционна система. Без допълнителното пространство няма да може да запазите данни, които да бъдат съхранени след рестартиране."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Изчисляване на SHA1 за %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Грешка: SHA1 на живо CD е невалиден.Можете да стартирате тази програма с -- noverify аргумент да пропуснете тази проверка на проверка."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Не мога да намеря"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Неизвестно ISO, прескача контролна проверка"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Не мога да открия устройството %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Няма достатъчно свободно място на устройството.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Създаване %sMB устойчиви наслагване"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Устройство все още не е монтирано, така че ние не може да определим размера на свободното място."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Свали %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Изтеглянето е завършено!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Невъзможност за копиране на %(infile)s до %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Изтеглянето се провали:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Премахване на съществуващите Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Изтегляне %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Устройство е примка,прескача нулиране на MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Не може да се chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Въвеждане на unmount_device for '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Грешка при сондиране устройство"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Грешка: Не може да се зададе на етикета или да получите UUID на вашето устройство. Неспособен да продължи."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Грешка: SHA1 на живо CD е невалиден.Можете да стартирате тази програма с -- noverify аргумент да пропуснете тази проверка на проверка."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Извличане на жив образ към целевото устройство ..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Не може да премахнете файл от предишния LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Форматиране %(device)s като FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 контролна мина"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Не може да се изтрие директорията от миналия LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 контролна проверка се провали"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Не мога да открия устройството %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ако не изберете съществуващ Live ISO образ, избраното издание ще бъде свалено за вас."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Не мога да запиша на %(device)s, прескачане."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Инсталиране\nчрез клониране"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Някои дялове от целевото устройство %(device)s са монтирани.Те ще бъде демонтирани, преди да започне процеса на инсталация."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Инсталиране на Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Неизвестна файлова система. Вашето устройство може да се наложи да се преформатира."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Инсталацията е извършена!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Неподдържана файлова система: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Инсталацията е извършена! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Непозната GLib грешка по време на прикачване на устройството: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Инсталацията е завършена. Натиснете OK, за да затворите този програм."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Не може да се монтира устройството: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Инсталиране на буутлоудър ..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Не са намерени точки на монтиране"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Невъзможно е да се надгражда на устройство %(pretty_name)s защото не е създадено с помощта на \nTails Installer. Вместо това, вие трябва да използвате %(action)s\nза надграждане на Tails на това устройство."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB създаването неуспешно!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Въвеждане на unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Уверете се да извлечете цялата liveusb-creator zip файл, преди да пуснете тази програма."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Демонтиране на монтирани файлови системи за '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Уверете се, че USB ключ е включен и форматирани с FAT файлова система"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Демонтиране на '%(udi)s' на '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Монтира %s съществува след откачване"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Няма свободно място на устройството %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Разделяне на устройство %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Не са намерени точки на монтиране"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Актуализиране свойства на системния дял %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Няма достатъчно свободно място на устройството.\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Неподдържано устройство '%(device)s', моля, съобщите за бъг."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition is FAT16; Ограничаване на размера до 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Опитвайки да продължи така или иначе."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Дялът е FAT32; Ограничаване на размера до 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Проверка на файловата система ..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Разделяне на устройство %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Невъзможно да промените етикета на обем: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Постоянно съхраняване"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Инсталиране на буутлоудър ..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Постоянно пространство (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "'%s' COM32 модулът не е открит"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Моля, потвърдете избора си за устройство"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Премахване на %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Обновяване на изданията..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s вече зареждащ"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Изданията са обновени!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Не мога да намеря дял"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Премахване на %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Форматиране %(device)s като FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Премахване на съществуващите Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "syslinux' gptmbr.bin не е открит"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Прочитане на изтегления MBR от %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Неуспешно прочитане на изтегленият MBR от %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Възстановяване Master Boot Record of %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Изберете Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Създаване на OLPC boot файлове ..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Устройство е примка,прескача нулиране на MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Някои дялове от целевото устройство %(device)s са монтирани.Те ще бъде демонтирани, преди да започне процеса на инсталация."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Този вид източник не поддържа проверка на ISO MD5 контролна, като прескочите"
+msgid "Calculating the SHA1 of %s"
+msgstr "Изчисляване на SHA1 за %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Синхронизиране на данните на диска ..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Устройство"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Грешка при сондиране устройство"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Устройството \"%(pretty_name)s\" е твърде малко, за да инсталирате Tails (най-малко %(size)s GB се изисква)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Не може да намери каквото и да е поддържано устройство"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Избраният файл не може да бъде прочетен. Моля, поправете правата върху него, или изберете друг файл."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Уверете се, че USB ключ е включен и форматирани с FAT файлова система"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Имаше проблем при изпълнението на следната команда: `%(command)s`.⏎ По-подробен журнал за грешки е написан '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Неподдържана файлова система: %s⏎ Моля, направите резервно копие и форматирате USB ключ с FAT файлова система."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Този бутон ви позволява да разглеждате за съществуващи живи образи на системи , които преди това сте изтеглили. Ако не изберете един, някой ще бъде изтеглен за вас автоматично."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Не може да получи Win32_LogicalDisk; win32com заявка не върна никакви резултати"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Този бутон ще започне процеса на създаване на LiveUSB. Това води до евентуално изтегляне на образ (ако вече съществуващ такъв, не е бил избран), извличане на образа в USB устройството, създаване на устойчиви структура данни и поставяне на буутлоудъра."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Не мога да намеря"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Това е USB стик, на който искате да инсталирате жива система. Това устройство трябва да е форматирано с FAT файлова система."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Уверете се, че деархивирате целият tails-installer zip файл преди да пуснете това приложение."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Неизвестен версия: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Изтегляне %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Това е прогрес лентата , която ще покаже колко далеч в процеса на създаване сте на LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Грешка: Не може да се зададе на етикета или да получите UUID на вашето устройство. Неспособен да продължи."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Това е конзолата на състоянието, където всички съобщения се записват."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Инсталацията е извършена! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Опитвайки да продължи така или иначе."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Инсталацията е неуспешна!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Внимание: Този инструмент трябва да се пуска като администратор. За да направите това, щракнете с десния бутон върху иконата и отвори Properties. В раздела Compatibility tab, маркирайте кутия \"Run this program as an administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails Инсталатор"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB диск е намерен"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Не е открито устройство, на което може да бъде инсталиран Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Невъзможно да промените етикета на обем: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Моля, прикачете USB флашка или SD карта с поне %0.1f ГБ."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Не може да се chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Невъзможност за копиране на %(infile)s до %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Не може да се намери USB drive"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Устройството \"%(pretty_name)s\" е твърде малко, за да инсталирате Tails (най-малко %(size)s GB се изисква)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Не може да намери каквото и да е поддържано устройство"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Инсталиране чрез клониране\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Не мога да намеря дял"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Инсталирай от ISO Образ"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Не може да получи Win32_LogicalDisk; win32com заявка не върна никакви резултати"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Невъзможно е да се надгражда на устройство %(pretty_name)s защото не е създадено с помощта на \nTails Installer. Вместо това, вие трябва да използвате %(action)s\nза надграждане на Tails на това устройство."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Възникна грешка по времен на инсталацията на Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Обновяване на изданията..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Изданията са обновени!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Инсталацията е извършена!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Инсталацията е завършена."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Не може да се монтира устройство"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Не може да се монтира устройството: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Моля, потвърдете избора си за устройство"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Не може да се изтрие директорията от миналия LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Вие ще инсталирате Tails на %(size)s %(vendor)s %(model)s устройство (%(device)s). Всички данни на избраното устройство ще бъдат загубени. Продължавате ли?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Не може да премахнете файл от предишния LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Вие ще надграждане Tails на %(parent_size)s %(vendor)s %(model)s устройство (%(device)s). Всеки устойчив том на това устройство ще остане непроменен. Продължавате ли?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Изтеглянето е завършено!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Изтеглянето се провали:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Можете да опитате отново да възобнови те изтеглянето"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Не може да възстановите MBR. Вие не можете да имате инсталиран `SysLinux пакета '."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Избраният файл не може да бъде прочетен. Моля, поправете правата върху него, или изберете друг файл."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Невъзможност за използване на избрания файл. Може да имате по-голям късмет, ако се движите ISO до root на вашия диск (ie: C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Не мога да запиша на %(device)s, прескачане."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Неизвестно ISO, прескача контролна проверка"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Неизвестна dbus изключение, докато се опитва да се монтира устройство: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s избрано"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Неизвестна файлова система. Вашето устройство може да се наложи да се преформатира."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Неуспешно откриване на LiveOS в ISO-то"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Неизвестен версия: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Неуспешно разпознаване на подлежащото блок устройство: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Демонтиране на '%(udi)s' на '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Възника проблем при изпълняването на `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Демонтиране на монтирани файлови системи за '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' не съществува"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Неподдържано устройство '%(device)s', моля, съобщите за бъг."
+msgid "'%s' is not a directory"
+msgstr "'%s' не е директория"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Неподдържана файлова система: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Пропускане на '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Неподдържана файлова система: %s⏎ Моля, направите резервно копие и форматирате USB ключ с FAT файлова система."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Възникна проблем при изпълнението на `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Актуализиране свойства на системния дял %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Неуспешно отваряне на устройството за запис."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Надграждане\nчрез клониране"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Използване на съществуващо Live системно ISO:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Изберете дистрибуция за изтегляне:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Инсталиране на:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Инсталиране на Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Надграждане\nот ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "За да стартирате Tails инсталатора се нуждаете от ISO файл, който може да бъде итеглен от уебсайта на Tails: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Използвайте съществуващ образ на жива система"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Инсталиране"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Проверка на ISO MD5 контролна"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Инсталиране на Tails на нова USB флашка."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Проверка SHA1 контролна LiveCD на изображението ..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• USB флашката, на която ще се инсталира ще бъде форматирана и всичката ѝ информация ще бъде изгубена."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Проверка SHA256 контролна LiveCD на изображението ..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Обновяване на версията"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Проверка на файловата система ..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Обновяване на версията на Tails USB флашлката до версията на ISO файла."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Внимание: Създаване на нова постоянна наслагване ще изтрие съществуващия си."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Криптираното, постоянно дисково пространство на Tails USB флашката, която обновявате ще бъде запазено."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Внимание: Този инструмент трябва да се пуска като администратор. За да направите това, щракнете с десния бутон върху иконата и отвори Properties. В раздела Compatibility tab, маркирайте кутия \"Run this program as an administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Нуждаете се от помощ? Прочетете <a href=\"https://tails.boum.org/doc/first_steps/installation/\">документацията</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Пише устройството на %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Инсталиране чрез клониране"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Вие ще инсталирате Tails на %(size)s %(vendor)s %(model)s устройство (%(device)s). Всички данни на избраното устройство ще бъдат загубени. Продължавате ли?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Инсталиране на Tails на друга USB флашка, копирайки Tails, който използвате в момента."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Вие ще надграждане Tails на %(parent_size)s %(vendor)s %(model)s устройство (%(device)s). Всеки устойчив том на това устройство ще остане непроменен. Продължавате ли?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Криптираното, постоянно дисково пространство на Tails USB флашката, която използвате в момента, няма да бъде копирано."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Обноване на версията чрез клониране"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Вие използвате стара версия на SysLinux-extlinux, която не поддържа ext4 файлова система"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Обновяване на друга Tails USB флашката до същата версия на Tails, която използвате в момента."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Можете да опитате отново да възобнови те изтеглянето"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Обновяване на версията чрез ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Трябва да изпълните това приложение, както root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Обновяване на друга Tails USB флашка до версията на ISO файл."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "или"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Нуждаете се от помощ? Прочетете <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">документацията</a>"
diff --git a/bn/bn.po b/bn/bn.po
index 8b37661..1e08891 100644
--- a/bn/bn.po
+++ b/bn/bn.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bengali (http://www.transifex.com/otf/torproject/language/bn/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: bn\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr ""
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Cannot find device %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr ""
-
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Download %(distribution)s"
-msgstr ""
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ডাউনলোড সম্পূর্ণ!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:513
#, python-format
-msgid "Downloading %s..."
-msgstr "%s ডাউনলোড করা হচ্ছে..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr ""
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:213
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "ইনস্টলকরণ সম্পূর্ণ!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ইনস্টলকরণ সম্পূর্ণ হয়েছে। এই প্রোগ্রাম বন্ধ করতে ঠিক আছে টিপুন।"
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:890
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:588
-#, python-format
-msgid "No free space on device %(device)s"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s ডাউনলোড করা হচ্ছে..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "ইনস্টলকরণ সম্পূর্ণ!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ডাউনলোড সম্পূর্ণ!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr ""
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/bn_BD/bn_BD.po b/bn_BD/bn_BD.po
index a37f8fb..dc0874d 100644
--- a/bn_BD/bn_BD.po
+++ b/bn_BD/bn_BD.po
@@ -7,9 +7,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2012-10-03 17:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bengali (Bangladesh) (http://www.transifex.com/otf/torproject/language/bn_BD/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: bn_BD\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/bn_IN/bn_IN.po b/bn_IN/bn_IN.po
index 44d7c27..d8c0a57 100644
--- a/bn_IN/bn_IN.po
+++ b/bn_IN/bn_IN.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bengali (India) (http://www.transifex.com/otf/torproject/language/bn_IN/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: bn_IN\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "সমস্যা: আপনার LiveCD এর SHA1-টি অবৈধ। আপনি এই প্রোগ্রামটি --noverify আর্গুমেন্ট এর সাথে ব্যবহার করলে যাচাই করা এড়িয়ে যেতে পারবেন।"
+
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ডাউনলোড সম্পূর্ণ!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ডাউনলোড অসমাপ্ত:"
-
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "%s ডাউনলোড করা হচ্ছে..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "সমস্যা: আপনার ডিভাইসের লেবেল অথবা UUID নির্ধারণ করা সম্ভব হয়নি। এগিয়ে যাওয়া যাবে না।"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "সমস্যা: আপনার LiveCD এর SHA1-টি অবৈধ। আপনি এই প্রোগ্রামটি --noverify আর্গুমেন্ট এর সাথে ব্যবহার করলে যাচাই করা এড়িয়ে যেতে পারবেন।"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:775
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr ""
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "ফাইলসিস্টেম যাচাই করা হচ্ছে..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:980
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB প্রস্তুত করা সম্ভব হয়নি!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "No free space on device %(device)s"
-msgstr ""
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO নির্বাচন করুন"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "অজানা রিলিজ: %s"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s ডাউনলোড করা হচ্ছে..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "সমস্যা: আপনার ডিভাইসের লেবেল অথবা UUID নির্ধারণ করা সম্ভব হয়নি। এগিয়ে যাওয়া যাবে না।"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ডাউনলোড সম্পূর্ণ!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ডাউনলোড অসমাপ্ত:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "অজানা রিলিজ: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "ফাইলসিস্টেম যাচাই করা হচ্ছে..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/bo/bo.po b/bo/bo.po
index d2b168b..2ae5071 100644
--- a/bo/bo.po
+++ b/bo/bo.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Tibetan (http://www.transifex.com/otf/torproject/language/bo/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: bo\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/br/br.po b/br/br.po
index 6f8f0f8..ebb4572 100644
--- a/br/br.po
+++ b/br/br.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Breton (http://www.transifex.com/otf/torproject/language/br/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: br\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/brx/brx.po b/brx/brx.po
index 07cf0c4..53ad54f 100644
--- a/brx/brx.po
+++ b/brx/brx.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bodo (http://www.transifex.com/otf/torproject/language/brx/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: brx\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/bs/bs.po b/bs/bs.po
index 7b5cc72..4c77ab7 100644
--- a/bs/bs.po
+++ b/bs/bs.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Bosnian (http://www.transifex.com/otf/torproject/language/bs/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: bs\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Greška: SHA1 Vašeg Live CD-a je nevažeća. Možete pokrenuti ovaj program sa --noverify argumentom da bi zaobišli ovu provjeru."
+
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Neuspjelo pronalaženje uređaja %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Snimanje završeno!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Snimanje nije uspjelo:"
-
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "Snimanje %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr ""
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodržan sistem datoteka: %s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Greška: Neuspjelo postavljanje oznake ili otkrivanje UUID Vašeg uređaja. Nemoguće nastaviti."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Greška: SHA1 Vašeg Live CD-a je nevažeća. Možete pokrenuti ovaj program sa --noverify argumentom da bi zaobišli ovu provjeru."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:775
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr ""
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Provjeravanje sistema datoteka..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:980
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Stvaranje LiveUSB-a nije uspjelo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pobrinite se da je Vaš USB ključ priključen i formatiran sa FAT sistemom datoteka"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "No free space on device %(device)s"
-msgstr ""
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Odaberi Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pobrinite se da je Vaš USB ključ priključen i formatiran sa FAT sistemom datoteka"
+
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodržan sistem datoteka: %s\nMolimo da sačuvate kopiju Vašeg USB ključa i da ga formatirate sa FAT sistemom datoteka."
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "Nepoznato izdanje: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Snimanje %s..."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Greška: Neuspjelo postavljanje oznake ili otkrivanje UUID Vašeg uređaja. Nemoguće nastaviti."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Snimanje završeno!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Snimanje nije uspjelo:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Možete pokušati ponovo da nastavite svoje snimanje"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nepoznato izdanje: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodržan sistem datoteka: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodržan sistem datoteka: %s\nMolimo da sačuvate kopiju Vašeg USB ključa i da ga formatirate sa FAT sistemom datoteka."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Provjeravanje sistema datoteka..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Upozorenje: Stvaranmje novog trajnog prekrivanja će izbrisati trenutno."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Možete pokušati ponovo da nastavite svoje snimanje"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ca/ca.po b/ca/ca.po
index 8544a2f..e0e8ddc 100644
--- a/ca/ca.po
+++ b/ca/ca.po
@@ -8,7 +8,7 @@
# dartmalak <alvar.sevilla at gmail.com>, 2014
# David Anglada <codiobert at codiobert.es>, 2014
# F Xavier Castane <electromigracion at gmail.com>, 2013
-# MrSpeed Art <oficialredstonehelper at gmail.com>, 2015-2016
+# Guillem Arias Fauste <inactive+Mr_SpeedArt at transifex.com>, 2015-2016
# josep constantí mata <iceberg.jcm at gmail.com>, 2015
# laia_, 2015-2016
# Pau Sellés i Garcia <pau.selles at josoc.cat>, 2013
@@ -17,9 +17,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-05-03 15:18+0000\n"
-"Last-Translator: laia_\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Catalan (http://www.transifex.com/otf/torproject/language/ca/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -27,591 +27,551 @@ msgstr ""
"Language: ca\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clona i Instal·la\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Heu d'executar aquesta aplicació amb accés complet"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instal·la des d'una ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extraient la imatge live al dispositiu de destí..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instal·lador de %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "S'ha escrit al dispositiu a %(speed)d MB/seg"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionat"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configurant l'arxiu OLPC d'arrencada..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Ha hagut un problema en executar l'ordre següent: `%(command)s`.\nS'ha desat a '%(filename)s' un registre d'errors més detallat."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificant la suma de verificació SHA1 de la imatge LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ja pot arrencar"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificant la suma de verificació SHA256 de l'imatge LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Si necessiteu ajuda, llegiu la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentació</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instal·la Tails en un altra memòria USB copiant el sistema Tails que esteu usant ara..</li>\n\n<li>La memòria USB a la qual l'instal·leu serà formatada i totes les dades es perdran.</li>\n\n<li>No es copiarà l'emmagatzematge persistent encriptat de la memòria USB Tails que esteu usant.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualitzeu una altra memòria USB Tails a la mateixa versió Tails que esteu usant ara.</li>\n\n<li>L'emmagatzematge persistent encriptat de la memòria USB Tails que actualitzeu es conservarà.</li>\n\n<li>L'emmagatzematge persistent encriptat de la memòria USB Tails que useu actualment no es copiarà.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualitzeu una altra memòria USB Tails a la versió d'una imatge ISO.</li>\n\n<li>L'emmagatzematge persistent encriptat de la memòria USB Tails que actualitzeu es conservarà.</li>\n\n<li>L'emmagatzematge persistent encriptat de la memòria USB Tails que useu actualment no es copiarà.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navega"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Permetent expai extra a l'USB, podreu emmagatzemar i fer modificacions al vostre sistema operatiu Live. Sense, no podreu desar informació, que es perdrà en reiniciar."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculant la suma de verificació SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Error: El SHA1 del vostre LiveCD és invàlid. Executeu l'aplicació amb l'argument --noverify per saltar-vos aquesta comprovació."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "No s'ha pogut trobar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO desconeguda, s'omet la verificació"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "No s'ha pogut trobar el dispositiu %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "No hi ha prou espai lliure al dispositiu.\n%dMB ISO + %dMB overlay > %dMB d'espai lliure"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creant una capa persistent de %sMB"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "El dispositiu no està muntat; no es pot determinar l'espai disponible."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Baixa %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Baixada completa!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "No s'ha pogut copiar %(infile)s a %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Ha fallat la baixada:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Eliminant el Sistema Operatiu Live existent."
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Baixant %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "La unitat és de tipus virtual de repetició, s'omet el reinici del MBR..."
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "No s'ha pogut chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Entrant a unmount_device de '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error en verificar el dispositiu"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: no s'ha pogut etiquetar o obtenir l'UUID del vostre dispositiu. No es pot de continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Error: El SHA1 del vostre LiveCD és invàlid. Executeu l'aplicació amb l'argument --noverify per saltar-vos aquesta comprovació."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extraient la imatge live al dispositiu de destí..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "No s'ha pogut eliminar l'arxiu del sistema operatu previ: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatant %(device)s a FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Verificació ISO MD5 checksum correcta"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "No s'ha pogut eliminar el directori del Sistema Operatiu previ: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verificació ISO MD5 checksum fallida"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "No s'ha pogut trobar el dispositiu %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Si no seleccioneu una imatge ISO autoarrencable existent, es baixarà la versió seleccionada."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "No s'ha pogut escriure a %(device)s, s'omet."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instal·la \nclonant"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algunes particions del dispositiu de destinació %(device)s estan muntades. Es desmuntaran abans de començar el procés d'instal·lació."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instal·la Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "El sistema de fitxers és desconegut. S'ha de formatar el dispositiu."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instal·lació complerta!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "El sistema de fitxers de %s no està suportat."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instal·lació complerta! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "La instal·lació s'ha complert. Premeu OK per tancar aquest programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "No s'ha pogut muntar el dispositiu: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instal·lant el carregador de l'arrencada… "
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "No es troben els punts de muntatge"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "No es pot actualitzar el dispositiu %(pretty_name)s perquè no ha estat creat usant l'instal·lador de Tails. Hauríeu d'utilitzar %(action)s per actualitzar Tails en aquest dispositiu."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Ha fallat la creació del LiveUSB"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Entrant a unmount_device de '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Recordeu-vos d'extraure el fitxer zip liveusb-creator del tot abans d'executar el programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Desmunant el sistema d'arxius muntat a '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Assegureu-vos que la vostra clau USB estigui connectada i que tingui un sistema de fitxers FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Desmuntant '%(udi)s' a '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "El punt de muntatge %s segueix existint després de desmuntar-lo"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "No queda espai lliure al dispositiu %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Creant particions a %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "No es troben els punts de muntatge"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Actualitzant les propietats de la partició de sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "No hi ha prou espai lliure al dispositiu.\n%dMB ISO + %dMB overlay > %dMB d'espai lliure"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "El dispositiu '%(device)s' no és compatible, si us plau, informeu d'un error."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partició es FAT16: Restringida a menys de 2G per arxiu."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Provant de continuar de totes maneres."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partició és de FAT32: Restringida a menys de 4G per arxiu"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Comprovant el sistema de fitxers..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Creant particions a %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "No s'ha pogut canviar l'etiqueta del volum: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Emmagatzematge persistent"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instal·lant el carregador de l'arrencada… "
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Emmagatzematge persistent (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Confirmeu l'elecció del dispositiu"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Suprimint %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Cercant noves versions..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ja pot arrencar"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Noves versions actualitzades!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "No s'ha pogut trobar la partició"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Suprimint %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatant %(device)s a FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Eliminant el Sistema Operatiu Live existent."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Reconfigurant el Master Boot Record de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Seleccioneu la ISO Live"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configurant l'arxiu OLPC d'arrencada..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "La unitat és de tipus virtual de repetició, s'omet el reinici del MBR..."
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algunes particions del dispositiu de destinació %(device)s estan muntades. Es desmuntaran abans de començar el procés d'instal·lació."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "El tipus de font no accepta la verificació MD5 checksum; s'omet"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculant la suma de verificació SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronitzant les dades del disc..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositiu de destí"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error en verificar el dispositiu"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "El dispositiu \"%(pretty_name)s\" és massa petit per instal·lar-hi el Tails (es necessiten com mínim %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "No s'ha pogut trobar cap dispositiu compatible"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "El fitxer seleccionat no s'ha pogut llegir. Ajusteu els permisos o seleccioneu un altre fitxer."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Assegureu-vos que la vostra clau USB estigui connectada i que tingui un sistema de fitxers FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Ha hagut un problema en executar l'ordre següent: `%(command)s`.\nS'ha desat a '%(filename)s' un registre d'errors més detallat."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "El sistema de fitxers %s no està suportat\nDeseu la informació i formateu la memòria USB amb un sistema de fitxers FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Aquest botó permet desplaçar-se per seleccionar una ISO del sistema autoarrencable que hagueu baixat prèviament. Si no en seleccioneu cap, es baixarà automàticament l'última versió."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "No s'ha pogut obtenir el Win32_LogicalDisk; la consulta win32com no ha donat cap resultat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Aquest botó inicia la creació del LiveUSB. Això implica opcionalment descarregar-ne una versió (si no se n'ha triat cap), extreure la imatge ISO al dispositiu USB, i instal·lar un carregador de l'arrencada."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "No s'ha pogut trobar"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Aquesta és la memòria USB on voleu instalar el sistema Live. Aquest dispositiu s'ha de formatar amb sistema de fitxers FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Versió desconeguda: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Baixant %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Aquesta barra indicarà com avança el procés de creació del LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: no s'ha pogut etiquetar o obtenir l'UUID del vostre dispositiu. No es pot de continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Aquesta és la consola d'estat, on s'escriuen tots els missatges."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instal·lació complerta! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Provant de continuar de totes maneres."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "S'ha trobat la unitat USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Atenció: Aquesta eina necessita ser executada com Administrador. Per fer-ho, premeu el botó dret a la icona i obriu Propietats. Sota la pestanya de Compatibilitat, activeu la casella \"Executa aquest programa com administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "No s'ha pogut canviar l'etiqueta del volum: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "No s'ha pogut chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "No s'ha pogut copiar %(infile)s a %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "No s'ha pogut trobar cap unitat USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "El dispositiu \"%(pretty_name)s\" és massa petit per instal·lar-hi el Tails (es necessiten com mínim %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "No s'ha pogut trobar cap dispositiu compatible"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "No s'ha pogut trobar la partició"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instal·la des d'una ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "No s'ha pogut obtenir el Win32_LogicalDisk; la consulta win32com no ha donat cap resultat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "No es pot actualitzar el dispositiu %(pretty_name)s perquè no ha estat creat usant l'instal·lador de Tails. Hauríeu d'utilitzar %(action)s per actualitzar Tails en aquest dispositiu."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Cercant noves versions..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Noves versions actualitzades!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instal·lació complerta!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "No s'ha pogut muntar el dispositiu."
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "No s'ha pogut muntar el dispositiu: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Confirmeu l'elecció del dispositiu"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "No s'ha pogut eliminar el directori del Sistema Operatiu previ: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Instal·lareu el Tails al dispositiu (%(device)s), de %(size)s %(vendor)s %(model)s. Es perdran totes les dades al dispositiu seleccionat. Voleu continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "No s'ha pogut eliminar l'arxiu del sistema operatu previ: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Actualitzareu els Tails al dispositiu (%(device)s), de %(parent_size)s %(vendor)s %(model)s . Qualsevol volum persistent en aquest dispositiu es mantindrà sense canvis. Voleu continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Baixada completa!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Ha fallat la baixada:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Podeu tornar-ho a intentar per continuar la vostra baixada"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "No s'ha pogut restablir el MBR. Podria no tenir instal·lat el paquet `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "El fitxer seleccionat no s'ha pogut llegir. Ajusteu els permisos o seleccioneu un altre fitxer."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "No s'ha pogut fer servir l'arxiu seleccionat. Moveu l'ISO a l'arrel de la unitat (per exemple: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "No s'ha pogut escriure a %(device)s, s'omet."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO desconeguda, s'omet la verificació"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Hi ha hagut unaexcepció dbus desconegua en provar de muntar el dispositiu: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionat"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "El sistema de fitxers és desconegut. S'ha de formatar el dispositiu."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versió desconeguda: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Desmuntant '%(udi)s' a '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Desmunant el sistema d'arxius muntat a '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "El dispositiu '%(device)s' no és compatible, si us plau, informeu d'un error."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "El sistema de fitxers de %s no està suportat."
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "El sistema de fitxers %s no està suportat\nDeseu la informació i formateu la memòria USB amb un sistema de fitxers FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Actualitzant les propietats de la partició de sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Actualitza\nclonant"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instal·la Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Actualitza\ndes de una ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usa una ISO de sistema Live ja existent"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificant la suma de verificació de l'ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificant la suma de verificació SHA1 de la imatge LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificant la suma de verificació SHA256 de l'imatge LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Comprovant el sistema de fitxers..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Atenció: si creeu una nova capa persistent, n'esborrareu l'existent."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Atenció: Aquesta eina necessita ser executada com Administrador. Per fer-ho, premeu el botó dret a la icona i obriu Propietats. Sota la pestanya de Compatibilitat, activeu la casella \"Executa aquest programa com administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "S'ha escrit al dispositiu a %(speed)d MB/seg"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Instal·lareu el Tails al dispositiu (%(device)s), de %(size)s %(vendor)s %(model)s. Es perdran totes les dades al dispositiu seleccionat. Voleu continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Actualitzareu els Tails al dispositiu (%(device)s), de %(parent_size)s %(vendor)s %(model)s . Qualsevol volum persistent en aquest dispositiu es mantindrà sense canvis. Voleu continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Esteu usant una versió antiga de syslinux-extlinux que no permet l'ús del sistema de fitxers ext4."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Podeu tornar-ho a intentar per continuar la vostra baixada"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Heu d'executar aquesta aplicació amb accés complet"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ceb/ceb.po b/ceb/ceb.po
index b1582c2..cdc72cd 100644
--- a/ceb/ceb.po
+++ b/ceb/ceb.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Cebuano (http://www.transifex.com/otf/torproject/language/ceb/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ceb\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/cs/cs.po b/cs/cs.po
index de43801..0551463 100644
--- a/cs/cs.po
+++ b/cs/cs.po
@@ -13,14 +13,15 @@
# Jiří Vírava <appukonrad at gmail.com>, 2014-2015
# dope <maniak11 at gmail.com>, 2013
# Michal Várady <miko.vaji at gmail.com>, 2015
+# Mikulas Holy, 2017
# Radek Bensch <inactive+Radog at transifex.com>, 2013
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Michal Várady <miko.vaji at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Czech (http://www.transifex.com/otf/torproject/language/cs/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -28,591 +29,551 @@ msgstr ""
"Language: cs\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonovat a nainstalovat\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Tuto aplikaci musíte spouštět jako root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Nainstalovat z ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Rozbalování obrazu na cílové zařízení..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s instalátor"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Zapsáno na zařízení %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s zvolen"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Nastavuji startovací soubor OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Vyskytl se problém s vykonáním následujícího příkazu: '%(command)s'\nPodrobnosti o této chybě byly zapsány do souboru '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Ověřuji kontrolní součet SHA1 obrazu LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s je bootovatelné"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Ověřuji kontrolní součet SHA256 obrazu LiveCD..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Potřebujete nápovědu? Přečtěte si <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentaci</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Chyba: SHA1 vašeho LiveCD je neplatný. Tento program můžete spustit s parametrem --noverify abyste tuto kontrolu přeskočili."
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Neznámé ISO, přeskakuji ověření kontrolního součtu"
+
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Není dostatek místa na zařízení.\n%dMB ISO + %dMB trvalé uložiště > %dMB volné místo"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Vytvářím %sMB překrytí trvalého úložiště"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Prohlížet"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nemohu zkopírovat %(infile)s do %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Vyčleněním speciálního místa na USB disku pro trvalé uložiště, budete schopni ukládat data a trvale upravovat Váš operační systém. Bez trvalého uložiště není možné data uložit pro další start systému."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Odebírám existující Live OS"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Kalkuluji SHA1 %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nemohu změnit oprávnění %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nemohu nalézt"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nemohu odebrat soubor z předchozího LiveOS: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nemohu odebrat složku z předchozího LiveOS: %(message)s"
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Nemohu nalézt zařízení %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Vytvářím %sMB překrytí trvalého úložiště"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nemohu zapisovat na %(device)s, přeskakuji."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Disk ještě nebyl připojen, proto není možné určit množství volného místa."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Některé oddíly, které jsou připojeny na cílovém zařízení %(device)s, budou před zahájením procesu instalace odpojeny."
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Stáhni %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Neznámý souborový systém. Vaše zařízení bude nutné zformátovat."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Stahování dokončeno!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodporovaný systém souborů: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Stahování selhalo: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "Stahuji %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Nemohu připojit zařízení: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Zařízení je smyčka, přeskakuji resetování hlavního bootovacího záznamu"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nenalezeny žádné body připojení"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "Spouští se unmount_device pro '%(device)s'"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Chyba při snímání zařízení"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Chyba: Nelze nastavit jmenovku nebo získat UUID vašeho zařízení. Nemohu pokračovat."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Chyba: SHA1 vašeho LiveCD je neplatný. Tento program můžete spustit s parametrem --noverify abyste tuto kontrolu přeskočili."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Rozbalování obrazu na cílové zařízení..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Odpojuje se připojený souborový systém na '%(device)s'"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formátuji %(device)s jako FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Odpojuje se '%(udi)s' z '%(device)s'"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum prošel"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "Připojení %s existuje po odpojení"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum selhal"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "Vytváří se oddíly na zařízení %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Když nezvolíte existující Live ISO, vybraná verze se stáhne automaticky."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aktualizace vlastností systémového diskového oddílu %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepodporované zařízení '%(device)s', prosím nahlaste chybu"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalace Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Snažím se pokračovat dál."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalace kompletní!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Ověřuji systém souborů..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalace kompletní! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalace proběhla úspěšně. Stiskněte OK pro ukončení."
+msgid "Unable to change volume label: %(message)s"
+msgstr "Není možné změnit jmenovku svazku: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Instaluji bootloader..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Je nemožné upgradovat zařízení %(pretty_name)s protože nebylo vytvořeno pomocí Tails instalátoru. Použijte %(action)s pro upgrade Tails na zařízení."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Vytvoření LiveUSB selhalo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Ujistěte se, že extrahujete celý liveusb-creator zip soubor před spuštěním programu."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Ujistěte se, že váš USB disk je připojen a naformátován na systéme souborů FAT"
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "Připojení %s existuje po odpojení"
+msgid "Removing %(file)s"
+msgstr "Odebírám %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Žádné volné místo na zařízení %(device)s"
+msgid "%s already bootable"
+msgstr "%s je bootovatelné"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nenalezeny žádné body připojení"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nemohu najít oddíl"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Není dostatek místa na zařízení.\n%dMB ISO + %dMB trvalé uložiště > %dMB volné místo"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Oddíl je FAT16; Omezuje velikost na 2GB"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formátuji %(device)s jako FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Oddíl je formátován na FAT32; velikost souborů je omezena na 4 GB"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Vytváří se oddíly na zařízení %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trvalé úložiště"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Trvalé Úložiště (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Potvrďte prosím výběr vašeho zařízení"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Obnovování verzí..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Verze obnoveny!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "Odebírám %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Odebírám existující Live OS"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetuji hlavní bootovací záznam %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Vyberte Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Nastavuji startovací soubor OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Zařízení je smyčka, přeskakuji resetování hlavního bootovacího záznamu"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Některé oddíly, které jsou připojeny na cílovém zařízení %(device)s, budou před zahájením procesu instalace odpojeny."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Typ zdroje nedovoluje ověření pomocí kontrolního součtu ISO MD5, přeskakuji"
+msgid "Calculating the SHA1 of %s"
+msgstr "Kalkuluji SHA1 %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizuji data na disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Cílové zařízení"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Chyba při snímání zařízení"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Zařízení \"%(pretty_name)s\" je moc malé pro instalaci Tails (je vyžadováno alespoň %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nenalezeno žádné podporované zařízení."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Vybraný soubor je nečitelný. Opravte jeho oprávnění nebo vyberte jiný soubor."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Ujistěte se, že váš USB disk je připojen a naformátován na systéme souborů FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Vyskytl se problém s vykonáním následujícího příkazu: '%(command)s'\nPodrobnosti o této chybě byly zapsány do souboru '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodporovaný systém souborů: %s\nProsím proveďte zálohu a naformátujte USB disk systémem souborů FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Toto tlačítko Vám umožňuje najít ISO obraz Live systému, který jste si stáhnuli. Jestliže si žádný nevyberete, ISO bude staženo automaticky."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nemohu získat Win32_LogicalDisk; win32com výsledky"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Tlačítko spustí proces vytváření LiveUSB. To může popřípadě znamenat stažení ISO obrazu (pokud nebyl žádný vybrán) a rozbalení na USB disk, vytvoření trvalého uložiště a nainstalování zavaděče."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nemohu nalézt"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Na tento USB disk bude nainstalován Váš Live systém. Disk musí být zformátován souborovým systémem FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Neznámé vydání: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Stahuji %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Indikátor postupu který zobrazí, jak daleko jste ve vytváření LiveUSB."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Chyba: Nelze nastavit jmenovku nebo získat UUID vašeho zařízení. Nemohu pokračovat."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Toto je informační konsole, kde budou vypsané všechny zprávy."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalace kompletní! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Snažím se pokračovat dál."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB klíč najdený"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Upozornění: Tento nástroj je nutné spustit jako Administrátor. Učiníte tak kliknutím pravým tlačítkem na ikonu a vyberte Vlastnosti. V záložce Kompatibilita vyberte možnost Spustit tento program jako správce."
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
+
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Není možné změnit jmenovku svazku: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nemohu změnit oprávnění %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nemohu zkopírovat %(infile)s do %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nemohu najít žádný USB klíč."
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Zařízení \"%(pretty_name)s\" je moc malé pro instalaci Tails (je vyžadováno alespoň %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nenalezeno žádné podporované zařízení."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nemohu najít oddíl"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Nainstalovat z ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nemohu získat Win32_LogicalDisk; win32com výsledky"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Je nemožné upgradovat zařízení %(pretty_name)s protože nebylo vytvořeno pomocí Tails instalátoru. Použijte %(action)s pro upgrade Tails na zařízení."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Obnovování verzí..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Verze obnoveny!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalace kompletní!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nemohu připojit zařízení"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nemohu připojit zařízení: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Potvrďte prosím výběr vašeho zařízení"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nemohu odebrat složku z předchozího LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Chystáte se nainstalovat Tails velikosti %(size)s na zařízení (%(device)s) %(vendor)s %(model)s. Všechna data na zvoleném zařízení budou ztracena. Pokračovat?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nemohu odebrat soubor z předchozího LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Chystáte se aktualizovat Tails velikosti %(parent_size)s na zařízení (%(device)s) %(vendor)s %(model)s. Jakékoli trvalé svazky na tomto zařízení zůstnou beze změny. Pokračovat?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Stahování dokončeno!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Stahování selhalo: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Zkuste znovu zahájit stahování"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nemohu resetovat hlavní bootovací záznam. Možná nemáte nainstalovaný `syslinux` balíček."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Vybraný soubor je nečitelný. Opravte jeho oprávnění nebo vyberte jiný soubor."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nemohu použít vybraný soubor. Zkuste přesunout ISO do kořenového adresáře vašeho disku (např. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nemohu zapisovat na %(device)s, přeskakuji."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Neznámé ISO, přeskakuji ověření kontrolního součtu"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Neznámá dbus vyjímka při pokusu připojit zařízení: %(message)s "
+msgid "%(filename)s selected"
+msgstr "%(filename)s zvolen"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Neznámý souborový systém. Vaše zařízení bude nutné zformátovat."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Neznámé vydání: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Odpojuje se '%(udi)s' z '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Odpojuje se připojený souborový systém na '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepodporované zařízení '%(device)s', prosím nahlaste chybu"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodporovaný systém souborů: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodporovaný systém souborů: %s\nProsím proveďte zálohu a naformátujte USB disk systémem souborů FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Aktualizace vlastností systémového diskového oddílu %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalace Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Použít existující Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Ověřuji ISO kontrolní součet MD5 "
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Ověřuji kontrolní součet SHA1 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Ověřuji kontrolní součet SHA256 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Ověřuji systém souborů..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Varování: vytvořením nového trvalého úložiště smažete již existující."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Upozornění: Tento nástroj je nutné spustit jako Administrátor. Učiníte tak kliknutím pravým tlačítkem na ikonu a vyberte Vlastnosti. V záložce Kompatibilita vyberte možnost Spustit tento program jako správce."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Zapsáno na zařízení %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Chystáte se nainstalovat Tails velikosti %(size)s na zařízení (%(device)s) %(vendor)s %(model)s. Všechna data na zvoleném zařízení budou ztracena. Pokračovat?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Chystáte se aktualizovat Tails velikosti %(parent_size)s na zařízení (%(device)s) %(vendor)s %(model)s. Jakékoli trvalé svazky na tomto zařízení zůstnou beze změny. Pokračovat?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Používáte starou vezi syslinux-extlinux, které nepodporuje souborový systém ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Zkuste znovu zahájit stahování"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Tuto aplikaci musíte spouštět jako root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "nebo"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/csb/csb.po b/csb/csb.po
index 1d78d95..eaff7cf 100644
--- a/csb/csb.po
+++ b/csb/csb.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kashubian (http://www.transifex.com/otf/torproject/language/csb/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: csb\n"
"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/cv/cv.po b/cv/cv.po
index c259c82..ad44535 100644
--- a/cv/cv.po
+++ b/cv/cv.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Chuvash (http://www.transifex.com/otf/torproject/language/cv/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: cv\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/cy/cy.po b/cy/cy.po
index e02bf0b..82b0a9d 100644
--- a/cy/cy.po
+++ b/cy/cy.po
@@ -3,16 +3,16 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# Christopher Griffiths <transifex at cgriff.co.uk>, 2016
+# ianto <transifex at cgriff.co.uk>, 2016
# Huw Waters <huwwaters at gmail.com>, 2014
# littlegreykida <theinfinitygap at gmail.com>, 2014
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Christopher Griffiths <transifex at cgriff.co.uk>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Welsh (http://www.transifex.com/otf/torproject/language/cy/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: cy\n"
"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n != 8 && n != 11) ? 2 : 3;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonio a Gosod\""
-
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "'Gosod o ISO'"
-
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
-#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Gosodwr %(distribution)s"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(size)s %(label)s"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/creator.py:1097
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%s already bootable"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Pori"
-
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:365
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Yn cyfrifo SHA1 %s"
-
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Cannot find device %s"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:417
-#, python-format
-msgid "Creating %sMB persistent overlay"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Lawrlwytho %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Wedi cwblhau'r lawrlwythiad!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Downloading %s..."
-msgstr "Yn lawrlwytho %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:513
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Gwall: Methu osod y label na chael yr UUID o'ch ddyfais. Methu parhau a'r gweithred."
-
-#: ../liveusb/creator.py:393
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr ""
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Gosod Tails"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Wedi cwblhau'r osodiad!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:775
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Wedi cwblhau'r osodiad! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Mae'r osodiad wedi cwblhau. Pwyswch OK i cau'r rhaglen."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:785
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Methwyd creadigaeth y LiveUSB!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Ddim lle agored ar y ddyfeis %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Mae'r rhaniad yn FAT16; Cyfyngwyd maint y troshaen i 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Storfa Parhaus"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr ""
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
+#, python-format
+msgid "Calculating the SHA1 of %s"
+msgstr "Yn cyfrifo SHA1 %s"
+
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr ""
+
+#: ../tails_installer/creator.py:1477
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Fersiwn anhysbys: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Yn lawrlwytho %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Gwall: Methu osod y label na chael yr UUID o'ch ddyfais. Methu parhau a'r gweithred."
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Wedi cwblhau'r osodiad! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Rhybydd: Mae rhaid i'r teclyn yma cael ei rhedeg fel Gweinyddwr. I gwneud hyn, dde-pwyswch ar yr eicon ac agor Priodweddau. O dan Cyddweddoldeb, ticiwch y focs \"Rhedeg yr program hon fel Gweinyddwr\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
+
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "'Gosod o ISO'"
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Methu darganfod unrhyw dreif USB"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Wedi cwblhau'r osodiad!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Methu esgyn y ddyfais"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Wedi cwblhau'r lawrlwythiad!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Fersiwn anhysbys: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Gosod Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Rhybydd: Wrth greu troshaen parhaus newydd, bydd yr troshaen hen yn gael ei ddileu."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Rhybydd: Mae rhaid i'r teclyn yma cael ei rhedeg fel Gweinyddwr. I gwneud hyn, dde-pwyswch ar yr eicon ac agor Priodweddau. O dan Cyddweddoldeb, ticiwch y focs \"Rhedeg yr program hon fel Gweinyddwr\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/da/da.po b/da/da.po
index 723285e..35d156d 100644
--- a/da/da.po
+++ b/da/da.po
@@ -19,8 +19,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-01-19 09:17+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 16:24+0000\n"
"Last-Translator: scootergrisen\n"
"Language-Team: Danish (http://www.transifex.com/otf/torproject/language/da/)\n"
"MIME-Version: 1.0\n"
@@ -29,591 +29,551 @@ msgstr ""
"Language: da\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klon og installer\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Du skal køre dette program som root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Installer fra ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Udpakker det direkte foto til den valgte enhed..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Skrev til enhed med %(speed)d MB/s"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valgt"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Opretter OLPC opstartsfil..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Der opstod et problem under kørsel af følgende kommando: \"%(command)s\".\nEn mere detaljeret fejllog er blevet skrevet til \"%(filename)s\"."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificerer SHA1-kontrolsum af LiveCD-aftrykket..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s er allerede i stand til at starte"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificerer SHA256-kontrolsum af LiveCD-aftrykket..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Har du brug for hjælp? Læs <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentationen</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installér Tails på yderligere en USB nøgle, ved at kopiere det aktuelle Tails system til USB nøglen..</li>\n\n<li>USB nøglen du har valgt, vil blive formatteret og alle data mistet.</li>\n\n<li>Den permanent krypterede del af TAILS USB nøglen, du aktuelt benytter, bliver ikke kopieret.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Opgrader en anden Tails USB nøgle til samme version, som du bruger nu.</li>\n\n<li>Den krypterede del af Tails USB nøglen bevares.</li>\n\n<li>Den krypterede del af den Tails USB nøgle du bruger nu, vil ikke blive kopieret.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Opgradér en anden Tails USB nøgle til samme version som et ISO diskbillede.</li>\n\n<li>Den krypterede del af Tails USB nøglen bevares.</li>\n\n<li>Den krypterede del af den Tails USB nøgle du bruger nu, vil ikke blive kopieret.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Brows"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Ved at allokere ekstra plads på dit USB drev til et vedvarende overlæg, vil du kunne gemme data og foretage permanente ændringer på dit live operativsystem. Uden vil du ikke kunne gemme data der er tilgængelige efter en genstart."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Beregner SHA1 for %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fejl: SHA1'et på din live-CD er ugyldig. Du kan køre dette program med \"--noverify\"-argumentet for at springe over denne verificeringskontrol."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kan ikke finde"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Ukendt ISO, undlader verifikation af kontrolsum"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Kan ikke finde enhed %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Der er ikke tilstrækkelig ledig plads på enheden.\n%dMB ISO + %dMB ekstra > %dMB fri plads"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Opretter %sMB vedvarende overlæg"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Enheden er endnu ikke monteret, så vi kan ikke bestemme mængden af ledig plads."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Download %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download udført!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kan ikke kopiere %(infile)s til %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download fejlede: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Fjerner eksisterende Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Downloader %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drevet er et loopback, springer nulstilling af MBR over"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Kan ikke chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Starter afmontering for \"%(device)s\""
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Fejl ved undersøgelse af enhed"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fejl: Kunne ikke sætte etiket eller finde enhedens UUID. Kan ikke fortsætte."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fejl: SHA1'et på din live-CD er ugyldig. Du kan køre dette program med \"--noverify\"-argumentet for at springe over denne verificeringskontrol."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Udpakker det direkte foto til den valgte enhed..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Kan ikke fjerne fil fra tidligere LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatterer %(device)s som FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5-kontrolsum verificeret"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Kan ikke fjerne mappe fra tidligere LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verificering af ISO MD5-kontrolsum mislykkedes"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Kan ikke finde enhed %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Hvis du ikke vælger en eksisterende Live ISO, vil den valgte udgivelse blive downloadet for dig."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Kan ikke skrive til %(device)s, springer over."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installér\nved at klone"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Nogle partitioner på den valgte enhed %(device)s er i brug. De vil alle blive skubbet ud før installationen starter."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Ukendt filsystem. Din enhed skal måske formateres igen."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation færdig!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Filsystem understøttes ikke: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation færdig! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Ukendt GLib-undtagelse ved forsøg på at montere enhed: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installation er færdig. Tryk OK for at lukke dette program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Kunne ikke tilslutte enhed: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installerer opstartsindlæser..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Fandt ingen tilslutningspunkter"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Det er ikke muligt at opdatere enheden %(pretty_name)s fordi den ikke er oprettet med Tails Installer. Anvend i stedet %(action)s til at opgradere Tails på denne enhed."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Oprettelse af LiveUSB fejlede!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Starter afmontering for \"%(device)s\""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Vær sikker på at udpakke hele zip-filen liveusb-creator før du kører dette program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Afmonterer monterede filsystemer på \"%(device)s\""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Vær sikker på at din USB-nøgle er tilsluttet og formateret med FAT-filsystemet"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Afmonterer \"%(udi)s\" på \"%(device)s\""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Tilslutning %s eksisterer efter frakobling"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Ingen ledig plads på enhed %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partitionerer enheden %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Fandt ingen tilslutningspunkter"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Opdaterer indstillingerne på system partitionen %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Der er ikke tilstrækkelig ledig plads på enheden.\n%dMB ISO + %dMB ekstra > %dMB fri plads"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Enheden \"%(device)s\" understøttes ikke. Rapporter venligst fejlen."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition er FAT16; begrænser overlagsstørrelse til 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Prøver at forsætte alligevel."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partitionen er FAT32; begrænser ekstra størrelse til 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificerer filsystem..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitionerer enheden %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Kan ikke ændre drev-navn: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Vedvarende lager"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installerer opstartsindlæser..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Vedvarende lager (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Kunne ikke finde '%s' COM32-modulet"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bekræft venligst dit valg af enhed"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Fjerner %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Genopfrisker udgivelser..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s er allerede i stand til at starte"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Udgivelser opdateret!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Kan ikke finde partition"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Fjerner %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatterer %(device)s som FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Fjerner eksisterende Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Kunne ikke finde syslinux' gptmbr.bin"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Læser udtrukket MBR fra %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Kunne ikke læse den udtrukne MBR fra %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Nulstiller Master Boot Record for %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Vælg live-ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Opretter OLPC opstartsfil..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drevet er et loopback, springer nulstilling af MBR over"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Nogle partitioner på den valgte enhed %(device)s er i brug. De vil alle blive skubbet ud før installationen starter."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Kildetype understøtter ikke verificering af ISO MD5-kontrolsum, udelader"
+msgid "Calculating the SHA1 of %s"
+msgstr "Beregner SHA1 for %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synkroniserer data på disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Målenhed"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Fejl ved undersøgelse af enhed"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Enheden \"%(pretty_name)s\" har ikke plads nok til at installere Tails (kræver mindst %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Kunne ikke finde nogen understøttede enheder"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Den valgte fil er ikke læsbar. Du kan enten ændre filtilladelserne eller vælge en anden fil."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Vær sikker på at din USB-nøgle er tilsluttet og formateret med FAT-filsystemet"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Der opstod et problem under kørsel af følgende kommando: \"%(command)s\".\nEn mere detaljeret fejllog er blevet skrevet til \"%(filename)s\"."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Filsystem understøttes ikke: %s\nForetag venligst en sikkerhedskopi og formatér din USB-nøgle med FAT-filsystemet."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Denne knap lader dig browse efter et eksisterende Live system ISO som du tidligere har downloaded. Hvis du ikke vælger en, vil en udgivelse automatisk blive downloadet for dig."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Kan ikke få Win32_LogicalDisk; win32com forespørgslen returnerede ingen resultater"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Denne knap vil starte oprettelsen af LiveUSB. Dette indebærer valgfri download af en udgivelse (hvis en eksisterende ikke blev valgt), udpakning af ISO-aftrykket til USB-enheden, oprettelse af det vedvarende lager og installering af opstartslæseren."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kan ikke finde"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dette er det USB drev som du vil installere dit Live system på. Enheden skal være formatteret med FAT filsystemet."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Sørg for at udtrække hele tails-installationsprogram zip-filen inden dette program køres."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Ukendt udgivelse: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Downloader %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dette er statusbjælken der vil vise hvor langt du er kommet i oprettelsen af LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fejl: Kunne ikke sætte etiket eller finde enhedens UUID. Kan ikke fortsætte."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dette er statuskonsollen som alle meddelelser bliver skrevet til."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation færdig! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Prøver at forsætte alligevel."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails installation mislykkedes!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Advarsel: Dette værktøj skal køres som en administrator. For dette, højreklik på ikonet og åbn egenskaberne. Under kompatibilitetsfanebladet afkrydses boksen »Kør dette program som en administrator«."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails-installationsprogram"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB drev fundet"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Der kunne ikke findes noget egnet enhed til installation af Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Kan ikke ændre drev-navn: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Isæt venligst et USB-flash-drev eller SD-kort på mindst %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Kan ikke chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kan ikke kopiere %(infile)s til %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kunne ikke finde et USB-drev"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Enheden \"%(pretty_name)s\" har ikke plads nok til at installere Tails (kræver mindst %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Kunne ikke finde nogen understøttede enheder"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Installer ved kloning\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Kan ikke finde partition"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Installer fra ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Kan ikke få Win32_LogicalDisk; win32com forespørgslen returnerede ingen resultater"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Det er ikke muligt at opdatere enheden %(pretty_name)s fordi den ikke er oprettet med Tails-installationsprogrammet. Brug i stedet %(action)s til at opgradere Tails på denne enhed."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Der opstod fejl ved installation af Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Genopfrisker udgivelser..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Udgivelser opdateret!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation færdig!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Installation blev fuldført."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Kan ikke tilslutte enhed"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Kunne ikke tilslutte enhed: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bekræft venligst dit valg af enhed"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Kan ikke fjerne mappe fra tidligere LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Du har valgt at installere Tails på %(size)s %(vendor)s %(model)s enheden (%(device)s). Alt data på den valgte enhed tabes. Fortsæt?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Kan ikke fjerne fil fra tidligere LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Du skal til at opgradere Tails på %(parent_size)s %(vendor)s %(model)s enheden (%(device)s). Enhver vedvarende partition på enheden ændres ikke. Fortsæt?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download udført!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download fejlede: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Du kan prøve at genoptage din download"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Kan ikke nulstille MBR. Måske har du ikke installeret \"syslinux\"-pakken."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Den valgte fil er ikke læsbar. Du kan enten ændre filtilladelserne eller vælge en anden fil."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
-msgstr "Kan ikke anvende den valgte fil. Prøv i stedet at flytte din ISO til roden af dit drev (dvs. C:\\)"
-
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Kan ikke skrive til %(device)s, springer over."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Ukendt ISO, undlader verifikation af kontrolsum"
+msgstr "Kan ikke bruge den valgte fil. Prøv i stedet at flytte din ISO til roden af dit drev (dvs. C:\\)"
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Ukendt dbus fejl ved forsøg på at tilslutte enhed: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s valgt"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Ukendt filsystem. Din enhed skal måske formateres igen."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Kunne ikke finde LiveOS på ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Ukendt udgivelse: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Kunne ikke gætte underliggende blokenhed: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Afmonterer \"%(udi)s\" på \"%(device)s\""
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Der opstod et problem ved eksekvering af `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Afmonterer monterede filsystemer på \"%(device)s\""
+msgid "'%s' does not exist"
+msgstr "'%s' findes ikke"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Enheden \"%(device)s\" understøttes ikke. Rapporter venligst fejlen."
+msgid "'%s' is not a directory"
+msgstr "'%s' er ikke en mappe"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Filsystem understøttes ikke: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Springer '%(filename)s' over"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Filsystem understøttes ikke: %s\nForetag venligst en sikkerhedskopi og formatér din USB-nøgle med FAT-filsystemet."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Der opstod et problem ved eksekvering af `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Opdaterer indstillingerne på system partitionen %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Kunne ikke åbne enhed til skrivning."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Opgradér\nved at klone"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Brug eksisterende Live system-ISO:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Vælg en distribution som skal downloades:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Målenhed:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installer Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Opgradér\nfra ISO diskbillede"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "For at køre Tails-installationsprogrammet skal du bruge et ISO-aftryk som kan downloades fra Tails-webstedet: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Brug eksisterende Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installer"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificerer ISO MD5-kontrolsum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Installer Tails på en ny USB-stick."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificerer SHA1-kontrolsum af LiveCD-aftrykket..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• USB-sticken som du installere på formateres og al data går tabt."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificerer SHA256-kontrolsum af LiveCD-aftrykket..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Opgrader"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificerer filsystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Opgrader en Tails USB-stick til versionen af et ISO-aftryk."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Advarsel: Oprettelse af en ny vedvarende overlægning vil slette den eksisterende."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Det krypterede vedvarende lager på Tails USB-sticken som du opgradere bevares."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Advarsel: Dette værktøj skal køres som en administrator. For dette, højreklik på ikonet og åbn egenskaberne. Under kompatibilitetsfanebladet afkrydses boksen »Kør dette program som en administrator«."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Brug for hjælp? Læs <a href=\"https://tails.boum.org/doc/first_steps/installation/\">dokumentationen</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Skrev til enhed med %(speed)d MB/s"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Installer ved kloning"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Du har valgt at installere Tails på %(size)s %(vendor)s %(model)s enheden (%(device)s). Alt data på den valgte enhed tabes. Fortsæt?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Installer Tails på en anden USB-stick ved at kopiere Tails-systemet som du bruger på nuværende tidspunkt."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Du skal til at opgradere Tails på %(parent_size)s %(vendor)s %(model)s enheden (%(device)s). Enhver vedvarende partition på enheden ændres ikke. Fortsæt?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Det krypterede vedvarende lager på Tails USB-sticken som du bruger på nuværende tidspunkt kopieres ikke."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Opgrader ved kloning"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Du anvender en gammel version af syslinux-extlinux der ikke understøtter ext4 filsystemet"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Opgrader en anden Tails USB-stick til den samme version af Tails som du bruger på nuværende tidspunkt."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Du kan prøve at genoptage din download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Opgrader fra ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Du skal køre dette program som root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Opgrader en anden Tails USB-stick til versionen af et ISO-aftryk."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "eller"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Brug for hjælp? Læs <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">dokumentationen</a>"
diff --git a/de/de.po b/de/de.po
index d49835e..cdee773 100644
--- a/de/de.po
+++ b/de/de.po
@@ -14,9 +14,9 @@
# trantor <clucko3 at gmail.com>, 2014
# tbull <tbull at fedoraproject.org>, 2009
# Emilio Salano <unkn0wn_user at posteo.de>, 2016
-# Ettore Atalan <atalanttore at googlemail.com>, 2015
+# Ettore Atalan <atalanttore at googlemail.com>, 2015,2017
# gerhard <listmember at rinnberger.de>, 2013
-# konstibae, 2015
+# Konstantin BB, 2015
# Marcus Nitzschke <marcusni at gmx.de>, 2008
# Mario Baier <mario.baier26 at gmx.de>, 2013
# matsa <matsa at riseup.net>, 2012
@@ -29,20 +29,21 @@
# Chris <ppt23 at lkj.hopto.org>, 2012
# Sacro <Scion at T-Online.de>, 2013
# Sacro <Scion at T-Online.de>, 2012
+# Sebastian Fiele <rawsta at rawsta.de>, 2017
# spriver <spriver at autistici.org>, 2015
-# stefanf <stefan-josia.froschauer at deutschepost.de>, 2015
+# stefanf <inactive+stefanf at transifex.com>, 2015
# Tobias Bannert <tobannert at gmail.com>, 2013
# Tobias Bannert <tobannert at gmail.com>, 2013-2014
# try once, 2015
-# rike, 2014-2015
+# rike, 2014-2015,2017
# Victoria Kerley <VKerley75 at gmail.com>, 2013
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Emilio Salano <unkn0wn_user at posteo.de>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-08 19:47+0000\n"
+"Last-Translator: Sebastian Fiele <rawsta at rawsta.de>\n"
"Language-Team: German (http://www.transifex.com/otf/torproject/language/de/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -50,591 +51,551 @@ msgstr ""
"Language: de\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonen & Installieren\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Sie müssen diese Anwendung mit Administrationsrechten ausführen"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Von ISO installieren\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Live-Abbild auf das Zielmedium extrahieren …"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installationsprogramm"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Es wurde mit %(speed)d MB/sek auf das Gerät geschrieben"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ausgewählt"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC-Boot-Datei wird eingerichtet…"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Es gab ein Problem beim Ausführen des folgenden Befehls »%(command)s«. \nEine detailreichere Fehlerbeschreibung ist hier zu finden: »%(filename)s«"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "SHA1-Prüfsumme des LiveCD-Abbilds wird überprüft …"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s bereits bootfähig"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "SHA256-Prüfsumme des LiveCD-Abbilds wird überprüft …"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Hilfe benötigt? Antworten im <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">Handbuch</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n <li>Sie installieren Tails auf einen anderen USB-Stick, indem Sie das aktuelle Tails System kopieren..</li>\n\n<li>Der USB-Stick, den Sie zum Installieren benutzen, wird formatiert und alle Dateien gehen verloren.</li>\n\n<li>Die verschlüsselte beständige Datenpartition des Tails USB-Stick, den Sie derzeit benutzen, wird nicht kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li> Aktualisieren Sie einen anderen Tails USB-Stick auf die gleiche Tails Version, die Sie derzeit benutzen.</li>\n\n<li>Die verschlüsselte beständige Datenpartition , die Sie aktuallsieren, wird präserviert.</li>\n\n<li>Die verschlüsselte beständige Datenpartition des Tails USB-Stick, den Sie derzeit benutzen, wird nicht kopiert.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Einen anderen Tails USB-Stick auf die Version eines ISO images aktualisieren.</li>\n\n<li>Die verschlüsselte beständige Datenpartition des zu aktualisierenden Tails USB-Sticks bleibt erhalten.</li>\n\n<li>Die verschlüsselte beständige Datenpartition des aktuell benutzten Tails USB-Sticks wird nicht kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Durchsuchen"
-
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:341
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Indem Sie auf dem USB-Speichermedium Platz für eine beständige Speicherpartition reservieren, haben Sie die Möglichkeit Daten zu speichern und permanente Veränderungen an Ihrem Live-Betriebssystem durchzuführen. Ohne diese Anpassung haben Sie keine Möglichkeit Daten zu speichern, die einen Neustart überdauern."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "SHA-1-Summe von %s wird errechnet"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fehler: Die SHA1-Prüfsumme Ihrer Live-CD ist ungültig. Sie können dieses Programm mit dem '--noverify'-Argument ausführen, um die Verifikationsprüfung zu umgehen."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kann nicht gefunden werden"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Unbekanntes ISO-Abbild, überspringe Prüfsummenüberprüfung"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Kann Gerät %s nicht finden"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nicht genug Speicherplatz auf dem Medium.\n%dMB ISO + %dMB Überlagerung > %dMB freier Speicher"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%s MB beständige Speicherpartition wird erstellt"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Das Medium ist momentan nicht eingehängt, sodass wir den freien Speicherplatz nicht bestimmen können."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s herunterladen"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Herunterladen abgeschlossen!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "%(infile)s konnten nicht nach %(outfile)s kopiert werden: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Herunterladen fehlgeschlagen:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Entferne bestehendes Live-OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s wird heruntergeladen …"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Das Laufwerk ist ein Loopback, MBR zurücksetzen wird übersprungen"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Berechtigungen von %(file)s konnten nicht geändert werden: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "unmount_device für »%(device)s«"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Fehler beim Prüfen des Speichermediums"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fehler: Die Bezeichnung kann nicht gesetzt oder die UUID Ihres Speichermediums nicht ermittelt werden. Fortfahren nicht möglich."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fehler: Die SHA1-Prüfsumme Ihrer Live-CD ist ungültig. Sie können dieses Programm mit dem '--noverify'-Argument ausführen, um die Verifikationsprüfung zu umgehen."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Live-Abbild auf das Zielmedium extrahieren …"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Datei einer älteren Live-System-Version konnte nicht entfernt werden: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s wird als FAT32 formatiert"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO-MD5-Prüfsummenprüfung bestanden"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Ordner einer älteren Live-System-Version konnte nicht entfernt werden: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO-MD5-Prüfsummenprüfung schlug fehl"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Kann Gerät %s nicht finden"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Wenn Sie keine existierende Live-ISO auswählen, wird die gewählte Version für Sie heruntergeladen."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Auf %(device)s kann nicht geschrieben werden. Überspringe."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Durch Klonen\ninstallieren"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Einige Partitionen des Ziellaufwerks %(device)s sind eingehängt. Sie werden ausgehängt, bevor die Installation beginnt."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails installieren"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Unbekanntes Dateisystem. Eventuell muss das Speichermedium neu formatiert werden."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation abgeschlossen!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nicht unterstütztes Dateisystem: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation abgeschlossen! (%s) "
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Unbekannte GLib-Ausnahme beim Versuch das Gerät einzuhängen: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installation abgeschlossen. OK drücken, um das Programm zu schließen."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Speichermedium konnte nicht eingehängt werden: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Bootloader wird installiert …"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Keine Einhängepunkte gefunden"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Es ist nicht möglich, den Datenträger %(pretty_name)s zu aktualisieren, da er nicht mit dem Tails Installer erstellt wurde. Sie sollten stattdessen %(action)s benutzen, um Tails auf diesem Datenträger zu aktualisieren."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB-Erstellung fehlgeschlagen!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "unmount_device für »%(device)s«"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Stellen Sie sicher, dass die gesamte Zip-Datei des LiveUSB-Creators entpackt wurde, bevor Sie dieses Programm starten."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Eingehängtes Dateisystem auf %(device)s wird ausgehängt"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Stellen Sie sicher, dass Ihr USB-Medium eingesteckt und mit einem FAT-Dateisystem formatiert ist"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "'%(udi)s' auf '%(device)s' wird ausgehängt"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount %s existiert noch nach dem Aushängen"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Kein freier Platz auf dem Medium %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Speichermedium %(device)s wird partitioniert"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Keine Einhängepunkte gefunden"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Die Eigenschaften der Systempartition %(system_partition)s werden aktualisiert"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nicht genug Speicherplatz auf dem Medium.\n%dMB ISO + %dMB Überlagerung > %dMB freier Speicher"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nicht unterstütztes Medium »%(device)s«, bitte melden Sie einen Fehler."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition ist FAT16. Beschränkung der maximalen Dateigröße auf 2GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Es wird trotzdem versucht, fortzufahren."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Die Partition ist FAT32; maximale Dateigröße wird auf 4GB beschränkt"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Dateisystem wird überprüft …"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Speichermedium %(device)s wird partitioniert"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Datenträgerbeschreibung konnte nicht geändert werden: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Beständiger Speicherbereich"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Bootloader wird installiert …"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Beständiger Speicherbereich (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "COM32-Modul '%s' konnte nicht gefunden werden"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bitte bestätigen Sie Ihre Geräteauswahl"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Entferne %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Veröffentlichungen werden aktualisiert …"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s bereits bootfähig"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Veröffentlichungen wurden aktualisiert!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Partition konnte nicht gefunden werden"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Entferne %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s wird als FAT32 formatiert"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Entferne bestehendes Live-OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "gptmbr.bin von syslinux konne nicht gefunden werden"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Extrahierter MBR von %s wird gelesen"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Extrahierter MBR aus %(path)s konnte nicht gelesen werden"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Master-Boot-Record von %s wird zurückgesetzt"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO-Abbild wählen"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC-Boot-Datei wird eingerichtet…"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Das Laufwerk ist ein Loopback, MBR zurücksetzen wird übersprungen"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Einige Partitionen des Ziellaufwerks %(device)s sind eingehängt. Sie werden ausgehängt, bevor die Installation beginnt."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Quelltyp unterstützt die Verifizierung einer ISO-MD5-Prüfsumme nicht, überspringen"
+msgid "Calculating the SHA1 of %s"
+msgstr "SHA-1-Summe von %s wird errechnet"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Daten auf dem Datenträger werden synchronisiert…"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Zielmedium"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Fehler beim Prüfen des Speichermediums"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Der Datenträger \"%(pretty_name)s\" ist zu klein, um Tails darauf zu installieren (mindestens %(size)s GB werden benötigt)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Es wurde kein unterstütztes Speichermedium gefunden"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Die ausgewählte Datei konnte nicht gelesen werden. Bitte korrigieren Sie die Berechtigungen oder wählen Sie eine andere Datei aus."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Stellen Sie sicher, dass Ihr USB-Medium eingesteckt und mit einem FAT-Dateisystem formatiert ist"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Es gab ein Problem beim Ausführen des folgenden Befehls »%(command)s«. \nEine detailreichere Fehlerbeschreibung ist hier zu finden: »%(filename)s«"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nicht unterstütztes Dateisystem: %s\nBitte erstellen Sie eine Datensicherung und formatieren Sie Ihren USB-Stick mit einem FAT-Dateisystem."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Mit dieser Schaltfläche können Sie eine zuvor heruntergeladene Live-System-ISO auswählen. Sollten Sie keine auswählen, wird automatisch eine aktuelle Veröffentlichung heruntergeladen."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk konnte nicht ermittelt werden; der win32com-Aufruf lieferte keinerlei Resultate"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Diese Schaltgläche startet den Prozess zur Erstellung eines LiveUSB-Mediums. Dies beinhaltet auch das Herunterladen einer Tails-Version (sollte kein existierendes Abbild ausgewählt worden sein), das Entpacken der ISO-Datei auf das Speichermedium, die Erstellung der Persistent-Datei und die Installation des Bootloaders."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kann nicht gefunden werden"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Das ist das USB-Speichermedium, auf dem Sie das Live System installieren möchten. Das Medium muss mit dem FAT-Dateisystem formatiert sein."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Unbekannte Version: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s wird heruntergeladen …"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dies ist die Fortschrittsanzeige, die anzeigt, wie weit der LiveUSB Erstellungsprozess ist."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fehler: Die Bezeichnung kann nicht gesetzt oder die UUID Ihres Speichermediums nicht ermittelt werden. Fortfahren nicht möglich."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dies ist die Statuskonsole, wo alle Nachrichten hingeschrieben werden."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation abgeschlossen! (%s) "
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Es wird trotzdem versucht, fortzufahren."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails-Installation fehlgeschlagen!"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB-Speichermedium gefunden"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Warnung: Dieses Werkzeug muss mit Administrationsrechten ausgeführt werden. Um dies zu tun, klicken Sie mit der rechten Maustaste auf das Programmsymbol und öffnen Sie dort die Eigenschaften. Setzen Sie nun einen Haken bei »Programm als Administrator ausführen« im Reiter »Kompatibilität«."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails-Installationsprogramm"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Datenträgerbeschreibung konnte nicht geändert werden: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Berechtigungen von %(file)s konnten nicht geändert werden: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "%(infile)s konnte nicht nach %(outfile)s kopiert werden: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kein USB-Speichermedium gefunden"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Der Datenträger \"%(pretty_name)s\" ist zu klein, um Tails darauf zu installieren (mindestens %(size)s GB werden benötigt)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Es konnte kein unterstütztes Medium gefunden werden"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Durch Klonen installieren\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Partition konnte nicht gefunden werden"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ISO-Abbild installieren\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk konnte nicht ermittelt werden; der win32com-Aufruf lieferte keinerlei Resultate"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Es ist nicht möglich, den Datenträger %(pretty_name)s zu aktualisieren, da er nicht mit dem Tails Installer erstellt wurde. Sie sollten stattdessen %(action)s benutzen, um Tails auf diesem Datenträger zu aktualisieren."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Bei der Installation von Tails ist ein Fehler aufgetreten"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Veröffentlichungen werden aktualisiert …"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Veröffentlichungen wurden aktualisiert!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation abgeschlossen!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Installation wurde abgeschlossen."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
-msgstr "Medium kann nicht einhängt werden"
+msgstr "Speichermedium kann nicht einhängt werden"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Medium konnte nicht eingehängt werden: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bitte bestätigen Sie Ihre Geräteauswahl"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Ordner einer älteren LiveOS-Version konnte nicht entfernt werden: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Sie sind dabei, Tails auf folgendem Medium zu installieren: %(size)s %(vendor)s %(model)s (%(device)s). Alle Daten auf dem ausgewählten Medium gehen verloren. Fortfahren?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Datei einer älteren LiveOS-Version konnte nicht entfernt werden: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Sie führen eine Aktualisierung von Tails auf folgendem Medium %(parent_size)s %(vendor)s %(model)s (%(device)s) durch. Alle beständigen Speicherbereiche auf diesem Medium bleiben unverändert. Fortfahren?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Herunterladen abgeschlossen!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Herunterladen fehlgeschlagen:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Sie können versuchen, das Herunterladen fortzusetzen"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR konnte nicht zurückgesetzt werden. Möglicherweise ist das Paket »syslinux« nicht installiert"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Die ausgewählte Datei konnte nicht gelesen werden. Bitte korrigieren Sie die Berechtigungen oder wählen Sie eine andere Datei aus."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
-msgstr "Die ausgewählte Datei kann nicht verwendet werden. Möglicherweise funktioniert es, wenn Sie die ISO Datei direkt in einem Laufwerk (z.B. C:\\) ablegen."
-
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Auf %(device)s kann nicht geschrieben werden. Es wird übersprungen."
+msgstr "Die ausgewählte Datei kann nicht verwendet werden. Vielleicht haben Sie mehr Glück, wenn Sie das ISO-Abbild in das Wurzelverzeichnis Ihres Laufwerkes verschieben."
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Unbekannte ISO-Datei, Prüfsummenüberprüfung wird übersprungen"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Unbekannte dbus-Ausnahme während des Einhängens des Gerätes: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s ausgewählt"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Unbekanntes Dateisystem für %s. Ihr Gerät muss neu formatiert werden."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Kein LiveOS auf der ISO gefunden."
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Unbekannte Version: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "»%(udi)s« auf »%(device)s« wird ausgehängt"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Es gab ein Problem bei der Ausführung von `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Eingehängtes Dateisystem auf %(device)s wird ausgehängt"
+msgid "'%s' does not exist"
+msgstr "'%s' ist nicht vorhanden"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nicht unterstütztes Medium »%(device)s«, bitte melden Sie einen Fehler."
+msgid "'%s' is not a directory"
+msgstr "'%s' ist kein Ordner"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nicht unterstütztes Dateisystem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "'%(filename)s' wird übersprungen"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nicht unterstütztes Dateisystem: %s\nBitte erstellen Sie eine Datensicherung und formatieren Sie Ihren USB-Stick mit einem FAT-Dateisystem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Es gab ein Problem bei der Ausführung von `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Die Eigenschaften der Systempartition %(system_partition)s werden aktualisiert"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Gerät konnte nicht zum Schreiben geöffnet werden."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Durch Klonen\naktualisieren"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Vorhandene Live-System-ISO verwenden"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Wählen Sie eine Distribution zum Herunterladen aus:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Zielgerät:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails installieren"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Aus ISO\naktualisieren"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Existierende Live-System-ISO benutzen"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installieren"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO-MD5-Prüfsumme wird überprüft"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Installieren Sie Tails auf einem neuen USB-Stick."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "SHA1-Prüfsumme des LiveCD-Abbildes wird überprüft …"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "SHA256-Prüfsumme des LiveCD-Abbildes wird überprüft …"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Aktualisieren"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Dateisystem wird überprüft …"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Warnung: Das Erzeugen eines neuen beständigen Speicherbereichs löscht den vorhandenen."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Warnung: Dieses Werkzeug muss mit Administrationsrechten ausgeführt werden. Um dies zu tun, klicken Sie mit der rechten Maustaste auf das Programmsymbol und öffnen Sie dort die Eigenschaften. Setzen Sie nun einen Haken bei »Programm als Administrator ausführen« im Reiter »Kompatibilität«."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Es wurde mit %(speed)d MB/sek auf das Gerät geschrieben"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Durch Klonen installieren"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Sie sind dabei, Tails auf folgendem Medium zu installieren: %(size)s %(vendor)s %(model)s (%(device)s). Alle Daten auf dem ausgewählten Medium gehen verloren. Fortfahren?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Sie führen eine Aktualisierung von Tails auf folgendem Medium %(parent_size)s %(vendor)s %(model)s (%(device)s) durch. Alle beständigen Speicherbereiche auf diesem Medium bleiben unverändert. Fortfahren?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Durch Klonen aktualisieren"
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Sie verwenden eine alte Version von syslinux-extlinux, die das ext4 Dateisystem nicht unterstützt"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Sie können versuchen, das Herunterladen fortzusetzen"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Von ISO aktualisieren"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Sie müssen diese Anwendung mit Administrationsrechten ausführen"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "oder"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Brauchen Sie Hilfe? Lesen Sie die <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">Dokumentation</a>"
diff --git a/dz/dz.po b/dz/dz.po
index 519c570..4bc950f 100644
--- a/dz/dz.po
+++ b/dz/dz.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Dzongkha (http://www.transifex.com/otf/torproject/language/dz/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: dz\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/el/el.po b/el/el.po
index f360d96..790b45e 100644
--- a/el/el.po
+++ b/el/el.po
@@ -5,7 +5,7 @@
# Translators:
# Adrian Pappas <pappasadrian at gmail.com>, 2013
# LOUKAS SKOUROLIAKOS, 2015
-# Chris Kon <konsta1997 at gmail.com>, 2015
+# Χρήστος Κων. <konsta1997 at gmail.com>, 2015
# firespin <dartworldgr at hotmail.com>, 2014
# LaScapigliata <ditri2000 at hotmail.com>, 2015
# dpdt1 <dpdt1 at espiv.net>, 2013
@@ -15,15 +15,15 @@
# kotkotkot <kotakota at gmail.com>, 2012
# metamec, 2015
# nikcha <nikosx at gmail.com>, 2008
-# platonas <platonas at gmail.com>, 2013
+# platonas, 2013
# Wasilis Mandratzis <inactive+Wasilis at transifex.com>, 2013
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: metamec\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Greek (http://www.transifex.com/otf/torproject/language/el/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +31,551 @@ msgstr ""
"Language: el\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Κλωνοποίηση & Εγκατάσταση\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Πρέπει να τρέξετε αυτή την εφαρμογή ως διαχειριστής (root)"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Εγκατάσταση από το ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Εξαγωγή ζωντανής εικόνας στην επιλεγμένη συσκευή..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Πρόγραμμα εγκατάστασης %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Έγινε εγγραφή στην συσκευή με ταχύτητα %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "επιλέχθηκαν %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Ρύθμιση του αρχείου εκκίνησης για το OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Παρουσιάστηκε πρόβλημα κατά την εκτέλεση της ακόλουθης εντολής: `%(command)s`.\nΈχει γραφεί λεπτομερέστερη εγγραφή σφάλματος στο '%(filename)s' ."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Επαλήθευση του αθροίσματος ελέγχου SHA1 της εικόνας του LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ήδη επανεκκινήσιμο"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Επαλήθευση του αθροίσματος ελέγχου SHA256 της εικόνας του LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Χρειάζεστε βοήθεια; Διαβάστε την <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">τεκμηρίωση</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Εγκατάσταση του Tails σε άλλο USB stick αντιγράφοντας το σύστημα Tails που χρησιμοποιείτε αυτή τη στιγμή.</li>\n\n<li>Το USB stick στο οποίο θα γίνει η εγκατάσταση θα διαμορφωθεί και όλα τα δεδομένα του θα σβηστούν.</li>\n\n<li>Ο κρυπτογραφημένος μόνιμος τόμος που χρησιμοποιείτε στο USB stick του Tails δεν θα αντιγραφεί.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Αναβάθμιση ενός USB stick του Tails στην ίδια έκδοση με αυτή του συστήματος Tails που χρησιμοποιείτε αυτή τη στιγμή.</li>\n\n<li>Ο κρυπτογραφημένος μόνιμος τόμος του USB stick του Tails που θα αναβαθμίσετε θα διατηρηθεί.</li>\n\n<li>Ο κρυπτογραφημένος μόνιμος τόμος που χρησιμοποιείτε στο USB stick του Tails δεν θα αντιγραφεί.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Αναβάθμιση ενός USB stick του Tails στην ίδια έκδοση με αυτή μιας εικόνας ISO του Tails.</li>\n\n<li>Ο κρυπτογραφημένος μόνιμος τόμος του USB stick του Tails που θα αναβαθμίσετε θα διατηρηθεί.</li>\n\n<li>Ο κρυπτογραφημένος μόνιμος τόμος που χρησιμοποιείτε στο USB stick του Tails δεν θα αντιγραφεί..</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Περιήγηση"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Με την κατανομή του επιπλέον χώρου στο USB stick για μόνιμο χώρο, θα είστε σε θέση να αποθηκεύσετε τα δεδομένα και να κάνετε συνεχείς τροποποιήσεις στο λειτουργικό σας σύστημα. Χωρίς αυτή την επιλογή, δε θα είστε σε θέση να αποθηκεύσετε δεδομένα που να διατηρούνται μετά από επανεκκίνηση. "
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Υπολογισμός του SHA1 για το %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Σφάλμα: Το SHA1 του Live CD σας δεν είναι έγκυρο. Μπορείτε να εκτελέσετε το πρόγραμμα με την παράμετρο --noverify για να παρακάμψετε τον έλεγχο επιβεβαίωσης."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Αδυναμία εύρεσης"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Άγνωστο ISO, παράκαμψη επαλήθευσης αθροίσματος ελέγχου."
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Αδυναμία εύρεσης συσκευής %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Δεν υπάρχει αρκετός ελεύθερος χώρος στη συσκευή.\n%dMB ISO + %dMB overlay > %dMB ελεύθερου χώρου"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Δημιουργία %sMB μόνιμου χώρου"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Η συσκευή δεν έχει ακόμη προσαρτηθεί, οπότε δεν μπορεί να προσδιοριστεί το μέγεθος του ελεύθερου χώρου."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Λήψη %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Η λήψη ολοκληρώθηκε!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Αδυναμία αντιγραφής %(infile)s στο %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Η λήψη απέτυχε:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Αφαίρεση υπάρχοντος Live Λειτουργικού"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Γίνεται λήψη %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Η συσκευή είναι loopback. Παρακάμπτεται η επαναφορά του MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Αδυναμία εφαρμογής chmod στο/στα αρχείο/α %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Εισαγωγή unmount_device για '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Σφάλμα κατά τον έλεγχο της συσκευής"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Σφάλμα: Αδυναμία ορισμού της ετικέτας ή λήψης του UUID της συσκευής σας. Αδυναμία συνέχειας."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Σφάλμα: Το SHA1 του Live CD σας δεν είναι έγκυρο. Μπορείτε να εκτελέσετε το πρόγραμμα με την παράμετρο --noverify για να παρακάμψετε τον έλεγχο επιβεβαίωσης."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Εξαγωγή ζωντανής εικόνας στην επιλεγμένη συσκευή..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Αδυναμία απομάκρυνσης αρχείου από προηγούμενο LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Η συσκευή %(device)s διαμορφώνεται ως FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "To άθροισμα ελέγχου MD5 του ISO επιβεβαιώθηκε"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Αδυναμία απομάκρυνσης καταλόγου από προηγούμενο LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Η επαλήθευση του αθροίσματος ελέγχου MD5 του ISO απέτυχε"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Αδυναμία εύρεσης συσκευής %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Αν δεν επιλέξετε ένα υπάρχον Live ISO, η επιλεγμένη έκδοση θα ληφθεί για εσάς."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Αδυναμία εγγραφής στο %(device)s, παράκαμψη."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Εγκατάσταση\nμέσω κλωνοποίησης"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Κάποιες κατατμήσεις του δίσκου %(device)s είναι προσαρτημένες. Θα αποσυνδεθούν πριν ξεκινήσει η διαδικασία εγκατάστασης."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Εγκατάσταση του Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Άγνωστο σύστημα αρχείων. Η συσκευή μπορεί να χρειάζεται διαμόρφωση."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Η εγκατάσταση ολοκληρώθηκε!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Μη υποστηριζόμενο σύστημα αρχείων: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Η εγκατάσταση ολοκληρώθηκε! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Η εγκατάσταση έχει ολοκληρωθεί. Πιέστε το OK για να κλείσετε αυτό το πρόγραμμα."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Αδυναμία προσάρτησης συσκευής: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Εγκατάσταση φορτωτή εκκίνησης..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Δεν βρέθηκαν σημεία προσάρτησης"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Είναι αδύνατο να αναβαθμίσετε τη συσκευή %(pretty_name)s επειδή δεν έχει δημιουργηθεί χρησιμοποιώντας το Tails Installer. Πρέπει να χρησιμοποιήσετε %(action)s για να αναβαθμίσετε το Tails σε αυτή τη συσκευή."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Η δημιουργία LiveUSB απέτυχε!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Εισαγωγή unmount_device για '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Πριν εκτελέσετε το πρόγραμμα αυτό, βεβαιωθείτε ότι έχετε εξαγάγει το συμπιεσμένο αρχείο του liveusb-creator."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Αποπροσάρτηση προσαρτημένων συστημάτων αρχείων σε '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Σιγουρευτείτε ότι το USB stick σας είναι συνδεδεμένο και διαμορφωμένο σε σύστημα αρχείων FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Αποπροσάρτηση '%(udi)s' σε '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Η προσάρτηση %s παραμένει μετά την αποπροσάρτηση"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Δεν υπάρχει ελεύθερος χώρος στη συσκευή %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Κατάτμηση συσκευής %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Δεν βρέθηκαν σημεία προσάρτησης"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Ενημέρωση ιδιοτήτων της κατάτμησης συστήματος %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Δεν υπάρχει αρκετός ελεύθερος χώρος στη συσκευή.\n%dMB ISO + %dMB overlay > %dMB ελεύθερου χώρου"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Μη υποστηριζόμενη συσκευή '%(device)s', παρακαλούμε να αναφέρετε το σφάλμα."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Ο τύπος της κατάτμησης είναι FAT16. Περιορισμός του χώρου επικάλυψης στα 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Προσπάθεια να συνεχίσετε ούτως ή άλλως."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Η κατάτμηση είναι FAT32. Περιορισμός του χώρου επικάλυψης σε 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Έλεγχος συστήματος αρχείων..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Κατάτμηση συσκευής %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Αδυναμία αλλαγής της ετικέτας του τόμου: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Μόνιμος χώρος αποθήκευσης"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Εγκατάσταση φορτωτή εκκίνησης..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Μόνιμος χώρος αποθήκευσης (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Παρακαλώ επιβεβαιώστε την επιλογή συσκευής"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Απομακρύνονται τα %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Ανανέωση εκδόσεων..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ήδη επανεκκινήσιμο"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Η ανανεωση πετυχε!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Αδυναμία εντοπισμού κατάτμησης"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Απομακρύνονται τα %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Η συσκευή %(device)s διαμορφώνεται ως FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Αφαίρεση υπάρχοντος Live Λειτουργικού"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Επαναφορά Master Boot Record στο %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Επιλέξτε Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Ρύθμιση του αρχείου εκκίνησης για το OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Η συσκευή είναι loopback. Παρακάμπτεται η επαναφορά του MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Κάποιες κατατμήσεις του δίσκου %(device)s είναι προσαρτημένες. Θα αποσυνδεθούν πριν ξεκινήσει η διαδικασία εγκατάστασης."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Ο τύπος της πηγής δεν επιτρέπει επαλήθευση του αθροίσματος ελέγχου MD5 του ISO, παράκαμψη"
+msgid "Calculating the SHA1 of %s"
+msgstr "Υπολογισμός του SHA1 για το %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Γίνεται συγχρονισμός των δεδομένων δίσκου..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Στοχος"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Σφάλμα κατά τον έλεγχο της συσκευής"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Η συσκευή \"%(pretty_name)s\" είναι πολύ μικρή για να εγκαταστήσετε το Tails (απαιτούνται τουλάχιστον %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Δεν βρέθηκε συμβατή συσκευή"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Το συγκεκριμένο αρχείο δεν μπορεί να αναγνωσθεί. Παρακαλώ διορθώστε τα δικαιώματά του ή διαλέξτε άλλο αρχείο."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Σιγουρευτείτε ότι το USB stick σας είναι συνδεδεμένο και διαμορφωμένο σε σύστημα αρχείων FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Παρουσιάστηκε πρόβλημα κατά την εκτέλεση της ακόλουθης εντολής: `%(command)s`.\nΈχει γραφεί λεπτομερέστερη εγγραφή σφάλματος στο '%(filename)s' ."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Μη υποστηριζόμενο σύστημα αρχείων: %s\nΠαρακαλώ δημιουργείστε ένα αντίγραφο ασφαλείας και μορφοποιήστε τη συσκευή USB σε σύστημα αρχείων FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Το κουμπί σας επιτρέπει να περιηγηθείτε σε ένα υπάρχον Live system ISO το οποίο έχει ήδη ληφθεί. Αν δεν επιλέξετε κάποιο, μια έκδοση θα ληφθεί αυτόματα για σας."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Αδυναμία λήψης του Win32_LogicalDisk· η αναζήτηση του win32com δεν απέδωσε αποτελέσματα"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Αυτό το κουμπί θα ξεκινήσει τη διαδικασία δημιουργίας ενός LiveUSB . Αυτό συνεπάγεται το προαιρετικό κατέβασμα μιας έκδοσης του Tails (αν δεν επιλέξατε μια υπάρχουσα έκδοση), την εξαγωγή του ISO στη συσκευή USB, τη δημιουργία του μόνιμου χώρου, καθώς και την εγκατάσταση του φορτωτή εκκίνησης."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Αδυναμία εύρεσης"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Αυτό είναι το USB stick στο οποίο θέλετε να εγκαταστήσετε το Live λειτουργικό σύστημά σας. Αυτή η συσκευή πρέπει να διαμορφωθεί με σύστμα αρχείων FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Άγνωστη έκδοση: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Γίνεται λήψη %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Αυτή είναι η γραμμή προόδου που θα δείχνει πόσο μακριά βρισκεστε στη διαδικασία δημιουργίας liveusb "
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Σφάλμα: Αδυναμία ορισμού της ετικέτας ή λήψης του UUID της συσκευής σας. Αδυναμία συνέχειας."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Αυτή είναι η κονσόλα κατάστασης, όπου γράφονται όλα τα μηνύματα."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Η εγκατάσταση ολοκληρώθηκε! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Προσπάθεια να συνεχίσετε ούτως ή άλλως."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Βρέθηκε συσκευή USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Προειδοποίηση: Αυτό το εργαλείο πρέπει να εκτελεστεί ως Διαχειριστής. Για να το κάνετε αυτό, κάντε δεξί κλικ πάνω στο εικονίδιο και ανοίξτε τις Ιδιότητες. Στην καρτέλα Συμβατότητας, ενεργοποιήστε το κουτάκι \"Εκτέλεσε αυτό το πρόγραμμα ως διαχειριστής\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Αδυναμία αλλαγής της ετικέτας του τόμου: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Αδυναμία εφαρμογής chmod στο/στα αρχείο/α %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Αδυναμία αντιγραφής %(infile)s στο %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Αδυναμία εύρεσης δίσκου USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Η συσκευή \"%(pretty_name)s\" είναι πολύ μικρή για να εγκαταστήσετε το Tails (απαιτούνται τουλάχιστον %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Δεν βρέθηκε συμβατή συσκευή"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Αδυναμία εντοπισμού κατάτμησης"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Εγκατάσταση από το ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Αδυναμία λήψης του Win32_LogicalDisk· η αναζήτηση του win32com δεν απέδωσε αποτελέσματα"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Είναι αδύνατο να αναβαθμίσετε τη συσκευή %(pretty_name)s επειδή δεν έχει δημιουργηθεί χρησιμοποιώντας το Tails Installer. Πρέπει να χρησιμοποιήσετε %(action)s για να αναβαθμίσετε το Tails σε αυτή τη συσκευή."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Ανανέωση εκδόσεων..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Η ανανεωση πετυχε!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Η εγκατάσταση ολοκληρώθηκε!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Αδυναμία προσάρτησης συσκευής"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Αδυναμία προσάρτησης συσκευής: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Παρακαλώ επιβεβαιώστε την επιλογή συσκευής"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Αδυναμία απομάκρυνσης καταλόγου από προηγούμενο LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Πρόκειται να εγκαταστήσετε το Tails στο %(size)s %(vendor)s %(model)s δίσκο (%(device)s). Όλα τα υπάρχοντα δεδομένα θα χαθούν. Συνέχεια;"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Αδυναμία απομάκρυνσης αρχείου από προηγούμενο LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Πρόκειται να αναβαθμίσετε το Tails στο %(parent_size)s %(vendor)s %(model)s δίσκο (%(device)s). Αν έχετε μόνιμο χώρο, θα διατηρηθεί. Συνέχεια;"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Η λήψη ολοκληρώθηκε!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Η λήψη απέτυχε:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Μπορείτε να δοκιμάσετε να συνεχίσετε τη λήψη"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Αδυναμία επαναφοράς του MBR. Ίσως δεν έχετε εγκατεστημένο το πακέτο `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Το συγκεκριμένο αρχείο δεν μπορεί να αναγνωσθεί. Παρακαλώ διορθώστε τα δικαιώματά του ή διαλέξτε άλλο αρχείο."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Αδυναμία χρήσης του επιλεγμένου αρχείου. Μπορεί να έχετε καλύτερη τύχη αν μετακινήσετε το ISO στη ριζα του δίσκου σας (πχ C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Αδυναμία εγγραφής στο %(device)s, παράκαμψη."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Άγνωστο ISO, παράκαμψη επαλήθευσης αθροίσματος ελέγχου."
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Άγνωστη εξαίρεση dbus κατά την προσπάθεια προσάρτησης της συσκευής: %(message)s"
+msgid "%(filename)s selected"
+msgstr "επιλέχθηκαν %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Άγνωστο σύστημα αρχείων. Η συσκευή μπορεί να χρειάζεται διαμόρφωση."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Άγνωστη έκδοση: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Αποπροσάρτηση '%(udi)s' σε '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Αποπροσάρτηση προσαρτημένων συστημάτων αρχείων σε '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Μη υποστηριζόμενη συσκευή '%(device)s', παρακαλούμε να αναφέρετε το σφάλμα."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Μη υποστηριζόμενο σύστημα αρχείων: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Μη υποστηριζόμενο σύστημα αρχείων: %s\nΠαρακαλώ δημιουργείστε ένα αντίγραφο ασφαλείας και μορφοποιήστε τη συσκευή USB σε σύστημα αρχείων FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Ενημέρωση ιδιοτήτων της κατάτμησης συστήματος %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Αναβάθμιση\nμέσω κλωνοποίησης"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Εγκατάσταση του Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Αναβάθμιση\nμέσω ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Χρησιμοποίηση υπάρχοντος Live συστήματος ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Επαλήθευση του αθροίσματος ελέγχου MD5 του ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Επαλήθευση του αθροίσματος ελέγχου SHA1 της εικόνας του LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Επαλήθευση του αθροίσματος ελέγχου SHA256 της εικόνας του LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Έλεγχος συστήματος αρχείων..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Προειδοποίηση: Η δημιουργία μόνιμου χώρου θα διαγράψει τον ήδη υπάρχοντα."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Προειδοποίηση: Αυτό το εργαλείο πρέπει να εκτελεστεί ως Διαχειριστής. Για να το κάνετε αυτό, κάντε δεξί κλικ πάνω στο εικονίδιο και ανοίξτε τις Ιδιότητες. Στην καρτέλα Συμβατότητας, ενεργοποιήστε το κουτάκι \"Εκτέλεσε αυτό το πρόγραμμα ως διαχειριστής\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Έγινε εγγραφή στην συσκευή με ταχύτητα %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Πρόκειται να εγκαταστήσετε το Tails στο %(size)s %(vendor)s %(model)s δίσκο (%(device)s). Όλα τα υπάρχοντα δεδομένα θα χαθούν. Συνέχεια;"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Πρόκειται να αναβαθμίσετε το Tails στο %(parent_size)s %(vendor)s %(model)s δίσκο (%(device)s). Αν έχετε μόνιμο χώρο, θα διατηρηθεί. Συνέχεια;"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Χρησιμοποιείτε μια παλιά έκδοση του syslinux-extlinux που δεν υποστηρίζει το σύστημα αρχείων ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Μπορείτε να δοκιμάσετε να συνεχίσετε τη λήψη"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Πρέπει να τρέξετε αυτή την εφαρμογή ως διαχειριστής (root)"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ή"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/en_GB/en_GB.po b/en_GB/en_GB.po
index 11f4f34..c13edb2 100644
--- a/en_GB/en_GB.po
+++ b/en_GB/en_GB.po
@@ -5,7 +5,7 @@
# Translators:
# Andi Chandler <andi at gowling.com>, 2014-2015
# Bruce Cowan <bcowan at fastmail.co.uk>, 2010
-# Foorack <maxfaxalv at gmail.com>, 2015
+# Foorack, 2015
# Isabell Long <isabell at issyl0.co.uk>, 2015
# eire123 <jonnydennis10 at gmail.com>, 2013
# Richard Shaylor <rshaylor at me.com>, 2014
@@ -14,9 +14,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Andi Chandler <andi at gowling.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: English (United Kingdom) (http://www.transifex.com/otf/torproject/language/en_GB/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -24,591 +24,551 @@ msgstr ""
"Language: en_GB\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "You must run this application as root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extracting live image to the target device..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Wrote to device at %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Setting up OLPC boot file..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verifying SHA1 checksum of LiveCD image..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verifying SHA256 checksum of LiveCD image..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n\n<li>The USB stick that you install on is formatted and all data is lost.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Browse"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "By allocating extra space on your USB stick for a persistent overlay, you will be able to store data and make permanent modifications to your live operating system. Without it, you will not be able to save data that will persist after a reboot."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculating the SHA1 of %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Cannot find"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Unknown ISO, skipping checksum verification"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Cannot find device %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creating %sMB persistent overlay"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Device is not yet mounted, so we cannot determine the amount of free space."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Download %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download complete!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download failed: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Remove existing Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Downloading %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drive is a loopback, skipping MBR reset"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Unable to chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Entering unmount_device for '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error probing device"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extracting live image to the target device..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Unable to remove file from previous LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatting %(device)s as FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum passed"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Unable to remove directory from previous LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Cannot find device %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "If you do not select an existing Live ISO, the selected release will be downloaded for you."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Unable to write on %(device)s, skipping."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Install\nby cloning"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Install Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Unknown filesystem. Your device may need to be reformatted."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Unsupported filesystem: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation complete! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Unable to mount device: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installing bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "No mount points found"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "It is impossible to upgrade the device %(pretty_name)s because it was not created using Tails Installer. You should instead use %(action)s to upgrade Tails on this device."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB creation failed!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Entering unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Make sure to extract the entire liveusb-creator zip file before running this program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Unmounting mounted filesystems on '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Unmounting '%(udi)s' on '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount %s exists after unmounting"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "No free space on device %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partitioning device %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "No mount points found"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Updating properties of system partition %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Unsupported device '%(device)s', please report a bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Trying to continue anyway."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verifying filesystem..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitioning device %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Unable to change volume label: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistent Storage"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installing bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Please confirm your device selection"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Removing %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Refreshing releases..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s already bootable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Releases updated!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Unable to find partition"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Removing %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatting %(device)s as FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Remove existing Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetting Master Boot Record of %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Select Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drive is a loopback, skipping MBR reset"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Source type does not support verification of ISO MD5 checksum, skipping"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculating the SHA1 of %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizing data on disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Target Device"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error probing device"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "The device \"%(pretty_name)s\" is too small to install Tails (at least %(size)s GB is required)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Unable to find any supported device"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "The selected file is unreadable. Please fix its permissions or select another file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "This button allows you to browse for an existing Live system ISO that you have previously downloaded. If you do not select one, a release will be downloaded for you automatically."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "This button will begin the LiveUSB creation process. This entails optionally downloading a release (if an existing one wasn't selected), extracting the ISO to the USB device, creating the persistent overlay, and installing the bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Cannot find"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "This is the USB stick that you want to install your Live system on. This device must be formatted with the FAT filesystem."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Unknown release: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Downloading %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "This is the progress bar that will indicate how far along in the LiveUSB creation process you are"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation complete! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Trying to continue anyway."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB drive found"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Unable to change volume label: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Unable to chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Unable to find any USB drive"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "The device \"%(pretty_name)s\" is too small to install Tails (at least %(size)s GB is required)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Unable to find any supported device"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Unable to find partition"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Install from ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "It is impossible to upgrade the device %(pretty_name)s because it was not created using Tails Installer. You should instead use %(action)s to upgrade Tails on this device."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Refreshing releases..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Releases updated!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation complete!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Unable to mount device"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Please confirm your device selection"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "You are going to install Tails on the %(size)s %(vendor)s %(model)s device (%(device)s). All data on the selected device will be lost. Continue?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s device (%(device)s). Any persistent volume on this device will remain unchanged. Continue?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download complete!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download failed: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "You can try again to resume your download"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "The selected file is unreadable. Please fix its permissions or select another file."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Unable to use the selected file. You may have better luck if you move your ISO to the root of your drive (ie: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Unable to write on %(device)s, skipping."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Unknown ISO, skipping checksum verification"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s selected"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Unknown release: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Unmounting mounted filesystems on '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Unsupported device '%(device)s', please report a bug."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Unsupported filesystem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Updating properties of system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Upgrade\nby cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Install Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Upgrade\nfrom ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "You are going to install Tails on the %(size)s %(vendor)s %(model)s device (%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s device (%(device)s). Any persistent volume on this device will remain unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "You are using an old version of syslinux-extlinux that does not support the ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/eo/eo.po b/eo/eo.po
index 27e35d5..0c8a62d 100644
--- a/eo/eo.po
+++ b/eo/eo.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Esperanto (http://www.transifex.com/otf/torproject/language/eo/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: eo\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
-#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instalilo de %(distribution)s"
-
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s elektita"
-
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
-
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:302
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Foliumi"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:341
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Kalkulante SHA1 de %s"
-
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr ""
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr ""
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/creator.py:393
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalu Tails"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:890
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Provante daŭri malgraŭe."
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:588
-#, python-format
-msgid "No free space on device %(device)s"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
+msgid "Calculating the SHA1 of %s"
+msgstr "Kalkulante SHA1 de %s"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr ""
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Provante daŭri malgraŭe."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr ""
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr ""
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s elektita"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalu Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "aŭ"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/es/es.po b/es/es.po
index 1aab70d..9b06c0d 100644
--- a/es/es.po
+++ b/es/es.po
@@ -3,27 +3,27 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# Adolfo Jayme-Barrientos, 2014
+# Adolfo Jayme Barrientos, 2014
# Adrián Sandí <asandi.sagot at gmail.com>, 2013
# dark_yoshi <angelargi at yahoo.es>, 2014
# BL <tresemes3 at gmail.com>, 2014
# Carlos Capote <carloscapote at masticable.org>, 2012
# Dani Lobo <dani at dominiosvm.es>, 2013
# Emma Peel, 2017
-# eulalio barbero espinosa <eulaliob at gmail.com>, 2016
+# eulalio barbero espinosa <eulaliob at gmail.com>, 2016-2017
# F Xavier Castane <electromigracion at gmail.com>, 2015
-# Jose Luis <joseluis.tirado at gmail.com>, 2015
+# Jose Luis Tirado <joseluis.tirado at gmail.com>, 2015
# Manuel Herrera <ma_herrer at yahoo.com.mx>, 2013
-# strel, 2013-2016
+# strel, 2013-2017
# strel, 2012-2013
# SubMaix <submaix at gmail.com>, 2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-02-10 12:50+0000\n"
-"Last-Translator: Emma Peel\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-02 00:08+0000\n"
+"Last-Translator: strel\n"
"Language-Team: Spanish (http://www.transifex.com/otf/torproject/language/es/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +31,551 @@ msgstr ""
"Language: es\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Debes ejecutar esta aplicación como root (superusuario)"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar desde la ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extrayendo la imagen autoarrancable al dispositivo de destino..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instalador de %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Escrito al dispositivo a %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionado(s)"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configurando un fichero de arranque OLPC ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Hubo un problema ejecutando el siguiente comando: '%(command)s'. \nSe ha escrito un registro de errores (log) más detallado en '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificando el identificador criptográfico ('checksum') SHA1 de la imagen del CD autoarrancable (LiveCD)... "
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ya es arrancable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificando el identificador criptográfico ('checksum') SHA256 de la imagen del CD autoarrancable (LiveCD)... "
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">¿Necesitas ayuda? Lee la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentación</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instala Tails en otra memoria USB copiando el sistema Tails que estás usando actualmente.</li>\n\n<li>La memoria USB en la que instalas se formatea y se pierden todos los datos.</li>\n\n<li>El almacenamiento cifrado permanente de la memoria USB de Tails que estás usando en este momento no se copiará.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualiza otra memoria USB de Tails a la misma versión de Tails que está usando en este momento.</li>\n\n<li>Se conserva el almacenamiento cifrado permanente de la memoria USB de Tails que se va a actualizar.</li>\n\n<li>No se ha copiado el almacenamiento cifrado permanente de la memoria USB de Tails que está usando en este momento.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualiza otra memoria USB de Tails a la versión de la imagen ISO.</li>\n\n<li>El almacenamiento cifrado persistente de la memoria USB de Tails que se va a actualizar se conservará.</li>\n\n<li>El almacenamiento cifrado persistente de la memoria USB de Tails que estás usando ahora no se copiará.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+S"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navegar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Con la asignación de espacio extra para un área permanente en tu memoria USB podrás almacenar datos y hacer modificaciones permanentes a tu sistema operativo autoarrancable. Sin ello no podrías guardar datos que permanezcan después de reiniciar."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculando la suma de comprobación SHA1 de %s "
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Error: El identificador criptográfico ('checksum') SHA1 de tu CD autoarrancable (Live CD) no es válido. Puedes ejecutar este programa con el modificador --noverify para evitar este chequeo de verificación."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "No se pudo encontrar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO desconocida, omitiendo la verificación del identificador criptográfico ('checksum')"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "No se pudo encontrar el dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "No hay suficiente espacio libre en el dispositivo.\n%dMB ISO + %dMB partición de datos persistentes ('overlay') > %dMB espacio libre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creando partición de datos persistentes ('overlay') de %s MB"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "El dispositivo no está montado aún, por lo que no se pudo determinar la cantidad de espacio libre."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Descargar %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "¡Descarga completa!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "No se pudo copiar %(infile)s en %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Fallo de la descarga: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Eliminando el sistema operativo autoarrancable (Live OS) existente"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Descargando %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "La unidad es de tipo loopback (virtual, de bucle), omitiendo el restablecimiento del MBR..."
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "No se pudo completar chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Ejecutando unmount_device para '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error probando el dispositivo "
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: No se pudo establecer u obtener el UUID de tu dispositivo. No se pudo continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Error: El identificador criptográfico ('checksum') SHA1 de tu CD autoarrancable (Live CD) no es válido. Puedes ejecutar este programa con el modificador --noverify para evitar este chequeo de verificación."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extrayendo la imagen autoarrancable al dispositivo de destino..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "No se pudo eliminar el fichero del anterior sistema operativo autoarrancable (LiveOS): %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formateando %(device)s como FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "El identificador criptográfico ('checksum') MD5 de la ISO es correcto"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "No se pudo eliminar la carpeta del anterior sistema operativo autoarracable (LiveOS): %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Error en la verificación del identificador criptográfico ('checksum') MD5 de la ISO"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "No se pudo encontrar el dispositivo %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Si no seleccionas una imagen ISO autoarrancable existente, la versión seleccionada se descargará para usted."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "No se pudo escribir en %(device)s, omitiendo... "
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalar\nmediante clonado"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algunas particiones del dispositivo destino %(device)s están montadas. Serán desmontadas antes de iniciar el proceso de instalación."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalar Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistema de ficheros desconocido. Tu dispositivo podría tener que ser formateado."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "¡Instalación completa!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "No se admite el sistema de archivos: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "¡Instalación completa! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Excepción GLib desconocida mientras se intentaba montar el dispositivo %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalación completa. Pulse Aceptar para cerrar este programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "No se pudo montar el dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalando gestor de arranque (bootloader)... "
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "No se encontraron puntos de montaje"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Es imposible actualizar el dispositivo %(pretty_name)s porque no fue creado usando el Instalador de Tails. En su lugar debes usar %(action)s para actualizar Tails en este dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "¡La creación del USB autoarrancable (LiveUSB) falló!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Ejecutando unmount_device para '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Asegúrate de extraer el fichero zip liveusb-creator completamente antes de ejecutar este programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Desmontando los sistemas de ficheros montados sobre '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Asegúrate de que tu memoria USB está conectada, y formateada con el sistema de ficheros FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Desmontando '%(udi)s' en '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "El punto de montaje %s sigue existiendo tras desmontar "
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "No hay espacio libre en el dispositivo %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Particionando el dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "No se encontraron puntos de montaje"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Actualizando las propiedades de la partición de sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "No hay suficiente espacio libre en el dispositivo.\n%dMB ISO + %dMB partición de datos persistentes ('overlay') > %dMB espacio libre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dispositivo '%(device)s' no soportado, por favor reporte el fallo."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partición es FAT16; Restringiendo el tamaño de la partición de datos persistentes ('overlay') a 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Tratando de continuar de cualquier manera."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partición es FAT32; restringiendo el tamaño de la partición de datos persistentes (overlay) a 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificando el sistema de ficheros... "
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Particionando el dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "No se pudo cambiar la etiqueta del volumen: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Almacenamiento persistente"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalando gestor de arranque (bootloader)... "
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Almacenamiento persistente (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "No se pudo encontrar el módulo '%s' COM32"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Por favor confirma tu selección de dispositivo"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Eliminando %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Comprobando nuevas versiones..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ya es arrancable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "¡Nuevas versiones actualizadas!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Incapaz de encontrar la partición"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Eliminando %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formateando %(device)s como FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Eliminando el sistema operativo autoarrancable (Live OS) existente"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "No se pudo encontrar gptmbr.bin de syslinux"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Leyendo extractos MBR desde %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "No se pudo leer el extracto MBR desde %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Restableciendo Master Boot Record de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selecciona una ISO autoarrancable (Live ISO)"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configurando un fichero de arranque OLPC ..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "La unidad es de tipo loopback (virtual, de bucle), omitiendo el restablecimiento del MBR..."
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algunas particiones del dispositivo destino %(device)s están montadas. Serán desmontadas antes de iniciar el proceso de instalación."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "La fuente no soporta la verificación del identificador criptográfico ('checksum') MD5 de la ISO, omitiendo..."
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculando la suma de comprobación SHA1 de %s "
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizando datos en el disco... "
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo de destino"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error probando el dispositivo "
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "El dispositivo \"%(pretty_name)s\" es demasiado pequeño para instalar Tails (se requieren al menos %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "No se pudo localizar dispositivo soportado alguno."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "El fichero seleccionado no se puede leer. Ajusta tus permisos o selecciona otro fichero."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Asegúrate de que tu memoria USB está conectada, y formateada con el sistema de ficheros FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Hubo un problema ejecutando el siguiente comando: '%(command)s'. \nSe ha escrito un registro de errores (log) más detallado en '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de ficheros no soportado: %s\nPor favor, haz una copia de respaldo y formatea tu memoria USB con el sistema de ficheros FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Este botón te permite desplazarte para seleccionar una ISO de sistema autoarrancable existente que hayas descargado previamente. Si no seleccionas una se descargará una versión automáticamente para ti."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "No fue posible obtener Win32_LogicalDisk; la petición win32com no devolvió resultados"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Este botón comenzará el proceso de creación del USB autoarrancable (LiveUSB). Esto conlleva opcionalmente el descargar una versión (si no fue seleccionada una existente), extrayendo la ISO al dispositivo USB, creando el área persistente, e instalando el gestor de arranque."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "No se pudo encontrar"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Esta es la memoria USB sobre la que quieres instalar tu sistema autoarrancable ('Live'). Este dispositivo debe estar formateado con el sistema de ficheros FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Asegúrate de extraer el archivo zip del instalador de Tail completo antes de ejecutar este programa."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Versión desconocida: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descargando %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Esta es la barra de progreso que indicará en qué punto, a lo largo del proceso de creación de USB autoarrancable ('LiveUSB'), se está."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: No se pudo establecer u obtener el UUID de tu dispositivo. No se pudo continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Esta es la consola de estado, donde salen escritos todos los mensajes."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "¡Instalación completa! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Tratando de continuar de cualquier manera."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Falló la instalación de Tails"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Advertencia: Esta herramienta debe ser ejecutada como Administrador. Para hacer esto, haz clic con el botón secundario del ratón sobre el icono, y abre las Propiedades. Bajo la pestaña Compatibilidad marca la casilla \"Ejecutar este programa como un administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Instalador de Tails"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Detectado disco USB"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "No se puede encontrar ningún device apto para instalar Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "No se pudo cambiar la etiqueta del volumen: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Por favor, inserte una memoria flash USB o tarjeta SD de al menos %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "No se pudo completar chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "No se pudo copiar %(infile)s en %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "No fue posible encontrar ninguna unidad USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "El dispositivo \"%(pretty_name)s\" es demasiado pequeño para instalar Tails (se requieren al menos %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "No se pudo localizar dispositivo soportado alguno."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "Instalación por clonado"
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Incapaz de encontrar la partición"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar desde la ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "No fue posible obtener Win32_LogicalDisk; la petición win32com no devolvió resultados"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Es imposible actualizar el dispositivo %(pretty_name)s porque no fue creado usando el Instalador de Tails. En su lugar debes usar %(action)s para actualizar Tails en este dispositivo."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Ha ocurrido un error mientras se instalaba Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Comprobando nuevas versiones..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "¡Nuevas versiones actualizadas!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "¡Instalación completa!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Se ha completado la instalación"
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "No se pudo montar el dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "No se pudo montar el dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Por favor confirma tu selección de dispositivo"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "No se pudo eliminar la carpeta del anterior sistema operativo autoarracable (LiveOS): %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Vas a instalar Tails en el dispositivo %(vendor)s %(model)s %(size)s (%(device)s). Todos los datos en el dispositivo seleccionado se perderán ¿Continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "No se pudo eliminar el fichero del anterior sistema operativo autoarrancable (LiveOS): %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Vas a actualizar Tails en el dispositivo %(vendor)s %(model)s %(parent_size)s (%(device)s). Cualquier volumen persistente en este dispositivo permanecerá inalterado. ¿Continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "¡Descarga completa!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Fallo de la descarga: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Puedes intentar continuar con la descarga."
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "No se pudo restablecer el MBR. Podría no tener instalado el paquete `syslinux`"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "El fichero seleccionado no se puede leer. Ajusta tus permisos o selecciona otro fichero."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "No se pudo utilizar el fichero seleccionado. Puede que tenga más suerte si mueve su ISO a la carpeta raíz de su unidad (ej. C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "No se pudo escribir en %(device)s, omitiendo... "
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO desconocida, omitiendo la verificación del identificador criptográfico ('checksum')"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Excepción dbus desconocida al intentar montar el dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionado(s)"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistema de ficheros desconocido. Tu dispositivo podría tener que ser formateado."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Imposible encontrar LiveOS en la ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versión desconocida: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "No se pudo estimar el dispositivo de bloque subyacente: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Desmontando '%(udi)s' en '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Ha habido un problema ejecutando `%s`.\n %s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Desmontando los sistemas de ficheros montados sobre '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' no existe"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dispositivo '%(device)s' no soportado, por favor reporte el fallo."
+msgid "'%s' is not a directory"
+msgstr "'%s no es un directorio"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "No se admite el sistema de archivos: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Omitiendo '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de ficheros no soportado: %s\nPor favor, haz una copia de respaldo y formatea tu memoria USB con el sistema de ficheros FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Hubo un problema ejecutando `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Actualizando las propiedades de la partición de sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "No se pudo abrir el dispositivo para la escritura"
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Actualizar\nmediante clonado"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Use salir del sistema ISO Live"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Seleccione una distribución para bajar:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Dispositivo objetivo:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalar Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Actualizar\ndesde la ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Para ejecutar el instalador de Tails necesitas una imagen ISO que te puedes bajar del sitio web de Tails: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usar una ISO de sistema autoarrancable ('Live') existente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Instalar"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificando el identificador criptográfico ('checksum') MD5 de la ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "Instalar Tails en un nuevo dispositivo USB"
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificando el identificador criptográfico ('checksum') SHA1 de la imagen del CD autoarrancable (LiveCD)... "
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "El USB donde vas a instalar se ha formateado y se han perdido todos los datos"
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificando el identificador criptográfico ('checksum') SHA256 de la imagen del CD autoarrancable (LiveCD)... "
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Actualización"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificando el sistema de ficheros... "
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "Actualización del USB de Tails a la versión de una imagen ISO."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Advertencia: La creación de una nueva partición de datos persistentes borrará la partiición que tienes ahora."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Se preserva el almacenamiento cifrado persistente de la memoria USB de Tails que actualice,"
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Advertencia: Esta herramienta debe ser ejecutada como Administrador. Para hacer esto, haz clic con el botón secundario del ratón sobre el icono, y abre las Propiedades. Bajo la pestaña Compatibilidad marca la casilla \"Ejecutar este programa como un administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "¿Necesita ayuda? Lea la <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentación</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Escrito al dispositivo a %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Instalar mediante clonación"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Vas a instalar Tails en el dispositivo %(vendor)s %(model)s %(size)s (%(device)s). Todos los datos en el dispositivo seleccionado se perderán ¿Continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Instale Tails en otra memoria USB copiando el sistema Tails que está usando actualmente."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Vas a actualizar Tails en el dispositivo %(vendor)s %(model)s %(parent_size)s (%(device)s). Cualquier volumen persistente en este dispositivo permanecerá inalterado. ¿Continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• El almacenamiento cifrado persistente de la memoria USB de Tails que está usando actualmente no se copia."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Actualizar mediante clonado"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Estás usando una versión antigua de syslinux-extlinux que no soporta el sistema de ficheros ext4."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Actualiza otra memoria USB de Tails a la misma versión de Tails que está usando actualmente."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Puedes intentar continuar con la descarga."
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Actualizar desde la ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Debes ejecutar esta aplicación como root (superusuario)"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Actualiza otra memoria USB de Tails a la versión de la imagen ISO."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "¿Necesita ayuda? Lea la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentación</a>"
diff --git a/es_AR/es_AR.po b/es_AR/es_AR.po
index 8da6920..46109a8 100644
--- a/es_AR/es_AR.po
+++ b/es_AR/es_AR.po
@@ -17,9 +17,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-05-13 00:49+0000\n"
-"Last-Translator: Joaquín Serna\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Spanish (Argentina) (http://www.transifex.com/otf/torproject/language/es_AR/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -27,591 +27,551 @@ msgstr ""
"Language: es_AR\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar & Instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Debe ejecutar esta aplicación como superusuario"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar desde una imagen ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extrayendo imagen \"live\" en el dispositivo de destino..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instalador de %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Copiando archivos a %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Estableciendo los archivos de arranque OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Ocurrió un problema ejecutando la siguiente instrucción: `%(command)s`.\nSe ha escrito un registro de los errores en '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificando SHA1 checksum de la imagen del LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s es arrancable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificando SHA256 checksum de la imagen del LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">¿Necesita ayuda? Lea la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentación</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalar Tails en otro dispositivo USB copiando el sistema completo Tails que está usando ahora.</li>\n\n<li>El dispositivo USB en el que instalará Tails será formateado y toda la información en él se perderá.</li>\n\n<li>El almacenamiento cifrado persistente del dispositivo USB actual no será copiado.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizar el Tails de un dispositivo USB a la version que se esta usando actualmente.</li>\n\n<li>El almacenamiento persistente cifrado del dispositivo USB con Tail a actualizar sera preservado.</li>\n\n<li>El almacenamiento cifrado persistente del dispositivo USB actual no será copiado.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizar el Tails de un dispositivo USB a la version de una imagen ISO</li>\n\n<li>El almacenamiento persistente cifrado del dispositivo USB con Tail a actualizar sera preservado.</li>\n\n<li>El almacenamiento cifrado persistente del dispositivo USB actual no será copiado.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navegar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Asignando espacio extra para un área persistente en su memoria USB, será capaz de almacenar datos y hacer modificaciones persistentes a su sistema operativo autoarrancable. Si no lo hace, los cambios se perderán después de un reinicio."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculando el SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Error: El SHA1 de su Live CD es invalido. Puede ejecutar este programa con --noverify como argumento para omitir esta verificación."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "No se encontró"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO desconosida, omitiendo verificación de checksum..."
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "No se encontró el dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "No hay suficiente espacio libre en el dispositivo\n%dMB ISO + %dMB partición de datos > %dMB espacio libre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creando partición de datos de %sMB"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "El dispositivo no esta montado, no se puede determinar la cantidad de espacio libre."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Descargar %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "¡Descarga completa!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "No se pudo copiar %(infile)s a %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Descarga fallida:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Eliminando Live OS existente"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Descargando %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "La unidad es virtual, omitiendo el restablecimiento del MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "No se pudo cambiar los permisos de acceso a %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Ejecutando unmount_device para '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error al examinar el dispositivo"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: No se pudo establecer u obtener el UUID de su dispositivo. No se puede continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Error: El SHA1 de su Live CD es invalido. Puede ejecutar este programa con --noverify como argumento para omitir esta verificación."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extrayendo imagen \"live\" en el dispositivo de destino..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "No se pudiero borrar archivos del anterior LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formateando %(device)s como FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr " MD5 checksum correcta"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "No se pudieron remover directorios del LiveOS anterior: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "La verificación de MD5 checksum falló"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "No se encontró el dispositivo %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Si no selecciona una ISO \"viva\" existente, se descargará la versión seleccionada."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "No se puede escribir en la unidad %(device)s, omitiendo."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalar\npor clonado"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algunas particiones del dispositivo de destino %(device)s están montadas y serán desmontadas antes de comenzar con la instalación."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalar Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistema de archivos desconocido. Su dispositivo puede necesitar ser reformateado."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "¡Instalación completa!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Sistema de archivos no soportado: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalación completa! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "La instalación se ha completado. Presione Aceptar para cerrar este programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "No se pudo montar el dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalando el gestor de arranque..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "No se encontraron puntos de montaje"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Es imposible actualizar el dispositivo %(pretty_name)s por que no fue creado usando un Instalador de Tails. Deberias usar %(action)s para actualizar Tails en este dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "¡Falló la creación del LiveUSB!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Ejecutando unmount_device para '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Asegúrese de extraer el archivo zip de liveusb-creator antes de ejecutar este programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Desmontando sistema de archivos de '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Asegúrese de que su dispositivo USB está conectado y formateado con un sistema de archivos FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Desmontando '%(udi)s' en '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "El punto de montaje %s sigue existiendo después del desmontado"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "No hay espacio libre en el dispositivo %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Particionando dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "No se encontraron puntos de montaje"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Actualizando las propiedades de la partición %(system_partition)s del sistema"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "No hay suficiente espacio libre en el dispositivo\n%dMB ISO + %dMB partición de datos > %dMB espacio libre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "El dispositivo '%(device)s' no está soportado, por favor envíe un informe de fallos"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partición es FAT16; Restringiendo el tamaño de los datos a 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Intentando continuar de todos modos."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partición es FAT32; Restringiendo el tamaño de los datos a 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificando el sistema de archivos..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Particionando dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "No se pudo cambiar la etiqueta del volumen: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Almacenamiento persistente"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalando el gestor de arranque..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Datos almacenados (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Por favor confirmá tu dispositivo elegido"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Removiendo %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Comprobando nuevas versiones..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s es arrancable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "¡Versiones actualizadas!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "No se encontró la partición"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Removiendo %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formateando %(device)s como FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Eliminando Live OS existente"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Restableciendo Registro de Arranque Maestro de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Seleccione Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Estableciendo los archivos de arranque OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "La unidad es virtual, omitiendo el restablecimiento del MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algunas particiones del dispositivo de destino %(device)s están montadas y serán desmontadas antes de comenzar con la instalación."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "La fuente no soporta la verificación MD5 checksum, omitiendo..."
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculando el SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizando datos en disco..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo de Destino"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error al examinar el dispositivo"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "El dispositivo \"%(pretty_name)s\" tiene poca capacidad para instalar Tails( se necesita al menos %(size)s GB )."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "No se encontraron dispositivos soportados"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "No se pudo leer el archivo seleccionado. Por favor cambie los permisos o seleccione otro archivo."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Asegúrese de que su dispositivo USB está conectado y formateado con un sistema de archivos FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Ocurrió un problema ejecutando la siguiente instrucción: `%(command)s`.\nSe ha escrito un registro de los errores en '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de archivos no soportado: %s\nHaga un respaldo de los datos y formatee su dispositivo USB con un sistema de archivos FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Este botón le permite desplazarse para seleccionar una ISO existente de un sistema autoarrancable que haya descargado previamente. Si no selecciona una, se descargará automáticamente una versión."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "No se pudo obtener Win32_LogicalDisk; la consulta a win32com no retornó ningún resultado"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Este botón iniciará los procesos de creación del LiveUSB. Esto conlleva descargar la versión (si no hay una seleccionada), crear una partición, extraer la ISO en el dispositivo USB, e instalar el gestor de arranque."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "No se encontró"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Esta es la memoria USB en la que quiere instalar su sistema autoarrancable. Este dispositivo debe ser formateado con un sistema de archivos FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Versión desconocida: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descargando %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Esta es la barra de progreso que indicará en qué punto se encuentra del proceso de creación de LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: No se pudo establecer u obtener el UUID de su dispositivo. No se puede continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Esta es la consola de estado, donde se muestran todos los mensajes."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalación completa! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Intentando continuar de todos modos."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Unidad USB encontrada"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Advertencia: Esta herramienta necesita ser ejecutada como Administrador. Para hacer esto, haga clic derecho sobre el icono, y abra las Propiedades. En la pestaña Compatibilidad, marque el recuadro \"Ejecutar este programa como un administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "No se pudo cambiar la etiqueta del volumen: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "No se pudo cambiar los permisos de acceso a %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "No se pudo copiar %(infile)s a %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "No se encontró ningun dispositivo USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "El dispositivo \"%(pretty_name)s\" tiene poca capacidad para instalar Tails( se necesita al menos %(size)s GB )."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "No se encontraron dispositivos soportados"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "No se encontró la partición"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar desde una imagen ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "No se pudo obtener Win32_LogicalDisk; la consulta a win32com no retornó ningún resultado"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Es imposible actualizar el dispositivo %(pretty_name)s por que no fue creado usando un Instalador de Tails. Deberias usar %(action)s para actualizar Tails en este dispositivo."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Comprobando nuevas versiones..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "¡Versiones actualizadas!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "¡Instalación completa!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "No se pudo montar el dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "No se pudo montar el dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Por favor confirmá tu dispositivo elegido"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "No se pudieron remover directorios del LiveOS anterior: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Está por instalar Tails en el dispositivo %(device)s (modelo %(vendor)s %(model)s de %(size)s). Todos los datos de este se perderán. ¿Desea continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "No se pudiero borrar archivos del anterior LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Está por actualizar Tails en el dispositivo %(device)s (modelo %(vendor)s %(model)s de %(parent_size)s). Todos los volúmenes persistentes de este serán conservados. ¿Desea continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "¡Descarga completa!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Descarga fallida:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Puedes intentar de nuevo para reanudar tu descarga"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "No se pudo establecer el MBR. Tal vez no tenga el paquete`syslinux` instalado."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "No se pudo leer el archivo seleccionado. Por favor cambie los permisos o seleccione otro archivo."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Imposible usar el archivo seleccionado. Quizás tenga mejor suerte si mueve su ISO a la carpeta de raíz de la unidad (ej: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "No se puede escribir en la unidad %(device)s, omitiendo."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO desconosida, omitiendo verificación de checksum..."
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Excepción de dbus desconocida al intentar montar el dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionado"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistema de archivos desconocido. Su dispositivo puede necesitar ser reformateado."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versión desconocida: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Desmontando '%(udi)s' en '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Desmontando sistema de archivos de '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "El dispositivo '%(device)s' no está soportado, por favor envíe un informe de fallos"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistema de archivos no soportado: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de archivos no soportado: %s\nHaga un respaldo de los datos y formatee su dispositivo USB con un sistema de archivos FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Actualizando las propiedades de la partición %(system_partition)s del sistema"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Actualizar\npor clonado"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalar Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Actualizar \ndesde una ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usar ISO existente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificando MD5 checksum..."
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificando SHA1 checksum de la imagen del LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificando SHA256 checksum de la imagen del LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificando el sistema de archivos..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Advertencia: Crear una nueva partición borrará la existente."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Advertencia: Esta herramienta necesita ser ejecutada como Administrador. Para hacer esto, haga clic derecho sobre el icono, y abra las Propiedades. En la pestaña Compatibilidad, marque el recuadro \"Ejecutar este programa como un administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Copiando archivos a %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Está por instalar Tails en el dispositivo %(device)s (modelo %(vendor)s %(model)s de %(size)s). Todos los datos de este se perderán. ¿Desea continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Está por actualizar Tails en el dispositivo %(device)s (modelo %(vendor)s %(model)s de %(parent_size)s). Todos los volúmenes persistentes de este serán conservados. ¿Desea continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Estás usando una versión vieja de syslinux-extlinux que no soporta el sistema de archivos ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Puedes intentar de nuevo para reanudar tu descarga"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Debe ejecutar esta aplicación como superusuario"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/es_CL/es_CL.po b/es_CL/es_CL.po
index 1c55378..11d0171 100644
--- a/es_CL/es_CL.po
+++ b/es_CL/es_CL.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Spanish (Chile) (http://www.transifex.com/otf/torproject/language/es_CL/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: es_CL\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/es_CO/es_CO.po b/es_CO/es_CO.po
index 09cad7a..79d5ea4 100644
--- a/es_CO/es_CO.po
+++ b/es_CO/es_CO.po
@@ -4,15 +4,15 @@
#
# Translators:
# Cyberpunk Linuxero <aur_linuxero at outlook.com>, 2016
-# william beltran <wbeltranc at gmail.com>, 2016
-# william beltran <wbeltranc at gmail.com>, 2015
+# William Beltrán <wbeltranc at gmail.com>, 2016
+# William Beltrán <wbeltranc at gmail.com>, 2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-04 01:21+0000\n"
-"Last-Translator: Cyberpunk Linuxero <aur_linuxero at outlook.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Spanish (Colombia) (http://www.transifex.com/otf/torproject/language/es_CO/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: es_CO\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e Instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar desde ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Instalador"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navegar"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr ""
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar desde ISO\""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionado"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/es_MX/es_MX.po b/es_MX/es_MX.po
index c11277c..13f3ed9 100644
--- a/es_MX/es_MX.po
+++ b/es_MX/es_MX.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-01-18 00:33+0000\n"
-"Last-Translator: Sanxcher Motala <motala.sanxcher at yandex.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Spanish (Mexico) (http://www.transifex.com/otf/torproject/language/es_MX/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: es_MX\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e Instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar del ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extrayendo imagen en vivo del dispositivo seleccionado... "
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s instalador"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s%(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ya es reiniciable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n\np, li { white-space: pre-wrap; }\n\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Necesitas ayuda? lee el <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li> Instala Tails en otro USB copiando el sistema de Tails que ya estas usando..</li>\n\n<li>El USB en el que instales es formateado y toda la información se pierde.</li>\n\n<li>El almacenamiento codificado persistente del USB que estas usando no esta copiado. </li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualiza otro USB de Tails a la misma versión de Tails que estas usando ahora.</li>\n\n<li>El almacenamiento persistente codificado del USB Tails que actualices es preservado.</li>\n\n</li>El almacenamiento persistente del USB Tails que estas usando no es copiado.<li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualiza otro USB de Tails a la versión de una imagen ISO.</li>\n\n<li>El almacenamiento codificado persistente del USB de Tails que actualices sera preservado.</li>\n\n<li> El almacenamiento codificado persistente del USB de Tails que estas usando no esta copiado.<li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Explorar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Si alocas espacio extra en tu USB para recubrimiento persistente, podras almacenar datos y modificar permanentemente tu sistema operativo en vivo. Sin el, no podras guardar datos que persistan despues de un reinicio. "
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculando el SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "No se pudo encontrar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "No se encuentra el dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creando %sMB encubrimiento persistente"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "El dispositivo no esta montado, asi que no podemos determinar el monto de espacio libre. "
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Descargar %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Descarga completa!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "La descarga ha fallado:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Descargando %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Introduciendo unmount_device para '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error al explorar el dispositivo"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: No se pudo categorizar u obtener el UUID de tu dispositivo. No se puede continuar. "
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extrayendo imagen en vivo del dispositivo seleccionado... "
-
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr ""
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "No se encuentra el dispositivo %s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/dialog.py:163
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr ""
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Introduciendo unmount_device para '%(device)s'"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:785
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:410
-#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ya es reiniciable"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Removing %(file)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr ""
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculando el SHA1 de %s"
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error al explorar el dispositivo"
+
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1423
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:354
-#, python-format
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "No se pudo encontrar"
+
+#: ../tails_installer/creator.py:1477
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descargando %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: No se pudo categorizar u obtener el UUID de tu dispositivo. No se puede continuar. "
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr ""
+msgid "%(size)s %(label)s"
+msgstr "%(size)s%(label)s"
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar del ISO\""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Descarga completa!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "La descarga ha fallado:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionado"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/et/et.po b/et/et.po
index e316512..12f6c6c 100644
--- a/et/et.po
+++ b/et/et.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Estonian (http://www.transifex.com/otf/torproject/language/et/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: et\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "või"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/eu/eu.po b/eu/eu.po
index 8af568b..8d12580 100644
--- a/eu/eu.po
+++ b/eu/eu.po
@@ -15,9 +15,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-03-29 06:31+0000\n"
-"Last-Translator: Xabier Martin <Iparra at iparra.eus>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Basque (http://www.transifex.com/otf/torproject/language/eu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -25,591 +25,551 @@ msgstr ""
"Language: eu\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonatu eta Instalatu\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Aplikazio hau root bezala exekutatu behar duzu"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ISO-tik instalatu\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Instalatzailea"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "%(speed)d MB/segunduko abiaduran gailuan idatzia"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s hautatua"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC abio fitxategia konfiguratzen..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Arazo bat egon da hurrengo komandoa exekutatzerakoan: `%(command)s`\n '%(filename)s' xehetasun gehiagorekin akats erregistro bat idatzi da."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "LiveCD irudiaren SHA1 kontrol-batura egiaztatzen..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s dagoeneko abiarazgarria da"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "LiveCD irudiaren SHA256 kontrol-batura egiaztatzen..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Akatsa: Zure Live CDaren SHA1 baliogabea da. Programa hau --noverify argumentuarekin exekuta dezakezu egiaztatze hau saltatzeko."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO ezezaguna, kontrol-baturaren egiaztapena saltatzen"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr " %sMB gainjarri iraunkorra sortzen"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Arakatu"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Ezin da %(infile)s (e)tik %(outfile)s (e)ra kopiatu: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr ""
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Dagoen Live OS kentzen"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s ren SHA1 kalkulatzen"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Ezin da %(file)s chmodtu: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ezin da aurkitu"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Ezin da aurreko LiveOSaren fitxategia kendu: %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Ezin da aurreko LiveOSaren direktorioa kendu: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Ezin da %s gailua aurkitu"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr " %sMB gainjarri iraunkorra sortzen"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Ezin da %(device)s gailuan idatzi, saltatzen"
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Gailua muntatu gabe dago oraindik, beraz ezin dugu zehaztu leku librearen tamaina."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Deskargatu %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Fitxategi sistema ezezaguna. Zure gailua agian berriro formateatzea behar izan dezake."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Deskarga burutu da!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Onartu gabeko fitxategi sistema: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Deskargak huts egin du:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "%s deskargatzen..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Ezin da gailua muntatu: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Gailua atzera-begizta bat da, MBRa berrezartzea saltatzen"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Muntatze punturik ez da aurkitu"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Akatsa gailua frogatzerakoan"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Akatsa: Ezin da etiketa ezarri edo zure gailuaren UUIDa eskuratu. Ezin da jarraitu."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Akatsa: Zure Live CDaren SHA1 baliogabea da. Programa hau --noverify argumentuarekin exekuta dezakezu egiaztatze hau saltatzeko."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "%(device)s desmuntatzen"
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s FAT32 bezala formateatzen"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 kontrol-batura gaindituta"
+msgid "Mount %s exists after unmounting"
+msgstr "%s muntaketa existitzen da desmuntatu ondoren"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 kontrol-batura egiaztapenak huts egin du"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "%(device)s gailuaren partizioa egiten"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr ""
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Sistema partizioaren propietateak eguneratzen %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalatu\nklonazioaren bitartez"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "'%(device)s' gailua ez da onartzen, mesedez, eman errorearen berri."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails instalatu"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Aurrera jarraitzeko saiatutzen edonola."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalazioa burutu da!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Fitxategi sistema egiaztatzen..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalazioa burutu da! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalazio burutu da. Sakatu Ados programa hau ixteko."
+msgid "Unable to change volume label: %(message)s"
+msgstr "Ezin da bolumenaren etiketa aldatu: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Abio-kargatzailea instalatzen..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB sorkuntzak huts egin du!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Egiaztatu liveusb-creator zip fitxategi osoa erauzten duzula programa hau exekutatu baino lehen."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Egiaztatu zure USB gailua konektatuta dagoela eta FAT fitxategi sistemarekin formateatuta."
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "%s muntaketa existitzen da desmuntatu ondoren"
+msgid "Removing %(file)s"
+msgstr "%(file)s kentzen"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "%(device)s gailuan ez dago leku askerik."
+msgid "%s already bootable"
+msgstr "%s dagoeneko abiarazgarria da"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Muntatze punturik ez da aurkitu"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Ezin da partizioa aurkitu"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partizioa FAT16 da; Gainjarri neurria 2Gtara mugatzen"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s FAT32 bezala formateatzen"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partizioa FAT32 da; Gainjarri neurria 4Gtara mugatzen"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "%(device)s gailuaren partizioa egiten"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Biltegiratze iraunkorra"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Biltegiratze iraunkorra (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Mesedez, berretsi zure gailuaren hautapena"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Argitalpenak freskatzen..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Argitalpenak eguneratuta!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s kentzen"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Dagoen Live OS kentzen"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "%s ren abio-erregistro nagusia (MBR) berrezartzen"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Aukeratu Live ISO irudia"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC abio fitxategia konfiguratzen..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Gailua atzera-begizta bat da, MBRa berrezartzea saltatzen"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Iturburu motak ez du ISO MD5 kontrol-baturaren egiaztapena onartzen, saltatzen"
+msgid "Calculating the SHA1 of %s"
+msgstr "%s ren SHA1 kalkulatzen"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Datuak diskoan sinkronizatzen..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Helburu gailua"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Akatsa gailua frogatzerakoan"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Ezin da onartutako gailurik aurkitu"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Aukeratutako fitxategia irakurtezina da. Mesedez zuzendu bere baimenak edo beste fitxategi bat aukeratu. "
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Egiaztatu zure USB gailua konektatuta dagoela eta FAT fitxategi sistemarekin formateatuta."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Arazo bat egon da hurrengo komandoa exekutatzerakoan: `%(command)s`\n '%(filename)s' xehetasun gehiagorekin akats erregistro bat idatzi da."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Onartu gabeko fitxategi sistema: %s\nMesedez babeskopia bat egin eta formateatu ezazu zure USB gailua FAT fitxategi sistemarekin."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Ezin da Win32_LogicalDisk lortu; win32com eskaerak ez du erantzunik itzuli"
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ezin da aurkitu"
+
+#: ../tails_installer/creator.py:1477
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Argitalpen ezezaguna: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s deskargatzen..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Akatsa: Ezin da etiketa ezarri edo zure gailuaren UUIDa eskuratu. Ezin da jarraitu."
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalazioa burutu da! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Abisua: Tresna hau Administratzaile bezala exekutatu behar da. Hau egiteko, sakatu eskuinarekin ikonoan eta ireki Propietateak. Bateragarritasuna fitxan, markatu \"Programa hau administratzale bezala exekutatu\" kutxa."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Hau egoera kontsola da, non mezu guztiak idazten diren."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Aurrera jarraitzeko saiatutzen edonola."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB memoria aurkitu da"
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Ezin da bolumenaren etiketa aldatu: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Ezin da %(file)s chmodtu: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
+
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ISO-tik instalatu\""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Ezin da %(infile)s (e)tik %(outfile)s (e)ra kopiatu: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Ezin da USB gailurik aurkitu."
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Ezin da onartutako gailurik aurkitu"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Argitalpenak freskatzen..."
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Ezin da partizioa aurkitu"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Argitalpenak eguneratuta!"
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Ezin da Win32_LogicalDisk lortu; win32com eskaerak ez du erantzunik itzuli"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalazioa burutu da!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Ezin da gailua muntatu"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Ezin da gailua muntatu: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Mesedez, berretsi zure gailuaren hautapena"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Ezin da aurreko LiveOSaren direktorioa kendu: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Tails instalatuko duzu %(size)s %(vendor)s %(model)s gailu honetan (%(device)s). Gailuaren datu guztiak galduko dira. Jarraitu?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Ezin da aurreko LiveOSaren fitxategia kendu: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Tails berritzera zoaz %(parent_size)s %(vendor)s %(model)s gailuan (%(device)s). Gailu honetako edozein bolumen iraunkorrak ez du aldaketarik jasango. Jarraitu?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Deskarga burutu da!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Deskargak huts egin du:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Deskarga jarraitzen saia zaitezke berriz"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Ezin da MBRa berrezarri. Baliteke `syslinux` paketea instalatuta ez izatea."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Aukeratutako fitxategia irakurtezina da. Mesedez zuzendu bere baimenak edo beste fitxategi bat aukeratu. "
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Hautatutako fitxategia ezin da erabili. Sorte gehiago izan dezakezu zure ISOa zure gailuaren oinarrira mugitzen baduzu (adib: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Ezin da %(device)s gailuan idatzi, saltatzen"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO ezezaguna, kontrol-baturaren egiaztapena saltatzen"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "dbus salbuespen ezezaguna gailua muntatzerakoan: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s hautatua"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Fitxategi sistema ezezaguna. Zure gailua agian berriro formateatzea behar izan dezake."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Argitalpen ezezaguna: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "%(device)s desmuntatzen"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "'%(device)s' gailua ez da onartzen, mesedez, eman errorearen berri."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Onartu gabeko fitxategi sistema: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Onartu gabeko fitxategi sistema: %s\nMesedez babeskopia bat egin eta formateatu ezazu zure USB gailua FAT fitxategi sistemarekin."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Sistema partizioaren propietateak eguneratzen %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Eguneratu\nklonazioaren bitartez"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails instalatu"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Eguneratu\nISO-ren bitartez"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Erabili existitzen den Live sistema ISOa"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 kontrol-batura egiaztatzen"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "LiveCD irudiaren SHA1 kontrol-batura egiaztatzen..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "LiveCD irudiaren SHA256 kontrol-batura egiaztatzen..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Fitxategi sistema egiaztatzen..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Abisua: Gainjarri iraunkor berri bat sortzeak existitzen dena ezabatuko du."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Abisua: Tresna hau Administratzaile bezala exekutatu behar da. Hau egiteko, sakatu eskuinarekin ikonoan eta ireki Propietateak. Bateragarritasuna fitxan, markatu \"Programa hau administratzale bezala exekutatu\" kutxa."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "%(speed)d MB/segunduko abiaduran gailuan idatzia"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Tails instalatuko duzu %(size)s %(vendor)s %(model)s gailu honetan (%(device)s). Gailuaren datu guztiak galduko dira. Jarraitu?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Tails berritzera zoaz %(parent_size)s %(vendor)s %(model)s gailuan (%(device)s). Gailu honetako edozein bolumen iraunkorrak ez du aldaketarik jasango. Jarraitu?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "ext4 fitxategi sistema onartzen ez duen syslinux-extlinux bertsio zahar bat erabiltzen ari zara"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Deskarga jarraitzen saia zaitezke berriz"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Aplikazio hau root bezala exekutatu behar duzu"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "edo"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/fa/fa.po b/fa/fa.po
index 019dc87..ad81f88 100644
--- a/fa/fa.po
+++ b/fa/fa.po
@@ -21,9 +21,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-05-19 07:01+0000\n"
-"Last-Translator: Amir Moezzi <amirreza.mz at yahoo.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Persian (http://www.transifex.com/otf/torproject/language/fa/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +31,551 @@ msgstr ""
"Language: fa\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"تکثیر و نصب\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "شما بايد اين برنامه را با دسترسي روت اجرا كنيد"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"نصب از ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "در حال باز کردن فایل نصب به روی دستگاه مقصد..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "نصب کنندهی %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "نوشته شده بر روی دستگاه جانبی در %(speed)d مگابایت بر ثانیه"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s انتخاب شده"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "تنظیم فایل راهاندازی OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "مشکلی در اجرای دستور زیر وجود دارد: `%(command)s`.\\n یک کارنامه خطا با جزییات بیشتر روی '%(filename)s' نوشته شده است."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "تایید جمع کنترلی SHA1 تصویرِ LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s از پیش قابل راهاندازی"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "تایید جمع کنترلی SHA256 تصویرِ LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">به کمک نیاز دارید؟ خواندن: <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">مستندات</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>تیلز را با کپی کردن همان سیستم تیلزی که شما در حال حاضر از آن استفاده میکنید، روی یک حافظهی USB دیگر نصب کنید..</li>\n\n<li>حافظهی USB که روی آن نصب میکنید، فرمت شده و تمامی اطلاعات آن از بین رفته است.</li>\n\n<li>فضای دائمی رمزگذاری شده از حافظهی USB تیلز که شما در حال حاضر از آن استفاده میکنید، کپی نشده است.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>یک حافظهی USB دیگر تیلز را به همان ورژنی که شما استفاده میکنید ارتقاء دهید.</li>\n\n<li>فضای دائمی رمز گذاری شده از حافظهی USB تیلز که شما ارتقا میدهید، محفوظ است.</li>\n\n<li>فضای دائمی رمز گذاری شده از حافظهی USB تیلز که شما در حال حاضر از آن استفاده میکنید، کپی نشده است.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>یک حافظهی USB دیگر تیلز را به ورژن یک تصویر ISO ارتقاء دهید.</li>\n\n<li>فضای دائمی رمز گذاری شده از حافظهی USB تیلز که شما ارتقا میدهید، محفوظ است.</li>\n\n<li>فضای دائمی رمز گذاری شده از حافظهی USB تیلز که شما در حال حاضر از آن استفاده میکنید، کپی نشده است.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "مرور وب!"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "با تخصیص یک فضای اضافی روی دستگاه یواسبی تان، این امکان را خواهید داشت که تغییراتی را به صورت همیشگی روی سیستمعامل زندهی آن اعمال کنید. در غیر این صورت هر تغییری که روی آن دهید با یکبار راهاندازی مجدد از بین خواهد رفت."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "محاسبه SHA1 از %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "خطا: مقداری SHA1 سیدی لایو نامعتبر است. شما می توانید این برنامه را با آرگومان --noverify اجرا کنید تا از این کنترل کردن عبور کند."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "یافت نمیشود"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO ناشناخته؛ پرش از روی بازبینی کنترل"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "وسیله ی %s یافت نشد"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "فضای خالی کافی وجود ندارد.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "ایجاد %sMB پوشش پایدار"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "وسیله هنوز نصب نشده، نمیتوان اندازهی فضای خالی را تعیین کرد."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "دریافت %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "دانلود کامل شد!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "قادر به کپی کردن %(infile)s به %(outfile)s نیست: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "دانلود نا موفق:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "حذف Live OS موجود"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "در حال دانلود %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "درایو از نوع Loopback است. راهاندازی دوباره \"رکورد راهاندازی اصلی\" MBR را رد کنید."
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "قادر به اجرای دستور سطح دسترسی %(file)s نیست: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "وارد کردن دستگاه هاي وصل نشده براي '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "دستگاه جستجوی خطا"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "خطا: امکان تنظیم کردن نام دستگاه شما نیست و یا خواندن UUID دستگاه شما ممکن نبود. نمی توان ادامه داد."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "خطا: مقداری SHA1 سیدی لایو نامعتبر است. شما می توانید این برنامه را با آرگومان --noverify اجرا کنید تا از این کنترل کردن عبور کند."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "در حال باز کردن فایل نصب به روی دستگاه مقصد..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "قادر به حذف فایل از LiveOS قبلی نیست: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "فرمت کردن %(device)s به صورت FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "موفقیت در کنترل ISO MD5"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "قادر به نصب حافظه نیست: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "عدم موفقیت در بازبینی کنترل ISO MD5"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "وسیله ی %s یافت نشد"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "اگر یک Live ISO موجود را انتخاب نکنید، نسخهی انتخابشده برایتان دانلود خواهد شد"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "خطا در نوشتن بر روی دستگاه %(device)s. این مرحله را جا میاندازم."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "نصب\nتوسط شبیه سازی"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "بعضی از پارتیشن های موجود بر روی دستگاه %(device)s فعال و راه اندازی شدند. آن ها قبل از شروع مراحل نصب غیر فعال می شوند."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "نصب مسیرها"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "نوع فايل سيستم ناشناخته است. دستگاه شما ممكن است نياز به فرمت مجدد داشته باشد."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "عمليات نصب به پايان رسيد!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "فایل سیستم های غیرقابل پشتیبانی: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "عمليات نصب به پايان رسيد! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "عمليات نصب به پايان رسيد. دكمه OK را براي بستن برنامه بزنيد."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "قادر به نصب حافظه نیست: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "نصب بوت لودر..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "هيچ نقطه بازگذاري يافت نشد"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "ارتقاء دستگاه %(pretty_name)s غیر ممکن است، زیرا با استفاده از نصبکننده تیلز ایجاد نشده است. شما باید از %(action)s برای ارتقاء تیلز روی این دستگاه استفاده کنید."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "نصب سیستم عامل بر روی «دستگاه یو اس بی» شما با خطا مواجه شد!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "وارد کردن دستگاه هاي وصل نشده براي '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "پیش از اجرای این برنامه مطمئن شوید که فایل liveusb-creator را از حالت فشرده خارج کردهاید"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "حذف فایل های سیستمی از روی '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "مطمئن شوید یو اس بی شما متصل شده و با فایل سیستم FAT قالب بندی شده است."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "جداکردن '%(udi)s' روی '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "نصب %s بعد از حذف موجود است"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "فضای کافی بر روی حافظه وجود ندارد %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "در حال پاتیشنبندیِ %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "هيچ نقطه بازگذاري يافت نشد"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "در حال به روز رسانی اطلاعات پارتیشن سیستمی %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "فضای خالی کافی وجود ندارد.\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "دستگاه پشتیبانی نشده '%(device)s'، لطفا یک باگ را گزارش دهید"
+
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "تلاش برای ادامه دادن در هر صورت."
+
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "تایید فایل سیستم..."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "قسمتبندی بر اساس فرمت FAT16 است. اندازه جایگذاری به ۲ گیگابایت محدود شود"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr "قادر به تغییر برچسب حافظه نیست: %(message)s"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "پارتیشن به فرمت FAT32 است؛ محدودیت فضا ۴گیگابایت خواهد بود"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "نصب بوت لودر..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "در حال پاتیشنبندیِ %(device)s"
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "ذخيره سازي مداوم"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "برداشتن %(file)s"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "حافظه دائم (0 مگابایت)"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s از پیش قابل راهاندازی"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "لطفا دستگاه انتخابی تان را تایید کنید"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "قادر به پیدا کردن پارتیشن نیست."
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "بازنگری انتشارها…"
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr "فرمت کردن %(device)s به صورت FAT32"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "انتشارها بروزرسانی شدند!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Removing %(file)s"
-msgstr "برداشتن %(file)s"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "حذف Live OS موجود"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "بازنشانی رکورد راهاندازی اصلی از %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "انتخاب ایزوی لایو"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "تنظیم فایل راهاندازی OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "درایو از نوع Loopback است. راهاندازی دوباره \"رکورد راهاندازی اصلی\" MBR را رد کنید."
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "بعضی از پارتیشن های موجود بر روی دستگاه %(device)s فعال و راه اندازی شدند. آن ها قبل از شروع مراحل نصب غیر فعال می شوند."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "نوع منبع، عملیات بازبینی از کنترل ISO MD5 را پشتیبانی نمیکند؛ پرش"
+msgid "Calculating the SHA1 of %s"
+msgstr "محاسبه SHA1 از %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "هماهنگ سازی دادهها بر روی دیسک..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "دستگاه هدف"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "دستگاه جستجوی خطا"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "فضای دستگاه \"%(pretty_name)s\" برای نصب کم است (حداقل %(size)s گیگابایت فضا لازم است)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "هیچ دستگاهی که پشتیبانی شود یافت نشد"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "فایل انتخابشده قابل خواندن نیست. لطفا اجازه دسترسی به آن را اصلاح کنید یا فایل دیگری را انتخاب کنید"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "مطمئن شوید یو اس بی شما متصل شده و با فایل سیستم FAT قالب بندی شده است."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "مشکلی در اجرای دستور زیر وجود دارد: `%(command)s`.\\n یک کارنامه خطا با جزییات بیشتر روی '%(filename)s' نوشته شده است."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "فایل سیستم پشتیبانی نشده: %s\nلطفا از وسیله یواسبی خود پشتیبانی گرفته و آن را با فایل سیستم FAT قالب بندی کنید."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "این دکمه به شما اجازه میدهد تا به دنبال یک Live system ISO موجود که پیشتر دانلود کردهاید بگردید. اگر یکی از گزینهها را انتخاب نکنید، یک نسخه به صورت خودکار برایتان دانلود خواهد شد."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "قادر به دسترسی به Win32_LogicalDisk نیست. فراخواندن win32com هیچ نتیجهای را برگردان نمیکند"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "این دکمه فرآیند ساختن یواسبی زنده را شروع میکند. این شامل دانلود کردن یک انتشار از سیستمعامل «تیلز» (البته فقط در صورتی که هیچ گزینهای موجود نباشد)، باز کردن فایل ایزو و ریختن آن روی دستگاه، ساختن یک لایه همیشگی و نهایتا نصب راهانداز یا بوتلودر آن میباشد."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "یافت نمیشود"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "این حافظه جانبی USB است که شما میخواهید Live system خود را روی آن نصب کنید. این حافظه میبایست تحت سیستم FAT فُرمَت شود."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "نسخه نرم افزار معتبر نیست: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "در حال دانلود %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "این نوار پیشرفت نشان میدهد که شما در کجای فرآیند ساختن سیستمعامل زنده هستید"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "خطا: امکان تنظیم کردن نام دستگاه شما نیست و یا خواندن UUID دستگاه شما ممکن نبود. نمی توان ادامه داد."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "اینجا کنسول وضعیت است. جایی که تمام پیغامها در آن نوشته میشوند."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "عمليات نصب به پايان رسيد! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "تلاش برای ادامه دادن در هر صورت."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "هشدار: اين ابزار نياز به اجرا شدن توسط مدير سيستم دارد. براي انجام اين كار، بر روي آيكون راست كليك كرده، سپس Properties را انتخاب كرده و از لبه Compatibility، گزينه Run the program as an administrator را انتخاب كنيد."
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "درایو USB یافت شد"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "قادر به تغییر برچسب حافظه نیست: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "قادر به اجرای دستور سطح دسترسی %(file)s نیست: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "قادر به کپی کردن %(infile)s به %(outfile)s نیست: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "قادر به یافتن هیچ درایو یو اس بی نیست"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "فضای دستگاه \"%(pretty_name)s\" برای نصب کم است (حداقل %(size)s گیگابایت فضا لازم است)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "هیچ دستگاهی که پشتیبانی شود یافت نشد"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "قادر به پیدا کردن پارتیشن نیست."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"نصب از ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "قادر به دسترسی به Win32_LogicalDisk نیست. فراخواندن win32com هیچ نتیجهای را برگردان نمیکند"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "ارتقاء دستگاه %(pretty_name)s غیر ممکن است، زیرا با استفاده از نصبکننده تیلز ایجاد نشده است. شما باید از %(action)s برای ارتقاء تیلز روی این دستگاه استفاده کنید."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "بازنگری انتشارها…"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "انتشارها بروزرسانی شدند!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "عمليات نصب به پايان رسيد!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "فادر به بارگذاري دستگاه نيست."
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "قادر به نصب حافظه نیست: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "لطفا دستگاه انتخابی تان را تایید کنید"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "قادر به نصب حافظه نیست: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "شما قصد نصب تیلز روی این دستگاه را دارید: %(size)s %(vendor)s %(model)s :(%(device)s). همه ی اطلاعات موجود روی آن پاک خواهد شد. مطمئن هستید؟"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "قادر به حذف فایل از LiveOS قبلی نیست: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "شما تیلز را بر روی دستگاه %(parent_size)s %(vendor)s %(model)s (%(device)s) به روز خواهید کرد. هر درایو ثابتی روی این دستگاه بدون تغییر باقی خواهد ماند. ادامه می دهید؟ "
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "دانلود کامل شد!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "دانلود نا موفق:"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "بار دیگر می توانید برای ادامه دانلود سعی کنید"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "قادر به راهاندازی دوباره \"رکورد راهاندازی اصلی\" MBR نیست. شما احتمالا بسته \"syslinux\" را نصب نکردهاید."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "فایل انتخابشده قابل خواندن نیست. لطفا اجازه دسترسی به آن را اصلاح کنید یا فایل دیگری را انتخاب کنید"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "قادر به استفاده از فايل انتخاب شده نيست. اگر فايل ايزو را به ريشه درايو خود (مثلاً C) منتقل كنيد ممكن است شانس بيتشري داشته باشيد."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "خطا در نوشتن بر روی دستگاه %(device)s. این مرحله را جا میاندازم."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO ناشناخته؛ پرش از روی بازبینی کنترل"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "اسنثناء ناشاخته در dbus هنگام تلاش برای نصب دستگاه: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s انتخاب شده"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "نوع فايل سيستم ناشناخته است. دستگاه شما ممكن است نياز به فرمت مجدد داشته باشد."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "نسخه نرم افزار معتبر نیست: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "جداکردن '%(udi)s' روی '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "حذف فایل های سیستمی از روی '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "دستگاه پشتیبانی نشده '%(device)s'، لطفا یک باگ را گزارش دهید"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "فایل سیستم های غیرقابل پشتیبانی: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "فایل سیستم پشتیبانی نشده: %s\nلطفا از وسیله یواسبی خود پشتیبانی گرفته و آن را با فایل سیستم FAT قالب بندی کنید."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "در حال به روز رسانی اطلاعات پارتیشن سیستمی %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "ارتقا\nتوسط شبیه سازی"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "نصب مسیرها"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "ارتقا\nاز ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "استفاده از یک ایزوی زنده موجود"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "هماهنگ سازی دادهها بر روی دیسک..."
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "تایید جمع کنترلی SHA1 تصویرِ LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "تایید جمع کنترلی SHA256 تصویرِ LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "تایید فایل سیستم..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "اخطار: ساخت پوشش مداوم آنچه را که از قبل وجود داشته است را از حذف می کند."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "هشدار: اين ابزار نياز به اجرا شدن توسط مدير سيستم دارد. براي انجام اين كار، بر روي آيكون راست كليك كرده، سپس Properties را انتخاب كرده و از لبه Compatibility، گزينه Run the program as an administrator را انتخاب كنيد."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "نوشته شده بر روی دستگاه جانبی در %(speed)d مگابایت بر ثانیه"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "شما قصد نصب تیلز روی این دستگاه را دارید: %(size)s %(vendor)s %(model)s :(%(device)s). همه ی اطلاعات موجود روی آن پاک خواهد شد. مطمئن هستید؟"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "شما تیلز را بر روی دستگاه %(parent_size)s %(vendor)s %(model)s (%(device)s) به روز خواهید کرد. هر درایو ثابتی روی این دستگاه بدون تغییر باقی خواهد ماند. ادامه می دهید؟ "
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "شما از یک نسخهی قدیمی syslinux-extlinux استفاده میکنید که از سیستم پروندهی ext4 پشتیبانی نمیکند."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "بار دیگر می توانید برای ادامه دانلود سعی کنید"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "شما بايد اين برنامه را با دسترسي روت اجرا كنيد"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "یا"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/fi/fi.po b/fi/fi.po
index 3a21f2f..d96a712 100644
--- a/fi/fi.po
+++ b/fi/fi.po
@@ -17,9 +17,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-08-29 17:25+0000\n"
-"Last-Translator: Pietu1998 <smiley at pietu1998.net>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Finnish (http://www.transifex.com/otf/torproject/language/fi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -27,591 +27,551 @@ msgstr ""
"Language: fi\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Kloonaa ja asenna\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Ohjelma on suoritettava pääkäyttäjänä"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Asenna käyttäen ISO-levykuvaa\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Puretaan live-levykuvaa kohdelaittelle…"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s -asentaja"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Laitteelle kirjoitettiin nopeudella %(speed)d Mt/s"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valittu"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Luodaan OLPC-käynnistystiedostoa..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Komennon `%(command)s` suorittamisessa oli ongelma.\nTarkempi virheloki on kirjoitettu tiedostoon ’%(filename)s’."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Varmistetaan LiveCD-levykuvan SHA1-tarkistussumma..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s on jo käynnistettävä"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Varmistetaan LiveCD-levykuvan SHA256-tarkistussumma..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Tarvitsetko apua? Lue <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentit</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Asenna Tails toiseen USB-muistitikkuun kopiomalla nyt käyttämäsi Tails-käyttöjärjestelmä..</li>\n\n<li>USB-muistitikku alustetaan ja kaikki tiedot menetetään.</li>\n\n<li>Salattua osiota, joka sijaitsee nyt käyttämälläsi USB-muistitikulla, ei kopioida.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Päivitä toinen Tails-USB-muistitikku nyt käyttämääsi versioon.</li>\n\n<li>Päivitettävällä USB-muistitikulla sijaitseva salattu osio säilytetään.</li>\n\n<li>Salattua osiota, joka sijaitsee nyt käyttämälläsi USB-muistitikulla, ei kopioida.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Päivitä toinen Tails-USB-muistitikku ISO-tiedoston versioon.</li>\n\n<li>Päivitettävällä USB-muistitikulla sijaitseva salattu osio säilytetään.</li>\n\n<li>Salattua osiota, joka sijaitsee nyt käyttämälläsi USB-muistitikulla, ei kopioida.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Selaa"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Jos varaat USB-tikulta vapaata tilaa pysyvää tallennustilaa varten, voit tallettaa tietoa ja muokata pysyvästi live-käyttöjärjestelmääsi. Jos pysyvää tallennustilaa ei ole, tallentamasi tiedot eivät säily uudelleenkäynnistyksen jälkeen."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Lasketaan %s:n SHA1-tarkistussummaa"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Virhe: LiveCD:n SHA1-tarkistussumma on virheellinen. Voit ajaa tämän ohjelman ja käyttää valitsinta --noverify, jolloin varmistus ohitetaan."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ei voida löytää"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Tunnistamaton ISO, ohitetaan tarkistussumman varmistus."
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Laitetta %s ei löydy"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Laitteella ei ole tarpeeksi vapaata tilaa.\n%d Mt:n ISO + %d Mt:n tallennustila > %d Mt:a vapaata tilaa"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Luodaan %s Mt:n pysyvää tallennustilaa"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Laitetta ei ole vielä liitetty, joten emme voi arvioida vapaan tilan määrää."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Lataa %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Lataus on valmis!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Tiedostoa %(infile)s ei voida kopioida kohteeseen %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Lataus epäonnistui:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Poistetaan nykyinen Live-käyttöjärjestelmä"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Ladataan %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Levy on loopback-laite: ohitetaan MBR:n palautus"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Komentoa chmod ei voi käyttää tiedostoon %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Suoritetaan unmount_device laitteelle ’%(device)s’"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Laitteen etsimisessä virhe"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Virhe: Nimiön tai laitteen UUID:n hakeminen epäonnistui. Jatkaminen epäonnistui."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Virhe: LiveCD:n SHA1-tarkistussumma on virheellinen. Voit ajaa tämän ohjelman ja käyttää valitsinta --noverify, jolloin varmistus ohitetaan."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Puretaan live-levykuvaa kohdelaittelle…"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Edellisen Live-käyttöjärjestelmän tiedostoa ei voi poistaa: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Alustetaan %(device)s FAT32:lla."
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO:n MD5-tarkistussumma varmistui"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Edellisen Live-käyttöjärjestelmän hakemistoa ei voi poistaa: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO:n MD5-tarkistussummavarmennus epäonnistui"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Laitetta %s ei löydy"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Jos et valitse olemassaolevaa Live ISOa, valittu julkaisu ladataan puolestasi."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Laitteelle %(device)s ei voi kirjoittaa: vaihe ohitetaan."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Asenna\nkloonaamalla"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Jotkut laitteen %(device)s osiot on liitetty. Osiot irrotetaan ennen kuin asennus alkaa."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Asenna Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Tuntematon tiedostojärjestelmä. Laitteesi on ehkä alustettava uudelleen."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Asennus on valmis!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Tiedostojärjestelmä, jota ei tueta: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Asennus on valmis! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Asennus on valmis. Napsauta OK, jolloin ohjelma sulkeutuu."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Laitteen liittäminen epäonnistui: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Asennetaan alkulatausohjelma..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Liitoskohtia ei löytynyt"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Laitetta %(pretty_name)s ei voida päivittää, koska sitä ei ole luotu käyttäen Tails-asentajaa. Käytä sen sijaan %(action)s Tails:n päivittämiseen tässä laitteessa."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB:n luominen epäonnistui!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Suoritetaan unmount_device laitteelle ’%(device)s’"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Huolehdi, että purat kokonaisuudessaan liveusb-creatorin zip -tiedoston ennen kuin suoritat tämän ohjelman."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Irrotetaan liitetty tiedostojärjestelmä laitteelta ’%(device)s’"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Varmista että USB-tikku on kiinnitetty ja että sen tiedostojärjestelmä on FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Irrotetaan ’%(udi)s’ laitteelta ’%(device)s’"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Irrotettu liitoskohta %s on vielä olemassa"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Laitteella %(device)s ei ole vapaata tilaa"
+msgid "Partitioning device %(device)s"
+msgstr "Osioidaan laitetta %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Liitoskohtia ei löytynyt"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Päivitetään järjestelmäosion %(system_partition)s ominaisuuksia"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Laitteella ei ole tarpeeksi vapaata tilaa.\n%d Mt:n ISO + %d Mt:n tallennustila > %d Mt:a vapaata tilaa"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Laitetta ’%(device)s’ ei tueta, ilmoita virheestä."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Osion levyjärjestelmä on FAT16: koko rajoitetaan 2 Gt:uun"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Yritetään silti jatkaa."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Levyjärjestelmänä on FAT32; rajoitetaan levyn koko 4 Gt:un."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Tarkistetaan tiedostojärjestelmää..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Osioidaan laitetta %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Taltion nimiön muuttaminen epäonnistui: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Pysyvä tallennustila"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Asennetaan alkulatausohjelma..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Pysyvä tallennustila (0 Mt)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Vahvista laitevalintasi"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Poistetaan %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Päivitetään julkaisuja..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s on jo käynnistettävä"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Julkaisut päivitetty!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Osiota ei löydy"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Poistetaan %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Alustetaan %(device)s FAT32:lla."
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Poistetaan nykyinen Live-käyttöjärjestelmä"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Palautetaan %s:n Master-käynnistystietue"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Valitse Live-ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Luodaan OLPC-käynnistystiedostoa..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Levy on loopback-laite: ohitetaan MBR:n palautus"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Jotkut laitteen %(device)s osiot on liitetty. Osiot irrotetaan ennen kuin asennus alkaa."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Lähteen muoto ei tue ISO:n MD5-tarkistussumman varmistamista: vaihe ohitetaan"
+msgid "Calculating the SHA1 of %s"
+msgstr "Lasketaan %s:n SHA1-tarkistussummaa"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synkronoidaan levyn tiedot..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Kohdelaite"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Laitteen etsimisessä virhe"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Laitteen \"%(pretty_name)s\" tallennustila ei riitä Tails:n asentamiseen (asennukseen vaaditaan vähintään %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Tuettua laitetta ei löydy"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Valittu tiedosto ei ole luettavissa. Korjaa käyttöoikeudet tai valitse toinen tiedosto."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Varmista että USB-tikku on kiinnitetty ja että sen tiedostojärjestelmä on FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Komennon `%(command)s` suorittamisessa oli ongelma.\nTarkempi virheloki on kirjoitettu tiedostoon ’%(filename)s’."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Tiedostojärjestelmää ei tueta: %s\nTee varmuuskopiot ja alusta USB-tikku FAT-tiedostojärjestelmällä."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Tästä painikkeesta voit selata Live-levykuvia, jotka on tallennettu koneellesi. Jos et valitse levykuvaa, julkaisu ladataan sinulle automaattisesti."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk ei ole saatavissa; win32com -kysely ei tuottanut tuloksia"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Tästä painikkeesta aloitetaan Live-USB:n valmistus. Valmistuksessa ladataan julkaisu (jos olemassaolevaa levykuvaa ei valita), puretaan ISO-levykuva USB-laitteelle, luodaan laitteelle pysyvä tallennustila ja asennetaan alkulatausohjelma."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ei voida löytää"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Tämä on USB-tikku, jolle haluat asentaa Live-käyttöjärjestelmän. Laitteen on oltava alustettu FAT-tiedostojärjestelmällä."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Tuntematon julkaisu: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Ladataan %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Tämä on edistymisen ilmaisin, joka kertoo, kuinka pitkällä LiveUSB:n luonti on"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Virhe: Nimiön tai laitteen UUID:n hakeminen epäonnistui. Jatkaminen epäonnistui."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Tämä on tilakonsoli, jonne kaikki viestit kirjoitetaan."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Asennus on valmis! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Yritetään silti jatkaa."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB-asema löydetty"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Varoitus: Ohjelma on ajettava järjestelmänvalvojana. Tämä onnistuu, kun napsautat kuvaketta oikealla hiirenpainikkeella ja valitset Ominaisuudet. Rastita Yhteensopivuus-välilehdestä kohta \"Suorita ohjelma järjestelmänvalvojana\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Taltion nimiön muuttaminen epäonnistui: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Komentoa chmod ei voi käyttää tiedostoon %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Tiedostoa %(infile)s ei voida kopioida kohteeseen %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "USB-laitetta ei löytynyt"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Laitteen \"%(pretty_name)s\" tallennustila ei riitä Tails:n asentamiseen (asennukseen vaaditaan vähintään %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Tuettua laitetta ei löydy"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Osiota ei löydy"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Asenna käyttäen ISO-levykuvaa\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk ei ole saatavissa; win32com -kysely ei tuottanut tuloksia"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Laitetta %(pretty_name)s ei voida päivittää, koska sitä ei ole luotu käyttäen Tails-asentajaa. Käytä sen sijaan %(action)s Tails:n päivittämiseen tässä laitteessa."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Päivitetään julkaisuja..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Julkaisut päivitetty!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Asennus on valmis!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Laitteen liittäminen epäonnistui"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Laitteen liittäminen epäonnistui: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Vahvista laitevalintasi"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Edellisen Live-käyttöjärjestelmän hakemistoa ei voi poistaa: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Olet asentamassa Tailsin %(size)s %(vendor)s %(model)s laitteelle (%(device)s). Kaikki tiedot asemalta menetetään. Jatketaanko?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Edellisen Live-käyttöjärjestelmän tiedostoa ei voi poistaa: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Olet päivittämässä Tailsin %(parent_size)s %(vendor)s %(model)s laitteelle (%(device)s). Mahdolliset pysyvät osiot jätetään ennalleen. Jatketaanko?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Lataus on valmis!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Lataus epäonnistui:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Voit yrittää jatkaa latausta"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR:ää ei voitu palauttaa. Pakettia ’syslinux’ ei ehkä ole asennettu."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Valittu tiedosto ei ole luettavissa. Korjaa käyttöoikeudet tai valitse toinen tiedosto."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Valittua tiedostoa ei voitu käyttää. Tämä saattaa onnistua paremmin, jos siirrät ISOn aseman juurihakemistoon (esim. C:\\)."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Laitteelle %(device)s ei voi kirjoittaa: vaihe ohitetaan."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Tunnistamaton ISO, ohitetaan tarkistussumman varmistus."
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Dbusissa tuntematon poikkeus, kun laitetta liitettiin: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s valittu"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Tuntematon tiedostojärjestelmä. Laitteesi on ehkä alustettava uudelleen."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Tuntematon julkaisu: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Irrotetaan ’%(udi)s’ laitteelta ’%(device)s’"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Irrotetaan liitetty tiedostojärjestelmä laitteelta ’%(device)s’"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Laitetta ’%(device)s’ ei tueta, ilmoita virheestä."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Tiedostojärjestelmä, jota ei tueta: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Tiedostojärjestelmää ei tueta: %s\nTee varmuuskopiot ja alusta USB-tikku FAT-tiedostojärjestelmällä."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Päivitetään järjestelmäosion %(system_partition)s ominaisuuksia"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Päivitä\nkloonaamalla"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Asenna Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Päivitä\nISO-levykuvalta"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Käytä olemassaolevaa Live-ISOa"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Varmistetaan ISO:n MD5-tarkistussumma"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Varmistetaan LiveCD-levykuvan SHA1-tarkistussumma..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Varmistetaan LiveCD-levykuvan SHA256-tarkistussumma..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Tarkistetaan tiedostojärjestelmää..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Varoitus: Uuden pysyvän tallennustilan luominen tuhoaa nykyisen."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Varoitus: Ohjelma on ajettava järjestelmänvalvojana. Tämä onnistuu, kun napsautat kuvaketta oikealla hiirenpainikkeella ja valitset Ominaisuudet. Rastita Yhteensopivuus-välilehdestä kohta \"Suorita ohjelma järjestelmänvalvojana\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Laitteelle kirjoitettiin nopeudella %(speed)d Mt/s"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Olet asentamassa Tailsin %(size)s %(vendor)s %(model)s laitteelle (%(device)s). Kaikki tiedot asemalta menetetään. Jatketaanko?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Olet päivittämässä Tailsin %(parent_size)s %(vendor)s %(model)s laitteelle (%(device)s). Mahdolliset pysyvät osiot jätetään ennalleen. Jatketaanko?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Käytät syslinux-extlinuxin vanhaa versiota, joka ei tue ext4-tiedostojärjestelmää"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Voit yrittää jatkaa latausta"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Ohjelma on suoritettava pääkäyttäjänä"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "tai"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/fil/fil.po b/fil/fil.po
index 45597cf..5efbac2 100644
--- a/fil/fil.po
+++ b/fil/fil.po
@@ -9,601 +9,561 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Filipino (http://www.transifex.com/otf/torproject/language/fil/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fil\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Plural-Forms: nplurals=2; plural=(n == 1 || n==2 || n==3) || (n % 10 != 4 || n % 10 != 6 || n % 10 != 9);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Dapat mong gamitin ang application na ito sa root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr ""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Ine-extract ang live image sa target device"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ang napili"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ito ay bootable na"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Mag-browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Hindi mahanap"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Hindi mahanap ang device %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Ang device ay hindi pa naisaksak, kaya hindi namin malaman kung ang laki ng libreng espasyo. "
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:692
#, python-format
-msgid "Download %(distribution)s"
+msgid ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Ang download ay tapos na! "
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Ang download ay pumalya. "
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "Nagda-download%s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Mali: Hindi mai-ayos ang label o makuha ang UUID ng iyong device. Hindi maipagpatuloy."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Walang mount points na mahanap"
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Ine-extract ang live image sa target device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "I-install ang Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Sinusubukan pa ring maghanap."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Ang installation ay kumpleto na! "
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Ang installation ay tapos na. Pindutin ang OK upang maisara ang program. "
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Ini-install ang bootloader..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Ang paggawa ng LiveUSB ay pumalya! "
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Siguraduhin na ang USB key ay naksaksak at naka format sa FAT filesystem"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Walang libreng espasyo sa device %(device)s"
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Walang mount points na mahanap"
+msgid "%s already bootable"
+msgstr "%s ito ay bootable na"
-#: ../liveusb/creator.py:410
-#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr ""
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Pakikonpirma ng inyong napiling device"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Hindi mahanap ang ibang sumusuportang device"
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr ""
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Siguraduhin na ang USB key ay naksaksak at naka format sa FAT filesystem"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr ""
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Hindi mahanap"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Nagda-download%s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Ang piniling file ay hindi mabasa. Ayusin ang mga permisyon o pumili ng ibang file. "
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Mali: Hindi mai-ayos ang label o makuha ang UUID ng iyong device. Hindi maipagpatuloy."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Ito ang USB stick na gusto mong i-install ng Live system. Itong device ay dapat nang na i-format kasama ng FAT filesystem. "
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ito ang progress bar na nagsasaad kung gaano kalayo na ang proseso ng paggawa iyong LiveUSB. "
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ito ang status console kunsaan ang lahat nang mensahe ay maisusulat"
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Sinusubukan pa ring maghanap."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Nakita na ang USB drive"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Hindi makahanap ng kahit anong USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Hindi mahanap ang ibang sumusuportang device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Ang installation ay kumpleto na! "
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr ""
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Pakikonpirma ng inyong napiling device"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr ""
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Ikaw ay magi-install ng Tails sa %(size)s %(vendor)s %(model)s device (%(device)s). Ang lahat ng laman ng piniling device at mawawaala. Ituloy?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr ""
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Ikaw ay maga-upgrade ng Tails sa %(parent_size)s %(vendor)s %(model)s device (%(device)s). Ang kahit anong persistent volume sa device na ito ay mananatiling hindi binago. Ituloy?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Ang download ay tapos na! "
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Ang download ay pumalya. "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Maaari mong subukan ulit para bumalik ang iyong download"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr ""
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Ang piniling file ay hindi mabasa. Ayusin ang mga permisyon o pumili ng ibang file. "
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Hindi magamit ang piniling file. Baka ikaw ay swetehin kung ililipat mo ang ISO mo sa root ng iyong device (ie: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s ang napili"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "I-install ang Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Babala: Mawawala ang dating persistent overlay kung gagawa ng bago. "
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Ikaw ay magi-install ng Tails sa %(size)s %(vendor)s %(model)s device (%(device)s). Ang lahat ng laman ng piniling device at mawawaala. Ituloy?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Ikaw ay maga-upgrade ng Tails sa %(parent_size)s %(vendor)s %(model)s device (%(device)s). Ang kahit anong persistent volume sa device na ito ay mananatiling hindi binago. Ituloy?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Ikaw ay gumagamit ng lumang bersyon ng syslinux-extlinux na hindi sumusuporta ng ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Maaari mong subukan ulit para bumalik ang iyong download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Dapat mong gamitin ang application na ito sa root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/fo/fo.po b/fo/fo.po
index 28d31c6..4847f3f 100644
--- a/fo/fo.po
+++ b/fo/fo.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Faroese (http://www.transifex.com/otf/torproject/language/fo/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: fo\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Innleggjari"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valt"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s kann longu startast"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s kann longu startast"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s valt"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/fr/fr.po b/fr/fr.po
index cd3fc19..b39d08f 100644
--- a/fr/fr.po
+++ b/fr/fr.po
@@ -27,8 +27,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-05-24 19:11+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 14:19+0000\n"
"Last-Translator: French language coordinator <french.coordinator at rbox.me>\n"
"Language-Team: French (http://www.transifex.com/otf/torproject/language/fr/)\n"
"MIME-Version: 1.0\n"
@@ -37,591 +37,551 @@ msgstr ""
"Language: fr\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "« Cloner et installer »"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Vous devez exécuter cette application en tant que superutilisateur"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "« Installer d'un ISO »"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extraction de l'image autonome vers le périphérique cible..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Programme d'installation de %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Écriture sur le périphérique effectuée à %(speed)d Mo/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s sélectionné"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configuration du fichier d'amorçage de l'OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Un problème est survenu lors de l'exécution de la commande suivante : « %(command)s »\nUn journal d'erreurs plus détaillé a été écrit dans le fichier « %(filename)s »."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Vérification de la somme de contrôle SHA1 de l'image du CD autonome..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s est déjà amorçable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Vérification de la somme de contrôle SHA256 de l'image du CD autonome..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Besoin d'aide ? Lisez la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installer Tails sur une autre clé USB en copiant le système Tails que vous utilisez actuellement.</li>\n\n<li>La clé USB sur laquelle vous installez est formatée et toutes les données sont perdues.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez actuellement n'est pas copiée.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Mettre à niveau une autre clé USB Tails vers la même version de Tails que vous utilisez actuellement.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous mettez à niveau est préservé.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez actuellement n'est pas copiée.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>>Mettre à niveau une autre clé USB Tails vers la version d'une image ISO.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous mettez à niveau est préservé.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez actuellement n'est pas copiée.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Parcourir"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "En allouant de l'espace supplémentaire sur votre clé USB pour une zone persistante, vous serez en mesure de stocker des données et d'effectuer des modifications permanentes sur votre système d'exploitation autonome. Sans cela, vous ne pourrez pas enregistrer de données qui seront conservées après un redémarrage."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calcul du SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Erreur : le SHA1 de votre CD autonome est invalide. Vous pouvez exécuter ce programme avec l'option « --noverify » pour contourner cette vérification."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Introuvable"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO inconnue, omission de la vérification de la somme de contrôle"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Périphérique %s introuvable"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Pas assez d'espace libre sur le périphérique.\nISO de %dMo + %dMo de persistance > %dMo d'espace libre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Création du volume persistant de %s Mo"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Le périphérique n'est pas encore monté, nous ne pouvons donc pas déterminer la quantité d'espace libre."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Télécharger %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Le téléchargement est terminé !"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Impossible de copier %(infile)s vers %(outfile)s : %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Échec de téléchargement : "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Suppression du SE autonome existant"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Téléchargement de %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Le périphérique est une boucle avec retour, omission de la réinitialisation du MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod impossible %(file)s : %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Saisie de unmount_device pour « %(device)s »"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Erreur d'examen du périphérique"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Erreur : impossible de définir l'étiquette ou d'obtenir l'UUID de votre périphérique. Impossible de poursuivre."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Erreur : le SHA1 de votre CD autonome est invalide. Vous pouvez exécuter ce programme avec l'option « --noverify » pour contourner cette vérification."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extraction de l'image autonome vers le périphérique cible..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Impossible d'enlever le fichier du SE autonome précédent : %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatage de %(device)s en FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "La vérification de la somme de contrôle MD5 de l'ISO est réussie"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Impossible d'enlever le répertoire du SE autonome précédent : %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Échec de vérification de la somme de contrôle MD5 de l'ISO"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Périphérique %s introuvable"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Si vous ne sélectionnez pas un ISO autonome existant, la version choisie sera téléchargée pour vous."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Impossible d'écrire sur %(device)s, passage à l'étape suivante."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installer par clonage"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Certaines partitions du périphérique cible %(device)s sont montées. Elles seront démontées avant de démarrer le processus d'installation."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Système de fichiers inconnu. Votre périphérique doit être reformaté."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation terminée !"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Système de fichiers non pris en charge : %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation terminée ! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Exception GLib inconnue en tentant de monter le périphérique : %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "L'installation est terminée. Appuyez sur OK pour fermer ce programme."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Impossible de monter le périphérique : %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installation du chargeur de démarrage..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Aucun point de montage trouvé"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Il est impossible de mettre le dispositif %(pretty_name)s à niveau car il n'a pas été créé en utilisant le programme d'installation de Tails. Vous devriez plutôt utiliser %(action)s pour mettre Tails à niveau sur ce dispositif."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Échec de création de l'USB autonome !"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Saisie de unmount_device pour « %(device)s »"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Bien extraire l'archive zip de liveusb-creator en entier avant d'exécuter ce programme."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Démontage des systèmes de fichiers sur '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Assurez-vous que votre clé USB est branchée et qu'elle est formatée avec le système de fichiers FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Démontage de '%(udi)s' sur '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Le montage %s existe après démontage"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Aucun espace libre sur le périphérique %(device)s."
+msgid "Partitioning device %(device)s"
+msgstr "Partitionnement du périphérique %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Aucun point de montage trouvé"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Mise à jour des propriétés de la partition système %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Pas assez d'espace libre sur le périphérique.\nISO de %dMo + %dMo de persistance > %dMo d'espace libre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Périphérique « %(device)s » non prise en charge, veuillez signaler le bogue."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partition est en FAT16; restriction de la persistance à 2 Go"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Nous nous efforçons de continuer quand même."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partition est en FAT32 ; restriction de la persistance à 4 Go."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Vérification du système de fichiers..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitionnement du périphérique %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Impossible de changer l'étiquette du volume : %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Stockage persistant"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installation du chargeur de démarrage..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Stockage persistant (0 Mo)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Impossible de trouver le module '%s' COM32"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Veuillez confirmer votre choix de périphérique"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Suppression de %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Rafraîchissement des versions..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s est déjà amorçable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versions mises à jour !"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Impossible de trouver la partition"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Suppression de %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatage de %(device)s en FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Suppression du SE autonome existant"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Impossible de trouver syslinux' gptmbr.bin"
+
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Lecture du MBR extrait de %s"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Impossible de lire le MBR extrait de %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Réinitialisation de l'enregistrement d'amorçage maître (MBR) de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Sélectionnez l'ISO autonome"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configuration du fichier d'amorçage de l'OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Le périphérique est une boucle avec retour, omission de la réinitialisation du MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Certaines partitions du périphérique cible %(device)s sont montées. Elles seront démontées avant de démarrer le processus d'installation."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Ce type de source ne permet pas la vérification de la somme de contrôle MD5 de l'ISO, passage à l'étape suivante"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calcul du SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronisation des données sur le disque..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Périphérique cible"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Erreur d'examen du périphérique"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Le dispositif « %(pretty_name)s » est trop petit pour installer Tails (au moins %(size)s Go sont exigés)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Aucun périphérique pris en charge n'a été trouvé"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Le fichier sélectionné est illisible. Veuillez changer ses droits ou sélectionner un autre fichier."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Assurez-vous que votre clé USB est branchée et qu'elle est formatée avec le système de fichiers FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Un problème est survenu lors de l'exécution de la commande suivante : « %(command)s »\nUn journal d'erreurs plus détaillé a été écrit dans le fichier « %(filename)s »."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Système de fichiers non pris en charge : %s\nVeuillez sauvegarder votre clé USB et la formater avec le système de fichiers FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ce bouton vous permet de rechercher l'ISO d'un système autonome que vous auriez téléchargé auparavant. Si vous n'en sélectionnez pas, une version sera téléchargée pour vous automatiquement."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Impossible d'obtenir Win32_LogicalDisk ; la requête win32com n'a retourné aucun résultat."
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ce bouton démarrera le processus de création de la clé USB autonome. Cela implique le téléchargement facultatif d'une version (si une version existante n'a pas sélectionné), l'extraction de l'ISO sur le périphérique USB, la création d'un volume persistant, et l'installation du chargeur de démarrage."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Introuvable"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "C'est la clé USB sur laquelle vous souhaitez installer votre système autonome. Elle doit être formatée avec le système de fichiers FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Assurez-vous d'extraire le fichier zip entier du programme d'installation Tails avant d'exécuter ce programme."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Version inconnue : %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Téléchargement de %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ceci est la barre de progression qui vous indiquera l'avancement de la création de la clé USB autonome."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Erreur : impossible de définir l'étiquette ou d'obtenir l'UUID de votre périphérique. Impossible de poursuivre."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ceci est la console d'état, où tous les messages sont inscrits."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation terminée ! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Nous nous efforçons de continuer quand même."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "L'installation de Tails a échoué !"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Attention : cet outil doit être exécuté en tant qu'Administrateur. Pour cela, clic-droit sur l'icône et ouvrez les Propriétés. Dans l'onglet Compatibilité, cochez la case \"Exécuter ce programme en tant qu'Administrateur\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Programme d'installation Tails"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Un lecteur USB a été trouvé"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Aucun périphérique compatible n'a été trouvé pour installer Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Impossible de changer l'étiquette du volume : %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Veuillez connecter une clé USB ou une carte SD d'au moins %0.1f Go."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod impossible %(file)s : %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Impossible de copier %(infile)s vers %(outfile)s : %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Impossible de trouver un lecteur USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Le dispositif « %(pretty_name)s » est trop petit pour installer Tails (au moins %(size)s Go sont exigés)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Aucun périphérique pris en charge n'a été trouvé"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr " « Installer par clonage »"
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Impossible de trouver la partition"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "« Installer d'un ISO »"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Impossible d'obtenir Win32_LogicalDisk ; la requête win32com n'a retourné aucun résultat."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Il est impossible de mettre le dispositif %(pretty_name)s à niveau car il n'a pas été créé en utilisant le programme d'installation de Tails. Vous devriez plutôt utiliser %(action)s pour mettre Tails à niveau sur ce dispositif."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Une erreur est survenue lors de l'installation de Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Rafraîchissement des versions..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versions mises à jour !"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation terminée !"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "L'installation est terminée."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Impossible de monter le périphérique"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Impossible de monter le périphérique : %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Veuillez confirmer votre choix de périphérique"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Impossible d'enlever le répertoire du SE autonome précédent : %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Vous allez installer Tails sur le périphérique %(size)s %(vendor)s %(model)s (%(device)s). Toutes les données sur le périphérique sélectionné seront perdues. Poursuivre ?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Impossible d'enlever le fichier du SE autonome précédent : %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Vous allez mettre à niveau Tails sur le périphérique (%(device)s) %(parent_size)s %(vendor)s %(model)s. Tout volume persistant sur ce périphérique restera inchangé. Poursuivre ?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Le téléchargement est terminé !"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Échec de téléchargement : "
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Vous pouvez essayer de reprendre votre téléchargement"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Impossible de réinitialiser le MBR. Le paquet `syslinux` n'est sans doute pas installé."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Le fichier sélectionné est illisible. Veuillez changer ses droits ou sélectionner un autre fichier."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Impossible d'utiliser le fichier choisi. Vous devriez avoir plus de chance en déplaçant l'ISO sur la racine de votre disque (c.-à-d. : C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Impossible d'écrire sur %(device)s, passage à l'étape suivante."
+msgid "%(filename)s selected"
+msgstr "%(filename)s sélectionné"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO inconnue, omission de la vérification de la somme de contrôle"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Impossible de trouver le SE autonome sur l'ISO"
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Exception dbus inconnue lors de la tentative de montage du périphérique : %(message)s"
-
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Système de fichiers inconnu. Votre périphérique doit être reformaté."
+msgid "Could not guess underlying block device: %s"
+msgstr "Impossible de deviner le périphérique de blocs sous-jacent : %s"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unknown release: %s"
-msgstr "Version inconnue : %s"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Un problème est survenu lors de l'exécution de `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Démontage de '%(udi)s' sur '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' n'existe pas"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Démontage des systèmes de fichiers sur '%(device)s'"
+msgid "'%s' is not a directory"
+msgstr "'%s' n'est pas un répertoire"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Périphérique « %(device)s » non prise en charge, veuillez signaler le bogue."
+msgid "Skipping '%(filename)s'"
+msgstr "'%(filename)s' est ignoré"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Système de fichiers non pris en charge : %s"
-
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Système de fichiers non pris en charge : %s\nVeuillez sauvegarder votre clé USB et la formater avec le système de fichiers FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Un problème est survenu lors de l'exécution de `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Mise à jour des propriétés de la partition système %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Impossible d'ouvrir le périphérique en lecture."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Mettre à niveau par clonage"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Utiliser un ISO de système autonome existant :"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Choisir une version à télécharger :"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Périphérique cible :"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Mettre à niveau à partir d'une ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Pour exécuter le programme d'installation Tails, il vous faut une image ISO qui peut être téléchargée du site Web de Tails : <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Utiliser un ISO de système autonome existant"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installer"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Vérification de la somme de contrôle MD5 de l'ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Installer Tails sur une nouvelle clé USB."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Vérification de la somme de contrôle SHA1 de l'image du CD autonome..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• La clé USB sur laquelle vous installez est formatée et toutes les données seront perdues"
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Vérification de la somme de contrôle SHA256 de l'image du CD autonome..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Mettre à niveau"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Vérification du système de fichiers..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Mettre à niveau une clé USB Tails vers la version d'une image ISO."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Attention : la création d'une nouvelle zone de stockage persistant supprimera celle déjà existante."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Le stockage persistant chiffré de la clé USB que vous mettez à niveau est préservé."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Attention : cet outil doit être exécuté en tant qu'Administrateur. Pour cela, clic-droit sur l'icône et ouvrez les Propriétés. Dans l'onglet Compatibilité, cochez la case \"Exécuter ce programme en tant qu'Administrateur\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Besoin d'aide ? Consulter la <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Écriture sur le périphérique effectuée à %(speed)d Mo/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Installer par clonage"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Vous allez installer Tails sur le périphérique %(size)s %(vendor)s %(model)s (%(device)s). Toutes les données sur le périphérique sélectionné seront perdues. Poursuivre ?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Installer Tails sur une autre clé USB en copiant le système Tails que vous utilisez actuellement."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Vous allez mettre à niveau Tails sur le périphérique (%(device)s) %(parent_size)s %(vendor)s %(model)s. Tout volume persistant sur ce périphérique restera inchangé. Poursuivre ?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Le stockage persistant chiffré de la clé USB que vous utilisez actuellement n'est pas copié."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Mettre à niveau par clonage"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Vous utilisez une version obsolète de syslinux-extlinux, qui ne permet pas d'utiliser le système de fichiers ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Mettre à niveau une autre clé USB Tails vers la même version de Tails que vous utilisez actuellement."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Vous pouvez essayer de reprendre votre téléchargement"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Mettre à niveau à partir d'une ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Vous devez exécuter cette application en tant que superutilisateur"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Mettre à niveau une autre clé USB Tails vers la version d'une image ISO."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ou"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Besoin d'aide ? Consulter la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.fr.html\">documentation</a>"
diff --git a/fr_CA/fr_CA.po b/fr_CA/fr_CA.po
index e1b5561..5f6f9ff 100644
--- a/fr_CA/fr_CA.po
+++ b/fr_CA/fr_CA.po
@@ -7,20 +7,21 @@
# Charles-Antoine Couret, 2009
# Charles-Antoine Couret <cacouret at wanadoo.fr>, 2009
# Eric lassauge <lassauge {AT} users {dot} sourceforge {dot} net>, 2010
-# French language coordinator <french.translation at rbox.me>, 2016
+# French language coordinator <french.coordinator at rbox.me>, 2017
+# French language coordinator <french.coordinator at rbox.me>, 2016
# Jean-Yves Toumit <saiolar-c at yahoo.fr>, 2013
# Martin-Gomez Pablo <pablomg+transifex at eskapa.be>, 2008
# Michael Ughetto <telimektar1er at gmail.com>, 2008
# Onizuka, 2013
-# French language coordinator <french.translation at rbox.me>, 2015
-# French language coordinator <french.translation at rbox.me>, 2014-2015
+# French language coordinator <french.coordinator at rbox.me>, 2015
+# French language coordinator <french.coordinator at rbox.me>, 2014-2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-12-21 22:32+0000\n"
-"Last-Translator: French language coordinator <french.translation at rbox.me>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 14:53+0000\n"
+"Last-Translator: French language coordinator <french.coordinator at rbox.me>\n"
"Language-Team: French (Canada) (http://www.transifex.com/otf/torproject/language/fr_CA/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -28,591 +29,551 @@ msgstr ""
"Language: fr_CA\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "« Cloner et installer »"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Vous devez exécuter cette application en tant que root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "« Installer d'un ISO »"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extraction de l'image autonome vers le périphérique cible..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Programme d'installation de %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Écriture sur le périphérique effectuée à %(speed)d Mo/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s sélectionné"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configuration du fichier d'amorçage de l'OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Un problème est survenu lors de l'exécution de la commande suivante : « %(command)s »\nUn journal d'erreurs plus détaillé a été écrit dans le fichier « %(filename)s »."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Vérification de la somme de contrôle SHA1 de l'image du CD autonome..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s est déjà amorçable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Vérification de la somme de contrôle SHA256 de l'image du CD autonome..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Besoin d'aide? Lisez la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>>Installer Tails sur une autre clé USB en copiant le système Tails que vous utilisez présentement.</li>\n\n<li>La clé USB sur laquelle vous installez est formatée et toutes les données sont perdues.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez présentement n'est pas copié.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Mettre à niveau une autre clé USB Tails vers la même version de Tails que vous utilisez présentement.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous mettez à niveau est préservé.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez présentement n'est pas copié.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>>Mettre à niveau une autre clé USB Tails vers la version d'une image ISO.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous mettez à niveau est préservé.</li>\n\n<li>Le stockage persistant chiffré de la clé USB Tails que vous utilisez présentement n'est pas copié.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Parcourir"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "En allouant de l'espace supplémentaire sur votre clé USB pour une zone persistante, vous serez en mesure de stocker des données et d'effectuer des modifications permanentes sur votre système d'exploitation autonome. Sans cela, vous ne pourrez pas enregistrer de données qui seront conservées après un redémarrage."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calcul du SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Erreur : le SHA1 de votre CD autonome est invalide. Vous pouvez exécuter ce programme avec l'option « --noverify » pour contourner cette vérification."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Introuvable"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO inconnue, omission de la vérification de la somme de contrôle"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Périphérique %s introuvable"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Pas assez d'espace libre sur le périphérique.\nISO de %dMo + %dMo de persistance > %dMo d'espace libre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Création du stockage persistant de %s Mo"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Le périphérique n'est pas encore monté, nous ne pouvons donc pas déterminer la quantité d'espace libre."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Télécharger %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Le téléchargement est terminé!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Impossible de copier %(infile)s vers %(outfile)s : %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Échec de téléchargement : "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Suppression du SE autonome existant"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Téléchargement de %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Le périphérique est une boucle avec retour, omission de la réinitialisation du MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod impossible %(file)s : %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Saisie de unmount_device pour « %(device)s »"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Erreur d'examen du périphérique"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Erreur : impossible de définir l'étiquette ou d'obtenir l'UUID de votre périphérique. Impossible de poursuivre."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Erreur : le SHA1 de votre CD autonome est invalide. Vous pouvez exécuter ce programme avec l'option « --noverify » pour contourner cette vérification."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extraction de l'image autonome vers le périphérique cible..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Impossible d'enlever le fichier du SE autonome précédent : %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatage de %(device)s en FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "La vérification de la somme de contrôle MD5 de l'ISO est réussie"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Impossible d'enlever le répertoire du SE autonome précédent : %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Échec de vérification de la somme de contrôle MD5 de l'ISO"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Périphérique %s introuvable"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Si vous ne sélectionnez pas un ISO autonome existant, la version choisie sera téléchargée pour vous."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Impossible d'écrire sur %(device)s, passage à l'étape suivante."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installer par clonage"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Certaines partitions du périphérique cible %(device)s sont montées. Elles seront démontées avant de démarrer le processus d'installation."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Système de fichiers inconnu. Votre périphérique doit être reformaté."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation terminée!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Système de fichiers non pris en charge : %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation terminée! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Exception GLib inconnue en tentant de monter le périphérique : %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "L'installation est terminée. Appuyez sur OK pour fermer ce programme."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Impossible de monter le périphérique : %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installation du chargeur de démarrage..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Aucun point de montage trouvé"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Il est impossible de mettre le dispositif %(pretty_name)s à niveau car il n'a pas été créé en utilisant le programme d'installation de Tails. Vous devriez plutôt utiliser %(action)s pour mettre Tails à niveau sur ce dispositif."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Échec de création de l'USB autonome!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Saisie de unmount_device pour « %(device)s »"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Bien extraire l'archive zip de liveusb-creator en entier avant d'exécuter ce programme."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Démontage des systèmes de fichiers montés sur « %(device)s »"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Assurez-vous que votre clé USB est branchée et qu'elle est formatée avec le système de fichiers FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Démontage de « %(udi)s » sur « %(device)s »"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Le montage %s existe après démontage"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Aucun espace libre sur le périphérique %(device)s."
+msgid "Partitioning device %(device)s"
+msgstr "Partitionnement du périphérique %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Aucun point de montage trouvé"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Mise à jour des propriétés de la partition système %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Pas assez d'espace libre sur le périphérique.\nISO de %dMo + %dMo de persistance > %dMo d'espace libre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Périphérique « %(device)s » non prise en charge, veuillez signaler le bogue."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partition est en FAT16; restriction de la persistance à 2 Go"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Nous nous efforçons de continuer quand même."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partition est en FAT32; restriction de la persistance à 4 Go"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Vérification du système de fichiers..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitionnement du périphérique %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Impossible de changer l'étiquette du volume : %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Stockage persistant"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installation du chargeur de démarrage..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Stockage persistant (0 Mo)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Impossible de trouver le module '%s' COM32"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Veuillez confirmer votre choix de périphérique"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Suppression de %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Rafraîchissement des versions..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s est déjà amorçable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versions mises à jour!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Impossible de trouver la partition"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Suppression de %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatage de %(device)s en FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Suppression du SE autonome existant"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Impossible de trouver syslinux' gptmbr.bin"
+
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Lecture du MBR extrait de %s"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Impossible de lire le MBR extrait de %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Réinitialisation de l'enregistrement d'amorçage maître (MBR) de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Sélectionnez l'ISO autonome"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configuration du fichier d'amorçage de l'OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Le périphérique est une boucle avec retour, omission de la réinitialisation du MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Certaines partitions du périphérique cible %(device)s sont montées. Elles seront démontées avant de démarrer le processus d'installation."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Ce type de source ne permet pas la vérification de la somme de contrôle MD5 de l'ISO, passage à l'étape suivante"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calcul du SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronisation des données sur le disque..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Périphérique cible"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Erreur d'examen du périphérique"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Le dispositif « %(pretty_name)s » est trop petit pour installer Tails (au moins %(size)s Go sont exigés)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Aucun périphérique pris en charge n'a été trouvé"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Le fichier sélectionné est illisible. Veuillez changer ses droits ou sélectionner un autre fichier."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Assurez-vous que votre clé USB est branchée et qu'elle est formatée avec le système de fichiers FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Un problème est survenu lors de l'exécution de la commande suivante : « %(command)s »\nUn journal d'erreurs plus détaillé a été écrit dans le fichier « %(filename)s »."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Système de fichiers non pris en charge : %s\nVeuillez sauvegarder votre clé USB et la formater avec le système de fichiers FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ce bouton vous permet de rechercher l'ISO d'un système autonome que vous auriez déjà téléchargé. Si vous n'en choisissez pas, une version sera téléchargée pour vous automatiquement."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Impossible d'obtenir Win32_LogicalDisk; la requête win32com n'a retourné aucun résultat."
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ce bouton démarrera le processus de création de la clé USB autonome. Cela implique le téléchargement facultatif d'une version (si une version existante n'a pas sélectionné), l'extraction de l'ISO sur le périphérique USB, la création d'une zone persistante, et l'installation du chargeur de démarrage."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Introuvable"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "C'est la clé USB sur laquelle vous souhaitez installer votre système autonome. Elle doit être formatée avec le système de fichiers FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Assurez-vous d'extraire le fichier zip entier du programme d'installation Tails avant d'exécuter ce programme."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Version inconnue : %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Téléchargement de %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ceci est la barre de progression qui vous indiquera l'avancement de la création de la clé USB autonome."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Erreur : impossible de définir l'étiquette ou d'obtenir l'UUID de votre périphérique. Impossible de poursuivre."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ceci est la console d'état, où tous les messages sont inscrits."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation terminée! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Nous nous efforçons de continuer quand même."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "L'installation de Tails a échoué !"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Avertissement : cet outil doit être lancé en tant qu'administrateur. Pour cela, cliquer-droit sur l'icône et ouvrir les propriétés. Dans l'onglet compatibilité, cocher la case \"Lancer ce programme en tant qu'administrateur\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Programme d'installation Tails"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Un lecteur USB a été trouvé"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Aucun périphérique compatible n'a été trouvé pour installer Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Impossible de changer l'étiquette du volume : %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Veuillez connecter une clé USB ou une carte SD d'au moins %0.1f Go."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod impossible %(file)s : %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Impossible de copier %(infile)s vers %(outfile)s : %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Impossible de trouver un lecteur USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Le dispositif « %(pretty_name)s » est trop petit pour installer Tails (au moins %(size)s Go sont exigés)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Aucun périphérique pris en charge n'a été trouvé"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr " « Installer par clonage »"
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Impossible de trouver la partition"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "« Installer d'un ISO »"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Impossible d'obtenir Win32_LogicalDisk; la requête win32com n'a retourné aucun résultat."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Il est impossible de mettre le dispositif %(pretty_name)s à niveau car il n'a pas été créé en utilisant le programme d'installation de Tails. Vous devriez plutôt utiliser %(action)s pour mettre Tails à niveau sur ce dispositif."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Une erreur est survenue lors de l'installation de Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Rafraîchissement des versions..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versions mises à jour!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation terminée!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "L'installation est terminée."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Impossible de monter le périphérique"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Impossible de monter le périphérique : %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Veuillez confirmer votre choix de périphérique"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Impossible d'enlever le répertoire du SE autonome précédent : %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Vous allez installer Tails sur le périphérique %(size)s %(vendor)s %(model)s (%(device)s). Toutes les données sur le périphérique sélectionné seront perdues. Poursuivre?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Impossible d'enlever le fichier du SE autonome précédent : %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Vous allez mettre à niveau Tails sur le périphérique (%(device)s) %(parent_size)s %(vendor)s %(model)s. Tout volume persistant sur ce périphérique restera inchangé. Poursuivre ?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Le téléchargement est terminé!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Échec de téléchargement : "
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Vous pouvez essayer de reprendre votre téléchargement"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Impossible de réinitialiser le MBR. Le paquet « syslinux » n'est peut-être pas installé."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Le fichier sélectionné est illisible. Veuillez changer ses droits ou sélectionner un autre fichier."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Impossible d'utiliser le fichier choisi. Vous devriez avoir plus de chance en déplaçant l'ISO sur la racine de votre disque (c.-à-d. : C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Impossible d'écrire sur %(device)s, passage à l'étape suivante."
+msgid "%(filename)s selected"
+msgstr "%(filename)s sélectionné"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO inconnue, omission de la vérification de la somme de contrôle"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Impossible de trouver le SE autonome sur l'ISO"
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Exception dbus inconnue lors de la tentative de montage du périphérique : %(message)s"
-
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Système de fichiers inconnu. Votre périphérique doit être reformaté."
+msgid "Could not guess underlying block device: %s"
+msgstr "Impossible de deviner le périphérique de blocs sous-jacent : %s"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unknown release: %s"
-msgstr "Version inconnue : %s"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Un problème est survenu lors de l'exécution de `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Démontage de « %(udi)s » sur « %(device)s »"
+msgid "'%s' does not exist"
+msgstr "'%s' n'existe pas"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Démontage des systèmes de fichiers montés sur « %(device)s »"
+msgid "'%s' is not a directory"
+msgstr "'%s' n'est pas un répertoire"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Périphérique « %(device)s » non prise en charge, veuillez signaler le bogue."
+msgid "Skipping '%(filename)s'"
+msgstr "'%(filename)s' est ignoré"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Système de fichiers non pris en charge : %s"
-
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Système de fichiers non pris en charge : %s\nVeuillez sauvegarder votre clé USB et la formater avec le système de fichiers FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Un problème est survenu lors de l'exécution de `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Mise à jour des propriétés de la partition système %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Impossible d'ouvrir le périphérique en lecture."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Mettre à niveau par clonage"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Utiliser un ISO de système autonome existant :"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Choisir une version à télécharger :"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Périphérique cible :"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Mettre à niveau à partir d'une ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Pour exécuter le programme d'installation Tails, il vous faut une image ISO qui peut être téléchargée du site Web de Tails : <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Utiliser un ISO de système autonome existant"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installer"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Vérification de la somme de contrôle MD5 de l'ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Installer Tails sur une nouvelle clé USB."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Vérification de la somme de contrôle SHA1 de l'image du CD autonome..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• La clé USB sur laquelle vous installez est formatée et toutes les données seront perdues"
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Vérification de la somme de contrôle SHA256 de l'image du CD autonome..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Mettre à niveau"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Vérification du système de fichiers..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Mettre à niveau une clé USB Tails vers la version d'une image ISO."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Avertissement : la création d'un nouveau stockage persistant supprimera celui déjà existant."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Le stockage persistant chiffré de la clé USB que vous mettez à niveau est préservé."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Avertissement : cet outil doit être lancé en tant qu'administrateur. Pour cela, cliquer-droit sur l'icône et ouvrir les propriétés. Dans l'onglet compatibilité, cocher la case \"Lancer ce programme en tant qu'administrateur\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Besoin d'aide ? Consulter la <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Écriture sur le périphérique effectuée à %(speed)d Mo/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Installer par clonage"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Vous allez installer Tails sur le périphérique %(size)s %(vendor)s %(model)s (%(device)s). Toutes les données sur le périphérique sélectionné seront perdues. Poursuivre?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Installer Tails sur une autre clé USB en copiant le système Tails que vous utilisez actuellement."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Vous allez mettre à niveau Tails sur le périphérique (%(device)s) %(parent_size)s %(vendor)s %(model)s. Tout volume persistant sur ce périphérique restera inchangé. Poursuivre ?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Le stockage persistant chiffré de la clé USB que vous utilisez actuellement n'est pas copié."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Mettre à niveau par clonage"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Vous utilisez une version ancienne de syslinux-extlinux qui ne prend pas en charge le système de fichiers ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Mettre à niveau une autre clé USB Tails vers la même version de Tails que vous utilisez actuellement."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Vous pouvez essayer de reprendre votre téléchargement"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Mettre à niveau à partir d'une ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Vous devez exécuter cette application en tant que root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Mettre à niveau une autre clé USB Tails vers la version d'une image ISO."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ou"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Besoin d'aide ? Consulter la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.fr.html\">documentation</a>"
diff --git a/fur/fur.po b/fur/fur.po
index 9e2d677..a08a883 100644
--- a/fur/fur.po
+++ b/fur/fur.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Friulian (http://www.transifex.com/otf/torproject/language/fur/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: fur\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/fy/fy.po b/fy/fy.po
index 6109a77..ec59620 100644
--- a/fy/fy.po
+++ b/fy/fy.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Western Frisian (http://www.transifex.com/otf/torproject/language/fy/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: fy\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Blêdzje"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "of"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ga/ga.po b/ga/ga.po
index 453b94f..b2400e2 100644
--- a/ga/ga.po
+++ b/ga/ga.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Irish (http://www.transifex.com/otf/torproject/language/ga/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ga\n"
"Plural-Forms: nplurals=5; plural=(n==1 ? 0 : n==2 ? 1 : n<7 ? 2 : n<11 ? 3 : 4);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/gd/gd.po b/gd/gd.po
index 6c1a261..f823093 100644
--- a/gd/gd.po
+++ b/gd/gd.po
@@ -7,9 +7,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2012-10-03 17:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Gaelic, Scottish (http://www.transifex.com/otf/torproject/language/gd/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: gd\n"
"Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : (n > 2 && n < 20) ? 2 : 3;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/gl/gl.po b/gl/gl.po
index 68d76a5..b024044 100644
--- a/gl/gl.po
+++ b/gl/gl.po
@@ -4,16 +4,16 @@
#
# Translators:
# pakoR <gmpakor at gmail.com>, 2015
-# Luz Varela Armas <luz.armas at udc.es>, 2014
+# Eu <luz.armas at udc.es>, 2014
# manuel meixide <m.meixide at gmail.com>, 2013
# Xan VFR, 2016
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Xan VFR\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Galician (http://www.transifex.com/otf/torproject/language/gl/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -21,591 +21,551 @@ msgstr ""
"Language: gl\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Debe executar esta aplicación como root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar dende ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extraendo imaxen en vivo ao dispositivo destino..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Instalador"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Escribín no dispositivo a %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seleccionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Preparando ficheiro de arranque OLPC"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Houbo un problema ao excutar o seguinte comando: `%(command)s`.\nUn rexistro de erros máis detallado escribiuse en '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificando checksum SHA1 da imaxe LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s xa é arrincable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificando checksum SHA256 da imaxe LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Necesita axuda? Lea a <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentación</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalar Tails noutra chave USB copiando o sistema Tails que vostede está a usar..</li>\n\n<li>A chave USB na que instala está formateada e perdéronse tódolos datos.</li>\n\n<li>O almacenamento persistente cifrado da chave USB do Tails que vostede está a usar non se copiou.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizar outra chave USB Tails á mesma versión de Tails que vostede está a usar.</li>\n\n<li>Consérvase o almacenamento persistente cifrado da chave USB de Tails que actualiza.</li>\n\n<li>O almacenamento persistente cifrado da chave USB de Tails que vostede está a usar non se copia.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizar aoutra chave USB de Tails á versión dunha imaxe ISO.</li>\n\n<li>Consérvase o almacenamento persistente cifrado da chave USB de Tails que actualiza.</li>\n\n<li>O almacenamento persistente cifrado da chave USB de Tails que vostede está a usar non se copia.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Examinar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Asignando espacio extra na sua chave USB para unha distribución persistente, poderá almacenar datos e facer modificacións permanentes ao seu sistema operativo en vivo. Sen el, non poderá gardar datos que persistan tras un reinicio."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculando o SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Erro: O SHA1 do seu Live CD non é válido. Pode executar este programa co argumento --noverify para evitar esta verificación."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Non se pode atopar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO descoñecida, saltando verificación checksum"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Non podo atopar o dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Non hai suficiente espacio libre no dispositivo.\n%dMB ISO + %dMB distribución > %dMB espacio libre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creando %sMB de distribución persistente"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "O dispositivo aínda non está montado, de modo que non podemos determinar canto espacio libre hai."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Descargar %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Completouse a descarga!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Imposible copiar %(infile)s en %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Produciuse un erro na descarga:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Eliminando Live OS existentes"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Descargando %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "A unidade é un loopback, omitindo reinicio do MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Imposible chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Entrando unmount_device para '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Produciuse un erro sondando o dispositivo"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Erro: Non se puido configurar a etiqueta ou obter o UUID do dispositivo. Non se pode continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Erro: O SHA1 do seu Live CD non é válido. Pode executar este programa co argumento --noverify para evitar esta verificación."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extraendo imaxen en vivo ao dispositivo destino..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Non foi posíbel borrar fichero de LiveOS previo: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formateando %(device)s como FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Checksum MD5 da ISO pasada"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Non foi posíbel borrar directorio de LiveOS previo: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verificación checksum MD5 da ISO fallida"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Non podo atopar o dispositivo %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Se non selecciona una Live ISO existente, a versión seleccionada será descargada para vostede."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Imposible escribir en %(device)s, saltando."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalar\nclonando"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algunhas particións do dispositivo destino %(device)s están montadas. Serán desmontadas antes de comezar o proceso de instalación."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalar Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistema de ficheiros descoñecido. Poida que necesite reformatear o seu dispositivo."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalación completa!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Sistema de ficheiros non soportado: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalación completa! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "A instalación foi rematada. Prema Aceptar para pechar este programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Non foi posíbel montar o dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalando bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Non se atoparon puntos de montaxe"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Imposible actualizar o dispositivo %(pretty_name)s porque non foi creado usando o Instalador de Tails. Debería en cambio usar %(action)s para actualizar Tails neste dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Fallou a creación do LiveUSB!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Entrando unmount_device para '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Asegúrese de extraer por completo o ficheiro zip liveusb-creator antes de executar este programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Desmontando sistemas de ficheiros montados en '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Asegúrese de que a súa chave USB está enchufada e formateada cun sistema de ficheiros FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Desmontando '%(udi)s' en '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "A montaxe %s existe despois de desmontar"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Non hai espazo libre no dispositivo %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Particionando dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Non se atoparon puntos de montaxe"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Actualizando as propiedades da partición de sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Non hai suficiente espacio libre no dispositivo.\n%dMB ISO + %dMB distribución > %dMB espacio libre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dispositivo '%(device)s' non soportado, por favor informe dun bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "A partición é FAT16; Restrinxindo o tamaño de superposición a 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Tentando continuar igualmente."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "A partición é FAT32; Restrinxindo o tamaño da distribución a 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificando sistema de ficheiros..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Particionando dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Imposible cambiar a etiqueta de volume: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Almacenamento persistente"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalando bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Almacenamento Persistente (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Por favor confirme a súa selección de dispositivo"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Eliminando %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Refrescando versións..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s xa é arrincable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versións actualizadas!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Incapaz de atopar unha partición"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Eliminando %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formateando %(device)s como FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Eliminando Live OS existentes"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Restablecendo Master Boot Record de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Seleccione Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Preparando ficheiro de arranque OLPC"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "A unidade é un loopback, omitindo reinicio do MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algunhas particións do dispositivo destino %(device)s están montadas. Serán desmontadas antes de comezar o proceso de instalación."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "O tipo de fonte non soporta verificación checksum MD5 da ISO, saltando"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculando o SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizando datos no disco..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo Destino"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Produciuse un erro sondando o dispositivo"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "O dispositivo \"%(pretty_name)s\" é demasiado pequeno para instalar Tails (precísanse alomenos %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Non foi posíbel atopar ningún dispositivo soportado"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Non se pode ler o ficheiro seleccionado. Por favor amañe os seus permisos ou seleccione outro ficheiro."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Asegúrese de que a súa chave USB está enchufada e formateada cun sistema de ficheiros FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Houbo un problema ao excutar o seguinte comando: `%(command)s`.\nUn rexistro de erros máis detallado escribiuse en '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de ficheiros non soportado: %s\nPor favor faga unha copia de seguridade e formatee a súa chave USB cun sistema de ficheiros FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Este botón permítelle buscar una Live ISO que vostede descargara previamente. Se non seleccion unha, descargarase automáticamente unha versión para vostede."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Incapaz de obter Win32_LogicalDisk; a consulta win32com non devolveu resultado algún"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Este botón comenza o proceso de creación da LiveUSB. Isto implica opcionalmente descargar unha versión (se no se seleccionou unha existente), extraer a ISO no dispositivo USB, crear unha distribución persistente, e instalar o xestor de arranque."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Non se pode atopar"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Esta é a chave USB na que vostede quere instalar o seu sistema Live. O dispositivo debe estar formateado cun sistema de ficheiros FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Versión descoñecida: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descargando %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Esta é a barra de progreso que indicaralle en qué parte do proceso de creación da LiveUSB está vostede"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Erro: Non se puido configurar a etiqueta ou obter o UUID do dispositivo. Non se pode continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Esta é a consola de estado, onde se volcan tódalas mensaxes."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalación completa! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Tentando continuar igualmente."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Atopada unidade USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Aviso: esta ferramenta ten que ser executada como administrador. Prema co botón dereito na icona e abra as Propiedades. Na lapela Compatibilidade, marque a caixa \"Executar este programa como administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Imposible cambiar a etiqueta de volume: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Imposible chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Imposible copiar %(infile)s en %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Incapaz de atopar unha unidade USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "O dispositivo \"%(pretty_name)s\" é demasiado pequeno para instalar Tails (precísanse alomenos %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Non foi posíbel atopar ningún dispositivo soportado"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Incapaz de atopar unha partición"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar dende ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Incapaz de obter Win32_LogicalDisk; a consulta win32com non devolveu resultado algún"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Imposible actualizar o dispositivo %(pretty_name)s porque non foi creado usando o Instalador de Tails. Debería en cambio usar %(action)s para actualizar Tails neste dispositivo."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Refrescando versións..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versións actualizadas!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalación completa!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Non foi posíbel montar o dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Non foi posíbel montar o dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Por favor confirme a súa selección de dispositivo"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Non foi posíbel borrar directorio de LiveOS previo: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Vai instalar Tails no dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Tódolos datos no dispositivo seleccionado perderanse. Continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Non foi posíbel borrar fichero de LiveOS previo: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Vai actualizar Tails no dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Calquera volume persistente neste dispositivo permanecerá sen cambios Continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Completouse a descarga!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Produciuse un erro na descarga:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Pode tentar outra vez a reanudar a súa descarga"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "No foi posíble restablecer o MBR. Poida que vostede non teña o paquete `syslinux` instalado."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Non se pode ler o ficheiro seleccionado. Por favor amañe os seus permisos ou seleccione outro ficheiro."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Imposible usar o ficheiro seleccionado. Poida que teña máis sorte se move a súa ISO á raíz da súa unidade (p.ex. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Imposible escribir en %(device)s, saltando."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO descoñecida, saltando verificación checksum"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Excepción dbus descoñecida mentras tentaba montar o dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seleccionado"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistema de ficheiros descoñecido. Poida que necesite reformatear o seu dispositivo."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versión descoñecida: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Desmontando '%(udi)s' en '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Desmontando sistemas de ficheiros montados en '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dispositivo '%(device)s' non soportado, por favor informe dun bug."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistema de ficheiros non soportado: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de ficheiros non soportado: %s\nPor favor faga unha copia de seguridade e formatee a súa chave USB cun sistema de ficheiros FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Actualizando as propiedades da partición de sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Actualizar\nclonando"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalar Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Actualizar\ndende ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usar un sistema Live ISO existente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificando checksum MD5 da ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificando checksum SHA1 da imaxe LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificando checksum SHA256 da imaxe LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificando sistema de ficheiros..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Atención: Ao crear unha nova distribución persistente borrará a existente."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Aviso: esta ferramenta ten que ser executada como administrador. Prema co botón dereito na icona e abra as Propiedades. Na lapela Compatibilidade, marque a caixa \"Executar este programa como administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Escribín no dispositivo a %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Vai instalar Tails no dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Tódolos datos no dispositivo seleccionado perderanse. Continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Vai actualizar Tails no dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Calquera volume persistente neste dispositivo permanecerá sen cambios Continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Está vostede usando unha versión antiga de syslinux-extlinux que non soporta sistemas de ficheiros ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Pode tentar outra vez a reanudar a súa descarga"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Debe executar esta aplicación como root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ou"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/gu/gu.po b/gu/gu.po
index d54a5c5..aee4770 100644
--- a/gu/gu.po
+++ b/gu/gu.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Gujarati (http://www.transifex.com/otf/torproject/language/gu/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: gu\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/gu_IN/gu_IN.po b/gu_IN/gu_IN.po
index 4acfc7c..5134623 100644
--- a/gu_IN/gu_IN.po
+++ b/gu_IN/gu_IN.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Gujarati (India) (http://www.transifex.com/otf/torproject/language/gu_IN/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: gu_IN\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/gun/gun.po b/gun/gun.po
index f78591b..c1894f0 100644
--- a/gun/gun.po
+++ b/gun/gun.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Gun (http://www.transifex.com/otf/torproject/language/gun/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: gun\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ha/ha.po b/ha/ha.po
index ec23189..4c3e69e 100644
--- a/ha/ha.po
+++ b/ha/ha.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Hausa (http://www.transifex.com/otf/torproject/language/ha/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ha\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/he/he.po b/he/he.po
index 4879036..98f76b2 100644
--- a/he/he.po
+++ b/he/he.po
@@ -15,9 +15,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Yuval\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Hebrew (http://www.transifex.com/otf/torproject/language/he/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -25,591 +25,551 @@ msgstr ""
"Language: he\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"שבט והתקן\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "אתה חייב להריץ את היישום הזה כמנהל."
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"התקן מקובץ ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "מחלץ את תמונת מערכת ההפעלה החדשה להתקן היעד..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "מתקין %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "כותב למכשיר ב %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s נבחר"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "מגדיר את קובץ אתחול OLPC.."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "היתה בעיה בביצוע הפקודה הבאה: `%(command)s`. רישום טעות יותר מפורט נכתב ל '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "מאשר בדיקת שלמות SHA1 של תמונת LiveCD"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s כבר ניתן לאתחול."
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "מאשר בדיקת שלמות SHA256 של תמונת LiveCD"
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "שגיאה: ה־SHA1 של התקליטור החי שלך שגוי. ניתן להריץ תכנית זו עם הארגומנט --noverify כדי לעקוף בדיקת אימות זו."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO לא ידוע, מדלג על אישור בדיקת שלמות"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "אין די שטח פנוי על ההתקן.\n%dMB ISO + %dMB overlay > %dMB שטח פנוי"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "יוצר %sMB זכרון תמידי"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "דפדף"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "לא יכול להעתיק %(infile)s ל %(outfile)s : %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "באמצעות הקצאת נפח נוסף מכונן ה-USB שלך עבור המחיצה הקבועה, באמצעותה תוכל לאחסן מידע ולבצע התאמות קבועות למערכת ההפעלה החיה שלך. בלעדיה, לא תוכל לשמור כל מידע שיישאר לאחר האתחול."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "מסיר מערכת הפעלה קיימת,"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "חישוב SHA1 של %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "אי אפשר לשנות הרשאות %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "לא יכול למצוא"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "אי אפשר להסיר קובץ ממערכת ההפעלה הקודמת: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "אי אפשר להסיר תיקייה ממערכת ההפעלה הקודמת: %(message)s"
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "לא ניתן למצוא את ההתקן %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "יוצר %sMB זכרון תמידי"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "אי אפשר לכתוב על %(device)s, מדלג"
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "ההתקן אינו טעון, כך שאין באפשרותנו לקבוע מהו נפח הכונן הפנוי."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "חלק ממחיצות התקן היעד %(device)s טעונות כרגע. הן תיפרקנה בטרם יחל תהליך ההתקנה."
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "הורדת %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "מערכת קבצים לא ידועה. המכשיר שלך צריך פרמוט מחדש."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ההורדה הושלמה!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "מערכת הקבצים אינה נתמכת: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "הורדה נכשלה:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "מוריד %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "אי אפשר לצרף מכשיר: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "הכונן הוא loopback, מדלג על אתחול MBR"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "לא נמצאו נקודות חיבור"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "מזין את unmount_device בעבור \"%(device)s\""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "מכשיר הגורם לטעות"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "שגיאה לא ניתן להגדיר את התווית או לקבל את ה־UUID של ההתקן שלך. לא ניתן להמשיך."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "שגיאה: ה־SHA1 של התקליטור החי שלך שגוי. ניתן להריץ תכנית זו עם הארגומנט --noverify כדי לעקוף בדיקת אימות זו."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "מחלץ את תמונת מערכת ההפעלה החדשה להתקן היעד..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "פורק את כל מערכות הקבצים הטעונות על \"%(device)s\""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "יצירת %(device)s כ FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "פורק \"%(udi)s\" מ-\"%(device)s\""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr " בדיקת שלמות של ISO MD5 עברה"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "צירוף %s קיים אחרי שעושים אי צירוף"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr " אישור בדיקת שלמות של ISO MD5 נכשל"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "מגדיר מחיצות על התקן %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "אם לא תבחר בקובץ ISO קיים של מערכת הפעלה חיה, תיבחר עבורך הגירסה המסומנת."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "מעדכן מאפיינים של מחיצת המערכת %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "מכשיר '%(device)s' לא נתמך, נא לדווח את הבאג."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "התקן Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "מנסה להמשיך בכל זאת."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "התקנה הושלמה!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "מערכת הקבצים מאומתת..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "ההתקנה הושלמה! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ההתקנה הושלמה. לחץ OK כדי ללסגור את התוכנית."
+msgid "Unable to change volume label: %(message)s"
+msgstr "אי אפשר לשנות תוית עוצמת קול: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "מתקין bootloader..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "אי אפשר לשדרג את ההתקן %(pretty_name)s משום שהוא לא נוצר באמצעות תוכנת ההתקנה של Tails. במקום זאת, עליך להשתמש ב-%(action)s על מנת לשדרג את Tails על התקן זה."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "יצירת ה־USB החי נכשלה!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "ודא שפרסת את כל הקובץ הדחוס לפני הרצת התכנית."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "נא לוודא שכונן ה־USB שלך מחובר ושלאחר פרמוט מערכת הקבצים שלו היא מסוג FAT"
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "צירוף %s קיים אחרי שעושים אי צירוף"
+msgid "Removing %(file)s"
+msgstr "הסרת קובץ %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "אין מקום פנוי במכשיר %(device)s"
+msgid "%s already bootable"
+msgstr "%s כבר ניתן לאתחול."
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "לא נמצאו נקודות חיבור"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "אי אפשר למצוא חלוקה"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "אין די שטח פנוי על ההתקן.\n%dMB ISO + %dMB overlay > %dMB שטח פנוי"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "מחיצה מהסוג FAT16; גודל הגבלת כיסוי ל2G"
+msgid "Formatting %(device)s as FAT32"
+msgstr "יצירת %(device)s כ FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "מחיצה בפורמט FAT32; גודל קובץ מירבי מוגבל ל-4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "מגדיר מחיצות על התקן %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "אחסון תמידי"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "אחסון תמידי (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "אנא וודא את בחירת ההתקן שלך"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "מרענן מהדורות..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "מהדורות עודכנו!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "הסרת קובץ %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "מסיר מערכת הפעלה קיימת,"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "הגדרה מחדש של Master Boot Record של %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "בחירת ISO חי"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "מגדיר את קובץ אתחול OLPC.."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "הכונן הוא loopback, מדלג על אתחול MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "חלק ממחיצות התקן היעד %(device)s טעונות כרגע. הן תיפרקנה בטרם יחל תהליך ההתקנה."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "סוג המקור לא תומך באישור של בדיקת שלמות ISO MD5 , דלג "
+msgid "Calculating the SHA1 of %s"
+msgstr "חישוב SHA1 של %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "מסנכרן נתונים על הדיסק.."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "מכשיר היעד"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "מכשיר הגורם לטעות"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "ההתקן \"%(pretty_name)s\" קטן מכדי להתקין עליו את Tails (לפחות %(size)s GB דרושים)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "לא נמצא התקן נתמך"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "הקובץ שנבחר איננו קריא. אנא תקן את הרשאותיו או בחר בקובץ אחר."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "נא לוודא שכונן ה־USB שלך מחובר ושלאחר פרמוט מערכת הקבצים שלו היא מסוג FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "היתה בעיה בביצוע הפקודה הבאה: `%(command)s`. רישום טעות יותר מפורט נכתב ל '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "מערכת קבצים בלתי נתמכת: %s\nנא לגבות את ולפרמט את כונן ה־USB שלך למערכת הקבצים FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "לחצן זה מאפשר לך לעיין ולבחור קובץ ISO של מערכת הפעלה חיה שכבר הורדת מבעוד מועד. אם לא תבחר בקובץ מסוים, אחת המהדורות של Tails תיבחר עבורך ותורד אוטומטית."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "אי אפשר לקבל Win32_LogicalDisk. שאילתת win32com לא מחזירה תוצאות."
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "לחצן זה יפתח בתהליך יצירת התקן ה-USB החי. הדבר כולל אפשרות להוריד מהדורה (אם לא נבחרה אחת), לחלץ את קובץ ה-ISO להתקן USB, ליצור מחיצה קבועה ולהתקין bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "לא יכול למצוא"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "זהו התקן ה-USB שברצונך להתקין עליו מערכת הפעלה חיה. התקן זה חייב להיות מפורמט למערכת קבצים מסוג FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "שחרור לא ידוע: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "מוריד %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "זהו סמן ההתקדמות שימחיש עד כמה רחוק הינך נמצא בתהליך יצירת כונן ה-USB החי."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "שגיאה לא ניתן להגדיר את התווית או לקבל את ה־UUID של ההתקן שלך. לא ניתן להמשיך."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "זוהי קונסולת המצב, בה מתפרסמות כל הודעות המערכת."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "ההתקנה הושלמה! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "מנסה להמשיך בכל זאת."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "נמצא התקן USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "אזהרה: כלי זה צריך להפעיל בAdministrator. כדי לעשות זאת, לחץ לחיצה ימנית על הסמל ולפתוח את המאפיינים. בכרטיסיית התאימות, סמן את התיבה הפעל תכנית זו בAdministrator\"."
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
+
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "אי אפשר לשנות תוית עוצמת קול: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "אי אפשר לשנות הרשאות %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "לא יכול להעתיק %(infile)s ל %(outfile)s : %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "לא ניתן למצוא כונן USB כלשהו"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "ההתקן \"%(pretty_name)s\" קטן מכדי להתקין עליו את Tails (לפחות %(size)s GB דרושים)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "לא נמצא התקן נתמך"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "אי אפשר למצוא חלוקה"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"התקן מקובץ ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "אי אפשר לקבל Win32_LogicalDisk. שאילתת win32com לא מחזירה תוצאות."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "אי אפשר לשדרג את ההתקן %(pretty_name)s משום שהוא לא נוצר באמצעות תוכנת ההתקנה של Tails. במקום זאת, עליך להשתמש ב-%(action)s על מנת לשדרג את Tails על התקן זה."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "מרענן מהדורות..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "מהדורות עודכנו!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "התקנה הושלמה!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "אי אפשר לצרף את המכשיר."
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "אי אפשר לצרף מכשיר: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "אנא וודא את בחירת ההתקן שלך"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "אי אפשר להסיר תיקייה ממערכת ההפעלה הקודמת: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "אתה הולך להתקין את Tails %(size)s %(vendor)s %(model)s במכשיר (%(device)s). כל הנתונים שבהתקן שנבחר ייאבדו. להמשיך?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "אי אפשר להסיר קובץ ממערכת ההפעלה הקודמת: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "אתה הולך לשדרג את Tails על התקן (%(device)s) %(parent_size)s %(vendor)s %(model)s. כל מחיצה קבועה על התקן זה לא תשונה. להמשיך?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ההורדה הושלמה!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "הורדה נכשלה:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "ניתן לנסות שוב כדי להמשיך את ההורדה שלך"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "אי אפשר להגדיר מחדש MBR. יכול להיות שאין לך חבילת `syslinux` מותקנת"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "הקובץ שנבחר איננו קריא. אנא תקן את הרשאותיו או בחר בקובץ אחר."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "אי אפשר להשתמש בקובץ הנבחר. יכול להיות שתצליח אם תעביר את ה ISO \nשלך למחיצה הראשית של הכונן (למשל, \\ :C)."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "אי אפשר לכתוב על %(device)s, מדלג"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO לא ידוע, מדלג על אישור בדיקת שלמות"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "טעות dbus לא ידועה כשמנסים לצרף מכשיר: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s נבחר"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "מערכת קבצים לא ידועה. המכשיר שלך צריך פרמוט מחדש."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "שחרור לא ידוע: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "פורק \"%(udi)s\" מ-\"%(device)s\""
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "פורק את כל מערכות הקבצים הטעונות על \"%(device)s\""
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "מכשיר '%(device)s' לא נתמך, נא לדווח את הבאג."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "מערכת הקבצים אינה נתמכת: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "מערכת קבצים בלתי נתמכת: %s\nנא לגבות את ולפרמט את כונן ה־USB שלך למערכת הקבצים FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "מעדכן מאפיינים של מחיצת המערכת %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "התקן Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "להשתמש ב-Live system ISO הקיימת"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "מאשר בדיקת שלמות ISO MD5 "
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "מאשר בדיקת שלמות SHA1 של תמונת LiveCD"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "מאשר בדיקת שלמות SHA256 של תמונת LiveCD"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "מערכת הקבצים מאומתת..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "אזהרה: יצירת שכבת קבע חדשה תמחק את הקיימת."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "אזהרה: כלי זה צריך להפעיל בAdministrator. כדי לעשות זאת, לחץ לחיצה ימנית על הסמל ולפתוח את המאפיינים. בכרטיסיית התאימות, סמן את התיבה הפעל תכנית זו בAdministrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "כותב למכשיר ב %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "אתה הולך להתקין את Tails %(size)s %(vendor)s %(model)s במכשיר (%(device)s). כל הנתונים שבהתקן שנבחר ייאבדו. להמשיך?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "אתה הולך לשדרג את Tails על התקן (%(device)s) %(parent_size)s %(vendor)s %(model)s. כל מחיצה קבועה על התקן זה לא תשונה. להמשיך?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "אתה משתמש בגרסה ישנה של syslinux-extlinux שלא תומכת במערכת קבצים ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "ניתן לנסות שוב כדי להמשיך את ההורדה שלך"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "אתה חייב להריץ את היישום הזה כמנהל."
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "או"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/hi/hi.po b/hi/hi.po
index 60fe3aa..89be8c4 100644
--- a/hi/hi.po
+++ b/hi/hi.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Hindi (http://www.transifex.com/otf/torproject/language/hi/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: hi\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "ब्राउज़"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/hr/hr.po b/hr/hr.po
index ce80c8d..3d8be1b 100644
--- a/hr/hr.po
+++ b/hr/hr.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Croatian (http://www.transifex.com/otf/torproject/language/hr/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: hr\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s odabrano"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalacija završena! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalacija je završena. Pritisni OK za zatvaranje ovog programa."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr ""
-
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
+#, python-format
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
-#, python-format
-msgid "Removing %(file)s"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+msgid "Installation complete! (%s)"
+msgstr "Instalacija završena! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s odabrano"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/hr_HR/hr_HR.po b/hr_HR/hr_HR.po
index 8e19370..f5e6146 100644
--- a/hr_HR/hr_HR.po
+++ b/hr_HR/hr_HR.po
@@ -4,7 +4,7 @@
#
# Translators:
# Ana B, 2013-2014
-# Igor <lyricaltumor at gmail.com>, 2016
+# Igor <lyricaltumor at gmail.com>, 2016-2017
# cisterna, 2013
# leonardo_cro <leonardo.miodrag at gmail.com>, 2014
# Igor <lyricaltumor at gmail.com>, 2014-2015
@@ -13,8 +13,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-09-09 12:55+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-05 09:49+0000\n"
"Last-Translator: Igor <lyricaltumor at gmail.com>\n"
"Language-Team: Croatian (Croatia) (http://www.transifex.com/otf/torproject/language/hr_HR/)\n"
"MIME-Version: 1.0\n"
@@ -23,591 +23,551 @@ msgstr ""
"Language: hr_HR\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Kloniraj & instaliraj\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Morate pokrenuti ovu aplikaciju kao root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instaliraj sa ISO-a\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Raspakiravam živu sliku na ciljni uređaj…"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s instalacijski program"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Zapisao na uređaj brzinom od %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s odabrano"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Postavljam OLPC pokretačku datoteku…"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Pojavio se problem prilikom izvođenja sljedeće naredbe: '%(command)s'.\nPodrobniji zapisnik o grešci je zapisan u '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Provjeravam SHA1 kontrolni broj slike ŽivogCD-a..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s se već može pokrenuti"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Provjeravam SHA256 kontrolni broj slike ŽivogCD-a..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Trebate pomoć? Pročitajte <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentaciju</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalirajte Tails na drugi USB kopirajući Tails sustav koji trenutno koristite...</li>\n\n<li>USB na koji ćete instalirati će biti formatiran i svi podatci će biti izgubljeni.</li>\n\n<li>Enkriptirana trajna pohrana Tails USB-a koju trenutno koristite neće biti kopirana.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Nadogradite drugi Tails USB na istu verziju Tailsa koju trenutno koristite.</li>\n\n<li>Enkriptirana trajna pohrana Tails USB-a koji nadograđujete će biti sačuvana.</li>\n\n<li>Enkriptirana trajna pohrana Tails USB-a koji trenutno koristite neće biti kopirana.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Nadogradite drugi Tails USB na verziju ISO slike.</li>\n\n<li>Enkriptirana trajna pohrana Tails USB-a koji nadograđujete će biti sačuvana.</li>\n\n<li>Enkriptirana trajna pohrana Tails USB-a koji trenutno koristite neće biti kopirana.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Pregledaj"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Dodjeljivanjem dodatnoga prostora za trajni preklop na Vašem USB-u, moći ćete pohraniti podatke i napraviti trajne izmjene Vašeg živog operacijskoga sustava. Bez toga nećete moći pohraniti podatke koji će ostati nakon ponovnog pokretanja."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Izračunavam SHA1 %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Greška: SHA1 Vašeg živog CD‑a je neispravan. Možete pokrenuti ovaj program s argumentom --noverify kako bi zaobišli ovu provjeru valjanosti."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ne mogu pronaći"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nepoznat ISO; preskačem provjeru kontrolnog zbroja"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Ne mogu pronaći uređaj %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nedovoljno slobodnog prostora na uređaju.\n%dMB ISO + %dMB preklop > %dMB slobodan prostor"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Stvaram %s MB trajnog preklopa"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Uređaj još nije postavljen pa ne možemo odrediti količinu slobodnog prostora."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Preuzmi %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Preuzimanje dovršeno!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Ne mogu preslikati %(infile)s u %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Preuzimanje nije uspjelo:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Uklanjam postojeći Živi OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Preuzimam %s…"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Pogon se vrti u krug, preskačem resetiranje MBR‑a"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Ne mogu izmijeniti dozvole %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "unosim unmount_device za '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Greška ispitivanja uređaja"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Greška: Ne mogu postaviti oznaku ili doći do UUID‑a Vašeg uređaja. Ne mogu nastaviti."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Greška: SHA1 Vašeg živog CD‑a je neispravan. Možete pokrenuti ovaj program s argumentom --noverify kako bi zaobišli ovu provjeru valjanosti."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Raspakiravam živu sliku na ciljni uređaj…"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Ne mogu maknuti datoteku iz prethodnoga ŽivogOS‑a: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatiram %(device)s kao FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "MD5 kontrolni zbroj ISO-a je prošao"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Ne mogu maknuti direktorij iz prethodnoga ŽivogOS‑a: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verifikacija MD5 kontrolnog zbroja ISO-a neuspjela"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Ne mogu pronaći uređaj %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ako ne izaberete postojeći živi ISO, odabrano izdanje će biti skinuto za Vas."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Ne mogu pisati na %(device)s; preskačem."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instaliraj\nkloniranjem"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Neke particije odredišnoga uređaja %(device)s su postavljene. One će biti odmontirane prije započinjanja instalacije."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instaliraj Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Nepoznat sustav datoteka. Vaš uređaj možda treba ponovno formatirati."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalacija dovršena!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodržani sustav datoteka: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalacija dovršena! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Nepoznata GLib iznimka prilikom pokušaja postavljanja uređaja: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalacija je dovršena. Pritisnite OK kako bi zatvorili ovaj program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Ne mogu postaviti uređaj: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instaliram podizač…"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nisu pronađene točke postavljanja"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Nemoguće je nadograditi uređaj %(pretty_name)s jer nije stvoren korištenjem Tails instalera. Umjesto toga, trebali bi koristiti %(action)s kako bi nadogradili Tails na ovom uređaju."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Stvaranje ŽivogUSB‑a nije uspjelo!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "unosim unmount_device za '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Raspakirajte cijelu liveusb-creator ZIP datoteku prije pokretanja ovoga programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Skidam postavljeni sustav datoteka na '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pobrinite se da je Vaš USB uključen i formatiran u FAT formatu"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Skidam '%(udi)s' sa '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Pogon %s postoji i nakon odmontiranja"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Nema slobodnoga prostora na uređaju %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Particioniram uređaj %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nisu pronađene točke postavljanja"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Ažuriram svojstva particije sustava %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nedovoljno slobodnog prostora na uređaju.\n%dMB ISO + %dMB preklop > %dMB slobodan prostor"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepodržan uređaj '%(device)s', molimo Vas da prijavite problem."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Particija je FAT16; ograničavam veličinu preklopa na 2 GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Pokušavam svejedno nastaviti."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Particija je FAT32; ograničavam veličinu preklopa na 4 GB"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Provjeravam sustav datoteka..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Particioniram uređaj %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Ne mogu izmijeniti oznaku pogona: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trajna pohrana"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instaliram podizač…"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Trajna pohrana (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Nije uspjelo pronalaženje '%s' COM32 modula"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Molimo potvrdite Vaš izbor uređaja"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Uklanjam %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Osvježavam izdanja…"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s se već može pokrenuti"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Izdanja ažurirana!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Ne mogu naći particiju"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Uklanjam %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatiram %(device)s kao FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Uklanjam postojeći Živi OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Nije uspjelo pronalaženje syslinuxovog gptmbr.bin"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Čitanje izvučenog MBR sa %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Nije uspjelo čitanje izvučenog MBR-a sa %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Ponovno postavljam Master Boot Record %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Izaberite Živi ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Postavljam OLPC pokretačku datoteku…"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Pogon se vrti u krug, preskačem resetiranje MBR‑a"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Neke particije odredišnoga uređaja %(device)s su postavljene. One će biti odmontirane prije započinjanja instalacije."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Vrsta izvora ne podržava MD5 kontrolni međuzbroj ISO-a, preskačem"
+msgid "Calculating the SHA1 of %s"
+msgstr "Izračunavam SHA1 %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Usklađujem podatke na disku…"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Ciljni uređaj"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Greška ispitivanja uređaja"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Uređaj \"%(pretty_name)s\" je premalen da bi se na njega instalirao Tails (potrebno je najmanje %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Ne mogu naći niti jedan podržani uređaj"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Izabrana datoteka je nečitljiva. Molimo popravite njezine dozvole ili izaberite drugu datoteku."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pobrinite se da je Vaš USB uključen i formatiran u FAT formatu"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Pojavio se problem prilikom izvođenja sljedeće naredbe: '%(command)s'.\nPodrobniji zapisnik o grešci je zapisan u '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodržani sustav datoteka: %s\nMolimo Vas da stvorite sigurnosnu kopiju Vašeg USB-a te da ga formatirate koristeći FAT sustav datoteka."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ovaj gumb Vam omogućuje potragu za postojećim ISO‑om Živoga sustava kojeg ste predhodno skinuli. Ako ne izaberete niti jedan, izdanje će biti skinuto za Vas automatski."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Ne mogu dobiti Win32_LogicalDisk; win32com upit nije vratio nikakve rezultate"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ovaj gumb započinje postupak stvaranja Živog USB-a. To po potrebi uključuje skidanje jednoga izdanja (ako neko postojeće nije izabrano), raspakiravanje ISO‑a na USB uređaj, stvaranje trajnog preklopa i ugradnju podizača."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ne mogu pronaći"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Ovo je USB na koji želite ugraditi Vaš Živi sustav. Ovaj uređaj mora biti formatiran u FAT formatu."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Utvrdite da je cijela tails-installer zip datoteka raspakirana prije pokretanja ovog programa."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nepoznato izdanje: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Preuzimam %s…"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ovo je traka napretka koja će pokazivati koliko ste daleko u postupku stvaranja Živog USB‑a"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Greška: Ne mogu postaviti oznaku ili doći do UUID‑a Vašeg uređaja. Ne mogu nastaviti."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ovo je konzola stanja na koju se ispisuju sve poruke."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalacija dovršena! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Pokušavam svejedno nastaviti."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails instalacija nije uspjela!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Upozorenje: Ovaj alat morate pokrenuti kao Administrator. Da bi to napravili, kliknite desnom tipkom miša na ikonu i otvorite Svojstva. Pod karticom Kompatibilnost, označite kvačicom \"Pokreni ovaj program kao administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails instalacija"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB pogon pronađen"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Nije pronađen uređaj prikladan za instalaciju Tailsa"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Ne mogu izmijeniti oznaku pogona: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Molimo Vas da uključite USB ili SD karticu od najmanje %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Ne mogu izmijeniti dozvole %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Ne mogu preslikati %(infile)s u %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Ne mogu naći niti jedan USB pogon"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Uređaj \"%(pretty_name)s\" je premalen da bi se na njega instalirao Tails (potrebno je najmanje %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Ne mogu naći niti jedan podržani uređaj"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Instaliraj kloniranjem\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Ne mogu naći particiju"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instaliraj sa ISO-a\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Ne mogu dobiti Win32_LogicalDisk; win32com upit nije vratio nikakve rezultate"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Nemoguće je nadograditi uređaj %(pretty_name)s jer nije stvoren korištenjem Tails instalera. Umjesto toga, trebali bi koristiti %(action)s kako bi nadogradili Tails na ovom uređaju."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Došlo je do pogreške prilikom instaliranja Tailsa"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Osvježavam izdanja…"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Izdanja ažurirana!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalacija dovršena!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Instalacija je završena."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Ne mogu postaviti uređaj"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Ne mogu postaviti uređaj: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Molimo potvrdite Vaš izbor uređaja"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Ne mogu maknuti direktorij iz prethodnoga ŽivogOS‑a: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Instalirati ćete Tails na %(size)s %(vendor)s %(model)s uređaj (%(device)s). Svi podatci na odabranom uređaju će biti izgubljeni. Nastaviti?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Ne mogu maknuti datoteku iz prethodnoga ŽivogOS‑a: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Nadograditi ćete Tails na %(parent_size)s %(vendor)s %(model)s uređaj (%(device)s). Svi trajni pogoni na ovom uređaju će ostati nepromijenjeni. Nastaviti?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Preuzimanje dovršeno!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Preuzimanje nije uspjelo:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Možete pokušati ponovno za nastavak preuzimanja"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Ne mogu ponovno postaviti MBR. Možda nemate ugrađen paket 'syslinux'."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Izabrana datoteka je nečitljiva. Molimo popravite njezine dozvole ili izaberite drugu datoteku."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nisam u mogućnosti koristiti izabranu datoteku. Možda ćete imati više sreće ako premjestite ISO u korijen Vašega pogona (npr C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Ne mogu pisati na %(device)s; preskačem."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nepoznat ISO; preskačem provjeru kontrolnog zbroja"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Nepoznata dbus iznimka pri pokušaju montiranja uređaja: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s odabrano"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Nepoznat sustav datoteka. Vaš uređaj možda treba ponovno formatirati."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Nije uspjelo pronalaženje LiveOS na ISO-u"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nepoznato izdanje: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Nije uspjelo pogađanje uređaja temeljnog bloka: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Skidam '%(udi)s' sa '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Došlo je do problema pri izvršavanju '%s'.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Skidam postavljeni sustav datoteka na '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' ne postoji"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepodržan uređaj '%(device)s', molimo Vas da prijavite problem."
+msgid "'%s' is not a directory"
+msgstr "'%s' nije direktorij"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodržani sustav datoteka: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Preskakivanje '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodržani sustav datoteka: %s\nMolimo Vas da stvorite sigurnosnu kopiju Vašeg USB-a te da ga formatirate koristeći FAT sustav datoteka."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Došlo je do problema prilikom izvršavanja '%s'.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Ažuriram svojstva particije sustava %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Nije uspjelo otvaranje uređaja za pisanje."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Nadogradi\nkloniranjem"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Koristi ISO postojećeg Live sustava:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Odaberite distribuciju za preuzimanje:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Ciljani uređaj:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instaliraj Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Nadogradi\niz ISO-a"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Kako bi pokrenuli Tails instalaciju trebate ISO sliku koju možete preuzeti sa Tails stranice: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Koristi postojeći ISO Živog sustava"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Instalacija"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Provjera MD5 kontrolnog zbroja ISO-a"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Instalacija Tailsa na novi USB."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Provjeravam SHA1 kontrolni broj slike ŽivogCD-a..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• USB na koj instalirate će biti formatiran i svi podatci će biti izgubljeni."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Provjeravam SHA256 kontrolni broj slike ŽivogCD-a..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Nadogradnja"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Provjeravam sustav datoteka..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Nadogradnja Tails USB-a na verziju ISO slike."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Upozorenje: Stvaranje novog trajnog preklopa će izbirsati postojeći."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Enkriptirana trajna pohrana Tails USB-a kojeg nadograđujete je sačuvana."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Upozorenje: Ovaj alat morate pokrenuti kao Administrator. Da bi to napravili, kliknite desnom tipkom miša na ikonu i otvorite Svojstva. Pod karticom Kompatibilnost, označite kvačicom \"Pokreni ovaj program kao administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Trebate pomoć? Pročitajte <a href=\"https://tails.boum.org/doc/first_steps/installation/\">dokumentaciju</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Zapisao na uređaj brzinom od %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Instalacija kloniranjem"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Instalirati ćete Tails na %(size)s %(vendor)s %(model)s uređaj (%(device)s). Svi podatci na odabranom uređaju će biti izgubljeni. Nastaviti?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Instalacija Tailsa na drugi USB kopiranjem Tails sustava kojeg trenutno koristite."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Nadograditi ćete Tails na %(parent_size)s %(vendor)s %(model)s uređaj (%(device)s). Svi trajni pogoni na ovom uređaju će ostati nepromijenjeni. Nastaviti?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Enkriptirana trajna pohrana Tails USB-a kojeg trenutno koristite nije kopirana."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Nadogradnja kloniranjem"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Koristite staru syslinux-extlinux inačicu koja ne podržava ext4 sustav datoteka"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Nadogradite drugi Tails USB na istu verziju Tailsa koju trenutno koristite."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Možete pokušati ponovno za nastavak preuzimanja"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Nadogradnja sa ISO-a"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Morate pokrenuti ovu aplikaciju kao root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Nadogradite Tails USB na verziju ISO slike."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ili"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Trebate pomoć? Pročitajte <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">dokumentaciju</a>"
diff --git a/ht/ht.po b/ht/ht.po
index d99045a..2cbf519 100644
--- a/ht/ht.po
+++ b/ht/ht.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Haitian (Haitian Creole) (http://www.transifex.com/otf/torproject/language/ht/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ht\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/hu/hu.po b/hu/hu.po
index 7f83d95..ee5439c 100644
--- a/hu/hu.po
+++ b/hu/hu.po
@@ -17,9 +17,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-20 22:55+0000\n"
-"Last-Translator: Blackywantscookies\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Hungarian (http://www.transifex.com/otf/torproject/language/hu/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -27,591 +27,551 @@ msgstr ""
"Language: hu\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klónozás & Telepítés\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Az alkalmazást root-ként kell futtatnia"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Telepítés ISO-ból\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Élő képfájl kibontása a cél eszközre..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Telepítő"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Az eszközre %(speed)d MB/sec sebességel írtam."
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s kiválasztva"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Az OLPC boot fájl beállítása..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Hiba történt a következő parancs futtatásakor: `%(command)s`.\nRészletes hiba bejegyzés készül a '%(filename)s' fájlba."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "A LiveCD kép SHA1 összegének ellenőrzése…"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s már bootolható"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "A Live CD kép SHA256 összegének ellenőrzése…"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Segítségre van szükséged? Olvasd el a <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentációt</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Telepítsd fel a Tails-t egy másik USB-re úgy, hogy átmásolod azt a Tails rendszert amit jelenleg használsz..</li>\n\n\n<li>Az USB amire telepítesz az formázva van és minden adat el van vesze róla.</li>\n\n<li>A titkosított tartós tárhelye a Tails USB-nek amit jelenleg használsz nincs lemásolva.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Frissíts egy másik Tails USB-t ugyanazzal a Tails verzióval amit jelenleg használsz.</li>\n\n<li>A titkosított állandó tárhelye a Tails USB-nek amit frissítettél meg van őrizve.</li>\n\n<li>A titkosított állandó tárhelye a Tails USB-nek amit jelenleg használsz nincs lemásolva.</li>\n\n\n</ul>\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Frissíts egy másik Tails USB-t, hogy egy ISO kép verzió legyen.</li>\n\n<li>A titkosított állandó tárhelye a Tails USB-nek amit frissítettél meg van őrizve.</li>\n\n<li>A titkosított állandó tárhelye a Tails USB-nek amit jelenleg használsz nincs lemásolva.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Tallóz"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Extra terület lefoglalásával az USB pendrive-on az állandó tárhelyhez, képes leszel tárolni adatot és módosításokat végrehajtani a \"live\" operációs rendszeren. Enélkül nem tudsz adatokat menteni ami az újraindítás után is megmarad."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s SHA1 számítása "
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Hiba: Az élő CD kép SHA1 összegének ellenőrzése sikertelen. A programot a --noverify·argumentummal indítva mellőzheti ezt az ellenőrzést."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nem található"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Ismeretlen ISO, az ellenőrző főösszeg ellenőrzése kihagyva."
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "A(z) %s eszköz nem található"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nincs elég szabad hely az eszközön.\n%dMB ISO + %dMB átfedésben > %dMB szabad hely"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMb állandó tárhely létrehozása"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Az eszköz még nem csatolt, így nem meghatározható a szabad hely mennyisége."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s letöltése"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Letöltés kész!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nem tudom másolni a %(infile)s a %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "A letöltés nem sikerült:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "A meglévő Live operációs rendszer eltávolítása"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s letöltése…"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Az egység egy hurok, az MBR alaphelyzetbe állítás átugrása"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod végrehajtása sikertelen %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "A '%(device)s' eszközre unmount_device végrehajtása"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Hiba az eszköz próbájakor"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Hiba: A címkét nem lehet beállítani, vagy az eszköz UUID-jét lekérni. A folytatás nem lehetséges."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Hiba: Az élő CD kép SHA1 összegének ellenőrzése sikertelen. A programot a --noverify·argumentummal indítva mellőzheti ezt az ellenőrzést."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Élő képfájl kibontása a cél eszközre..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nem tudom eltávolítani a fájlt a LiveOS-ből: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "A %(device)s formázása FAT32-re"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Az ISO MD5 összeg ellenőrzése sikeres"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nem tudom eltvolítani a mappát a LiveOS-ből: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Az ISO MD5 összeg ellenőrzése sikertelen"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "A(z) %s eszköz nem található"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ha nem választasz ki egy létező \"live\" ISO-t akkor a kijelölt kiadás fog letöltődni."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nem tudok írni a(z) %(device)s, kihagyva."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Telepítés\nklónozással"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Néhány partíció a cél eszközön %(device)s csatolva vannak. Ezek le lesznek csatolva a telepítés megkezdése előtt."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails telepítése"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Ismeretlen fájlrendszer. Szükséges lehet az eszköz újraformázása."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Telepítés kész!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nem támogatott fájlrendszer: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Telepítés kész! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "A telepítés befejeződött. Kattintson az OK gombra a program bezárásához."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "%(message)s csatolása nem lehetséges"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Bootloader telepítése..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nem található csatolásai pont"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Lehetetlen frissíteni a'z' %(pretty_name)s eszközt, mert nem Tails telepítővel lett létrehozva. Ehelyett inkább használd a'z' %(action)s -t a Tails frissítéséhez ezen az eszközön."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Az élő USB létrehozása nem sikerült!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "A '%(device)s' eszközre unmount_device végrehajtása"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Győződjön meg róla, hogy kicspmagolta a teljes liveusb-creator zip fájlt mielőtt futtatja ezt a programot."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Csatolt fájlrendszerek lecsatolása '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Győződjön meg arról, hogy az USB eszközt bedugta és azon FAT fájlrendszer található"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Lecsatolás '%(udi)s' '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "%s csatolás létezik lecsatolás után"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Nincs szabad hely a %(device)s eszközön."
+msgid "Partitioning device %(device)s"
+msgstr "A %(device)s eszköz partícionálása"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nem található csatolásai pont"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "A rendszer partíciók tulajdonságának frissítése %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nincs elég szabad hely az eszközön.\n%dMB ISO + %dMB átfedésben > %dMB szabad hely"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nem támogatott eszköz '%(device)s', kérlek jelentsd a hibát."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "A partíció FAT16; Korlátozott a 2G feletti méret elérése."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Próbálja folytatni."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "A partíció FAT32; Az átfedés méretkorlátja 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Fájlrendszer ellenőrzése…"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "A %(device)s eszköz partícionálása"
+msgid "Unable to change volume label: %(message)s"
+msgstr "%(message)s meghajtó címkéje nem változtatható meg"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Állandó tároló"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Bootloader telepítése..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Állandó tárhely (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Erősítsd meg az eszköz választásod"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)s eltávolítása"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Kiadások frissítése..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s már bootolható"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Kiadások frissítve!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nem található partíció"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s eltávolítása"
+msgid "Formatting %(device)s as FAT32"
+msgstr "A %(device)s formázása FAT32-re"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "A meglévő Live operációs rendszer eltávolítása"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "A %s Master Boot Recordjának alaphelyzetbe állítása"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Válasszon élő ISO-t"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Az OLPC boot fájl beállítása..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Az egység egy hurok, az MBR alaphelyzetbe állítás átugrása"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Néhány partíció a cél eszközön %(device)s csatolva vannak. Ezek le lesznek csatolva a telepítés megkezdése előtt."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "A forrás típusa nem teszi lehetővé az ISO MD5 összeg ellenőrzését, kihagyva"
+msgid "Calculating the SHA1 of %s"
+msgstr "%s SHA1 számítása "
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Adat lemezre szinkronizálása..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Cél eszköz"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Hiba az eszköz próbájakor"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "A'z' \"%(pretty_name)s\" eszköz túl kicsi a Tails telepítéséhez (legalább %(size)s GB szükséges)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nem található támogatott eszköz"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "A kijelölt fájl nem olvasható. Változtasd meg a jogosultságokat vagy válassz egy másik fájlt."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Győződjön meg arról, hogy az USB eszközt bedugta és azon FAT fájlrendszer található"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Hiba történt a következő parancs futtatásakor: `%(command)s`.\nRészletes hiba bejegyzés készül a '%(filename)s' fájlba."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nem támogatott fájlrendszer: %s\nKérem mentse le az adatait, majd alakítson ki az USB eszközön FAT fájlrendszert."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ezzel a gombbal böngészni tudsz egy létező live rendszer ISO-t amit előzőleg letöltöttél. Ha nem válsztasz ki egyet sem akkor automatikusan letöltődik."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Sikertelen Win32_LogicalDisk; win32comlekérdezés eredmény nélkül tért vissza"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ezzel a gombbal tudod megkezdeni a Live USB létrehozását. Opcionálisan letöltődik egy kiadás (ha nem válsztottál egyet sem), az ISO kicsomagolása az USB eszközre, állandó tárhely létrehozása és a rendszerbetöltő telepítése."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nem található"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Ez az USB eszköz amire telepíteni akarod a live rendszert. Az eszközt FAT fájlrendszerrel kell formázni."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Ismeretlen kiadás: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s letöltése…"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ez mutatja a Live USB létrehozásának folyamatát"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Hiba: A címkét nem lehet beállítani, vagy az eszköz UUID-jét lekérni. A folytatás nem lehetséges."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ez a státusz konzol, ahol minden üzenet kiíródik."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Telepítés kész! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Próbálja folytatni."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Nem található USB meghajtó"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Figyelem: Ennek az eszköznek Administrator jogosultsággal kell indulnia. Ahhoz, hogy így futhasson kattintson jobb gombbal az ikonján, nyissa meg a Tulajdonságok ablakot, és a Kompatibilitás fülön jelölje a \"Futtatás rendszergazdaként\" opciót."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "%(message)s meghajtó címkéje nem változtatható meg"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod végrehajtása sikertelen %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nem tudom másolni a %(infile)s a %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nem található egyetlen USB meghajtó sem"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "A'z' \"%(pretty_name)s\" eszköz túl kicsi a Tails telepítéséhez (legalább %(size)s GB szükséges)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nem található támogatott eszköz"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nem található partíció"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Telepítés ISO-ból\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Sikertelen Win32_LogicalDisk; win32comlekérdezés eredmény nélkül tért vissza"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Lehetetlen frissíteni a'z' %(pretty_name)s eszközt, mert nem Tails telepítővel lett létrehozva. Ehelyett inkább használd a'z' %(action)s -t a Tails frissítéséhez ezen az eszközön."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Kiadások frissítése..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Kiadások frissítve!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Telepítés kész!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nem lehetséges az eszköz csatolása"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "%(message)s csatolása nem lehetséges"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Erősítsd meg az eszköz választásod"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nem tudom eltvolítani a mappát a LiveOS-ből: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Telepíteni fogod a Tails-t %(size)s %(vendor)s %(model)s eszköz (%(device)s). Minden adat a választott eszközön törlődni fog. Folytatod?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nem tudom eltávolítani a fájlt a LiveOS-ből: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Frissíteni fogod a Tails-t a %(parent_size)s %(vendor)s %(model)s eszközön (%(device)s). Minden jelenlevő persistent kötet az eszközön változatlan marad. Folytatod?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Letöltés kész!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "A letöltés nem sikerült:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Megpróbálhatja újra, így folytatva a letöltést"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nem lehetséges az MBR alaphelyzetbe állítása. Lehetséges, hogy nincs a `syslinux` csomag telepítve."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "A kijelölt fájl nem olvasható. Változtasd meg a jogosultságokat vagy válassz egy másik fájlt."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nem tudom használni a kiválasztott fájlt. Szerrencsésebb lenne aaz ISO fájlt a meghatjó gyökerébe mozgatni (pl: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nem tudok írni a(z) %(device)s, kihagyva."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Ismeretlen ISO, az ellenőrző főösszeg ellenőrzése kihagyva."
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Ismeretlen dbus kivétel eszköz csatlakoztatásakor: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s kiválasztva"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Ismeretlen fájlrendszer. Szükséges lehet az eszköz újraformázása."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Ismeretlen kiadás: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Lecsatolás '%(udi)s' '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Csatolt fájlrendszerek lecsatolása '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nem támogatott eszköz '%(device)s', kérlek jelentsd a hibát."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nem támogatott fájlrendszer: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nem támogatott fájlrendszer: %s\nKérem mentse le az adatait, majd alakítson ki az USB eszközön FAT fájlrendszert."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "A rendszer partíciók tulajdonságának frissítése %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Frissítés\nklónozással"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails telepítése"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Frissítés\nISO-ból"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Meglévő Live rendszer ISO használata"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Az ISO MD5 összeg ellenőrzése"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "A LiveCD kép SHA1 összegének ellenőrzése…"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "A Live CD kép SHA256 összegének ellenőrzése…"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Fájlrendszer ellenőrzése…"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Figyelmeztetés: Új állandó tárhely létrehozása törli a meglévőt."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Figyelem: Ennek az eszköznek Administrator jogosultsággal kell indulnia. Ahhoz, hogy így futhasson kattintson jobb gombbal az ikonján, nyissa meg a Tulajdonságok ablakot, és a Kompatibilitás fülön jelölje a \"Futtatás rendszergazdaként\" opciót."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Az eszközre %(speed)d MB/sec sebességel írtam."
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Telepíteni fogod a Tails-t %(size)s %(vendor)s %(model)s eszköz (%(device)s). Minden adat a választott eszközön törlődni fog. Folytatod?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Frissíteni fogod a Tails-t a %(parent_size)s %(vendor)s %(model)s eszközön (%(device)s). Minden jelenlevő persistent kötet az eszközön változatlan marad. Folytatod?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "A syslinux-extlinux réfgi verzióját használod, ami nem támogatja az ext4 fájlrendszert"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Megpróbálhatja újra, így folytatva a letöltést"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Az alkalmazást root-ként kell futtatnia"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "vagy"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/hy/hy.po b/hy/hy.po
index c2661ec..716c223 100644
--- a/hy/hy.po
+++ b/hy/hy.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Armenian (http://www.transifex.com/otf/torproject/language/hy/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: hy\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ia/ia.po b/ia/ia.po
index 0157ef2..06dc00e 100644
--- a/ia/ia.po
+++ b/ia/ia.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Interlingua (http://www.transifex.com/otf/torproject/language/ia/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ia\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navigar"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/id/id.po b/id/id.po
index 5de909c..87b96b2 100644
--- a/id/id.po
+++ b/id/id.po
@@ -3,22 +3,22 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# adhisuryo <adhisuryo at gmail.com>, 2015
+# adhisuryo i <adhisuryo at gmail.com>, 2015
# Budiman Jojo <budimanjojo at gmail.com>, 2014
# cholif yulian <cholifyulian123 at gmail.com>, 2015
# Dichi Al Faridi <dichi at alfaridi.info>, 2010
# Fathan Imanudin <night.ataraxia at gmail.com>, 2014
# Heru Hermawan, 2015
# Mark Hiro <akmalgaul at gmail.com>, 2015
-# ba dwi <slamet.badwi at gmail.com>, 2014
-# zk <zamani.karmana at gmail.com>, 2015
+# Badwi <slamet.badwi at gmail.com>, 2014
+# zk, 2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: adhisuryo <adhisuryo at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Indonesian (http://www.transifex.com/otf/torproject/language/id/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -26,591 +26,551 @@ msgstr ""
"Language: id\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Duplikasi & Pasang\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Anda harus menjalankan aplikasi ini sebagai root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Pasang dari ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extract image yang ada /Live ke Device target"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Pemasang %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Telah tertulis ke device pada %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s terpilih"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Seting boot file OLPC"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr " ada beberapa masalah dalam eksekusi perintah berikut : %(command)s enter.\nLebih detail log error telah ditulis ke '%(filename)s'"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Mencocokkan checksum SHA1 gambar LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s sudah bisa diboot"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Mencocokkan checksum SHA256 gambar LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Butuh bantuan? Baca <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentasi</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Install Tails ke dalam USB dengan menyalin sistem Tails yang sedang kamu pakai..</li>\n\n<li>USB dimana kamu akan menginstall telah diformat dan seluruh data telah lenyap</li>\n\n<li>\"Persistent Storage Terenkripsi dari USB-Tails yang sedang kamu gunakan tidak tersalin.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Mutakhirkan USB-Tails lain ke versi yang sama dengan Tails yang sedang kamu gunakan.</li>\n\n<li>Persistent Storage Terenkripsi dari USB-Tails yang kamu mutakhirkan telah terjaga.</li>\n\n<li>Persistent Storage Terenkripsi dari USB-Tails yang sedang kamu gunakan tidak tersalin.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Mutakhirkan USB-Tails lain ke versi yang sama dengan Tails dalam ISO-image.</li>\n\n<li>Persistent Storage Terenkripsi dari USB-Tails yang kamu mutakhirkan telah terjaga.</li>\n\n<li>Persistent Storage Terenkripsi dari USB-Tails yang sedang kamu gunakan tidak tersalin.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Ramban"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Dengan mengalokasikan ruang ekstra pada perangkat USB Anda untuk simpanan persistensi, Anda bisa menyimpan data dan membuat modifikasi permanen pada sistem operasi Anda. Tanpa fitur tersebut, data Anda tidak akan tersimpan setelah memulai ulang."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Menghitung SHA1 dari %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Kesalahan: SHA1 dari Live CD Anda tidak valid. Anda dapat menjalankan program ini dengan opsi argumen -noverify untuk memotong cek verifikasi ini."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Tidak bisa menemukan"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO yg tak dikenal, melewatkan pencocokan checksum"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Tidak bisa menemukan perangkat %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ruang kosong/yang tersedia tidak mencukupi pada perangkat enter %dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Membuat %sMB penyimpanan persisten"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Perangkat belum terkait, sehingga kami tidak bisa memperkirakan sisa ruang kosong yang ada."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Mengunduh %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Unduhan komplet!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Tidak bisa menyalin %(infile)s ke %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Pengunduhan gagal:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Menghapus OS Live yang telah ada"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Mengunduh %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Perangkat balikan (loopback), melewatkan mengatur ulang MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Unable to chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Enter tidak dipasang_device untuk'%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error probing device"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Kesalahan: Tidak dapat mengatur label atau memperoleh UUID perangkat Anda. Tidak dapat melanjutkan."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Kesalahan: SHA1 dari Live CD Anda tidak valid. Anda dapat menjalankan program ini dengan opsi argumen -noverify untuk memotong cek verifikasi ini."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extract image yang ada /Live ke Device target"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Tidak bisa meremove file dari LiveOS sebelumnya: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Memformat %(device)s sebagai FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Pemeriksaan MD5 ISO terlewati"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Tidak bisa meremove direktori dari LiveOS sebelumnya: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Pencocokan MD5 ISO gagal"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Tidak bisa menemukan perangkat %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Jika anda tidak memilih Live iso yang ada, release terpilih akan do unduh untuk anda"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Tidak bisa menulis pada %(device)s, lewati"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instal\ndengan cara klon"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Beberapa partisi dari perangkat target %(device)s terpasang. mereka akan tidak terpasang sebelum start proses instalasi"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Pasang Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistem file yang tidak dikenal. perangkat anda mesti di format"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Pemasangan sudah tuntas!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Filesystem yang tidak didukung: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Pemasangan sudah tuntas! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Pemasangan sudah tuntas! Tekan OK untuk menutup program ini."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Tidak dapat/gagal ke mount device: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Memasang bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Tidak ada titik kait"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Upgrade untuk device ini tida memungkinkan %(pretty_name)s karena tidak di-install menggunakan Tails Installer. Coba anda gunakan %(action)s untuk upgrade Tails di device ini."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Penciptaan LiveUSB gagal!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Enter tidak dipasang_device untuk'%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Pastikan untuk mengekstrak seluruh berkas zip liveusb-creator sebelum menjalankan program ini."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "tidak terpasangnya /unmounting mounted filessytem pada '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pastikan kunci USB Anda terhubung dan diformat dengan sistem berkas FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Tidak terpasang '%(udi)s' pada '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount%s ada setelah tidak terpasang"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Device %(device)s tidak punya tempat kosong"
+msgid "Partitioning device %(device)s"
+msgstr "Mempartisi device %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Tidak ada titik kait"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Update properties dari partisi sistem %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ruang kosong/yang tersedia tidak mencukupi pada perangkat enter %dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Perangkat yang tidak didukung '%(device)s', silakan laporkan sebagai bug"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partisi adalah FAT16; Membatasi ukuran lembaran ke 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Mencoba untuk melanjutkan"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partisi adalah FAT32; Membatasi ukuran lembaran ke 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Memeriksa filesystem..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Mempartisi device %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Tidak bisa merubah volume label %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Penyimpanan Menetap"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Memasang bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Penyimpanan Menetap (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Mohon mengkonfirmasi perangkat pilihan anda"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Menghapus %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Menyegarkan rilis..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s sudah bisa diboot"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Rilis telah diperbarui!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Tidak bisa menemukan partisi"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Menghapus %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Memformat %(device)s sebagai FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Menghapus OS Live yang telah ada"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Mengatur ulang Master Boot Record dari %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Pilih Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Seting boot file OLPC"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Perangkat balikan (loopback), melewatkan mengatur ulang MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Beberapa partisi dari perangkat target %(device)s terpasang. mereka akan tidak terpasang sebelum start proses instalasi"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tipe source tidak mendukung verifikasi dari ISO MD5 cheksum, skipping/lewati"
+msgid "Calculating the SHA1 of %s"
+msgstr "Menghitung SHA1 dari %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sinkronisasi data pada disk"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Perangkat target"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error probing device"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Device \"%(pretty_name)s\" terlalu kecil untuk menginstall Tails (minimal perlu %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Tidak bisa menemukan beberapa perangkat pendukung"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "File terpilih tidak bisa dibaca. silakan perbaharui izinnya atau pilih file lain"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pastikan kunci USB Anda terhubung dan diformat dengan sistem berkas FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr " ada beberapa masalah dalam eksekusi perintah berikut : %(command)s enter.\nLebih detail log error telah ditulis ke '%(filename)s'"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Filesystem yang tidak didukung: %s Silakan backup dan format USB Anda dengan filesystem FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Tombol ini membolehkan anda untuk browse Live system yang ada sekarang yang mana di download sebelumnya. jika anda tidak memilih salah satu, release akan ter-download untuk anda secara otomatis"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Gagal untuk meraih Win32_LogicalDisk; win32com Permintaan tidak kembali menghasilkan apapun"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Tombol ini akan memulai Proses kreasi LiveUSB. Entail ini secara optional mendownload release (Jika tidak ada satupun yang dipilih), Extract ISO ke perangkat USB, membuat persistent overlay, dan instal bootloader"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Tidak bisa menemukan"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Ini adalah stick USB yang anda ingin instal Sistem Live anda on. Perangkat ini harus diformat dengan Filesystem FAT"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Rilis tidak diketahui: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Mengunduh %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "ini adalah bar progres yang menunjukkan seberapa lama di dalam proses LiveUSB creation anda"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Kesalahan: Tidak dapat mengatur label atau memperoleh UUID perangkat Anda. Tidak dapat melanjutkan."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ini adalah konsol status, dimana semua pesan tertulis ke"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Pemasangan sudah tuntas! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Mencoba untuk melanjutkan"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Drive USB ditemukan"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Peringatan: Tool ini harus dijalankan sebagai administrator. Untuk melakukan ini , klik kanan pada ikon dan buka Properties .Dibawah Tab Compatibility, cek box \"Jalankan program ini sebagai adminisrator\""
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Tidak bisa merubah volume label %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Unable to chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Tidak bisa menyalin %(infile)s ke %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Gagal menemukan perangkat USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Device \"%(pretty_name)s\" terlalu kecil untuk menginstall Tails (minimal perlu %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Tidak bisa menemukan beberapa perangkat pendukung"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Tidak bisa menemukan partisi"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Pasang dari ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Gagal untuk meraih Win32_LogicalDisk; win32com Permintaan tidak kembali menghasilkan apapun"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Upgrade untuk device ini tida memungkinkan %(pretty_name)s karena tidak di-install menggunakan Tails Installer. Coba anda gunakan %(action)s untuk upgrade Tails di device ini."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Menyegarkan rilis..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Rilis telah diperbarui!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Pemasangan sudah tuntas!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Gagal memuat perangkat"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Tidak dapat/gagal ke mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Mohon mengkonfirmasi perangkat pilihan anda"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Tidak bisa meremove direktori dari LiveOS sebelumnya: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Anda akan instal Tails pada %(size)s %(vendor)s %(model)s device (%(device)s). Semua data pada perangkat terpilih akan hilang . Lanjutkan?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Tidak bisa meremove file dari LiveOS sebelumnya: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Anda akan upgrade Tails pada %(parent_size)s %(vendor)s %(model)s device (%(device)s). Bebebrapa Volume persistent pada perangkat ini akan tetap tidak berubah . Lanjutkan ?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Unduhan komplet!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Pengunduhan gagal:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Anda dapat mencoba lagi untuk melanjutkan download Anda"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Tidak bisa mereset MBR. anda mungkin tidak meiliki Paket 'syslinux' yang terinstal"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "File terpilih tidak bisa dibaca. silakan perbaharui izinnya atau pilih file lain"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Tidak bisa menggunakan file yang terpilih. anda mungkin lebih beruntung jika anda memindahkan ISO anda ke akar/root dari drive (ie:C\\) anda"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Tidak bisa menulis pada %(device)s, lewati"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO yg tak dikenal, melewatkan pencocokan checksum"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Tidak dikenal dbus kecuali selagi mencoba ke mount device: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s terpilih"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistem file yang tidak dikenal. perangkat anda mesti di format"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Rilis tidak diketahui: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Tidak terpasang '%(udi)s' pada '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "tidak terpasangnya /unmounting mounted filessytem pada '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Perangkat yang tidak didukung '%(device)s', silakan laporkan sebagai bug"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Filesystem yang tidak didukung: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Filesystem yang tidak didukung: %s Silakan backup dan format USB Anda dengan filesystem FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Update properties dari partisi sistem %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Mutakhirkan\ndengan cara klon"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Pasang Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Mutakhirkan dari ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Menggunakan Live system ISO yang ada sekarang"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Mencocokkan checksum MD5 ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Mencocokkan checksum SHA1 gambar LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Mencocokkan checksum SHA256 gambar LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Memeriksa filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Peringatan: Membuat overlay gigih baru akan menghapus yang sudah ada."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Peringatan: Tool ini harus dijalankan sebagai administrator. Untuk melakukan ini , klik kanan pada ikon dan buka Properties .Dibawah Tab Compatibility, cek box \"Jalankan program ini sebagai adminisrator\""
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Telah tertulis ke device pada %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Anda akan instal Tails pada %(size)s %(vendor)s %(model)s device (%(device)s). Semua data pada perangkat terpilih akan hilang . Lanjutkan?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Anda akan upgrade Tails pada %(parent_size)s %(vendor)s %(model)s device (%(device)s). Bebebrapa Volume persistent pada perangkat ini akan tetap tidak berubah . Lanjutkan ?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Anda sekarang menggunakan versi lama dari syslinux-extilinux yang tidak mensuport ext4 sistem file"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Anda dapat mencoba lagi untuk melanjutkan download Anda"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Anda harus menjalankan aplikasi ini sebagai root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "atau"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/is/is.po b/is/is.po
index cdee8ce..887f5c2 100644
--- a/is/is.po
+++ b/is/is.po
@@ -9,9 +9,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-02-13 09:53+0000\n"
-"Last-Translator: Sveinn í Felli <sv1 at fellsnet.is>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Icelandic (http://www.transifex.com/otf/torproject/language/is/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: is\n"
"Plural-Forms: nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klóna & setja upp\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Þú verður að vera rót/root til að keyra þetta forrit"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Setja upp af ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Afþjappa keyrslukerfi á viðtökutæki..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Uppsetningarforrit %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Skrifaði á tækið með %(speed)d MB/sek"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valið"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Set upp OLPC ræsiskrá..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Vandamál kom upp við að keyra eftirfarandi skipun: `%(command)s`.\nNákvæmari útlistun var skrifuð í '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Yfirfer SHA1-gátsummu Live ISO keyrslukerfis..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s er þegar ræsanlegt"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Yfirfer SHA256-gátsummu Live ISO keyrslukerfis..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Vantar þig hjálp? Lestu <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">hjálparskjölin</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Settu Tails upp á annan USB-lykil með því að afrita Tails-kerfið sem þú ert að nota núna.</li>\n\n<li>USB-minnislykillinn sem þú notar undir uppsetninguna verður forsniðinn og öll gögn á honum munu tapast.</li>\n\n<li>Varanlega gagnageymslan á Tails USB-lyklinum sem þú ert að nota núna verður ekki afrituð.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppfærðu annan USB-lykil í sömu útgáfu Tails-kerfis eins og þá sem þú ert að nota núna.</li>\n\n<li>Varanlega gagnageymslan á Tails USB-lyklinum sem þú uppfærir verður óbreytt.</li>\n\n<li>Varanlega gagnageymslan á Tails USB-lyklinum sem þú ert að nota núna verður ekki afrituð.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppfærðu annan USB-lykil í útgáfu Tails-kerfis úr ISO-diskmynd</li>\n\n<li>Varanlega gagnageymslan á Tails USB-lyklinum sem þú uppfærir verður óbreytt.</li>\n\n<li>Varanlega gagnageymslan á Tails USB-lyklinum sem þú ert að nota núna verður ekki afrituð.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Vafra"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Með því að úthluta aukaplássi á USB-lyklinum undir varanlega gagnageymslu, geturðu geymt gögn og stillingar sem haldast óbreytt á milli ræsinga á stýrikerfinu. Án þessa muntu ekki geta vistað gögn sem séu tiltæk eftir endurræsingu."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Reikna SHA1 gátsummuna fyrir %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Villa: SHA1-gátsumma Live ISO keyrslukerfisins er ógild. Þú getur keyrt þetta forrit með --noverify viðfanginu til að komast framhjá þessari öryggisprófun."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Get ekki fundið"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Óþekkt ISO-diskmynd, sleppi gátsummuprófun"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Get ekki fundið tækið %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ekki nægilegt diskapláss á tækinu.\n%dMB ISO + %dMB yfirlögn > %dMB laust pláss"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Bý til %sMB varanlega gagnageymslu"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Ekki er ennþá búið að tengja tækið inn í skráakerfið, þannig að ekki er hægt að finna út hve mikið pláss er laust."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Ná í %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Niðurhali lokið!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Tekst ekki að afrita %(infile)s yfir í %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Niðurhal mistókst: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Fjarlægi Live ISO keyrslukerfi"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Næ í %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drifið er hringtengt (loopback), sleppi endurstillingu á MBR-ræsigeira"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Tekst ekki að keyra chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Fer í unmount_device fyrir '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Villa við að yfirfara tæki"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Villa: gat ekki sett merkingu eða fengið UUID-auðkenni tækisins. Get ekki haldið áfram."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Villa: SHA1-gátsumma Live ISO keyrslukerfisins er ógild. Þú getur keyrt þetta forrit með --noverify viðfanginu til að komast framhjá þessari öryggisprófun."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Afþjappa keyrslukerfi á viðtökutæki..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Gat ekki fjarlægt skrá úr fyrra Live ISO keyrslukerfi: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Forsníð %(device)s sem FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Stóðst ISO MD5 gátsummuprófun"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Gat ekki fjarlægt möppu úr fyrra Live ISO keyrslukerfi: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Stóðst ekki ISO MD5 gátsummuprófun"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Get ekki fundið tækið %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ef þú velur ekki fyrirliggjandi ISO-keyrsludiskmynd, verður valinni útgáfu hlaðið niður fyrir þig."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Get ekki skrifað á %(device)s, sleppi þessu."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Setja upp\nmeð því að klóna"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Sumar disksneiðar marktækisins %(device)s eru tengdar í skráakerfið. Þær verða aftengdar áður en uppsetningarferlið hefst"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Setja upp Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Óþekkt skráakerfi. Það gæti þurft að forsníða tækið."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Uppsetningu lokið!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Óstutt skráakerfi: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Uppsetningu lokið! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Uppsetningunni er lokið. Ýttu á 'Í lagi' til að loka þessu forriti."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Tókst ekki að tengja tæki: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Uppsetning ræsistjóra..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Engir tengipunktar fundust"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Ómögulegt er að uppfæra tækið %(pretty_name)s því það var ekki útbúið með Tails-uppsetningarforritinu. Þú ættir frekar að nota %(action)s til að uppfæra Tails á þessu tæki."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Mistókst að útbúa LiveUSB-keyrslukerfi!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Fer í unmount_device fyrir '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Vertu viss um að afþjappa allri liveusb-creator zip-skránni áður en þú keyrir þetta forrit."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Aftengi tengd skráakerfi á '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Gakktu úr skugga um að USB-lykillinn þinn sé tengdur og að hann sé forsniðinn með FAT-skráakerfi"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Aftengi '%(udi)s' á '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Tengipunktur %s er til staðar eftir aftengingu"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Ekkert laust pláss á tækinu %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Sneiði geymslupláss tækisins %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Engir tengipunktar fundust"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Uppfæri eiginleika kerfisdisksneiðar %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ekki nægilegt diskapláss á tækinu.\n%dMB ISO + %dMB yfirlögn > %dMB laust pláss"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Óstutt tæki '%(device)s', tilkynntu um þessa villu."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Disksneið er FAT16; takmarka stærð yfirlagnar við 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Reyni samt að halda áfram."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Disksneið er FAT32; takmarka stærð yfirlagnar við 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Yfirfer skráarkerfi..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Sneiði geymslupláss tækisins %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Get ekki breytt heiti á gagnarými: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Varanleg gagnageymsla"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Uppsetning ræsistjóra..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Varanleg gagnageymsla (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Staðfestu val þitt á tæki"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Fjarlægi %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Endurles útgáfur..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s er þegar ræsanlegt"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Uppfærði útgáfur!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Gat ekki fundið disksneið"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Fjarlægi %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Forsníð %(device)s sem FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Fjarlægi Live ISO keyrslukerfi"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Frumstilli aðalræsifærslu (MBR) %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Veldu Live ISO keyrslukerfi"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Set upp OLPC ræsiskrá..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drifið er hringtengt (loopback), sleppi endurstillingu á MBR-ræsigeira"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Sumar disksneiðar marktækisins %(device)s eru tengdar í skráakerfið. Þær verða aftengdar áður en uppsetningarferlið hefst"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tegund upprunakóða styður ekki sannvottun á ISO MD5 gátsummu, sleppi þessu"
+msgid "Calculating the SHA1 of %s"
+msgstr "Reikna SHA1 gátsummuna fyrir %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Samræmi gögn á diski..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Úttakstæki"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Villa við að yfirfara tæki"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Tækið \"%(pretty_name)s\" er of lítið til að hægt sé að setja Tails upp á því (að minnsta kosti %(size)s GB eru nauðsynleg)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Fann ekki nein studd tæki"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Skráin sem þú valdir er ekki lesanleg. Lagaðu heimildir hennar eða veldu aðra skrá."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Gakktu úr skugga um að USB-lykillinn þinn sé tengdur og að hann sé forsniðinn með FAT-skráakerfi"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Vandamál kom upp við að keyra eftirfarandi skipun: `%(command)s`.\nNákvæmari útlistun var skrifuð í '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Óstutt skráakerfi: %s\nTaktu öryggisafrit af USB-lyklinum og forsníddu hann með FAT-skráakerfi."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Þessi hnappur gerir þér kleift að vafra eftir fyrirliggjandi LiveISO-keyrslukerfisdiskmynd sem þú ert þegar búinn að sækja. Ef þú velur ekki neitt, verður útgáfu sjálfvirkt hlaðið niður fyrir þig."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Tókst ekki að sækja Win32_LogicalDisk; win32com fyrirspurn skilaði engum niðurstöðum"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Þessi hnappur lætur gerð LiveUSB-keyrslukerfisins hefjast. Í því felst að sækja útgáfu kerfisins (ef ekki var valin útgáfa sem þegar var búið að sækja), að afþjappa ISO-diskmyndina á USB-tækið, að búa til varanlega gagnageymslu og að setja upp ræsistjóra."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Get ekki fundið"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Þetta er USB-minnislykillinn sem þú ætlar að setja Live-keyrslukerfið upp á. Þetta tæki verður að vera forsniðið með FAT-skráakerfi."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Óþekkt útgáfa: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Næ í %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Þetta er framvinduvísirinn sem sýnir hversu langt er komið við að útbúa LiveUSB-keyrslukerfið"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Villa: gat ekki sett merkingu eða fengið UUID-auðkenni tækisins. Get ekki haldið áfram."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Þetta er stöðuskjárinn þar sem öll skilaboð eru birt."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Uppsetningu lokið! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Reyni samt að halda áfram."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB-drif fannst"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Aðvörun: Þetta tól verður að keyra sem kerfisstjóri (administrator). Til að gera það, hægri-smelltu á táknmyndina og opnaðu eiginleikana (Properties). Á samhæfniflipanum (Compatibility), hakaðu við að keyra þetta forrit sem kerfisstjóri (Run this program as an administrator)."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Get ekki breytt heiti á gagnarými: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Tekst ekki að keyra chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Tekst ekki að afrita %(infile)s yfir í %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Ekki tókst að finna neitt USB-drif"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Tækið \"%(pretty_name)s\" er of lítið til að hægt sé að setja Tails upp á því (að minnsta kosti %(size)s GB eru nauðsynleg)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Fann ekki nein studd tæki"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Gat ekki fundið disksneið"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Setja upp af ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Tókst ekki að sækja Win32_LogicalDisk; win32com fyrirspurn skilaði engum niðurstöðum"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Ómögulegt er að uppfæra tækið %(pretty_name)s því það var ekki útbúið með Tails-uppsetningarforritinu. Þú ættir frekar að nota %(action)s til að uppfæra Tails á þessu tæki."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Endurles útgáfur..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Uppfærði útgáfur!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Uppsetningu lokið!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Tókst ekki að tengja tæki"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Tókst ekki að tengja tæki: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Staðfestu val þitt á tæki"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Gat ekki fjarlægt möppu úr fyrra Live ISO keyrslukerfi: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Þú ert að fara að setja Tails upp á %(size)s %(vendor)s %(model)s tækinu (%(device)s). Öll gögn á valda tækinu munu tapast. Halda áfram?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Gat ekki fjarlægt skrá úr fyrra Live ISO keyrslukerfi: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Þú ert að fara að uppfæra Tails á %(parent_size)s %(vendor)s %(model)s tækinu (%(device)s). Öll gögn á valda tækinu munu haldast óbreytt. Halda áfram?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Niðurhali lokið!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Niðurhal mistókst: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Þú getur reynt aftur til að klára niðurhalið"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Get ekki endurstillt MBR-ræsigeira. Hugsanlega ertu ekki með `syslinux` pakkann uppsettann."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Skráin sem þú valdir er ekki lesanleg. Lagaðu heimildir hennar eða veldu aðra skrá."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Gat ekki notað völdu skrána. Það gæti gengið betur ef þú færir ISO-skrána á rót drifsins (dæmi: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Get ekki skrifað á %(device)s, sleppi þessu."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Óþekkt ISO-diskmynd, sleppi gátsummuprófun"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Óþekkt dbus-frávik þegar reynt var að tengja tæki í skráakerfi: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s valið"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Óþekkt skráakerfi. Það gæti þurft að forsníða tækið."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Óþekkt útgáfa: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Aftengi '%(udi)s' á '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Aftengi tengd skráakerfi á '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Óstutt tæki '%(device)s', tilkynntu um þessa villu."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Óstutt skráakerfi: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Óstutt skráakerfi: %s\nTaktu öryggisafrit af USB-lyklinum og forsníddu hann með FAT-skráakerfi."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Uppfæri eiginleika kerfisdisksneiðar %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Uppfæra\nmeð því að klóna"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Setja upp Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Uppfæra\naf ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Nota fyrirliggjandi Live ISO keyrslukerfi"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Yfirfer MD5-gátsummu á ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Yfirfer SHA1-gátsummu Live ISO keyrslukerfis..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Yfirfer SHA256-gátsummu Live ISO keyrslukerfis..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Yfirfer skráarkerfi..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Aðvörun: Það að búa til nýja varanlega gagnageymslu mun eyða út þeirri sem fyrir er."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Aðvörun: Þetta tól verður að keyra sem kerfisstjóri (administrator). Til að gera það, hægri-smelltu á táknmyndina og opnaðu eiginleikana (Properties). Á samhæfniflipanum (Compatibility), hakaðu við að keyra þetta forrit sem kerfisstjóri (Run this program as an administrator)."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Skrifaði á tækið með %(speed)d MB/sek"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Þú ert að fara að setja Tails upp á %(size)s %(vendor)s %(model)s tækinu (%(device)s). Öll gögn á valda tækinu munu tapast. Halda áfram?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Þú ert að fara að uppfæra Tails á %(parent_size)s %(vendor)s %(model)s tækinu (%(device)s). Öll gögn á valda tækinu munu haldast óbreytt. Halda áfram?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Þú ert að nota gamla útgáfu af syslinux-extlinux sem styður ekki ext4-skráakerfið"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Þú getur reynt aftur til að klára niðurhalið"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Þú verður að vera rót/root til að keyra þetta forrit"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "eða"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/it/it.po b/it/it.po
index ce6a932..5d70a21 100644
--- a/it/it.po
+++ b/it/it.po
@@ -15,7 +15,7 @@
# Michele Orrù <maker.py at gmail.com>, 2012
# Paolo Stivanin <paolostivanin at gmail.com>, 2014
# Pietro Messineo <pietromessineo at hotmail.it>, 2015
-# Random_R, 2013-2015
+# Random_R, 2013-2015,2017
# Rossano Praderi <dshortway at gmail.com>, 2013
# spawned76 <fswitch20 at hotmail.com>, 2012
# Vai Ton <eyadlorenzo at gmail.com>, 2015
@@ -24,9 +24,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Alessandro Manfredi <a.n0on3 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-02 20:27+0000\n"
+"Last-Translator: Random_R\n"
"Language-Team: Italian (http://www.transifex.com/otf/torproject/language/it/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -34,591 +34,551 @@ msgstr ""
"Language: it\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clona e installa\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Per eseguire questa applicazione sono necessari i privilegi di root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Installa da ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Estrazione dell'immagine live nel dispositivo di destinazione..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Installatore di %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Scrittura eseguita a %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s selezionato/i"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configurazione del file di boot OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Si è verificato un problema durante l'esecuzione del comando: `%(command)s`.\nPer visualizzare ulteriori dettagli aprire il file '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verifica SHA1 dell'immagine LiveCD in corso..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s è già avviabile"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verifica SHA256 dell'immagine LiveCD in corso..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Hai bisogno di aiuto? Leggi la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentazione</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installa Tails su un'altra chiave USB copiando il sistema Tails che stai utilizzando al momento.</li>\n\n<li>La chiave USB sulla quale effettuerai l'installazione verrà formattata e tutti i dati su essa presenti verranno persi.</li>\n\n<li>Il disco cifrato persistente sulla chiave USB Tails che stai usando al momento non verrà copiato.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Aggiorna un'altra chiave USB Tails alla stessa versione di Tails che stai usando al momento.</li>\n\n<li>Il disco cifrato persistente sulla chiave USB Tails che aggiornerai verrà preservato.</li>\n\n<li>Il disco cifrato persistente sulla chiave USB Tails che stai usando al momento non verrà copiato.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Aggiorna un'altra chiave USB Tails alla versione di un'immagine ISO</li>\n\n<li>Il disco cifrato persistente sulla chiave USB Tails che aggiornerai verrà preservato.</li>\n\n<li>Il disco cifrato persistente sulla chiave USB Tails che stai usando al momento non verrà copiato.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Sfoglia"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Allocando spazio extra sulla chiavetta USB per un overlay permanente, sarà possibile memorizzare dati ed effettuare modifiche permanenti al sistema operativo live. In caso contrario, non sarà possibile salvare dati da mantenere dopo un riavvio."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calcolo SHA1 di %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Errore: lo SHA1 del Live CD non è valido. È possibile eseguire il programma con l'opzione --noverify per non eseguire la verifica."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Impossibile trovare"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Immagine ISO sconosciuta: la verifica del checksum non verrà eseguita"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Impossibile trovare il dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Spazio libero sul dispositivo insufficiente.\n%dMB ISO + %dMB overlay > %dMB spazio libero"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creazione overlay persistente %s MB"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Il dispositivo non è stato ancora montato, quindi non è possibile determinare lo spazio disponibile."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Scaricare %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download completo!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Impossibile effettuare la copia da %(infile)s a %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download fallito:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Il Live OS esistente è in fase di cancellazione"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Download di %s in corso"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Il drive è una unità di loopback, operazione di reset del MBR ignorata"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Impossibile completare il comando chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Inserire unmount_device per '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Errore durante la rilevazione della periferica"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Errore: impossibile impostare l'etichetta o ottenere l'UUID del dispositivo. Impossibile continuare."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Errore: lo SHA1 del Live CD non è valido. È possibile eseguire il programma con l'opzione --noverify per non eseguire la verifica."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Estrazione dell'immagine live nel dispositivo di destinazione..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Impossibile rimuovere il file della precedente LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formattazione %(device)s con filesystem FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Verifica ISO MD5 completata correttamente"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Impossibile rimuovere la directory della precendente LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verifica ISO MD5 fallita"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Impossibile trovare il dispositivo %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Se non si ha selezionato un Live ISO esistente, verrà scaricata la release selezionata."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Impossibile scrivere su %(device)s, operazione ignorata."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installa attraverso clonazione"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Alcune partizioni del dispositivo di destinazione %(device)s sono montate. Verranno smontate prima di iniziare il processo di installazione."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installare Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Filesystem sconosciuto. Potrebbe essere necessario formattare il disco di nuovo."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installazione completata!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Filesystem non supportato: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installazione completata! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Eccezione GLib sconosciuta tentando di montare il dispositivo: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "L'installazione è stata completata. Premere OK per chiudere il programma."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Impossibile eseguire il mount del dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installazione bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nessun punto di mount definito"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Impossibile aggiornare il dispositivo %(pretty_name)s perchè non è stato creato con l'installer di Tails. Dovresti usare %(action)s per aggiornare Tails su questo dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Creazione di LiveUSB fallita!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Inserire unmount_device per '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Accertarsi di aver estratto il file zip liveusb-creator prima di eseguire il programma"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Smontaggio dei filesystem montati su '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Assicurarsi che il pendrive USB sia collegato e formattato con filesystem FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Smontaggio di '%(udi)s' su '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount %s esiste dopo l'operazione di unmount"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Spazio insufficiente sulla periferica %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partizionamento dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nessun punto di mount definito"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aggiornamento proprietà della partizione di sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Spazio libero sul dispositivo insufficiente.\n%dMB ISO + %dMB overlay > %dMB spazio libero"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dispositivo '%(device)s' non supportato, si prega di segnalare l'errore."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "La partizione è in FAT16; restrizione della dimensione dell'overlay a 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Tentativo di continuare comunque."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "La partizione è FAT32; restrizione della dimensione dell'overlay a 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verifica del filesystem in corso..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partizionamento dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Impossibile cambiare l'etichetta di volume: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistenza Dati"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installazione bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Archiviazione Permanente (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Impossibile trovare il modulo '%s' COM32"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Confermare il dispositivo selezionato"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Cancellazione %(file)s in corso"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Ricaricamento delle release in corso..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s è già avviabile"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Release aggiornate!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Impossibile trovare la partizione"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Cancellazione %(file)s in corso"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formattazione %(device)s con filesystem FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Il Live OS esistente è in fase di cancellazione"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Impossibile trovare syslinux' gptmbr.bin"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Lettura MBR estratto da %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Impossibile leggere MBR estratto da %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Reset del Master Boot Record di %s in corso"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selezionare Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configurazione del file di boot OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Il drive è una unità di loopback, operazione di reset del MBR ignorata"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Alcune partizioni del dispositivo di destinazione %(device)s sono montate. Verranno smontate prima di iniziare il processo di installazione."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "La verifica MD5 sul file ISO selezionato non è supportata. L'operazione verrà ignorata."
+msgid "Calculating the SHA1 of %s"
+msgstr "Calcolo SHA1 di %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizzazione dati sul disco..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo di destinazione"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Errore durante la rilevazione della periferica"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Il dispositivo \"%(pretty_name)s\" è troppo piccolo per installarci Tails (almeno %(size)s GB necessari)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nessun dispositivo supportato trovato"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Il file selezionato è illeggibile. Si prega di modificarne i permessi o selezionare un altro file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Assicurarsi che il pendrive USB sia collegato e formattato con filesystem FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Si è verificato un problema durante l'esecuzione del comando: `%(command)s`.\nPer visualizzare ulteriori dettagli aprire il file '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Filesystem non supportato: %s\nEseguire un backup e formattare il pendrive USB con il filesystem FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Questo pulsante consente la ricerca di un sistema Live ISO esistente, precedentemente scaricato. Se non se ne eleziona uno, una release verrà scaricata automaticamente."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Impossibile trovare Win32_LogicalDisk; win32com non ha restituito nessun risultato"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Questo pulsante avvierà il processo di creazione LiveUSB. Ciò implica lo scaricamento opzionale di una release (se non ne è stata selezionata una esistente), l'estrazione dell'ISO nel dispositivo USB, la creazione dell'overlay permanente e l'installazione del bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Impossibile trovare"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Questa è la chiavetta USB nella quale si vuole installare il sistema Live. Questo dispositivo deve essere formattato con il filesystem FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Assicurati di estrarre l'intero file zip con l'installer di Tails prima di avviare questo programma."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Release sconosciuta: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Download di %s in corso"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Questa è la barra di progresso che indicherà a che punto si è con il processo di creazione della LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Errore: impossibile impostare l'etichetta o ottenere l'UUID del dispositivo. Impossibile continuare."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Questa è la console di stato, dove vengono scritti tutti i messaggi."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installazione completata! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Tentativo di continuare comunque."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Installazione di Tails fallita!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Attenzione: questo programma necessita dei permessi di amministratore. Per poterlo aprire, fai click destro sull'icona, quindi su \"Proprietà\". Sotto la scheda Compatibilità, click sulla box \"Apri questo programma come Administrator\""
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Installer di Tails"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Drive USB trovato"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Nessun dispositivo adatto all'installazione di Tails trovato"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Impossibile cambiare l'etichetta di volume: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Inserisci una chiave USB o una scheda SD di almeno %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Impossibile completare il comando chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Impossibile effettuare la copia da %(infile)s a %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nessuna periferica USB trovata"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Il dispositivo \"%(pretty_name)s\" è troppo piccolo per installarci Tails (almeno %(size)s GB necessari)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nessun dispositivo supportato trovato"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Installa clonando\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Impossibile trovare la partizione"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Installa da ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Impossibile trovare Win32_LogicalDisk; win32com non ha restituito nessun risultato"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Impossibile aggiornare il dispositivo %(pretty_name)s perchè non è stato creato con l'installer di Tails. Dovresti usare %(action)s per aggiornare Tails su questo dispositivo."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Riscontrato un errore durante l'installazione di Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Ricaricamento delle release in corso..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Release aggiornate!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installazione completata!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Installazione completata."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Impossibile montare il dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Impossibile eseguire il mount del dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Confermare il dispositivo selezionato"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Impossibile rimuovere la directory della precendente LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Si sta per installare Tails sul dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Tutti i dati sul dispositivo selezionato verranno persi. Continuare?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Impossibile rimuovere il file della precedente LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Si sta per aggiornare Tails sul dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Qualsiasi volume persistente su questo dispositivo non subirà modifiche. Continuare?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download completo!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download fallito:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "È possibile tentare di ripristinare il download"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Impossibile effettuare il reset del MBR. Probabilmente il pacchetto \"syslinux\" non è installato installato."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Il file selezionato è illeggibile. Si prega di modificarne i permessi o selezionare un altro file."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Impossibile aprire il file selezionato. Provare a spostare il file ISO sulla root del disco (ie: C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Impossibile scrivere su %(device)s, operazione ignorata."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Immagine ISO sconosciuta: la verifica del checksum non verrà eseguita"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Eccezione dbus sconosciuta durante il mount del dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s selezionato/i"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Filesystem sconosciuto. Potrebbe essere necessario formattare il disco di nuovo."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Impossibile trovare LiveOS su ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Release sconosciuta: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Impossibile rilevare dispositivo a blocchi sottostante: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Smontaggio di '%(udi)s' su '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Problema nell'esecuzione di `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Smontaggio dei filesystem montati su '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' non esiste"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dispositivo '%(device)s' non supportato, si prega di segnalare l'errore."
+msgid "'%s' is not a directory"
+msgstr "'%s' non è una cartella"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Filesystem non supportato: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Salto '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Filesystem non supportato: %s\nEseguire un backup e formattare il pendrive USB con il filesystem FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Problema nell'esecuzione di `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Aggiornamento proprietà della partizione di sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Impossibile aprire il dispositivo per la scrittura."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Aggiorna attraverso clonazione"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Usa ISO di sistema Live esistente:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Seleziona una distribuzione da scaricare:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Dispositivo di destinazione:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installare Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Aggiorna da immagine ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Per avviare l'installer di Tails ti serve un'immagine ISO che può essere scaricata dal sito di Tails: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usare sistema Live ISO esistente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installa"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifica del checksum MD5 del file ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Installa Tails su una nuova chiave USB."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verifica SHA1 dell'immagine LiveCD in corso..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• La chiave USB su cui installi viene formattata e tutti i dati eliminati."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verifica SHA256 dell'immagine LiveCD in corso..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Aggiorna"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verifica del filesystem in corso..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Aggiorna una chiave USB Tails ad una versione su immagine ISO."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Attenzione: la creazione di un overlay persistente eliminerà l'overlay esistente."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• La memoria persistente cifrata della chiave USB Tails che aggiorni viene conservata."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Attenzione: questo programma necessita dei permessi di amministratore. Per poterlo aprire, fai click destro sull'icona, quindi su \"Proprietà\". Sotto la scheda Compatibilità, click sulla box \"Apri questo programma come Administrator\""
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Serve aiuto? Leggi la <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentazione</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Scrittura eseguita a %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Installa clonando"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Si sta per installare Tails sul dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Tutti i dati sul dispositivo selezionato verranno persi. Continuare?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Installa Tails su un'altra chiave USB copiando il sistema Tails che stai usando attualmente."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Si sta per aggiornare Tails sul dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Qualsiasi volume persistente su questo dispositivo non subirà modifiche. Continuare?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• La memoria persistente cifrata della chiave USB Tails che stai usando attualmente non viene copiata."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Aggiorna clonando"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "La versione di syslinux-extlinux in uso non supporta il filesystem ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Aggiorna un'altra chiave USB Tails alla stessa versione di Tails che stai usando attualmente."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "È possibile tentare di ripristinare il download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Aggiorna da ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Per eseguire questa applicazione sono necessari i privilegi di root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Aggiorna un'altra chiave USB Tails alla versione di un'immagine ISO."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "o"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Serve aiuto? Leggi la <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentazione</a>"
diff --git a/ja/ja.po b/ja/ja.po
index 333d36c..b5a66df 100644
--- a/ja/ja.po
+++ b/ja/ja.po
@@ -16,9 +16,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Tokumei Nanashi\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Japanese (http://www.transifex.com/otf/torproject/language/ja/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -26,591 +26,551 @@ msgstr ""
"Language: ja\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"クローン と インストール\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "このアプリケーションをrootとして実行しなければなりません"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ISO からインストール\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "ライブイメージをターゲットのデバイスに展開中..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s インストーラー"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "%(speed)d MB/秒でデバイスに書き込まれています"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)sが選択されました"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPCブートファイルをセットアップしています..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "以下のコマンドの実行に問題がありました: `%(command)s`。\n詳細なエラーログは '%(filename)s' に書かれています。"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "LiveCD イメージの SHA1チェックサム を検証中..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%sはすでに起動可能です"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "LiveCD イメージの SHA256チェックサム を検証中..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">助けが必要ですか？<a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">付随資料</span></a>を読んで下さい。</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>現在使用されるＴａｉｌｓシステムをコピーして、他のＵＳＢデバイスにインストールする..</li>\n\n<li>その新しいＵＳＢデバイスは初期化され、含まれるデータは全て削除されます。</li>\n\n<li>現在使用されるＴａｉｌｓＵＳＢデバイスの暗号化される永続記憶装置はコピーされません。</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>他のＴａｉｌｓＵＳＢデバイスを、現在使用されるＴａｉｌｓデバイスのバージョンにアップグレードする。</li>\n\n<li>アップグレードされるＴａｉｌｓデバイスの暗号化される永続記憶装置は温存されます。</li>\n\n<li>現在使用されるＴａｉｌｓＵＳＢデバイスの暗号化される永続記憶装置はコピーされません。</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>他のＴａｉｌｓＵＳＢデバイスを、ＩＳＯイメージのバージョンにアップグレードする。</li>\n\n<li>アップグレードされるＴａｉｌｓデバイスの暗号化される永続記憶装置は温存されます。</li>\n\n<li>現在使用されるＴａｉｌｓＵＳＢデバイスの暗号化される永続記憶装置はコピーされません。</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "参照"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "永続的オーバーレイにUSBメモリ上の余分なスペースを割り当てることで、データを保存し、liveオペレーティングシステムに永続的な変更を加えることができます。それがなければ、再起動後も持続するデータを保存することはできません。"
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%sの SHA1を計算中"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "エラー: LiveCD の SHA1 ハッシュ値が不当です。検証チェックを迂回するには、プログラムに --noverify オプションを付けて実行します。"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "見つけることができません。"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "不明なISO、チェックサム検証をスキップします"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "デバイス %s が見つかれません"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "デバイス上に十分な空き領域がありません。\n%dMB ISO + %dMB オーバーレイ > %dMB 空き領域"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMB 永続オーバーレイを作成中"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "デバイスがまだマウントされていないため、空き容量を測定できません。"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)sをダウンロード"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ダウンロード完了！"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "%(outfile)sを%(infile)sにコピーできません: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ダウンロード失敗: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "既存の LiveOS を削除中"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s をダウンロード中..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "ドライブがループバックです。MBRリセットをスキップします。"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "%(file)sをchmodできません: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "'%(device)s'に unmount_device を入力中"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "デバイスを厳密に調査中にエラー"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "エラー: ファイルシステムのラベルを設定できないか、デバイスの UUID を取得できません。そのため処理を継続できません。"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "エラー: LiveCD の SHA1 ハッシュ値が不当です。検証チェックを迂回するには、プログラムに --noverify オプションを付けて実行します。"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "ライブイメージをターゲットのデバイスに展開中..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "以前の LiveOSからファイルを削除できません: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)sをFAT32としてフォーマット中"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISOのMD5チェックサムがパスされました"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "以前の LiveOSからディレクトリ を削除できません: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISOのMD5チェックサムの検証が失敗しました"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "デバイス %s が見つかれません"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "既存のLive ISOを選択しなければ、選択されたリリースがあなたのためにダウンロードされます。"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "%(device)sに書き込めません、スキップします"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "クローニングでインストールする"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "ターゲットのデバイス %(device)s のパーティションのいくつかがマウントされました。インストールプロセスが開始する前にこれらはアンマウントされます。"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tailsをインストール"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "不明なファイルシステム。。デバイスを再フォーマットする必要があるかもしれません。"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "インストール完了しました！"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "サポートしていないファイルシステム: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "インストール完了！ (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "インストールが完了しました。 OKを押して、このプログラムを閉じてください。"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "デバイスをマウントできません: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "ブートローダーをインストール中 ..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "マウントポイントがみつかりません"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Tails インストーラーを使用して作成されなかったため、デバイス %(pretty_name)s をアップグレードすることができません。このデバイス上の Tails をアップグレードするためには、代わりに %(action)s を使用する必要があります。"
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB 作成失敗!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "'%(device)s'に unmount_device を入力中"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "このプログラムを実行する前に liveusb-creator zip ファイル全体を展開したかどうか確認してください。"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "%(device)s上にマウントされたファイルシステムのマウントを解除中"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB ストレージデバイスが接続され、FAT ファイルシステムでフォーマットされていることを確認してください。"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "%(device)s上の'%(udi)s'のマウントを解除中"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "アンマウント後%sの実体をマウント"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "デバイス %(device)s上に十分な空き領域がありません。"
+msgid "Partitioning device %(device)s"
+msgstr "デバイス %(device)s のパーティションを構成中"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "マウントポイントがみつかりません"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "システムパーティション %(system_partition)s のプロパティを更新中"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "デバイス上に十分な空き領域がありません。\n%dMB ISO + %dMB オーバーレイ > %dMB 空き領域"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "サポートされていないデバイス '%(device)s' 、バグを報告してください。"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "パーティションはFAT16です。2Gにオーバーレイサイズを制限します。"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "とにかく続行しようとしています。"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "パーティションはFAT32です。4Gにオーバーレイサイズを制限します。"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "ファイルシステムを検証中..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "デバイス %(device)s のパーティションを構成中"
+msgid "Unable to change volume label: %(message)s"
+msgstr "ボリュームラベルを変更できません: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "永続的ストレージ"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "ブートローダーをインストール中 ..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "永続的ストレージ (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "デバイスの選択を確認してください。"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)sを削除中"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "リリースを更新中..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%sはすでに起動可能です"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "リリースがアップデートされました！"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "パーティションを見つけられません"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)sを削除中"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)sをFAT32としてフォーマット中"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "既存の LiveOS を削除中"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "%sのマスターブートレコードをリセット中"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO を選択する"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPCブートファイルをセットアップしています..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "ドライブがループバックです。MBRリセットをスキップします。"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "ターゲットのデバイス %(device)s のパーティションのいくつかがマウントされました。インストールプロセスが開始する前にこれらはアンマウントされます。"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "ソースタイプはISOのMD5チェックサムの検証をサポートしていません、スキップします"
+msgid "Calculating the SHA1 of %s"
+msgstr "%sの SHA1を計算中"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "ディスク上のデータを同期化中..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "対象ドライブ"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "デバイスを厳密に調査中にエラー"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "デバイス \"%(pretty_name)s\" は記憶領域が小さすぎるため、 Tails をインストールすることができません（少なくとも %(size)s GB 必要です）。"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "サポートされているデバイスを見つけられません"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "選択されたファイルは読み込めません。パーミッションを修正するか、ほかのファイルを選択してください。"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB ストレージデバイスが接続され、FAT ファイルシステムでフォーマットされていることを確認してください。"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "以下のコマンドの実行に問題がありました: `%(command)s`。\n詳細なエラーログは '%(filename)s' に書かれています。"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "サポートしていないファイルシステム: %s\nUSB ストレージデバイスをバックアップし、FAT ファイルシステムでフォーマットしてください。"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "このボタンにより、以前にダウンロードした既存のLive system ISOを参照することができます。いずれかを選択しない場合、リリースが自動的にあなたのためにダウンロードされます。"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDiskを入手できません。win32comのクエリーがいかなる結果も返しませんでした。"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "このボタンはLiveUSB作成プロセスを開始します。これは任意に、リリースのダウンロード(既存のものが選択されていなかった場合)、USBデバイスへのISOの展開、永続的オーバーレイの作成、ブートローダーのインストールを必要とします。"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "見つけることができません。"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "これはあなたがLive systemをインストールしたいUSBメモリです。このデバイスはFATファイルシステムでフォーマットされていなければなりません。"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "不明なリリース: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s をダウンロード中..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "これはLiveUSB作成プロセスの進捗率を示すプログレスバーです"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "エラー: ファイルシステムのラベルを設定できないか、デバイスの UUID を取得できません。そのため処理を継続できません。"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "ここはステータスコンソールです。すべてのメッセージがここに書き込まれます。"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "インストール完了！ (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "とにかく続行しようとしています。"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB ドライブが見つかりました"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "警告: このツールは管理者として実行する必要があります。これを行うには、アイコンを右クリックして、プロパティーを開いてください。互換性タブで、「管理者としてこのプログラムを実行する」のチェックボックスをチェックしてください。"
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "ボリュームラベルを変更できません: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "%(file)sをchmodできません: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "%(outfile)sを%(infile)sにコピーできません: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "USB ストレージデバイスが一つも見つかりません"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "デバイス \"%(pretty_name)s\" は記憶領域が小さすぎるため、 Tails をインストールすることができません（少なくとも %(size)s GB 必要です）。"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "サポートされているデバイスを見つけられません"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "パーティションを見つけられません"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ISO からインストール\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDiskを入手できません。win32comのクエリーがいかなる結果も返しませんでした。"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Tails インストーラーを使用して作成されなかったため、デバイス %(pretty_name)s をアップグレードすることができません。このデバイス上の Tails をアップグレードするためには、代わりに %(action)s を使用する必要があります。"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "リリースを更新中..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "リリースがアップデートされました！"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "インストール完了しました！"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "デバイスをマウントできません"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "デバイスをマウントできません: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "デバイスの選択を確認してください。"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "以前の LiveOSからディレクトリ を削除できません: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "%(size)s %(vendor)s %(model)s デバイス (%(device)s) にTailsをインストールします。選択されたデバイスのすべてのデータが失われます。続行しますか？"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "以前の LiveOSからファイルを削除できません: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "%(parent_size)s %(vendor)s %(model)s デバイス (%(device)s) でTailsをアップグレードします。このデバイス上の永続的なボリュームが変更されることはありません。続行しますか？"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ダウンロード完了！"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ダウンロード失敗: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "ダウンロードを再開することができます"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBRをリセットできません。`syslinux`パッケージをインストールしていないかもしれません。"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "選択されたファイルは読み込めません。パーミッションを修正するか、ほかのファイルを選択してください。"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "選択されたファイルを使用できません。ISO をデバイスのルート(例えば C:\\) に移動するとさらに上手くいくかもしれません。"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "%(device)sに書き込めません、スキップします"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "不明なISO、チェックサム検証をスキップします"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "デバイスのマウントを試行中不明なdbus例外: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)sが選択されました"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "不明なファイルシステム。。デバイスを再フォーマットする必要があるかもしれません。"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "不明なリリース: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "%(device)s上の'%(udi)s'のマウントを解除中"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "%(device)s上にマウントされたファイルシステムのマウントを解除中"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "サポートされていないデバイス '%(device)s' 、バグを報告してください。"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "サポートしていないファイルシステム: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "サポートしていないファイルシステム: %s\nUSB ストレージデバイスをバックアップし、FAT ファイルシステムでフォーマットしてください。"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "システムパーティション %(system_partition)s のプロパティを更新中"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "クローニングでアップグレードする"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tailsをインストール"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "ＩＳＯイメージからアップグレードする"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "既存のLive system ISOを使用"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISOをMD5チェックサムを検証しています"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "LiveCD イメージの SHA1チェックサム を検証中..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "LiveCD イメージの SHA256チェックサム を検証中..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "ファイルシステムを検証中..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "警告: 新しい永続オーバーレイを作成すると既存のものを削除します。"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "警告: このツールは管理者として実行する必要があります。これを行うには、アイコンを右クリックして、プロパティーを開いてください。互換性タブで、「管理者としてこのプログラムを実行する」のチェックボックスをチェックしてください。"
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "%(speed)d MB/秒でデバイスに書き込まれています"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "%(size)s %(vendor)s %(model)s デバイス (%(device)s) にTailsをインストールします。選択されたデバイスのすべてのデータが失われます。続行しますか？"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "%(parent_size)s %(vendor)s %(model)s デバイス (%(device)s) でTailsをアップグレードします。このデバイス上の永続的なボリュームが変更されることはありません。続行しますか？"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "ext4ファイルシステムをサポートしていないsyslinux-extlinuxの古いバージョンを使用しています。"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "ダウンロードを再開することができます"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "このアプリケーションをrootとして実行しなければなりません"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "または"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/jv/jv.po b/jv/jv.po
index 72689b0..91c6a63 100644
--- a/jv/jv.po
+++ b/jv/jv.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Javanese (http://www.transifex.com/otf/torproject/language/jv/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: jv\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ka/ka.po b/ka/ka.po
index 3f8a299..3b4b6ba 100644
--- a/ka/ka.po
+++ b/ka/ka.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Georgian (http://www.transifex.com/otf/torproject/language/ka/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ka\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ან"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/kk/kk.po b/kk/kk.po
index 3724e5b..ec7a1a7 100644
--- a/kk/kk.po
+++ b/kk/kk.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kazakh (http://www.transifex.com/otf/torproject/language/kk/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: kk\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/km/km.po b/km/km.po
index 09af640..4a8ca23 100644
--- a/km/km.po
+++ b/km/km.po
@@ -9,8 +9,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Khmer (http://www.transifex.com/otf/torproject/language/km/)\n"
"MIME-Version: 1.0\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: km\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "អ្នកត្រូវតែដំណើរការកម្មវិធីនេះជា root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr ""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "ស្រង់រូបភាពមានចលនាទៅកាន់ឧបករណ៍គោលដៅ..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "កម្មវិធីដំឡើង %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "បានសរសេរទៅកាន់ឧបករណ៍ %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "បានជ្រើស %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "កំពុងរៀបចំឯកសារចាប់ផ្ដើមឡើងវិញ OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "មានបញ្ហាពេលប្រតិបត្តិពាក្យបញ្ជាដូចខាងក្រោម៖ `%(command)s`។\nកំណត់ហេតុកំហុសលម្អិតត្រូវបានសរសេរទៅកាន់ '%(filename)s'។"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "កំពុងផ្ទៀងផ្ទាត់ឆេកសាំ SHA1 នៃរូបភាព LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s អាចចាប់ផ្ដើមឡើងវិញបាន"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "កំពុងផ្ទៀងផ្ទាត់ឆេកសាំ SHA256 នៃរូបភាព LiveCD..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "កំហុស៖ SHA1 នៃ LiveCD របស់អ្នកគឺមិនត្រឹមត្រូវ។ អ្នកអាចដំណើរការកម្មវិធីនេះដោយប្រើអាគុយម៉ង់ --noverify ដើម្បីចៀសការពិនិត្យផ្ទៀងផ្ទាត់នេះ។"
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "មិនស្គាល់ ISO, រំលងការផ្ទៀងផ្ទាត់ឆេកសាំ"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "មិនមានទំហំទំនេរគ្រប់គ្រាន់នៅលើឧបករណ៍។\n%dMB ISO + %dMB overlay > ទំហំទំនេរ %dMB"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "ការបង្កើតកម្រិតសំឡេងថេរជាន់គ្នា %sMB"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "រកមើល"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "មិនអាចចម្លង %(infile)s ទៅកាន់ %(outfile)s ៖ %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "ដោយការបម្រុងទុកទំហំបន្ថែមនៅលើយូអេសប៊ីរបស់អ្នកសម្រាប់កម្រិតសំឡេងថេរជាន់គ្នា អ្នកនឹងអាចផ្ទុកទិន្នន័យ ហើយធ្វើការផ្លាស់ប្ដូរជាអចិន្ត្រៃយ៍ចំពោះប្រព័ន្ធប្រតិបត្តិការផ្ទាល់របស់អ្នក។ បើមិនបម្រុងទុកទេ អ្នកនឹងមិនអាចរក្សាទុកទិន្នន័យដែលនឹងមានបន្ទាប់ពីចាប់ផ្ដើមឡើងវិញបានឡើយ។"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "លុប Live OS ដែលមានស្រាប់"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "កំពុងគណនា SHA1 នៃ %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "មិនអាចប្រើ chmod %(file)s ៖ %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "រកមិនឃើញ"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "មិនអាចលុបឯកសារចេញពី LiveOS ពីមុន៖ %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "មិនអាចលុបថតចេញពី LiveOS ពីមុន៖ %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "មិនអាចរកឃើញឧបករណ៍ %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "ការបង្កើតកម្រិតសំឡេងថេរជាន់គ្នា %sMB"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "មិនអាចសរសេរនៅលើ %(device)s, រំលង។"
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "ឧបករណ៍មិនទាន់បានម៉ោន ដូច្នេះយើងមិនអាចកំណត់ទំហំទំនេរបានឡើយ។"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "ភាគថាសមួយចំនួននៃឧបករណ៍គោលដៅ %(device)s ត្រូវបានម៉ោន។ ពួកវានឹងត្រូវបានអាន់ម៉ោន មុនពេលចាប់ផ្ដើមដំណើរការដំឡើង។"
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "ទាញយក %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "មិនស្គាល់ប្រព័ន្ធឯកសារ។ ឧបករណ៍របស់អ្នកអាចចាំបាច់ត្រូវធ្វើទ្រង់ទ្រាយឡើងវិញ។"
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ការទាញយកបានបញ្ចប់!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "ប្រព័ន្ធឯកសារមិនគាំទ្រ៖ %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ការទាញយកបានបរាជ័យ៖"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "កំពុងទាញយក %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "មិនអាចម៉ោនឧបករណ៍៖ %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "ដ្រាយគឺជារង្វិលជុំត្រឡប់, រំលងការកំណត់ MBR ឡើងវិញ"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "រកមិនឃើញចំណុចម៉ោន"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "បញ្ចូលឧបករណ៍អាន់ម៉ោនសម្រាប់ '%(device)s'"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "កំហុសក្នុងការស្ទង់ឧបករណ៍"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "កំហុស៖ មិនអាចកំណត់ស្លាក ឬយក UUID នៃឧបករណ៍របស់អ្នក។ មិនអាចបន្ត។"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "កំហុស៖ SHA1 នៃ LiveCD របស់អ្នកគឺមិនត្រឹមត្រូវ។ អ្នកអាចដំណើរការកម្មវិធីនេះដោយប្រើអាគុយម៉ង់ --noverify ដើម្បីចៀសការពិនិត្យផ្ទៀងផ្ទាត់នេះ។"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "ស្រង់រូបភាពមានចលនាទៅកាន់ឧបករណ៍គោលដៅ..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "ការអាន់ម៉ោនប្រព័ន្ធឯកសារដែលបានម៉ោននៅលើ '%(device)s'"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "ការធ្វើទ្រង់ទ្រាយ %(device)s ជា FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "ការអាន់ម៉ោន '%(udi)s' នៅលើ '%(device)s'"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ឆេកសាំ ISO MD5 បានបញ្ចប់"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "ម៉ោន %s ដែលមានស្រាប់បន្ទាប់ពីអាន់ម៉ោន"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ការផ្ទៀងផ្ទាត់ឆេកសាំ ISO MD5 បានបរាជ័យ"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "ការចែកភាគថាសឧបករណ៍ %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "បើអ្នកមិនជ្រើស Live ISO ដែលមានស្រាប់ទេ ការចេញផ្សាយដែលបានជ្រើសនឹងត្រូវបានទាញយកសម្រាប់អ្នក។"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "ធ្វើបច្ចុប្បន្នភាពលក្ខណសម្បត្តិភាពថាសប្រព័ន្ធ %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "មិនគាំទ្រឧបករណ៍ '%(device)s', សូមរាយការណ៍កំហុស។"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "ដំឡើង Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "នៅតែព្យាយាមបន្ត។"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "ការដំឡើងបានបញ្ចប់!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "កំពុងផ្ទៀងផ្ទាត់ប្រព័ន្ធឯកសារ..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "ការដំឡើងបានបញ្ចប់! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ការដំឡើងបានបញ្ចប់។ ចុចយល់ព្រម ដើម្បីបិទកម្មវិធីនេះ។"
+msgid "Unable to change volume label: %(message)s"
+msgstr "មិនអាចប្ដូរស្លាកកម្រិតសំឡេង៖ %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "កំពុងដំឡើងកម្មវិធីផ្ទុកការចាប់ផ្ដើមឡើងវិញ..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "ការបង្កើត LiveUSB បានបរាជ័យ!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "សូមប្រាកដថាបានស្រង់ឯកសារ liveusb-creator zip ចេញទាំងស្រុង មុនពេលដំណើរការកម្មវិធីនេះ។"
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "សូមប្រាកដថាបានដោតយូអេសប៊ីរបស់អ្នក ហើយធ្វើទ្រង់ទ្រាយដោយប្រើប្រព័ន្ធឯកសារ FAT"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "ម៉ោន %s ដែលមានស្រាប់បន្ទាប់ពីអាន់ម៉ោន"
+msgid "Removing %(file)s"
+msgstr "កំពុងលុប %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "មិនមានទំហំទំនេរនៅលើឧបករណ៍ %(device)s"
+msgid "%s already bootable"
+msgstr "%s អាចចាប់ផ្ដើមឡើងវិញបាន"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "រកមិនឃើញចំណុចម៉ោន"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "រកមិនឃើញភាគថាស"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "មិនមានទំហំទំនេរគ្រប់គ្រាន់នៅលើឧបករណ៍។\n%dMB ISO + %dMB overlay > ទំហំទំនេរ %dMB"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "ភាគថាសគឺ FAT16; ការដាក់កម្រិតលើទំហំទៅ 2G"
+msgid "Formatting %(device)s as FAT32"
+msgstr "ការធ្វើទ្រង់ទ្រាយ %(device)s ជា FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "ភាគថាសគឺ FAT32; ការដាក់កម្រិតលើទំហំទៅ 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "ការចែកភាគថាសឧបករណ៍ %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "ទំហំផ្ទុកថេរ"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "ការផ្ទុកថេរ (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "សូមបញ្ជាក់ជម្រើសឧបករណ៍របស់អ្នក"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "កំពុងផ្ទុកការចេញផ្សាយឡើងវិញ..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "បានធ្វើបច្ចុប្បន្នការចេញផ្សាយ!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "កំពុងលុប %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "លុប Live OS ដែលមានស្រាប់"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "កំណត់ Master Boot Record របស់ %s ឡើងវិញ"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "ជ្រើស Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "កំពុងរៀបចំឯកសារចាប់ផ្ដើមឡើងវិញ OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "ដ្រាយគឺជារង្វិលជុំត្រឡប់, រំលងការកំណត់ MBR ឡើងវិញ"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "ភាគថាសមួយចំនួននៃឧបករណ៍គោលដៅ %(device)s ត្រូវបានម៉ោន។ ពួកវានឹងត្រូវបានអាន់ម៉ោន មុនពេលចាប់ផ្ដើមដំណើរការដំឡើង។"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "ប្រភេទប្រភពមិនគាំទ្រការផ្ទៀងផ្ទាត់ឆេកសាំ ISO MD5, រំលង"
+msgid "Calculating the SHA1 of %s"
+msgstr "កំពុងគណនា SHA1 នៃ %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "កំពុងធ្វើសមកាលកម្មទិន្នន័យនៅលើថាស..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "ឧបករណ៍គោលដៅ"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "កំហុសក្នុងការស្ទង់ឧបករណ៍"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "រកមិនឃើញឧបករណ៍គាំទ្រ"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "ឯកសារដែលបានជ្រើសជាឯកសារដែលមិនអាចអានបាន។ សូមកែសិទ្ធិ ឬជ្រើសឯកសារផ្សេង។"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "សូមប្រាកដថាបានដោតយូអេសប៊ីរបស់អ្នក ហើយធ្វើទ្រង់ទ្រាយដោយប្រើប្រព័ន្ធឯកសារ FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "មានបញ្ហាពេលប្រតិបត្តិពាក្យបញ្ជាដូចខាងក្រោម៖ `%(command)s`។\nកំណត់ហេតុកំហុសលម្អិតត្រូវបានសរសេរទៅកាន់ '%(filename)s'។"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "មិនគាំទ្រប្រព័ន្ធឯកសារ៖ %s\nសូមបម្រុងទុក និងធ្វើទ្រង់ទ្រាយយូអេសប៊ីរបស់អ្នកដោយប្រើប្រព័ន្ធឯកសារ FAT ។"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "ប៊ូតុងនេះអនុញ្ញាតឲ្យអ្នករកមើល Live system ISO មានស្រាប់ដែលអ្នកបានទាញយកពីមុន។ បើអ្នកមិនជ្រើសទេ ការចេញផ្សាយនឹងត្រូវបានទាញយកសម្រាប់អ្នកដោយស្វ័យប្រវត្តិ។"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "មិនអាចយក Win32_LogicalDisk; សំណួរ win32com មិនបានត្រឡប់លទ្ធផលណាមួយ"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "ប៊ូតុងនេះនឹងចាប់ផ្ដើមការបង្កើត LiveUSB ។ ភាពចាំបាច់នេះគឺទាញយកការចេញផ្សាយជាជម្រើស (បើមិនបានជ្រើសការចេញផ្សាយដែលមានស្រាប់) ស្រង់ ISO ចេញទៅកាន់ឧបករណ៍ USB បង្កើតកម្រិតសំឡេងថេរជាន់គ្នា រួចដំឡើងកម្មវិធីចាប់ផ្ដើមឡើងវិញ។"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "រកមិនឃើញ"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "នេះជាយូអេសប៊ីដែលអ្នកចង់ដំឡើង Live system របស់អ្នក។ ឧបករណ៍នេះត្រូវតែបានធ្វើទ្រង់ទ្រាយដោយប្រើប្រព័ន្ធឯកសារ FAT ។"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "មិនស្គាល់ការចេញផ្សាយ៖ %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "កំពុងទាញយក %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "នេះជារបារវឌ្ឍនភាពដែលបង្ហាញអំពីរយៈពេលដំណើរការបង្កើត LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "កំហុស៖ មិនអាចកំណត់ស្លាក ឬយក UUID នៃឧបករណ៍របស់អ្នក។ មិនអាចបន្ត។"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "នេះជាកុងសូលស្ថានភាព ដែលសារទាំងអស់នឹងត្រូវបានសរសេរទៅកាន់។"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "ការដំឡើងបានបញ្ចប់! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "នៅតែព្យាយាមបន្ត។"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "ព្រមាន៖ ឧបករណ៍នេះត្រូវដំណើរការជាអ្នកគ្រប់គ្រង។ ដើម្បីធ្វើវា អ្នកត្រូវចុចកណ្ដុរស្ដាំលើរូបតំណាង រួចបើកលក្ខណសម្បត្តិ។ នៅក្រោមផ្ទាំងភាពឆបគ្នា ធីកប្រអប់ \"ដំណើរការកម្មវិធីនេះជាអ្នកគ្រប់គ្រង\""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "មិនអាចប្ដូរស្លាកកម្រិតសំឡេង៖ %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "មិនអាចប្រើ chmod %(file)s ៖ %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "មិនអាចចម្លង %(infile)s ទៅកាន់ %(outfile)s ៖ %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "រកមិនឃើញដ្រាយយូអេសប៊ី"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "រកមិនឃើញឧបករណ៍គាំទ្រ"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "រកមិនឃើញភាគថាស"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "មិនអាចយក Win32_LogicalDisk; សំណួរ win32com មិនបានត្រឡប់លទ្ធផលណាមួយ"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "កំពុងផ្ទុកការចេញផ្សាយឡើងវិញ..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "បានធ្វើបច្ចុប្បន្នការចេញផ្សាយ!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "ការដំឡើងបានបញ្ចប់!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "មិនអាចម៉ោនឧបករណ៍"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "មិនអាចម៉ោនឧបករណ៍៖ %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "សូមបញ្ជាក់ជម្រើសឧបករណ៍របស់អ្នក"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "មិនអាចលុបថតចេញពី LiveOS ពីមុន៖ %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "អ្នកនឹងដំឡើង Tails នៅលើឧបករណ៍ %(size)s %(vendor)s %(model)s (%(device)s) ។ ទិន្នន័យទាំងអស់នៅលើឧបករណ៍នឹងត្រូវបាត់បង់។ បន្ត?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "មិនអាចលុបឯកសារចេញពី LiveOS ពីមុន៖ %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "អ្នកនឹងបង្កើនទំហំ Tails នៅលើឧបករណ៍ %(parent_size)s %(vendor)s %(model)s (%(device)s) ។ កម្រិតសំឡេងថេរនៅលើឧបករណ៍នេះ នឹងមិនផ្លាស់ប្ដូរទេ។ បន្ត?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ការទាញយកបានបញ្ចប់!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ការទាញយកបានបរាជ័យ៖"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "អ្នកអាចព្យាយាមម្ដងទៀតដើម្បីធ្វើបន្តការទាញយករបស់អ្នក"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "មិនអាចកំណត់ MBR ឡើងវិញ។ អ្នកប្រហែលជាមិនបានដំឡើងកញ្ចប់ `syslinux` ។"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "ឯកសារដែលបានជ្រើសជាឯកសារដែលមិនអាចអានបាន។ សូមកែសិទ្ធិ ឬជ្រើសឯកសារផ្សេង។"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "មិនអាចប្រើឯកសារដែលបានជ្រើស។ អ្នកអាចមានសំណាងជាង បើអ្នកផ្លាស់ទី ISO ទៅ root នៃដ្រាយរបស់អ្នក (ie: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "មិនអាចសរសេរនៅលើ %(device)s, រំលង។"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "មិនស្គាល់ ISO, រំលងការផ្ទៀងផ្ទាត់ឆេកសាំ"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "មិនស្គាល់ការលើកលែង dbus ពេលព្យាយាមម៉ោនឧបករណ៍៖ %(message)s"
+msgid "%(filename)s selected"
+msgstr "បានជ្រើស %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "មិនស្គាល់ប្រព័ន្ធឯកសារ។ ឧបករណ៍របស់អ្នកអាចចាំបាច់ត្រូវធ្វើទ្រង់ទ្រាយឡើងវិញ។"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "មិនស្គាល់ការចេញផ្សាយ៖ %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "ការអាន់ម៉ោន '%(udi)s' នៅលើ '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "ការអាន់ម៉ោនប្រព័ន្ធឯកសារដែលបានម៉ោននៅលើ '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "មិនគាំទ្រឧបករណ៍ '%(device)s', សូមរាយការណ៍កំហុស។"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "ប្រព័ន្ធឯកសារមិនគាំទ្រ៖ %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "មិនគាំទ្រប្រព័ន្ធឯកសារ៖ %s\nសូមបម្រុងទុក និងធ្វើទ្រង់ទ្រាយយូអេសប៊ីរបស់អ្នកដោយប្រើប្រព័ន្ធឯកសារ FAT ។"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "ធ្វើបច្ចុប្បន្នភាពលក្ខណសម្បត្តិភាពថាសប្រព័ន្ធ %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "ដំឡើង Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "ប្រើ Live system ISO ដែលមានស្រាប់"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ការផ្ទៀងផ្ទាត់ឆេកសាំ ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "កំពុងផ្ទៀងផ្ទាត់ឆេកសាំ SHA1 នៃរូបភាព LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "កំពុងផ្ទៀងផ្ទាត់ឆេកសាំ SHA256 នៃរូបភាព LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "កំពុងផ្ទៀងផ្ទាត់ប្រព័ន្ធឯកសារ..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "ព្រមាន៖ ការបង្កើតកម្រិតសំឡេងថេរជាន់លើ នឹងលុបកម្រិតសំឡេងដែលមានស្រាប់។"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "ព្រមាន៖ ឧបករណ៍នេះត្រូវដំណើរការជាអ្នកគ្រប់គ្រង។ ដើម្បីធ្វើវា អ្នកត្រូវចុចកណ្ដុរស្ដាំលើរូបតំណាង រួចបើកលក្ខណសម្បត្តិ។ នៅក្រោមផ្ទាំងភាពឆបគ្នា ធីកប្រអប់ \"ដំណើរការកម្មវិធីនេះជាអ្នកគ្រប់គ្រង\""
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "បានសរសេរទៅកាន់ឧបករណ៍ %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "អ្នកនឹងដំឡើង Tails នៅលើឧបករណ៍ %(size)s %(vendor)s %(model)s (%(device)s) ។ ទិន្នន័យទាំងអស់នៅលើឧបករណ៍នឹងត្រូវបាត់បង់។ បន្ត?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "អ្នកនឹងបង្កើនទំហំ Tails នៅលើឧបករណ៍ %(parent_size)s %(vendor)s %(model)s (%(device)s) ។ កម្រិតសំឡេងថេរនៅលើឧបករណ៍នេះ នឹងមិនផ្លាស់ប្ដូរទេ។ បន្ត?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "អ្នកកំពុងប្រើកំណែចាស់របស់ syslinux-extlinux ដែលមិនគាំទ្រប្រព័ន្ធឯកសារ ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "អ្នកអាចព្យាយាមម្ដងទៀតដើម្បីធ្វើបន្តការទាញយករបស់អ្នក"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "អ្នកត្រូវតែដំណើរការកម្មវិធីនេះជា root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ឬ"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/kn/kn.po b/kn/kn.po
index 38961ae..55a11d6 100644
--- a/kn/kn.po
+++ b/kn/kn.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kannada (http://www.transifex.com/otf/torproject/language/kn/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: kn\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "அல்லது\n"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ko/ko.po b/ko/ko.po
index 3fba86d..c80d45e 100644
--- a/ko/ko.po
+++ b/ko/ko.po
@@ -15,9 +15,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Chris Park <utopinator at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Korean (http://www.transifex.com/otf/torproject/language/ko/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -25,591 +25,551 @@ msgstr ""
"Language: ko\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "복사 및 설치"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "루트에서 이 응용프로그램을 실행해야 합니다."
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "ISO로 설치"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "대상 장치에 라이브 이미지를 추출 중..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s 설치"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "%(speed)d MB/초로 장치에 기록되었습니다"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s 선택됨"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC 부팅 파일을 설정합니다 ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "다음 명령의 실행에 문제가있었습니다 : `%(command)s`.\n자세한 오류 로그 '%(filename)s'에 적혀 있습니다."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "LiveCD 이미지 SHA1 체크섬 확인 중 ..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s는 이미 부팅 가능합니다"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "LiveCD 이미지 SHA256 체크섬 확인 중 ..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">도움이 필요하시다면 <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">이 문서</span></a>를 읽어주세요.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>현재 사용 중인 Tails 시스템을 복사하여 Tails를 다른 USB에 설치합니다..\n</li>\n\n<li>설치하는 USB는 포맷이 되며 모든 데이터는 삭제 될겁니다.</li>\n\n<li>현재 사용 중인 Tails USB의 암호화된 영구 저장소가 복사되지 않았습니다.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>다른 Tails USB를 사용중인 Tails 버젼으로 업그레이드 합니다.\n</li>\n\n<li>USB내의 암호화된 영구 저장소는 사라지지 않습니다.</li>\n\n<li>현재 사용 중인 Tails USB의 암호화된 영구 저장소는 복사되지 않습니다.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>다른 Tails USB를 ISO파일의 버젼으로 업그레이드 합니다.\n</li>\n\n<li>USB내의 암호화된 영구 저장소는 사라지지 않습니다.</li>\n\n<li>현재 사용 중인 Tails USB의 암호화된 영구 저장소가 복사되지 않습니다.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "찾아보기"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "USB 메모리의 여분의 공간을 퍼시스턴트 구역에 할당하여, 데이터를 저장하고, Live 운영 체제의 변경 사항을 저장할 수 있습니다. 비활성화 할 경우 매 회 재부팅/종료 때마다 변경된 데이터가 손실됩니다."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s의 SHA1 계산 중"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "오류: Live CD의 SHA1이 잘못되어 있습니다. 이러한 프로그램을 --noverify 인수와 함께 실행하여 유효성 검사를 해결할 수 있습니다. "
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "찾을 수 없음"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "알 수 없는 ISO 체크섬 검증을 생략합니다"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "%s 장치를 찾을 수 없음 "
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "디바이스에 여유공간이 없습니다.\n%dMB ISO + %dMB 이상 > %dMB 여유 공간"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMB 퍼시스턴트 구역을 작성 중"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "장치가 아직 마운트되지 않기 때문에 공간을 측정 할 수 없습니다."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s 다운로드"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "다운로드 완료! "
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "%(infile)s를 %(outfile)s에 복사 할 수 없습니다 : %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "다운로드 실패: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "기존 LiveOS을 삭제 중"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s 다운로드 중... "
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "드라이브가 루프백입니다. MBR 재설정을 건너 뜁니다."
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "%(file)s를 chmod할 수 없습니다: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "'%(device)s'에 unmount_device를 입력 중"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "장치를 엄격하게 조사하는 동안 오류"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "오류: 레이블을 설정할 수 없거나 장치의 UUID를 검색할 수 없습니다. 계속 진행할 수 없습니다. "
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "오류: Live CD의 SHA1이 잘못되어 있습니다. 이러한 프로그램을 --noverify 인수와 함께 실행하여 유효성 검사를 해결할 수 있습니다. "
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "대상 장치에 라이브 이미지를 추출 중..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "이전 LiveOS에서 파일을 삭제할 수 없습니다 : %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s를 FAT32로 포맷 중"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO의 MD5 유효성 검사를 통과하였습니다"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "이전 LiveOS에서 디렉토리를 삭제할 수 없습니다 : %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO의 MD5 유효성 검사를 실패했습니다"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "%s 장치를 찾을 수 없음 "
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "기존 Live ISO를 선택하지 않으면 선택된 자료가 당신을 위해 다운로드됩니다."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "%(device)s에 쓸 수 없습니다. 스킵합니다."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "설치\n복제해서"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "대상 장치 %(device)s 파티션의 일부가 마운트되었습니다. 설치 프로세스가 시작하기 전에 이들은 마운트 해제됩니다."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails 설치"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "알 수없는 파일 시스템. 장치를 다시 포맷해야할지도 모릅니다."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "다운로드 완료! "
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "지원되지 않는 파일 시스템: %s "
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "설치 완료! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "설치가 완료되었습니다. 프로그램을 종료하려면 확인을 누르십시오."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "장치를 마운트 할 수 없습니다: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "부트 로더를 설치 중..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "마운트 포인트를 찾을 수 없습니다."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "%(pretty_name)s 는 Tails Installer로 설치되지 않았으므로 업그레이드할 수 없습니다. %(action)s 를 통해 업그레이드해 주시기 바랍니다."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB 생성 실패! "
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "'%(device)s'에 unmount_device를 입력 중"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "이 프로그램을 실행하기 전에 liveusb-creator zip 파일 전체를 배포했는지 여부를 확인하십시오."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "%(device)s에 마운트 된 파일 시스템을 마운트 해제 중"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB 키가 연결되어 FAT 파일 시스템으로 포맷되어 있는지 확인 "
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "%(device)s에 '%(udi)s'를 분리 중"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "마운트 해제 후 %s의 실체를 마운트"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "장치%(device)s 에 충분한 공간이 없습니다."
+msgid "Partitioning device %(device)s"
+msgstr "장치 %(device)s의 파티션을 구성 중"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "마운트 포인트를 찾을 수 없습니다."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "%(system_partition)s 시스템 파티션의 속성을 업데이트합니다."
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "디바이스에 여유공간이 없습니다.\n%dMB ISO + %dMB 이상 > %dMB 여유 공간"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "지원되지 않는 장치 '%(device)s', 버그를 보고하십시오."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "FAT16형식으로 포맷하며, 파티션의 크기는 2GB로 제한됩니다. "
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "어쨌든간에 계속하기."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "파티션은 FAT32입니다. 4G에 오버레이 크기를 제한합니다."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "파일 시스템 확인 중... "
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "장치 %(device)s의 파티션을 구성 중"
+msgid "Unable to change volume label: %(message)s"
+msgstr "볼륨 레이블을 변경할 수 없습니다: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "퍼시스턴트 저장소"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "부트 로더를 설치 중..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "퍼시스턴트 저장소 (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "장치를 확인하시기 바랍니다."
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)s를 삭제 중"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "자료 업데이트 중..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s는 이미 부팅 가능합니다"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "자료가 업데이트되었습니다!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "파티션을 찾을 수 없습니다."
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s를 삭제 중"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s를 FAT32로 포맷 중"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "기존 LiveOS을 삭제 중"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "%s의 마스터 부트 레코드를 재설정 중"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO 선택 "
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC 부팅 파일을 설정합니다 ..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "드라이브가 루프백입니다. MBR 재설정을 건너 뜁니다."
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "대상 장치 %(device)s 파티션의 일부가 마운트되었습니다. 설치 프로세스가 시작하기 전에 이들은 마운트 해제됩니다."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "소스 타입은 ISO의 MD5 체크섬 유효성 검사를 지원하지 않습니다 스킵합니다"
+msgid "Calculating the SHA1 of %s"
+msgstr "%s의 SHA1 계산 중"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "디스크의 데이터를 동기화 중..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "대상 드라이브"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "장치를 엄격하게 조사하는 동안 오류"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "선택된 장치 \"%(pretty_name)s\" 의 용량이 모자라서 Tail를 설치할 수 없습니다 (최소 %(size)s GB 필요) "
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "지원되는 장치를 찾을 수 없습니다."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "선택된 파일은 읽을 수 없습니다. 권한을 수정하거나 다른 파일을 선택하십시오."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB 키가 연결되어 FAT 파일 시스템으로 포맷되어 있는지 확인 "
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "다음 명령의 실행에 문제가있었습니다 : `%(command)s`.\n자세한 오류 로그 '%(filename)s'에 적혀 있습니다."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "지원되지 않는 파일 시스템: %s\nUSB 키를 FAT 파일 시스템으로 백업 및 포맷하십시오. "
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "이 버튼을 누르면 이전에 다운로드 한 기존 Live system ISO를 참조 할 수 있습니다. 이 중 하나를 선택하지 않으면 릴리스가 자동으로 당신을 위해 다운로드됩니다."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk를 사용할 수 없습니다. win32com 쿼리가 어떠한 결과도 반환하지 않았습니다."
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "이 버튼은 LiveUSB 만드는 과정을 시작합니다. 이 작업은 임의로 릴리스 다운로드 (기존의 것이 선택되지 않은 경우) 하고, 다운로드받은 ISO 파일을 USB 장치에 추출하고, 퍼시스턴트 저장소를 만든 후 부트 로더를 설치할 것입니다."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "찾을 수 없음"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "이것은 당신이 Live system을 설치하려는 USB 메모리입니다. 이 장치는 FAT 파일 시스템으로 포맷되어 있어야합니다."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "알 수 없는 자료: %s "
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s 다운로드 중... "
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "이것은 LiveUSB 만드는 과정의 진척 률을 나타내는 진행률 표시 줄입니다"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "오류: 레이블을 설정할 수 없거나 장치의 UUID를 검색할 수 없습니다. 계속 진행할 수 없습니다. "
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "여기는 상태 콘솔입니다. 모든 메시지가 여기에 기록됩니다."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "설치 완료! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "어쨌든간에 계속하기."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB 드라이브 인식"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "경고 : 이 프로그램을 실행하기 위해 관리자 권한으로 전환해야 합니다. 아이콘을 오른쪽 마우스로 클릭하여 속성으로 들어간 후, 호환성 탭에서 \"관리자 권한으로 프로그램 실행\"을 체크해 주세요."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "볼륨 레이블을 변경할 수 없습니다: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "%(file)s를 chmod할 수 없습니다: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "%(infile)s를 %(outfile)s에 복사 할 수 없습니다 : %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "USB드라이브를 찾을 수 없습니다."
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "선택된 장치 \"%(pretty_name)s\" 의 용량이 모자라서 Tail를 설치할 수 없습니다 (최소 %(size)s GB 필요) "
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "지원되는 장치를 찾을 수 없습니다."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "파티션을 찾을 수 없습니다."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "ISO로 설치"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk를 사용할 수 없습니다. win32com 쿼리가 어떠한 결과도 반환하지 않았습니다."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "%(pretty_name)s 는 Tails Installer로 설치되지 않았으므로 업그레이드할 수 없습니다. %(action)s 를 통해 업그레이드해 주시기 바랍니다."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "자료 업데이트 중..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "자료가 업데이트되었습니다!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "다운로드 완료! "
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "장치를 구성할 수 없습니다."
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "장치를 마운트 할 수 없습니다: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "장치를 확인하시기 바랍니다."
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "이전 LiveOS에서 디렉토리를 삭제할 수 없습니다 : %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "%(size)s%(vendor)s%(model)s장치(%(device)s)에 Tails를 설치합니다. 선택된 장치 안의 모든 데이터가 없어집니다. 계속하시겠습니까?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "이전 LiveOS에서 파일을 삭제할 수 없습니다 : %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "%(parent_size)s %(vendor)s %(model)s 장치 (%(device)s) Tails를 업그레이드 합니다. 퍼시스턴트 볼륨은 변경되지 않은 채 유지됩니다. 계속 하시겠습니까?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "다운로드 완료! "
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "다운로드 실패: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "다운로드를 다시 시작할 수 있습니다 "
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR을 재설정 할 수 없습니다. `syslinux`패키지를 설치하지 않을지도 모릅니다."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "선택된 파일은 읽을 수 없습니다. 권한을 수정하거나 다른 파일을 선택하십시오."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "지정된 파일을 사용할 수 없으니 루트 디렉토리에 ISO 파일을 이동시키십시오. (예 : C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "%(device)s에 쓸 수 없습니다. 스킵합니다."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "알 수 없는 ISO 체크섬 검증을 생략합니다"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "장치의 마운트를 시도 중 알 수없는 dbus 예외: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s 선택됨"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "알 수없는 파일 시스템. 장치를 다시 포맷해야할지도 모릅니다."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "알 수 없는 자료: %s "
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "%(device)s에 '%(udi)s'를 분리 중"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "%(device)s에 마운트 된 파일 시스템을 마운트 해제 중"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "지원되지 않는 장치 '%(device)s', 버그를 보고하십시오."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "지원되지 않는 파일 시스템: %s "
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "지원되지 않는 파일 시스템: %s\nUSB 키를 FAT 파일 시스템으로 백업 및 포맷하십시오. "
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "%(system_partition)s 시스템 파티션의 속성을 업데이트합니다."
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "복사해서\n업그레이드"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails 설치"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "ISO에서 \n업그레이드"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "기존 Live system ISO를 사용"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO를 MD5 체크섬을 확인합니다"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "LiveCD 이미지 SHA1 체크섬 확인 중 ..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "LiveCD 이미지 SHA256 체크섬 확인 중 ..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "파일 시스템 확인 중... "
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "경고: 새로운 퍼시스턴트 구역을 생성할 경우 기존에 있던 구역은 삭제됩니다. "
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "경고 : 이 프로그램을 실행하기 위해 관리자 권한으로 전환해야 합니다. 아이콘을 오른쪽 마우스로 클릭하여 속성으로 들어간 후, 호환성 탭에서 \"관리자 권한으로 프로그램 실행\"을 체크해 주세요."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "%(speed)d MB/초로 장치에 기록되었습니다"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "%(size)s%(vendor)s%(model)s장치(%(device)s)에 Tails를 설치합니다. 선택된 장치 안의 모든 데이터가 없어집니다. 계속하시겠습니까?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "%(parent_size)s %(vendor)s %(model)s 장치 (%(device)s) Tails를 업그레이드 합니다. 퍼시스턴트 볼륨은 변경되지 않은 채 유지됩니다. 계속 하시겠습니까?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "ext4 파일 시스템을 지원하지 않는 syslinux-extlinux의 이전 버전을 사용하고 있습니다."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "다운로드를 다시 시작할 수 있습니다 "
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "루트에서 이 응용프로그램을 실행해야 합니다."
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "또는"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ko_KR/ko_KR.po b/ko_KR/ko_KR.po
index 2a51304..ee7588e 100644
--- a/ko_KR/ko_KR.po
+++ b/ko_KR/ko_KR.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Korean (Korea) (http://www.transifex.com/otf/torproject/language/ko_KR/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: ko_KR\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s이(가) 선택됨."
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "찾아보기"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "설치된 라이브 OS 제거 중"
+
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr ""
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "마운트 지점을 찾을 수 없습니다."
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr ""
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "테일즈 설치"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "설치 완료!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "설치가 완료되었습니다. 확인을 눌러 프로그램을 종료하세요."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "부트로더 설치중..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "라이브USB 생성 실패!"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)s 제거 중"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:588
-#, python-format
-msgid "No free space on device %(device)s"
-msgstr "%(device)s에 여유공간이 없습니다."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "마운트 지점을 찾을 수 없습니다."
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "선택한 장치를 확인해 주십시오."
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "새 릴리즈 확인 중..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "새 릴리즈 확인!"
-
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
-#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s 제거 중"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "설치된 라이브 OS 제거 중"
-
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "라이브 ISO 선택"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr ""
-
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:438
-#, python-format
+#: ../tails_installer/creator.py:1477
msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:73
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:204
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:504
+#, python-format
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "새 릴리즈 확인 중..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "새 릴리즈 확인!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "설치 완료!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "선택한 장치를 확인해 주십시오."
+
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to mount device: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr ""
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s이(가) 선택됨."
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "테일즈 설치"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ku/ku.po b/ku/ku.po
index 53c575c..38bf5b6 100644
--- a/ku/ku.po
+++ b/ku/ku.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kurdish (http://www.transifex.com/otf/torproject/language/ku/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ku\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ku_IQ/ku_IQ.po b/ku_IQ/ku_IQ.po
index d651ea3..6272a32 100644
--- a/ku_IQ/ku_IQ.po
+++ b/ku_IQ/ku_IQ.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-09-16 19:56+0000\n"
-"Last-Translator: Rasti K5 <rasti.khdhr at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kurdish (Iraq) (http://www.transifex.com/otf/torproject/language/ku_IQ/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: ku_IQ\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Cannot find device %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr ""
-
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Download %(distribution)s"
-msgstr ""
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "داگرتنەکە تەواو بوو!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:513
#, python-format
-msgid "Downloading %s..."
-msgstr ""
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr ""
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:213
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "دامەزراندن تەواو بوو!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:859
-#, python-format
-msgid "Mount %s exists after unmounting"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "هیچ شوێنێکی بەتاڵ نەماوەتەوە لەسەر ئامێری %(device)s"
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/creator.py:354
-#, python-format
+#: ../tails_installer/gui.py:204
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "دامەزراندن تەواو بوو!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "داگرتنەکە تەواو بوو!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "یان"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/kw/kw.po b/kw/kw.po
index 348117e..4700d98 100644
--- a/kw/kw.po
+++ b/kw/kw.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Cornish (http://www.transifex.com/otf/torproject/language/kw/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: kw\n"
"Plural-Forms: nplurals=4; plural=(n==1) ? 0 : (n==2) ? 1 : (n == 3) ? 2 : 3;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ky/ky.po b/ky/ky.po
index fb69514..f431576 100644
--- a/ky/ky.po
+++ b/ky/ky.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Kyrgyz (http://www.transifex.com/otf/torproject/language/ky/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ky\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/la/la.po b/la/la.po
index 57d8967..17103f2 100644
--- a/la/la.po
+++ b/la/la.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-09-29 14:00+0000\n"
-"Last-Translator: Alisa P <parashchenko.alisa at yandex.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Latin (http://www.transifex.com/otf/torproject/language/la/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: la\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Duplicare et inponere\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Ex ISO inponere\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Imago \"live\" ad apparatum finis trahitur..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s inpositor"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s electus"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Sententiae initii OLPC sistitur..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Problema actione eius imperii erat: \"%(command)s\".\nScriptum vitium maior ad \"%(filename)s\" scriptum est."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s iam inire potest"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Egesne auxilium? Lege <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentationem</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Inpone Caudas in axe USB alio duplicando Caudas systematem, quam usas..</li>\n\n<li>Axis USB, quo inpones, sine forma et informatione erit.</li>\n\n<li>Memoria manens lateta axis USB Caudis, quom usas, duplicata non est.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Muta axem USB alium ad versionem Caudarum, quam nunc usas.</li>\n\n<li>Memoria manens lateta axis USB, quam mutas, manebit.</li>\n\n<li>Memoria manens lateta axis USB Caudis, quom usas, duplicata non est.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Muta axem USB alium ad versionem imaginis ISO.</li>\n\n<li>Memoria manens lateta axis USB, quam mutas, manebit.</li>\n\n<li>Memoria manens lateta axis USB Caudis, quom usas, duplicata non est.</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navigare"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Datione loci additionalis pro memoria manente, poteris informationem habere et si systema actionum mutas, manet. Sine eo facto informatio post reinitium non iam erit."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Reor SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Vitium: SHA1 de tuo \"Live CD\" valida non est. Programma --noverify adscripto — verificationem non facit — agere potes."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Invenire non possum"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "%s apparatum invenire non possum"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Parvior locorum liberum in apparatu.\n%dMB ISO + %dMB orden super > %dMB loci liberi"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMB memoria manens creatur"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Apparatus adhuc nescitus est, itaque locum liberum reri non possumus."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s acquirere"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Acquisitio facta!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Non possum %(infile)s ad %(outfile)s transscribere: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Acquistus non est:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "\"Live OS\" existens deletur"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s acquiritur..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "\"Drive\" est repositio de MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Non possum \"chmod\" facere ad %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Indatur unmount_device pro '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Vitium apparet probans apparatum"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Vitium: Notam sistere aut UUID apparatus acquirere non possum. Continuare non possum."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Vitium: SHA1 de tuo \"Live CD\" valida non est. Programma --noverify adscripto — verificationem non facit — agere potes."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Imago \"live\" ad apparatum finis trahitur..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Non possum sententias de LiveOS anteo delere: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Forma %(device)s datur ut FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 summa probatione passa est"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Non possum ordinem de LiveOS anteo delere: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 verificatio summa probatone falsa erat"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "%s apparatum invenire non possum"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Nisi \"Live ISO\" existentem eligis, programma electa tibi acquiretur."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "In %(device)s scribere non possum, non facitur."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Inponere\nduplicatione"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Nonnullae partes apparatus finis %(device)s sciti sunt. Nesciti erint ante inpositionem."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Caudas inponere"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Inpositio facta!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Inpositio facta! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Inpositio facta. Preme \"Intellexi\", ut programma claudetur."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Apparatus scire non possum: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Acquiritur initiator..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Puncti scientiae inveniti non sunt"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Non potest apparatum %(pretty_name)s mutare, quia non de inpositore Caudarum factus est. Pro eo %(action)s usare debes."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB creatus non est!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Indatur unmount_device pro '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Extrahe totas sententias ZIP \"liveusb-creator\" ante initium programmatis."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB clavis tua in portu esse et formam FAT habere debet"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Scire %s post nescitionem existit"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Loci liberi in apparatu %(device)s desunt"
+msgid "Partitioning device %(device)s"
+msgstr "Partes apparatus %(device)s facitur"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Puncti scientiae inveniti non sunt"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Parvior locorum liberum in apparatu.\n%dMB ISO + %dMB orden super > %dMB loci liberi"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partes sunt FAT16, magnitudo ordinis superi maxime 2G sit"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Adhuc continuare probatur"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partes sunt FAT32, magnitudo ordinis superi maxime 4G sit"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partes apparatus %(device)s facitur"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Notam voluminis mutare non possum: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Memoria manens"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Acquiritur initiator..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Memoria manens (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Reaccipe electionem apparatus"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Deletur %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Programmata renovatur..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s iam inire potest"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Programmata renovata sunt!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Partes invenire non possum"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Deletur %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Forma %(device)s datur ut FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "\"Live OS\" existens deletur"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "\"Master Boot Record\" de %s reponitur"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Elige \"Live ISO\""
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Sententiae initii OLPC sistitur..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "\"Drive\" est repositio de MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Nonnullae partes apparatus finis %(device)s sciti sunt. Nesciti erint ante inpositionem."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Classem fontis verificare summa probationis ISO MD5 non potest, non facitur."
+msgid "Calculating the SHA1 of %s"
+msgstr "Reor SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Informatio ad tempus aequle ponitur"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Apparatus finis"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Vitium apparet probans apparatum"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Apparatus \"%(pretty_name)s\" parvior pro inpositione Caudarum est (minime %(size)s GB egetur)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nulli apparatus, qui usare possum, invenire possum"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Sententias electas legere non licet. Muta licentiam legendi aut elige sententias alias."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB clavis tua in portu esse et formam FAT habere debet"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Problema actione eius imperii erat: \"%(command)s\".\nScriptum vitium maior ad \"%(filename)s\" scriptum est."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Eo circulo tibi \"Live system ISO\" iam acquisitum quaerere licet. Si non eligisti, una versio tibi per ipse acquiretur."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Non possum Win32_LogicalDisk arcessere; win32com quaestio responsa nulla dedit"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Is circulum creationem de LiveUSB init. In eo sunt acquisitio versionis (si existens electa non est), extractio sententiarum ISO ad apparatum USB, creatio memoriae manentis, inpositio initiatoris."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Invenire non possum"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Hic est axis USB, ubi systema Live inponere vis. Apparatus in FAT forma esse debet."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s acquiritur..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Hic est axis progressionis, quod ostendit, ubi in processu creationis de LiveUSB es"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Vitium: Notam sistere aut UUID apparatus acquirere non possum. Continuare non possum."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "HIc scriptum positionis est, quo nuntii scripti sunt."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Inpositio facta! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Adhuc continuare probatur"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Apparatus USB inventus"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Notam voluminis mutare non possum: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Non possum \"chmod\" facere ad %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Non possum %(infile)s ad %(outfile)s transscribere: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nulli apparatus USB invenire possum"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Apparatus \"%(pretty_name)s\" parvior pro inpositione Caudarum est (minime %(size)s GB egetur)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nulli apparatus, qui usare possum, invenire possum"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Partes invenire non possum"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Ex ISO inponere\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Non possum Win32_LogicalDisk arcessere; win32com quaestio responsa nulla dedit"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Non potest apparatum %(pretty_name)s mutare, quia non de inpositore Caudarum factus est. Pro eo %(action)s usare debes."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Programmata renovatur..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Programmata renovata sunt!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Inpositio facta!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Apparatus scire non possum"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Apparatus scire non possum: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Reaccipe electionem apparatus"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Non possum ordinem de LiveOS anteo delere: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Non possum sententias de LiveOS anteo delere: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Acquisitio facta!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Acquistus non est:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR reponere non possum. Fortasse \"syslinux\" collationem sententiarum non habes."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Sententias electas legere non licet. Muta licentiam legendi aut elige sententias alias."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Sententias electas usare non possum. Fortasse poterim, si ISO ad radicem apparatus (est C:\\) moves."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "In %(device)s scribere non possum, non facitur."
+msgid "%(filename)s selected"
+msgstr "%(filename)s electus"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Caudas inponere"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "aut"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/lb/lb.po b/lb/lb.po
index 6b5871a..2ffc864 100644
--- a/lb/lb.po
+++ b/lb/lb.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-06 20:37+0000\n"
-"Last-Translator: Tyler Durden <virii at enn.lu>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Luxembourgish (http://www.transifex.com/otf/torproject/language/lb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: lb\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonen & Installéieren\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Dës Applikatioun muss als root ausgefouert ginn"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Vun der ISO installéieren\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Live Image op Zil Medium extrahéieren..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installéierprogramm"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Mat %(speed)d MB/sek op d'Medium geschriwwen"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ausgewielt"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC boot Datei gëtt ageriicht..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Et gouf e Problem beim ausféiere vu folgendem Kommando: `%(command)s`.\nEng méi detailléiert Feelerlogdatei gouf an '%(filename)s' geschriwwen."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "SHA1 Checkzomm vun der LiveCD verifizéieren..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ass schonns bootbar"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "SHA256 Checkzomm vun der LiveCD verifizéieren..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Hëllef? Lies d' <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">Dokumentatioun</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n\n<li>Installéier Tails op engem aneren USB Stick an deem s de den Tails System deen grad leeft kopéiers...</li>\n\n\n<li>Den USB Stick dee s de benotzt fir ze installéieren ass formatéiert an all Daten si verluer.</li>\n\n\n<li>Déi verschlësselt a persistent Daten vum Tails USB Stick deen s de grad benotz ginn net kopéiert.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade een aneren Tails USB Stick op déi selwecht Tails Versioun wéi déi, déi grad leeft.</li>\n\n<li>Déi verschlësselt a persistent Date vum Tails USB Stick deen s de upgrades gi gehalen.</li>\n\n<li>Déi verschlësselt a persistent Daten vum Tails USB Stick deen s du grad benotz, ginn net kopéiert.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade een aneren Tails USB Stick op d'Versioun vun enger ISO.</li>\n\n<li>Déi verschlësselt a persistent Date vum Tails USB Stick deen s de upgrades gi gehalen.</li>\n\n<li>Déi verschlësselt a persistent Daten vum Tails USB Stick deen s du grad benotz, ginn net kopéiert..</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Duerchsichen"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "An deem s de extra Späicherplaz op dem USB Stick fräi gëss, kanns de ee persistente Späicher kreéiere wou s de d'Méiglechkeet hues Daten sou wei Verännerunge vun Tails permanent ze späicheren. Ouni des Funktioun sinn all Daten no engem Neistart geläscht."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "SHA1 Zomm vun %s gëtt berechent"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Feeler: SHA1 Checkzomm vun der Live CD ass falsch. Dir kennt dëst Programm mat dem --noverify Argument starten em de Verifikatiounscheck ze ëmgoen."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kann net fonnt ginn"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Onbekannten ISO, Checkzomm Verifikatioun gëtt iwwersprongen"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Kann d'Maschinn %s net fannen"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Net genuch fräi Späicherplaz op dem Medium.\n%dMB ISO + %dMB Späicherplaz benéidegt > %dMB fräie Späicher"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMB u persistenter Späicherplaz goufen erstallt."
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "D'Medium gouf nach net agehaangen, sou datt déi fräi Späicherkapazitéit net konnt ermëttelt ginn."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s erof lueden"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download fäerdeg!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kopéiere vun %(infile)s no %(outfile)s ass schif gaangen: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download feel geschloen"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Läschen existéierend Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s gëtt erofgelued"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "D'Lafwierk ass e Loopback, MBR zerécksetze gëtt iwwersprongen"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod vun %(file)s net méiglech: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "unmount_devide fir '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Feeler beim iwwerpréiwe vum Späichermedium"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Feeler: Kann d'Bezeechnung oder UUID vum Medium net ermëttelen. Weiderfueren ass net méiglech."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Feeler: SHA1 Checkzomm vun der Live CD ass falsch. Dir kennt dëst Programm mat dem --noverify Argument starten em de Verifikatiounscheck ze ëmgoen."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Live Image op Zil Medium extrahéieren..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Datei vum leschte LiveOS konnt net geläscht ginn: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s gëtt als FAT32 formatéiert."
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 Checkzomm ass richteg"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Verzeechnes vum leschte LiveOS konnt net geläscht ginn: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 Checkzomm Verifikatioun ass feelgeschloen."
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Kann d'Maschinn %s net fannen"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Wann keng existent Live ISO ausgewielt gouf, dann gëtt déi ausgewielten Versioun fir iech erofgelueden."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Net méiglech op %(device)s ze schreiwen, iwwersprangen."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Duerch klonen\ninstalléieren"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "E puer Partitioune vum ausgewielte Medium %(device)s si gemount. Se wäerten ausgehaange ginn ier den Installatiounsprozess ufänkt."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails installéieren"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Onbekanntent Dateisystem. D'Medium muss néi formatéiert ginn."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installatioun ofgeschloss!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Dateisystem net ënnerstëtzt: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installatioun ofgeschloss! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "D'Installatioun ass fäerdeg! Dréckt OK fir dëst Programm zou ze maachen."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Medium konnt net agehaangen ginn: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Bootloader gëtt installéiert..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Keng Plaz zum Mounten fonnt"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Et ass net méiglech d'Medium %(pretty_name)s ze upgrade well et net mam Tails Installer erstallt gouf. Dir sollt dofir amplaz %(action)s benotze fir Tails op dësem Medium ze upgraden."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB-Erstellung ass schif gaang!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "unmount_devide fir '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Stellt sécher, datt déi ganz LiveUSB-Creator ZIP Datei entpak gouf, ier der dëst Programm start."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Aushänke vum agehaangenem Dateisystem op '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Stellt sécher, datt den USB Stick agestach ass an FAT formatéiert ass"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Aushänke vu '%(udi)s' op '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount %s existéiert nach no dem aushänken."
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Keng fräi Späicherplaz op dem Medium %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Späichermedium %(device)s gëtt partitionéiert"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Keng Plaz zum Mounten fonnt"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Astellunge vun der System Partitioun %(system_partition)s gi geupdatet"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Net genuch fräi Späicherplaz op dem Medium.\n%dMB ISO + %dMB Späicherplaz benéidegt > %dMB fräie Späicher"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Medium net ënnerstëtzt '%(device)s'. Mellt wann ech gelift de Feeler."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partitioun ass FAT16; Dateigréisst ass op 2GB beschränkt."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Versichen trotzdem weider ze maachen."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partitioun ass FAT32; Dateigréisst ass op 4GB beschränkt."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Dateisystem verifizéieren..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Späichermedium %(device)s gëtt partitionéiert"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Ännerung vun der Volumebeschreiwung net méiglech: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistent Späicherplaz"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Bootloader gëtt installéiert..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Persistent Späicherplaz (0MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bestätegt wann ech gelift är Wiel"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Läschen %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Verëffentlechunge ginn aktualiséiert."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ass schonns bootbar"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Verëffentlechunge goufen aktualiséiert!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Et gouf keng Partitioun fonnt"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Läschen %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s gëtt als FAT32 formatéiert."
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Läschen existéierend Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Master Boot Record vun %s gëtt zeréck gesat"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO auswielen"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC boot Datei gëtt ageriicht..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "D'Lafwierk ass e Loopback, MBR zerécksetze gëtt iwwersprongen"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "E puer Partitioune vum ausgewielte Medium %(device)s si gemount. Se wäerten ausgehaange ginn ier den Installatiounsprozess ufänkt."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Quellentyp ënnerstëtzt keng Verifikatioun vun enger ISO MD5 Checkzomm, iwwersprangen"
+msgid "Calculating the SHA1 of %s"
+msgstr "SHA1 Zomm vun %s gëtt berechent"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Daten op dem Disk gi synchroniséiert..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Zilmedium"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Feeler beim iwwerpréiwe vum Späichermedium"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "D'Medium \"%(pretty_name)s\" ass ze kleng fir Tails dorobber ze installéieren (et ginn op mannst %(size)s GB gebraucht)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Et konnt kee Medium fonnt gi wat ënnerstëtzt gëtt"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Déi ausgewielten Datei ass net liesbar. Ännert wann ech gelift är Berechtegungen oder wielt eng aner Datei aus."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Stellt sécher, datt den USB Stick agestach ass an FAT formatéiert ass"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Et gouf e Problem beim ausféiere vu folgendem Kommando: `%(command)s`.\nEng méi detailléiert Feelerlogdatei gouf an '%(filename)s' geschriwwen."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Dateisystem net ënnerstëtzt: %s\nMacht ee Backup a formatéiert den USB Stick mat dem FAT Dateisystem."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Dëse Knäppchen erlaabt et iech eng Live system ISO auszewielen. Wa keng ausgewielt gëtt, wäert automatesch e Release erofgeluede ginn."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk konnt net ermëttelt ginn; de win32com Opruff huet keng Resultater bruecht."
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Dëse Knäppche start de LiveUSB Kreatiounsprozess. Dat beinhalt en optionalt erofluede vun engem Release (wa keent ausgewielt gouf), d'entpake vun der ISO op en USB Stick, Kreatioun vun engem persistente Späicher an d'Installatioun vum Bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kann net fonnt ginn"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dat ass den USB Stick op deem dir de Live system wëllt installéieren. D'Medium muss FAT formatéiert sinn."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Onbekannt release: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s gëtt erofgelued"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dat ass d'Fortschrëttsbar déi uweist wei wäit de LiveUSB Prozess am Moment ass"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Feeler: Kann d'Bezeechnung oder UUID vum Medium net ermëttelen. Weiderfueren ass net méiglech."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dëst ass d'Statuskonsol wou all d'Noriichten hi geschriwwe ginn."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installatioun ofgeschloss! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Versichen trotzdem weider ze maachen."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB Medium fonnt"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Warnung: Dëst Tool muss als Administrateur ausgefouert ginn. Fir dat ze maachen, musst der op der Maus op den Icon riets klicken an dann d'Astellungen auswielen. Ënnert dem Reider \"Kompatibilitéit\", wielt der dann \"Dëst Programm als Administrateur ausféieren\" aus."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Ännerung vun der Volumebeschreiwung net méiglech: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod vun %(file)s net méiglech: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kopéiere vun %(infile)s no %(outfile)s ass schif gaangen: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Keen USB Späichermedium fonnt"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "D'Medium \"%(pretty_name)s\" ass ze kleng fir Tails dorobber ze installéieren (et ginn op mannst %(size)s GB gebraucht)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Et konnt kee Medium fonnt gi wat ënnerstëtzt gëtt"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Et gouf keng Partitioun fonnt"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Vun der ISO installéieren\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk konnt net ermëttelt ginn; de win32com Opruff huet keng Resultater bruecht."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Et ass net méiglech d'Medium %(pretty_name)s ze upgrade well et net mam Tails Installer erstallt gouf. Dir sollt dofir amplaz %(action)s benotze fir Tails op dësem Medium ze upgraden."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Verëffentlechunge ginn aktualiséiert."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Verëffentlechunge goufen aktualiséiert!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installatioun ofgeschloss!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Medium konnt net agehaange ginn"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Medium konnt net agehaangen ginn: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bestätegt wann ech gelift är Wiel"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Verzeechnes vum leschte LiveOS konnt net geläscht ginn: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Dir sidd dobäi Tails op %(size)s %(vendor)s %(model)s d'Medium (%(device)s) ze installéieren. All Daten op dem ausgewielte Medium gi verluer. Weiderfueren?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Datei vum leschte LiveOS konnt net geläscht ginn: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Dir sidd dobäi Tails op %(parent_size)s %(vendor)s %(model)s dem Medium (%(device)s) ze upgraden. Jiddwer persistente Späicher op dësem Medium bleift onverännert. Weiderfueren?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download fäerdeg!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download feel geschloen"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Download probéieren ze resuméieren"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR konnt net zeréck gesat ginn. `syslinux` Pak ass vläicht net installéiert."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Déi ausgewielten Datei ass net liesbar. Ännert wann ech gelift är Berechtegungen oder wielt eng aner Datei aus."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Net méiglech déi ausgewielten Datei ze benotzen. Dir hutt wuel méi Gléck wann dir är ISO direkt an engem Lafwierk ofleet (zB: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Net méiglech op %(device)s ze schreiwen, iwwersprangen."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Onbekannten ISO, Checkzomm Verifikatioun gëtt iwwersprongen"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Onbekannten dbus Exceptioun während dem unhänke vum Medium: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s ausgewielt"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Onbekanntent Dateisystem. D'Medium muss néi formatéiert ginn."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Onbekannt release: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Aushänke vu '%(udi)s' op '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Aushänke vum agehaangenem Dateisystem op '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Medium net ënnerstëtzt '%(device)s'. Mellt wann ech gelift de Feeler."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Dateisystem net ënnerstëtzt: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Dateisystem net ënnerstëtzt: %s\nMacht ee Backup a formatéiert den USB Stick mat dem FAT Dateisystem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Astellunge vun der System Partitioun %(system_partition)s gi geupdatet"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Upgraden\nmat klonen"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails installéieren"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Upgrade\nvun ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Existéierend Live System ISO benotzen"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 Checkzomm verifizéieren"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "SHA1 Checkzomm vun der LiveCD verifizéieren..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "SHA256 Checkzomm vun der LiveCD verifizéieren..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Dateisystem verifizéieren..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Warnung: D'Erstelle vun engem neie persistente Späicher wäert äre momentane läschen."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Warnung: Dëst Tool muss als Administrateur ausgefouert ginn. Fir dat ze maachen, musst der op der Maus op den Icon riets klicken an dann d'Astellungen auswielen. Ënnert dem Reider \"Kompatibilitéit\", wielt der dann \"Dëst Programm als Administrateur ausféieren\" aus."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Mat %(speed)d MB/sek op d'Medium geschriwwen"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Dir sidd dobäi Tails op %(size)s %(vendor)s %(model)s d'Medium (%(device)s) ze installéieren. All Daten op dem ausgewielte Medium gi verluer. Weiderfueren?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Dir sidd dobäi Tails op %(parent_size)s %(vendor)s %(model)s dem Medium (%(device)s) ze upgraden. Jiddwer persistente Späicher op dësem Medium bleift onverännert. Weiderfueren?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Dir benotzt eng al Versioun vu syslinux-extlinux, déi den ext4 Dateisystem net ënnerstëtzt"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Download probéieren ze resuméieren"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Dës Applikatioun muss als root ausgefouert ginn"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "oder"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/lg/lg.po b/lg/lg.po
index 0d5120b..33bf9f1 100644
--- a/lg/lg.po
+++ b/lg/lg.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Ganda (http://www.transifex.com/otf/torproject/language/lg/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: lg\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ln/ln.po b/ln/ln.po
index 8c569a3..0cd553a 100644
--- a/ln/ln.po
+++ b/ln/ln.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Lingala (http://www.transifex.com/otf/torproject/language/ln/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ln\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/lo/lo.po b/lo/lo.po
index 5733b32..f9e58b6 100644
--- a/lo/lo.po
+++ b/lo/lo.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-05-23 14:10+0000\n"
-"Last-Translator: Sisouvan Sangbouaboulom <sisouvan at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Lao (http://www.transifex.com/otf/torproject/language/lo/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: lo\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"ໂຄລນ & ຕິດຕັ້ງ\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "ທ່ານຕ້ອງ ແລ່ນ ແອັບ ນີ້ ໃນນາມ root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ຕິດຕັ້ງຈາກ ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "ຕິດຕັ້ງ %(distribution)s "
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "ຂຽນລົງອຸປະກອນນີ້ ໃນອັດຕາຄວາມໄວ %(speed)d MB/ວິນາທີ"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ຖືກເລືອກແລ້ວ"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "ກໍາລັງຕັ້ງຄ່າ ຟາຍລ໌ ບຸດຕ໌ OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s ພ້ອມທີ່ຈະບຸດຕ໌ໄດ້ແລ້ວ"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
+
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ດາວໂຫຼດ ສຳເລັດ!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ດາວໂຫຼດ ລົ້ມເຫຼວ:"
-
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "ກຳລັງດາວໂຫຼດ %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "ຜິດພາດ: ບໍ່ສາມາດກໍາປ້າຍຊື່ ຫຼື ໄດ້ຮັບລະຫັດ UUID ຂອງເຄື່ອງທ່ານໄດ້. ບໍ່ສາມາດສືບຕໍ່ໄດ້."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:785
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ການກວດສອບ ISO MD5 ຜ່ານແລ້ວ"
-
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ການພິສູດ ການກວດສອບ ISO MD5 ລົ້ມເຫຼວ"
-
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr "ຕິດຕັ້ງ\nໂດຍການໂຄລນ"
-
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "ການຕິດຕັ້ງສຳເລັດ!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "ການຕິດຕັ້ງສຳເລັດແລ້ວ! ̣̀(%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ການຕິດຕັ້ງໄດ້ສຳເລັດແລ້ວ. ກົດ OK ເພື່ອອັດໂປຣແກຣມນີ້."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:890
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "ການສ້າງ LiveUSB ລົ້ມເຫຼວ!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/creator.py:859
-#, python-format
-msgid "Mount %s exists after unmounting"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "ບໍ່ມີພື້ນທີ່ຫວ່າງໃນ ອຸປະກອນ %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "ພາດຕິເຊີນ ແມ່ນ FAT16; ການສະແດງຂໍ້ມູນຈຳກັດຢູ່ 2G"
-
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "ພາດຕິເຊີນ ເປັນ FAT32; ຈຳກັດຂະຫນາດຄວາມຈຳທັບຊ້ອນຮອດ 4G"
-
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "ໜ່ວຍເກັບຂໍ້ມູນຖາວອນ"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "ບ່ອນສຳຮອງຂໍ້ມູນຄົງທີ່ (0 MB)"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s ພ້ອມທີ່ຈະບຸດຕ໌ໄດ້ແລ້ວ"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "ກະລຸນາຢືນຢັນການເລືອກອຸປະກອນຂອງທ່ານ"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Removing %(file)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "ເລືອກ Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "ກໍາລັງຕັ້ງຄ່າ ຟາຍລ໌ ບຸດຕ໌ OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "ປະເພດຂອງແຫຼ່ງຂໍ້ມູນ ບໍ່ສະໜັບສະໜູນການພິສູດ ຂອງ ການກວດສອບ ຂອງ ISO MD5 ໄດ້, ການພິສູດຂວ້າມໄປ"
-
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "ປະສານທຽບຂໍ້ມູນໃນດີສ"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "ອຸປະກອນເປົ້າຫມາຍ"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr ""
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "ບໍ່ຮູ້ຮຸ່ນໃດ: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "ກຳລັງດາວໂຫຼດ %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "ຜິດພາດ: ບໍ່ສາມາດກໍາປ້າຍຊື່ ຫຼື ໄດ້ຮັບລະຫັດ UUID ຂອງເຄື່ອງທ່ານໄດ້. ບໍ່ສາມາດສືບຕໍ່ໄດ້."
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "ການຕິດຕັ້ງສຳເລັດແລ້ວ! ̣̀(%s)"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "ຄຳເຕືອນ: ເຄື່ອງມືເຫຼົ່ານີ້ ຕ້ອງການແລ່ນໃນນາມຜູ້ບໍລິຫານ. ເພື່ອປະຕິບັດດັ່ງນີ້ໄດ້, ໃຫ້ກົດ ມາວສ໌ປຸ່ມຂວາ ໃສ່ ໄອຄັອນ ແລະ ໄຂ Properties. ຢູ່ເທິງແຖບ Compatibility, ໃຫ້ໝາຍເອົາຫ້ອງ \"Run this program as an administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
+
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ຕິດຕັ້ງຈາກ ISO\""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "ບໍ່ ພົບ ຊ່ອງອ່ານ ຢູເອສບີ ແຕ່ຢ່າງໃດ"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "ການຕິດຕັ້ງສຳເລັດ!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "ບໍ່ສາມາດຕິດຕັ້ງອຸປະກອນນີ້"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr ""
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "ກະລຸນາຢືນຢັນການເລືອກອຸປະກອນຂອງທ່ານ"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ດາວໂຫຼດ ສຳເລັດ!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ດາວໂຫຼດ ລົ້ມເຫຼວ:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "ທ່່ານ ສາມາດ ລອງ ທວນຄືນ ການດາວໂຫຼດ ຂອງ ທ່ານໄດ້ອີກ"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "ບໍ່ສາມາດໃຊ້ງານ ແຟ້ມ ທີ່ເລືອກ ໄດ້. ທ່ານອາດໂຊກດີ ຖ້າຫາກ ທ່ານ ຍ້າຍເອົາ ISO ໄປໄວ້ ຢູ່ root ຂອງ ຊ່ອງອ່ານຂອງທ່ານ (ເຊັ່ນ: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s ຖືກເລືອກແລ້ວ"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "ບໍ່ຮູ້ຮຸ່ນໃດ: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ກໍາລັງພິສູດ ການກວດສອບ ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "ຄຳເຕືອນ: ການສ້າງໜ່ວຍເກັບຂໍ້ມູນຖາວອນນີ້ ຈະລຶບຂໍ້ມູນທ່ານທີ່ມີຢູ່ອອກທັງໝົດ."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "ຄຳເຕືອນ: ເຄື່ອງມືເຫຼົ່ານີ້ ຕ້ອງການແລ່ນໃນນາມຜູ້ບໍລິຫານ. ເພື່ອປະຕິບັດດັ່ງນີ້ໄດ້, ໃຫ້ກົດ ມາວສ໌ປຸ່ມຂວາ ໃສ່ ໄອຄັອນ ແລະ ໄຂ Properties. ຢູ່ເທິງແຖບ Compatibility, ໃຫ້ໝາຍເອົາຫ້ອງ \"Run this program as an administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "ຂຽນລົງອຸປະກອນນີ້ ໃນອັດຕາຄວາມໄວ %(speed)d MB/ວິນາທີ"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "ທ່່ານ ສາມາດ ລອງ ທວນຄືນ ການດາວໂຫຼດ ຂອງ ທ່ານໄດ້ອີກ"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "ທ່ານຕ້ອງ ແລ່ນ ແອັບ ນີ້ ໃນນາມ root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ຫລື"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/lt/lt.po b/lt/lt.po
index 0416cdd..7b5fda6 100644
--- a/lt/lt.po
+++ b/lt/lt.po
@@ -12,9 +12,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-03-18 21:13+0000\n"
-"Last-Translator: Moo\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Lithuanian (http://www.transifex.com/otf/torproject/language/lt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -22,591 +22,551 @@ msgstr ""
"Language: lt\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonuoti ir įdiegti\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Jūs turite paleisti šią programą kaip administratorius"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Įdiegti iš ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s diegimo programa"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "Pasirinktas %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Nustatomas OLPC paleidimo failas..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Atsirado problemų, vykdant šią komandą: \"%(command)s\".\nIšsamesnis klaidos žurnalas buvo įrašytas į \"%(filename)s\"."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s jau ir taip paleidžiamas"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Reikia pagalbos? Skaitykite <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentaciją</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Įdiegti Tails į kitą USB atmintuką, nukopijuojant jau naudojamą Tails sistemą..</li>\n\n<li>Įdiegimui naudojamas USB atmintukas yra formatuojamas duomenys prarandami</li>\n\n<li>Šifruota Tails USB atmintuko ilgalaikė saugykla, kurią dabar naudojate nebus nukopijuota.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Naujinti kitą Tails USB atmintuką į tą pačią Tails versiją, kurią naudojate dabar.</li>\n\n<li>Jūsų naujinamo Tails USB atmintuko šifruotas ilgalaikis kaupiklis yra išsaugomas.</li>\n\n<li>Jūsų šiuo metu naudojamo Tails USB atmintuko šifruotas ilgalaikis kaupiklis nėra nukopijuojamas.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Naujinti kitą Tails USB atmintuką į ISO atvaizdžio versiją.</li>\n\n<li>Jūsų naujinamo Tails USB atmintuko šifruotas ilgalaikis kaupiklis yra išsaugomas.</li>\n\n<li>Jūsų šiuo metu naudojamo Tails USB atmintuko šifruotas ilgalaikis kaupiklis nėra nukopijuojamas.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Naršyti"
-
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:341
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Apskaičiuojama %s SHA1 suma"
-
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nepavyko rasti"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nežinomas ISO, kontrolinės sumos patikrinimas praleidžiamas"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Nepavyksta rasti įrenginio %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Kuriama %sMB ilgalaikė perdanga"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Įrenginys kol kas nėra prijungtas, todėl negalime nustatyti laisvos vietos kiekį."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Atsisiųsti %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Atsiuntimas baigtas!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nepavyko nukopijuoti %(infile)s į %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Atsiuntimas nepavyko: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Atsiunčiama %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Diskas yra kilpinis sujunginys, praleidžiamas MBR atstatymas"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nepavyko atlikti chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Klaida: Nepavyksta nustatyti etiketės ar gauti jūsų įrenginio UUID. Nepavyko tęsti."
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Nepavyksta rasti įrenginio %s"
+
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nepavyko rašyti į %(device)s, praleidžiama."
-#: ../liveusb/creator.py:393
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Kai kurie skaidiniai paskirties įrenginyje %(device)s yra prijungti. Prieš pradedant diegimo procesą, jie bus atjungti."
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr ""
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Nežinoma failų sistema. Gali būti, kad jūsų įrenginys turi būti iš naujo formatuotas."
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatuojama %(device)s kaip FAT32"
+msgid "Unsupported filesystem: %s"
+msgstr "Nepalaikoma failų sistema: %s"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 kontrolinės sumos patikrinimas nepavyko"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Nepavyko prijungti įrenginio: %(message)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr ""
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nerasta prijungimo taškų"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Įdiegti Tails"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Diegimas baigtas!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:785
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Diegimas baigtas! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Diegimas baigtas. Spustelėkite Gerai, kad užvertumėte šią programą."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Diegiama paleidyklė..."
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Atjungiamos failų sistemos ties \"%(device)s\""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:789
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Neįmanoma naujinti įrenginio %(pretty_name)s, kadangi jis nebuvo sukurtas, naudojant Tails diegimo programą. Vietoj to, jūs turėtumėte naudoti %(action)s, kad atnaujintumėte Tails šiame įrenginyje."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB sukūrimas nepavyko!"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Atjungiama \"%(udi)s\" ties \"%(device)s\""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr ""
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "Skaidomas įrenginys %(device)s"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr ""
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Atnaujinamos %(system_partition)s sistemos skaidinio savybės"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Įrenginyje %(device)s nėra laisvos vietos"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepalaikomas įrenginys \"%(device)s\", prašome pranešti apie klaidą."
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nerasta prijungimo taškų"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Bandoma vis tiek tęsti."
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Tikrinama failų sistema..."
+
+#: ../tails_installer/creator.py:980
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nepavyko pakeisti tomo etiketės: %(message)s"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr ""
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Diegiama paleidyklė..."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Skaidomas įrenginys %(device)s"
+msgid "Removing %(file)s"
+msgstr "Šalinama %(file)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s jau ir taip paleidžiamas"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr ""
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nepavyko rasti skaidinio"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Prašome patvirtinti savo įrenginio pasirinkimą"
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatuojama %(device)s kaip FAT32"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "Šalinama %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Atstatomas %s paleidimo įrašas (MBR)"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr ""
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Nustatomas OLPC paleidimo failas..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Diskas yra kilpinis sujunginys, praleidžiamas MBR atstatymas"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Kai kurie skaidiniai paskirties įrenginyje %(device)s yra prijungti. Prieš pradedant diegimo procesą, jie bus atjungti."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Šaltinio tipas nepalaiko ISO MD5 kontrolinės sumos patikrinimo, praleidžiama"
+msgid "Calculating the SHA1 of %s"
+msgstr "Apskaičiuojama %s SHA1 suma"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sinchronizuojami duomenys diske..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Paskirties įrenginys"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr ""
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Įrenginys \"%(pretty_name)s\" yra pernelyg mažas, kad būtų įdiegta Tails (reikalingas bent %(size)s GB įrenginys)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nepavyko rasti jokio palaikomo įrenginio"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Atsirado problemų, vykdant šią komandą: \"%(command)s\".\nIšsamesnis klaidos žurnalas buvo įrašytas į \"%(filename)s\"."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepalaikoma failų sistema: %s\nPrašome padaryti savo USB atmintuko atsarginę kopiją ir formatuoti jį su FAT failų sistema."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nepavyko gauti Win32_LogicalDisk; win32com užklausa negrąžino jokių rezultatų"
+
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nepavyko rasti"
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/creator.py:1477
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nežinoma laida: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Atsiunčiama %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Klaida: Nepavyksta nustatyti etiketės ar gauti jūsų įrenginio UUID. Nepavyko tęsti."
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Diegimas baigtas! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Bandoma vis tiek tęsti."
-
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB diskas rastas"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nepavyko pakeisti tomo etiketės: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nepavyko atlikti chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nepavyko nukopijuoti %(infile)s į %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nepavyko rasti jokio USB disko"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Įrenginys \"%(pretty_name)s\" yra pernelyg mažas, kad būtų įdiegta Tails (reikalingas bent %(size)s GB įrenginys)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nepavyko rasti jokio palaikomo įrenginio"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nepavyko rasti skaidinio"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Įdiegti iš ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nepavyko gauti Win32_LogicalDisk; win32com užklausa negrąžino jokių rezultatų"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Neįmanoma naujinti įrenginio %(pretty_name)s, kadangi jis nebuvo sukurtas, naudojant Tails diegimo programą. Vietoj to, jūs turėtumėte naudoti %(action)s, kad atnaujintumėte Tails šiame įrenginyje."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr ""
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr ""
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Diegimas baigtas!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nepavyko prijungti įrenginio"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nepavyko prijungti įrenginio: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Prašome patvirtinti savo įrenginio pasirinkimą"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr ""
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Jūs ruošiatės įdiegti Tails į %(size)s %(vendor)s %(model)s įrenginį (%(device)s). Visi pasirinktame įrenginyje esantys duomenys bus prarasti. Ar norite tęsti?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr ""
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Jūs ketinate naujinti Tails, esančią %(parent_size)s %(vendor)s %(model)s įrenginyje (%(device)s). Bet koks tame įrenginyje esantis ilgalaikis tomas išliks nepakeistas. Tęsti?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Atsiuntimas baigtas!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Atsiuntimas nepavyko: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Galite bandyti tęsti atsisiuntimą. "
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nepavyko atstatyti paleidimo įrašo (MBR). Gali būti, kad jūs neturite įdiegto paketo \"syslinux\"."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nepavyko rašyti į %(device)s, praleidžiama."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nežinomas ISO, kontrolinės sumos patikrinimas praleidžiamas"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Nežinoma dbus išimtis, bandant prijungti įrenginį: %(message)s"
+msgid "%(filename)s selected"
+msgstr "Pasirinktas %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Nežinoma failų sistema. Gali būti, kad jūsų įrenginys turi būti iš naujo formatuotas."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nežinoma laida: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Atjungiama \"%(udi)s\" ties \"%(device)s\""
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Atjungiamos failų sistemos ties \"%(device)s\""
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepalaikomas įrenginys \"%(device)s\", prašome pranešti apie klaidą."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepalaikoma failų sistema: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepalaikoma failų sistema: %s\nPrašome padaryti savo USB atmintuko atsarginę kopiją ir formatuoti jį su FAT failų sistema."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Atnaujinamos %(system_partition)s sistemos skaidinio savybės"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Įdiegti Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Naudoti esamą pristatomąjį sistemos ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Tikrinama ISO MD5 kontrolinė suma"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Tikrinama failų sistema..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Įspėjimas: Naujos ilgalaikės perdangos sukūrimas, ištrins jūsų esamą perdangą."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Jūs ruošiatės įdiegti Tails į %(size)s %(vendor)s %(model)s įrenginį (%(device)s). Visi pasirinktame įrenginyje esantys duomenys bus prarasti. Ar norite tęsti?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Jūs ketinate naujinti Tails, esančią %(parent_size)s %(vendor)s %(model)s įrenginyje (%(device)s). Bet koks tame įrenginyje esantis ilgalaikis tomas išliks nepakeistas. Tęsti?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Jūs naudojatės sena syslinux-extlinux versija kuri nepalaiko ext4 failų sistemos. "
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Galite bandyti tęsti atsisiuntimą. "
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Jūs turite paleisti šią programą kaip administratorius"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "arba"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/lv/lv.po b/lv/lv.po
index 5aeb593..f452af5 100644
--- a/lv/lv.po
+++ b/lv/lv.po
@@ -4,15 +4,15 @@
#
# Translators:
# Jānis-Marks Gailis <jm-gailis at fai-vianet.fr>, 2013
-# Ojārs Balcers <ojars.balcers at gmail.com>, 2012
-# Ojārs Balcers <ojars.balcers at gmail.com>, 2013-2015
+# Ojars Balcers <ojars.balcers at gmail.com>, 2012
+# Ojars Balcers <ojars.balcers at gmail.com>, 2013-2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Ojārs Balcers <ojars.balcers at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Latvian (http://www.transifex.com/otf/torproject/language/lv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: lv\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonēt & instalēt\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Šī lietotne jāizpilda saknes režīmā"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalēt no ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Uz mērķa ierīces izvērš tiešo attēlu jeb live image..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s instalēšanas programma"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Ieraksts ierīcē tika veikts ar ātrumu %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s izvēlēts"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Iestata OLPC sāknēšanas datni..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Radās problēmsituācija izpildot komandu: `%(command)s`.\nDetalizētāks kļūdas žurnāls tika ierakstīts '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificē LiveCD attēla kontrolsummu SHA1..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s jau ir sāknējams"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verificē LiveCD attēla kontrolsummu SHA256..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Nepieciešama palīdzība? Lasiet <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentāciju</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalē Tails uz cita USB zibja, kopējot pašlaik lietoto Tails sistēmu.</li>\n\n<li>USB zibis, uz kura instalēs, tiks formatēts un visi dati būs izdzēsti.</li>\n\n<li>Šobrīd lietotā Tails USB zibja šifrētā, pastavīgā glabātuve netiek kopēta.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atjauniniet citu Tails USB zibi uz to pašu Tails versiju, kuru šobrīd lietojat.</li>\n\n<li>Atjaunojamā Tails USB zibja šifrētā, pastavīgā glabātuve tiek saglabāta.</li>\n\n<li>Šobrīd lietotā Tails USB zibja šifrētā, pastavīgā glabātuve netiek kopēta.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atjauniniet citu Tails USB zibi uz ISO attēla versiju.</li>\n\n<li>Atjaunojamā Tails USB zibja šifrētā, pastavīgā glabātuve tiek saglabāta.</li>\n\n<li>Šobrīd lietotā Tails USB zibja šifrētā, pastavīgā glabātuve netiek kopēta.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Pārlūkot"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Piešķirot pastāvīgam pārklājumam papildu vietu savā USB zibatmiņā, Jums būs iespēja glabāt datus un paliekoši modificēt dzīvu sistēmu, kura darbojas. To nedarot, pēc pārlādes nebūs iespējams saglabāt datus."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Aprēķina %s SHA1"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Kļūda: Live CD SHA1 nav derīgs. Lai apietu šo verifikācijas pārbaudi, programmu var izpildīt ar argumentu --noverify ."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nav iespējams atrast"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nezināms ISO, tiek izlaista kontrolsummas verifikācija"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Nav iespējams atrast ierīci %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Uz ierīces nav pietiekami daudz brīvas vietas.\n%dMB ISO + %dMB pārklājums > %dMB brīvas vietas"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Rada %sMB lielu pastāvīgo pārklājumu"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Ierīce vēl nav uzmontēta, tāpēc nav iespējams noteikt brīvas vietas daudzumu."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Lejuplādēt %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Lejupielāde pabeigta!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nespēj kopēt %(infile)s uz %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Lejupielāde neizdevās: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Noņem esošo Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Lejuplādē %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Disks ir cilptestā, tiek izlaista MBR atiestatīšana"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nespēj chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Ievada unmount_device objektam '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Kļūda pētot ierīci"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Kļūda: Nav iespējams iegūt ierīces UUID vai piešķirt iezīmi. Nespēj turpināt."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Kļūda: Live CD SHA1 nav derīgs. Lai apietu šo verifikācijas pārbaudi, programmu var izpildīt ar argumentu --noverify ."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Uz mērķa ierīces izvērš tiešo attēlu jeb live image..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nespēj noņemt datni no iepriekšējās LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatē %(device)s kā FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 kontrolsumma bija sekmīga"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nespēj noņemt direktoriju no iepriekšējās LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 kontrolsummas verifikācija bija nesekmīga"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Nav iespējams atrast ierīci %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ja neizvēlēsities esošu Dzīvu ISO, tiks lejuplādēts atlasītais izlaidums."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nespēj rakstīt %(device)s, šis solis tiek izlaists."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalēt\nklonējot"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Uz mērķa ierīces %(device)s ir uzmontēti daži nodalījumi. Tie tiks nomontēti pirms instalēšanas procesa sākšanas."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalēt Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Nezināma datņu sistēma. Iespējams, ierīci nepieciešams pārformatēt."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalēšana ir pabeigta!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Datņu sistēma, kura netiek atbalstīta: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalēšana pabeigta! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalēšana ir pabeigta. Nospiediet Labi, lai aizvērtu programmu."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Nespēj montēt iekārtu: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalē sāknēšanas lādētāju..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Montēšanas punkti netika atrasti"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Ierīci %(pretty_name)s nav iespējams atjaunināt, jo tā nav izveidota ar Tails instalēšanas programmu. Jums drīzāk vajadzētu veikt %(action)s , lai uz šīs ierīces atjauninātu Tails."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB izveide neizdevās!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Ievada unmount_device objektam '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Pirms sākat šo programmu, pārliecinieties, ka tiek izvērsta visa tilpdatne jeb zipfails liveusb-creator."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Nomontē uz '%(device)s' uzmontētās datņu sistēmas"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pārliecinieties, ka USB atslēga ir iesprausta un formatēta kā FAT datņu sistēma"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Nomontē '%(udi)s' , kurš atrodas uz '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Pēc nomontēšanas pastāv montējums %s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Uz ierīces %(device)s nav brīvas vietas"
+msgid "Partitioning device %(device)s"
+msgstr "Nodalīšanas ierīce %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Montēšanas punkti netika atrasti"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Jaunina sistēmas nodalījuma īpašības %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Uz ierīces nav pietiekami daudz brīvas vietas.\n%dMB ISO + %dMB pārklājums > %dMB brīvas vietas"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Neatbalstīta ierīce '%(device)s', lūdzu ziņojiet par šo kļūdi."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Nodalījums ir FAT16; Pārklājuma izmērs tiek ierobežots līdz 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Lai vai kas, cenšas turpināt."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Nodalījums ir FAT32. Pārklājuma izmērs tiek ierobežots līdz 4G."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificē datņu sistēmu..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Nodalīšanas ierīce %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nespēj mainīt sējuma iezīmi: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Pastāvīgā krātuve"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalē sāknēšanas lādētāju..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Pastāvīga glabātuve (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Lūdzu, apstipriniet savu ierīces izvēli"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Noņem %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Atsvaidzinoši izlaidumi..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s jau ir sāknējams"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Laidieni atjaunināti!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nespēj atrast nodalījumu"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Noņem %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatē %(device)s kā FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Noņem esošo Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Atiestata %s pamatsāknēšanas ierakstu jeb MBR"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Izvēlēties Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Iestata OLPC sāknēšanas datni..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Disks ir cilptestā, tiek izlaista MBR atiestatīšana"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Uz mērķa ierīces %(device)s ir uzmontēti daži nodalījumi. Tie tiks nomontēti pirms instalēšanas procesa sākšanas."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Avota veids neatbalsta ISO kontrolsummas MD5 verifikāciju, šis solis tiek izlaists"
+msgid "Calculating the SHA1 of %s"
+msgstr "Aprēķina %s SHA1"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sinhronizē datus uz diska..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Mērķierīce"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Kļūda pētot ierīci"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Ierīce \"%(pretty_name)s\" ir pārāk maza, lai instalētu Tails (ir nepieciešams vismaz %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nevarēja atrast jebkādu atbalstītu ierīci"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Atlasīto datni nav iespējams lasīt. Lūdzu sakārtojiet atļaujas vai izvēlieties citu datni. "
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pārliecinieties, ka USB atslēga ir iesprausta un formatēta kā FAT datņu sistēma"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Radās problēmsituācija izpildot komandu: `%(command)s`.\nDetalizētāks kļūdas žurnāls tika ierakstīts '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Neatbalstīta datņu sistēma: %s\nLūdzu veiciet datu rezerves kopēšanu un formatējiet savu USB atslēgu kā FAT datņu sistēmu."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Šī poga ļauj meklēt esošu, iepriekš lejuplādētu Dzīvu sistēmu ISO. Neatzīmējot nevienu, automātiski tiks lejuplādēts laidiens."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nespēj sasniegt Win32_LogicalDisk; win32com vaicājums nesniedza atbildes"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Šī poga aizsāk LiveUSB izveides procesu. Tas nozīmē laidiena lejuplādi (pēc izvēles, un, ja nav atlasīts esošs laidiens), ISO izvēršanu uz USB zibatmiņas ierīces, pastāvīga pārklājuma izveidošanu un sāknēšanas ielādētāja instalāciju."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nav iespējams atrast"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Uz šīs USB zibatmiņas vēlaties instalēt savu Dzīvo sistēmu. Šī ierīce jāformatē ar datņu sistēmu FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nezināms laidiens: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Lejuplādē %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Norises josla rāda cik tālu aizritējis LiveUSB izveidošanas process"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Kļūda: Nav iespējams iegūt ierīces UUID vai piešķirt iezīmi. Nespēj turpināt."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Šis ir statusa žurnāls, kurā tiek ierakstīti visi ziņojumi."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalēšana pabeigta! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Lai vai kas, cenšas turpināt."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Atrasts USB disks"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Brīdinājums: Šis rīks jālieto administratora režīmā. Lai to izdarītu, ar labo peles taustiņu noklikšķiniet uz ikonas un atveriet Rekvizītus. Verot cilni Savietojamība, atzīmējiet lodziņu \"Izpildīt programmu administratora režīmā\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nespēj mainīt sējuma iezīmi: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nespēj chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nespēj kopēt %(infile)s uz %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nespēj atrast vismaz vienu USB disku"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Ierīce \"%(pretty_name)s\" ir pārāk maza, lai instalētu Tails (ir nepieciešams vismaz %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nevarēja atrast jebkādu atbalstītu ierīci"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nespēj atrast nodalījumu"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalēt no ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nespēj sasniegt Win32_LogicalDisk; win32com vaicājums nesniedza atbildes"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Ierīci %(pretty_name)s nav iespējams atjaunināt, jo tā nav izveidota ar Tails instalēšanas programmu. Jums drīzāk vajadzētu veikt %(action)s , lai uz šīs ierīces atjauninātu Tails."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Atsvaidzinoši izlaidumi..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Laidieni atjaunināti!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalēšana ir pabeigta!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nespēj uzmontēt ierīci"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nespēj montēt iekārtu: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Lūdzu, apstipriniet savu ierīces izvēli"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nespēj noņemt direktoriju no iepriekšējās LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Tūliņ Jūs instalēsit Tails uz %(size)s %(vendor)s %(model)s ierīces (%(device)s). Uz izvēlētās ierīces pazudīs visi dati. Vai turpināt?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nespēj noņemt datni no iepriekšējās LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Tūliņ Jūs jaunināsiet Tails uz %(parent_size)s %(vendor)s %(model)s ierīces (%(device)s). Uz šīs ierīces ikviens pastāvīgs sējums paliks nemainīts. Vai turpināt?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Lejupielāde pabeigta!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Lejupielāde neizdevās: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Variet vēlreiz mēģināt atjaunot lejupielādi"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nespēj atiestatīt MBR. Iespējams, ka nav instalēta pakotne `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Atlasīto datni nav iespējams lasīt. Lūdzu sakārtojiet atļaujas vai izvēlieties citu datni. "
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nespēj lietot atlasīto datni. Iespējams, veiktos labāk, ja ISO tiktu pārvietots uz diska sakni (proti, C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nespēj rakstīt %(device)s, šis solis tiek izlaists."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nezināms ISO, tiek izlaista kontrolsummas verifikācija"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Nezināms dbus izņēmums cenšoties montēt iekārtu: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s izvēlēts"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Nezināma datņu sistēma. Iespējams, ierīci nepieciešams pārformatēt."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nezināms laidiens: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Nomontē '%(udi)s' , kurš atrodas uz '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Nomontē uz '%(device)s' uzmontētās datņu sistēmas"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Neatbalstīta ierīce '%(device)s', lūdzu ziņojiet par šo kļūdi."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Datņu sistēma, kura netiek atbalstīta: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Neatbalstīta datņu sistēma: %s\nLūdzu veiciet datu rezerves kopēšanu un formatējiet savu USB atslēgu kā FAT datņu sistēmu."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Jaunina sistēmas nodalījuma īpašības %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Jaunināt\nklonējot"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalēt Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Jaunināt\nno ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Lietot esošo Dzīvas sistēmas ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verificē ISO MD5 kontrolsummu"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificē LiveCD attēla kontrolsummu SHA1..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verificē LiveCD attēla kontrolsummu SHA256..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificē datņu sistēmu..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Brīdinājums: Jauna pastāvīga pārklājuma izveide, dzēsīs esošo."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Brīdinājums: Šis rīks jālieto administratora režīmā. Lai to izdarītu, ar labo peles taustiņu noklikšķiniet uz ikonas un atveriet Rekvizītus. Verot cilni Savietojamība, atzīmējiet lodziņu \"Izpildīt programmu administratora režīmā\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Ieraksts ierīcē tika veikts ar ātrumu %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Tūliņ Jūs instalēsit Tails uz %(size)s %(vendor)s %(model)s ierīces (%(device)s). Uz izvēlētās ierīces pazudīs visi dati. Vai turpināt?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Tūliņ Jūs jaunināsiet Tails uz %(parent_size)s %(vendor)s %(model)s ierīces (%(device)s). Uz šīs ierīces ikviens pastāvīgs sējums paliks nemainīts. Vai turpināt?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Tiek lietota veca syslinux-extlinux versija, kura neatbalsta datņu sistēmu ext4 "
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Variet vēlreiz mēģināt atjaunot lejupielādi"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Šī lietotne jāizpilda saknes režīmā"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "vai"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/mg/mg.po b/mg/mg.po
index c17afd2..c37bd94 100644
--- a/mg/mg.po
+++ b/mg/mg.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Malagasy (http://www.transifex.com/otf/torproject/language/mg/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mg\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/mi/mi.po b/mi/mi.po
index a56a2c3..6c01dc5 100644
--- a/mi/mi.po
+++ b/mi/mi.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Maori (http://www.transifex.com/otf/torproject/language/mi/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mi\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/mk/mk.po b/mk/mk.po
index 265fdf3..307d0cf 100644
--- a/mk/mk.po
+++ b/mk/mk.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Macedonian (http://www.transifex.com/otf/torproject/language/mk/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mk\n"
"Plural-Forms: nplurals=2; plural=(n % 10 == 1 && n % 100 != 11) ? 0 : 1;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Прелистување"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ml/ml.po b/ml/ml.po
index 72673c8..610f5bb 100644
--- a/ml/ml.po
+++ b/ml/ml.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Malayalam (http://www.transifex.com/otf/torproject/language/ml/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ml\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/mn/mn.po b/mn/mn.po
index e63e14f..e7a12fe 100644
--- a/mn/mn.po
+++ b/mn/mn.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Mongolian (http://www.transifex.com/otf/torproject/language/mn/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mn\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/mr/mr.po b/mr/mr.po
index a769c12..b85ee64 100644
--- a/mr/mr.po
+++ b/mr/mr.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Marathi (http://www.transifex.com/otf/torproject/language/mr/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mr\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "किंवा"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ms_MY/ms_MY.po b/ms_MY/ms_MY.po
index 08c071c..2e4d664 100644
--- a/ms_MY/ms_MY.po
+++ b/ms_MY/ms_MY.po
@@ -9,8 +9,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Malay (Malaysia) (http://www.transifex.com/otf/torproject/language/ms_MY/)\n"
"MIME-Version: 1.0\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: ms_MY\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Anda mesti menjalankan aplikasi ini sebagai root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr ""
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Menulis ke peranti pada %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s dipilih"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Tetapkan OLPC boot fail..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr ""
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Terdapat ralat ketika cuba menjalankan baris arahan: `%(command)s`.\nFail log yang terdapat penerangan lebih lanjut telah dicipta ke '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr ""
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Mengesahkan SHA1 checksum bagi LiveCD image..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s telah boleh di-boot"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Mengesahkan SHA256 checksum bagi LiveCD image..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Ralat: SHA1 bagi Live CD anda tidak sah. Anda boleh menjalankan aplikasi ini dengan perimeter --noverify untuk melangkau fail pengesahan."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO tidak diketahui, langkau pengesahan checksum"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Mencipta %sMB lapisan berterusan"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Carian"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Tidak dapat menyalin %(infile)s kepada %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr ""
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Buang Live OS sedia ada"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Pengiraan SHA1 bagi %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Tidak dapat menjalankan barisa arahan chmod kepada %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Tidak dapat mencari"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Tidak dapat membuang fail daripada LiveOS sebelumnya: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Tidak dapat membuang direktori daripada LiveOS sebelumnya: %(message)s"
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Tidak dapat mencari peranti %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Mencipta %sMB lapisan berterusan"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Tidak dapat memasukkan data kepada %(device)s, langkau."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Muat turun %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Fail sistem tidak diketahui. Peranti anda mungkin harus diformatkan semula."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Muat turun berjaya!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Fail sistem tidak disokong: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Muat turun gagal:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "Memuat turun %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Tidak dapat melancarkan (mount) peranti: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr ""
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Tiada titik pelancaran (mount) dijumpai"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Ralat: Tidak dapat menetapkan label atau mendapatkan UUID peranti anda. Tidak dapat meneruskan."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Ralat: SHA1 bagi Live CD anda tidak sah. Anda boleh menjalankan aplikasi ini dengan perimeter --noverify untuk melangkau fail pengesahan."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Format %(device)s sebagai FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum diluluskan"
+msgid "Mount %s exists after unmounting"
+msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum pengesahan gagal"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Pemasangan selesai!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Pengesahan fail sistem..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Pemasangan berjaya! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Pemasangan telah selesai. Tekan OK untuk menutup program ini."
+msgid "Unable to change volume label: %(message)s"
+msgstr "Tidak dapat mengubah label volume: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Pemasangan bootloader..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Penciptaan LiveUSB gagal!"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Buang %(file)s"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s telah boleh di-boot"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pastikan USB anda sudah dipasang dan telah diformat ke fail sistem FAT"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Tidak dapat mencari partition"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Format %(device)s sebagai FAT32"
+
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Tiada ruang bebas pada peranti %(device)s"
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Tiada titik pelancaran (mount) dijumpai"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition adalah FAT16, saiz lapisan menyekat untuk 2G"
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr "Menetapkan semula Master Boot Rekod %s"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr ""
+msgid "Calculating the SHA1 of %s"
+msgstr "Pengiraan SHA1 bagi %s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Simpanan Berterusan"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
+msgstr "Sedang menyamaratakan data di dalam cakera..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr ""
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pastikan USB anda sudah dipasang dan telah diformat ke fail sistem FAT"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Fail sistem tidak disokong: %s\nSila buat salinan sokongan dan format USB anda dengan fail sistem FAT."
+
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
-#, python-format
-msgid "Removing %(file)s"
-msgstr "Buang %(file)s"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Tidak dapat mencari"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Buang Live OS sedia ada"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Resetting Master Boot Record of %s"
-msgstr "Menetapkan semula Master Boot Rekod %s"
+msgid "Unknown release: %s"
+msgstr "Versi tidak diketahui : %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Pilih Live ISO"
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Memuat turun %s..."
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Tetapkan OLPC boot fail..."
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Ralat: Tidak dapat menetapkan label atau mendapatkan UUID peranti anda. Tidak dapat meneruskan."
-#: ../liveusb/creator.py:742
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+msgid "Installation complete! (%s)"
+msgstr "Pemasangan berjaya! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Jenis sumber tidak menyokong pengesahan ISO MD5 checksum, melangkau"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Amaran: Alat ini perlu dijalankan sebagai Administrator. Untuk melakukan ini, klik kanan pada ikon dan membuka Properties. Di bawah tab Compatibility, klik pada kotak \"Run this program as an administrator\"."
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr "Sedang menyamaratakan data di dalam cakera..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Peranti Target"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Fail yang dipilih tidak dapat dibaca. Sila betulkan permission fail tersebut atau pilih fail lain."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Terdapat ralat ketika cuba menjalankan baris arahan: `%(command)s`.\nFail log yang terdapat penerangan lebih lanjut telah dicipta ke '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Butang ini akan membenarkan anda untuk memilih ISO yang anda telah muat turun sebelumnya. Jika anda tidak pilih, aplikasi ini akan muat turunnya secara automatik."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Tidak dapat mengubah label volume: %(message)s"
-
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Tidak dapat menjalankan barisa arahan chmod kepada %(file)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Pemasangan selesai!"
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Tidak dapat menyalin %(infile)s kepada %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Tidak dapat mencari mana-mana pemacu USB"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
+msgstr "Tidak dapat melancarkan peranti"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Tidak dapat mencari partition"
-
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
-msgstr "Tidak dapat melancarkan peranti"
-
-#: ../liveusb/creator.py:814
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Tidak dapat melancarkan (mount) peranti: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Tidak dapat membuang direktori daripada LiveOS sebelumnya: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Muat turun berjaya!"
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Tidak dapat membuang fail daripada LiveOS sebelumnya: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Muat turun gagal:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Anda boleh mencuba lagi untuk meneruskan muat turun"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Tidak dapat menetapkan semula MBR. Anda mungkin tidak mempunyai pakej `syslinux` yang sudah dipasang."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Fail yang dipilih tidak dapat dibaca. Sila betulkan permission fail tersebut atau pilih fail lain."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Tidak dapat menggunakan fail yang dipilih. Anda mungkin mempunyai nasib yang lebih baik jika anda pindahkan ISO anda ke direktori cakera keras anda (iaitu: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Tidak dapat memasukkan data kepada %(device)s, langkau."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO tidak diketahui, langkau pengesahan checksum"
+msgid "%(filename)s selected"
+msgstr "%(filename)s dipilih"
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Fail sistem tidak diketahui. Peranti anda mungkin harus diformatkan semula."
-
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versi tidak diketahui : %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Fail sistem tidak disokong: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Fail sistem tidak disokong: %s\nSila buat salinan sokongan dan format USB anda dengan fail sistem FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Mengesahkan ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Mengesahkan SHA1 checksum bagi LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Mengesahkan SHA256 checksum bagi LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Pengesahan fail sistem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Amaran: Mewujudkan lapisan berterusan baru akan memadam fail yang sedia ada."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Amaran: Alat ini perlu dijalankan sebagai Administrator. Untuk melakukan ini, klik kanan pada ikon dan membuka Properties. Di bawah tab Compatibility, klik pada kotak \"Run this program as an administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Menulis ke peranti pada %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Anda sedang menggunakan syslinux-extlinux versi lama yang tidak menyokong fail sistem ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Anda boleh mencuba lagi untuk meneruskan muat turun"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Anda mesti menjalankan aplikasi ini sebagai root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/mt/mt.po b/mt/mt.po
index 82e7ce6..0c68833 100644
--- a/mt/mt.po
+++ b/mt/mt.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Maltese (http://www.transifex.com/otf/torproject/language/mt/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: mt\n"
"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : n==0 || ( n%100>1 && n%100<11) ? 1 : (n%100>10 && n%100<20 ) ? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/my/my.po b/my/my.po
index 77fc128..5811d5f 100644
--- a/my/my.po
+++ b/my/my.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Burmese (http://www.transifex.com/otf/torproject/language/my/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: my\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "ဖွင့်ကြည့်ရန်"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/nah/nah.po b/nah/nah.po
index 7bdf52d..3800535 100644
--- a/nah/nah.po
+++ b/nah/nah.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Nahuatl (http://www.transifex.com/otf/torproject/language/nah/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: nah\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/nap/nap.po b/nap/nap.po
index 74d6bd6..3fc7432 100644
--- a/nap/nap.po
+++ b/nap/nap.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Neapolitan (http://www.transifex.com/otf/torproject/language/nap/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: nap\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/nb/nb.po b/nb/nb.po
index 13d5595..36027d9 100644
--- a/nb/nb.po
+++ b/nb/nb.po
@@ -12,9 +12,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-04-22 15:44+0000\n"
-"Last-Translator: Allan Nordhøy <epost at anotheragency.no>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Norwegian Bokmål (http://www.transifex.com/otf/torproject/language/nb/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -22,591 +22,551 @@ msgstr ""
"Language: nb\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klon & installer\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Du må kjøre denne applikasjonen som administrator"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Installer fra ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Pakker ut det levende bildeavtrykket til målenheten…"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s -installasjonskandidat"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Skrev til enheten ved %(speed)d MB/sekund"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valgt"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Setter opp OLPC-oppstartsfil…"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Det oppstod et problem i utførelsen av følgende kommando: `%(command)s`.\nEn mer detaljert feilmelding er lagret i '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verifiserer SHA1-sjekksum av levende CD-avbildning…"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s kan brukes ved oppstart"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verifiserer SHA256-sjekksum av levende CD-avbildning…"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Behov for hjelp? Les <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentasjonen</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installer Tails på en annen USB-pinne ved å kopiere Tails-systemet du bruker nå dithen</li>\n\n<li>USB-pinnen du installerer på vil bli formatert og all data på den går tapt</li>\n\n<li>Det krypterte vedvarende lagringsområdet til Tails-pinnen du bruker nå blir ikke kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Oppgrader en eldre versjon Tails USB-pinne til den samme versjonen av Tails du bruker nå.</li>\n\n<li>Det krypterte vedvarende området av Tails-pinnen du oppgraderer blir beholdt</li>\n\n<li>Det krypterte vedvarende lagringsområdet av Tails-pinnen du bruker nå blir ikke kopiert.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Oppgrader en annen Tails-pinne til versjonen funnet i en ISO-avbildning</li>\n\n<li>Det krypterte vedvarende området av Tails-pinnen som du oppgraderer blir beholdt.</li>\n\n<li>Det krypterte vedvarende lagringsområdet av Tails-pinnen du bruker nå blir ikke kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Gå til"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Ved å tildele ekstra lagringsplass for vedvarende overlegg på USB-enheten, vil du bli i stand til å lagre og gjøre permanente modifiseringer på live operativsystemet. Uten dette, vil du ikke være i stand til å lagre data som vil vedvare etter omstart."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Kalkulerer SHA1 av %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Feil: SHA1-sjekksummen for Live CDen din er ugyldig. Du kan kjøre dette programmet med argumentet --noverify for å utelate denne bekfeftelsessjekken.."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Finner ikke"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Ukjent ISO, hopper over sjekksum verifisering"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Kan ikke finne enhet %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ikke nok ledig plass på enheten\n%dMB ISO + %dMB over kapasitet > %dMB ledig plass"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Lager %sMB vedvarende overlegg"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Enheten er ikke montert enda, dermed kan ikke mengden ledig plass bestemmes."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Last ned %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Nedlasting fullført!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Klarer ikke kopiere %(infile)s til %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Nedlasting feilet: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Fjerner eksisterende Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Laster ned %s…"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Stasjonen er en loopback, hopper over tilbakestilling av MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Klarer ikke chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Angir unmount_device for '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Feil ved sondering av enhet"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Feil: Kan ikke sette etikett eller få UUID fra enheten. Kan ikke fortsette."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Feil: SHA1-sjekksummen for Live CDen din er ugyldig. Du kan kjøre dette programmet med argumentet --noverify for å utelate denne bekfeftelsessjekken.."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Pakker ut det levende bildeavtrykket til målenheten…"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Klarer ikke slette fil fra tidligere LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formaterer %(device)s til FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 sjekksum godkjent"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Klarer ikke å fjerne katalog fra tidligere LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 sjekksum verifisering mislyktes"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Kan ikke finne enhet %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Dersom du ikke har valgt en eksisterende Live-ISO, vil den valgte utgivelsen bli lastet ned for deg. "
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Klarer ikke å skrive til %(device)s, hopper over."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installer\nved å klone"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Noen partisjoner på målenheten %(device)s er montert. De vil avmontert før installasjonsprosessen starter."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Ukjent filsystem. Din enhet må kanskje omformateres."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installasjonen er fullført!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Ikke støttet filsystem: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installasjonen er fullført! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installasjonen er ferdig. Klikk OK for å lukke dette programmet."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Klarer ikke å laste enhet: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installerer oppstartslaster…"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Ingen lastepunkter funnet"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Det er umulig å oppgradere enheten %(pretty_name)s fordi den ikke ble opprettet med Tails-installereren. Du bør istedet bruke %(action)s for å oppgradere Tails på enheten."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Oppretting av LiveUSB feilet!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Angir unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Sørg for å pakke ut hele \"liveusb-creator\" zip-filen før du kjører dette programmet."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Avmonterer monterte filsystem på '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Sjekk at USB enheten din er koblet til og formatert med FAT filsystem"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Avmonterer '%(udi)s' på '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "%s eksisterer fortsatt etter frakoblingsforsøk"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Ingen ledig plass på enheten %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partisjonerer enheten %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Ingen lastepunkter funnet"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Oppdaterer egenskaper for systempartisjon %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ikke nok ledig plass på enheten\n%dMB ISO + %dMB over kapasitet > %dMB ledig plass"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Enheten '%(device)s' støttes ikke, rapporter som feil."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partisjonen er FAT16; Begrenser overlegg størrelse til 2G."
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Prøver å fortsette uansett. "
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partisjonen er FAT32; Begrenser overlagringskapasitet til 4GB."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verifiserer filsystem…"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partisjonerer enheten %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Kan ikke endre volum etikett: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Vedvarende lagring"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installerer oppstartslaster…"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Vedvarende lagring (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bekreft valg av enhet"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Fjerner %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Oppdaterer utgivelser…"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s kan brukes ved oppstart"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Utgivelser oppdatert!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Klarer ikke å finne partisjon"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Fjerner %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formaterer %(device)s til FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Fjerner eksisterende Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Tilbakestiller Master Boot Record av %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Velg Live-ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Setter opp OLPC-oppstartsfil…"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Stasjonen er en loopback, hopper over tilbakestilling av MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Noen partisjoner på målenheten %(device)s er montert. De vil avmontert før installasjonsprosessen starter."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Kildetypen støtter ikke verifisering av ISO MD5 kontrollsummer, hopper over"
+msgid "Calculating the SHA1 of %s"
+msgstr "Kalkulerer SHA1 av %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synkroniserer data på stasjonen…"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Målenhet"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Feil ved sondering av enhet"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Enheten \"%(pretty_name)s\" har for liten lagringsplass for å installere Tails (minst %(size)s Gb er påkrevet)"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Fant ingen enhet som støttes"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Den valgte filen er uleselig. Sørg for at du har de nødvendige rettighetene eller velg en annen fil."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Sjekk at USB enheten din er koblet til og formatert med FAT filsystem"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Det oppstod et problem i utførelsen av følgende kommando: `%(command)s`.\nEn mer detaljert feilmelding er lagret i '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Filsystemet er ikke støttet: %s\nTa en sikkerhetskopi av USB-enheten og formater med FAT-filsystem"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Denne knappen lar deg lete etter en tidligere nedlastet Livesystem ISO. Hvis du ikke velger en, vil en utgivelse bli lastet ned automatisk. "
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Klarte ikke å hente Win32_LogicalDisk; win32com spørringen ga ingen resultat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Denne knappen starter LiveUSB opprettelsen. Dette innebærer nedlastning av en utgivelse (om det ikke ble valgt en eksisterende), oppakking av ISOen til USB-enheten, opprettelse av vedvarende overlegg, og installasjon av bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Finner ikke"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dette er USB-enheten du ønsker å installere Livesystemet ditt på. Enheten må være formatert med FAT-filsystemet."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Ukjent versjon: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Laster ned %s…"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dette er fremdriftslinjen som angir hvor langt du er kommet i LiveUSB opprettelsen."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Feil: Kan ikke sette etikett eller få UUID fra enheten. Kan ikke fortsette."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dette er statuskonsollen hvor alle meldinger lagres."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installasjonen er fullført! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Prøver å fortsette uansett. "
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB disk funnet"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Advarsel: Dette verktøyet må kjøres som Administrator. For å gjøre det, høyreklikker du på ikonet og åpner Egenskaper. Under kompatibilitets fanen, kryss av i boksen for \"Kjør dette programmet som administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Kan ikke endre volum etikett: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Klarer ikke chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Klarer ikke kopiere %(infile)s til %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Finner ingen USB-stasjoner"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Enheten \"%(pretty_name)s\" har for liten lagringsplass for å installere Tails (minst %(size)s Gb er påkrevet)"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Fant ingen enhet som støttes"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Klarer ikke å finne partisjon"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Installer fra ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Klarte ikke å hente Win32_LogicalDisk; win32com spørringen ga ingen resultat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Det er umulig å oppgradere enheten %(pretty_name)s fordi den ikke ble opprettet med Tails-installereren. Du bør istedet bruke %(action)s for å oppgradere Tails på enheten."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Oppdaterer utgivelser…"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Utgivelser oppdatert!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installasjonen er fullført!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Klarer ikke å laste enhet"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Klarer ikke å laste enhet: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bekreft valg av enhet"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Klarer ikke å fjerne katalog fra tidligere LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Du er i ferd med å installere Tails på enheten %(size)s %(vendor)s %(model)s (%(device)s). All data på den valgte enheten vil gå tapt. Vil du fortsette?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Klarer ikke slette fil fra tidligere LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Du er i ferd med å oppgradere Tails på enheten %(parent_size)s %(vendor)s %(model)s (%(device)s). Eventuell vedvarende lagring på enheten vil forbli uforandret. Vil du fortsette? "
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Nedlasting fullført!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Nedlasting feilet: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Du kan prøve igjen for å gjenoppta din nedlasting"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Klarer ikke å tilbakestille MBR. Du har kanskje ikke `syslinux` pakken installert."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Den valgte filen er uleselig. Sørg for at du har de nødvendige rettighetene eller velg en annen fil."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Kunne ikke bruke den angitte filen. Du kan være heldigere hvis du flytter ISOen din til root (f.eks: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Klarer ikke å skrive til %(device)s, hopper over."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Ukjent ISO, hopper over sjekksum verifisering"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Ukjent dbus unntak under montering av enhet: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s valgt"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Ukjent filsystem. Din enhet må kanskje omformateres."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Ukjent versjon: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Avmonterer '%(udi)s' på '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Avmonterer monterte filsystem på '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Enheten '%(device)s' støttes ikke, rapporter som feil."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Ikke støttet filsystem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Filsystemet er ikke støttet: %s\nTa en sikkerhetskopi av USB-enheten og formater med FAT-filsystem"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Oppdaterer egenskaper for systempartisjon %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Oppgrader\nved å klone"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Oppgrader\nfra ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Bruk eksisterende Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifiserer ISO MD5 sjekksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verifiserer SHA1-sjekksum av levende CD-avbildning…"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verifiserer SHA256-sjekksum av levende CD-avbildning…"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verifiserer filsystem…"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Advarsel: Opprettelse av et nytt vedvarende overlegg vil overskrive det eksisterende."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Advarsel: Dette verktøyet må kjøres som Administrator. For å gjøre det, høyreklikker du på ikonet og åpner Egenskaper. Under kompatibilitets fanen, kryss av i boksen for \"Kjør dette programmet som administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Skrev til enheten ved %(speed)d MB/sekund"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Du er i ferd med å installere Tails på enheten %(size)s %(vendor)s %(model)s (%(device)s). All data på den valgte enheten vil gå tapt. Vil du fortsette?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Du er i ferd med å oppgradere Tails på enheten %(parent_size)s %(vendor)s %(model)s (%(device)s). Eventuell vedvarende lagring på enheten vil forbli uforandret. Vil du fortsette? "
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Du bruker en gammel versjon av syslinux-extlinux som ikke støtter ext4 filsystemet"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Du kan prøve igjen for å gjenoppta din nedlasting"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Du må kjøre denne applikasjonen som administrator"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "eller"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/nds/nds.po b/nds/nds.po
index ee3745f..134a7e5 100644
--- a/nds/nds.po
+++ b/nds/nds.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Low German (http://www.transifex.com/otf/torproject/language/nds/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: nds\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Sie müssen diese Anwendung als root ausführen."
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr ""
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Richte OLPC-Boot-Datei ein ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fehler: De SHA1 vun de Live CD is ungüllig. Je künnt düsses Programm mit de '--noverify'-Argument utföhren, um de Verifikatschoonspröfen to umgahn."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Unbekannte ISO-Datei, überspringe Checksummen-Überprüfung"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Erstelle %s MB persistentes Overlay"
+
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kann nicht finden"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Künn Lööpwark %s nich finnen"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Erstelle %s MB persistentes Overlay"
-
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:692
#, python-format
-msgid "Download %(distribution)s"
+msgid ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Daalladen avsluten!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Daalladen ging in'n dutt:"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "Daalladen %s ..."
+msgid "Unsupported filesystem: %s"
+msgstr "Nich unnerstüttes Dateisystem: %s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fehler: Künn de Beschriften nich setten or de UUID vum Lööpwark kregen. Künn nich wietermaken."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fehler: De SHA1 vun de Live CD is ungüllig. Je künnt düsses Programm mit de '--noverify'-Argument utföhren, um de Verifikatschoonspröfen to umgahn."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:785
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:265
-#, python-format
-msgid "Installation complete! (%s)"
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Överpröfe Dateisystem ..."
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB-Erstellen ging in'n dutt!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pass op, dat dien USB-Stick insteckt is un mit ee'm FAT-Dateisystem formatert is"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition ist FAT16. Beschränkung der Overlay-Grösse auf 2 GB"
-
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistenter Speicher"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr ""
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO-Avbill wählen"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Richte OLPC-Boot-Datei ein ..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pass op, dat dien USB-Stick insteckt is un mit ee'm FAT-Dateisystem formatert is"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nich unnerstüttes Dateisystem: %s\nBidde seker diene Daten un formateer dien USB-Stick mit ee'm FAT-Dateisystem."
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr ""
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kann nicht finden"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "Unbekannte Verschoon: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Daalladen %s ..."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fehler: Künn de Beschriften nich setten or de UUID vum Lööpwark kregen. Künn nich wietermaken."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Kann Gerät nicht einhängen"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Daalladen avsluten!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Daalladen ging in'n dutt:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Je künn versöken, dat Daalladen nohmal to starten un hoopen, dat dat an de glieke Stelle wietergeiht."
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Unbekannte ISO-Datei, überspringe Checksummen-Überprüfung"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Unbekannte Verschoon: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nich unnerstüttes Dateisystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nich unnerstüttes Dateisystem: %s\nBidde seker diene Daten un formateer dien USB-Stick mit ee'm FAT-Dateisystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Überprüfe ISO-MD5-Checksumme"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Överpröfe Dateisystem ..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Achtung: Dat Erstellen vun ee'm nejen persistenten Overlay löscht eens, dat dat all givt."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Je künn versöken, dat Daalladen nohmal to starten un hoopen, dat dat an de glieke Stelle wietergeiht."
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Sie müssen diese Anwendung als root ausführen."
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ne/ne.po b/ne/ne.po
index 740a1f9..27d0b7d 100644
--- a/ne/ne.po
+++ b/ne/ne.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Nepali (http://www.transifex.com/otf/torproject/language/ne/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ne\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/nl/nl.po b/nl/nl.po
index ea539c9..64d3976 100644
--- a/nl/nl.po
+++ b/nl/nl.po
@@ -19,9 +19,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-05-06 09:40+0000\n"
-"Last-Translator: André Koot <meneer at tken.net>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Dutch (http://www.transifex.com/otf/torproject/language/nl/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -29,591 +29,551 @@ msgstr ""
"Language: nl\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Kloon & Installeer\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Deze applicatie moet gestart worden als beheerder"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Installeer met ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Live afbeelding naar het doelapparaat overzetten..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installatieprogramma"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Schreef naar apparaat met %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s geselecteerd"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Inrichten OLPC bootbestand..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Er was een probleem met het uitvoeren van het volgende commando: `%(command)s`.\nUitgebreidere informatie is geschreven naar '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "SHA1 checksum van LiveCD image verifiëren..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s is al bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "SHA256 checksum van LiveCD image verifiëren..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Hulp nodig? Lees <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentatie</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installeer Tails op een andere USB stick door het kopieren van het Tails systeem wat je op dit moment gebruikt..</li>\n\n<li>De USB stick waarop je installeert is geformatteerd en alle data is verwijderd.</li>\n\n<li> Het ge-encrypte persistente opslag van de Tails USB stick die u op dit moment gebruikt is niet gekopieerd.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade nog een Tails USB stick met dezelfde versie van Tails die u op dit moment gebruikt.</li>\n\n<li>Het geëncrypteerde persistent opslag van de Tails USB stick die u upgradet is beschermd.</li>\n\n<li>Het geëncrypteerde persistent opslag van de Tails USB stick die u nu gebruikt is niet gekopieerd.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade een andere Tails USB stick naar een versie van een ISO image.</li>\n\n<li>Het geëncrypteerde persistent opslag van de Tails USB stick die u upgradet is beschermd.</li>\n\n<li>Het geëncrypteerde persistent opslag van de Tails USB stick die u op dit moment gebruikt is niet gekopieerd.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Bladeren"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Door extra ruimte voor persistente opslag op je USB stick toe te wijzen, kun je data en permanente aanpassingen bewaren op je live besturingssysteem. Zonder dit kun je geen data opslaan die bewaard blijft na opnieuw opstarten."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "SHA1 berekenen van %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fout: De SHA1 van jouw Live CD is niet correct. Je kunt dit programma uitvoeren met het --noverify argument om deze controle over te slaan."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Niet gevonden"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Onbekende ISO, checksumverificatie wordt overgeslagen"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Kan apparaat %s niet vinden"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Niet genoeg vrije ruimte op het apparaat.\n %dMB ISO + %dMB overlay > %dMB vrije ruimte"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMb persistente geheugenruimte aanmaken..."
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Apparaat is nog niet aangekoppeld, daarom kunnen we de hoveelheid vrije ruimte niet bepalen."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Download %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download voltooid!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kan %(infile)s niet naar %(outfile)s kopiëren: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download mislukt: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Bestaand Live OS verwijderen"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s downloaden..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Station is een loopback, MBR-reset wordt overgeslagen"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Kan rechten op %(file)s niet aanpassen: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Unmount_device voor '%(device)s' binnengaan"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Fout bij proben apparaat"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fout: Kan het label niet zetten of de UUID van jouw apparaat niet verkrijgen. Kan niet verder gaan."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fout: De SHA1 van jouw Live CD is niet correct. Je kunt dit programma uitvoeren met het --noverify argument om deze controle over te slaan."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Live afbeelding naar het doelapparaat overzetten..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Kan bestand van vorige LiveOS niet verwijderen: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s als FAT32 formatteren"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum klopte"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Kan map van vorige LiveOS niet verwijderen: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksumverificatie niet gelukt"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Kan apparaat %s niet vinden"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Als je geen bestaande Live ISO selecteert, zal de geselecteerde release voor je gedownload worden."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Niet in staat te schrijven naar %(device)s; wordt overgeslagen."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installeren\nvia klonen"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Sommige partities van het doelapparaat %(device)s zijn gekoppeld. Ze zullen ontkoppeld worden voordat het installatieproces wordt gestart."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installeer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Onbekend bestandssysteem. Het apparaat moet mogelijk geherformatteerd worden."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installatie afgerond!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Bestandssysteem niet ondersteund: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installatie afgerond! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installatie is afgerond. Klik op OK om dit programma af te sluiten."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Kan apparaat niet aankoppelen: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Bootloader installeren..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Geen aankoppelpunten gevonden"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Het is niet mogelijk om %(pretty_name)s te upgraden omdat het niet gecreëerd werd met Tails Installer. Je moet %(action)s gebruiken om Tails te updaten op dit toestel."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB aanmaken mislukt!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Unmount_device voor '%(device)s' binnengaan"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Wees er zeker van dat het hele liveusb-creator zip bestand is uitgepakt voordat je dit programma uitvoert."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Aangekoppeld bestandssysteem op '%(device)s' afkoppelen"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Verzeker je ervan dat jouw USB-stick is aangesloten en geformatteerd met het FAT bestandssysteem"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "'%(udi)s' op '%(device)s' afkoppelen"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Aankoppeling %s bestaat na afkoppeling"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Er is geen vrije ruimte op apparaat %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partitioneren van apparaat %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Geen aankoppelpunten gevonden"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Bezig met het vernieuwen van eigenschappen van systeempartitie %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Niet genoeg vrije ruimte op het apparaat.\n %dMB ISO + %dMB overlay > %dMB vrije ruimte"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Niet-ondersteund apparaat '%(device)s', rapporteer alstublieft een bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partitie is FAT16; Overlay size wordt beperkt tot 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Proberen om toch door te gaan."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partitie is FAT32; Overlay grootte wordt beperkt tot 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Bestandssysteem verifiëren..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitioneren van apparaat %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Niet in staat volumelabel te veranderen: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistente opslag"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Bootloader installeren..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Persistente opslag (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bevestig uw apparaatselectie"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)s verwijderen"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Bezig met vernieuwen van releases..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s is al bootable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Releases zijn bijgewerkt!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Kan geen partitie vinden"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s verwijderen"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s als FAT32 formatteren"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Bestaand Live OS verwijderen"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Master Boot Record van %s resetten"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selecteer Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Inrichten OLPC bootbestand..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Station is een loopback, MBR-reset wordt overgeslagen"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Sommige partities van het doelapparaat %(device)s zijn gekoppeld. Ze zullen ontkoppeld worden voordat het installatieproces wordt gestart."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Brontype ondersteunt het verifiëren van ISO MD5 checksum niet; wordt overgeslagen"
+msgid "Calculating the SHA1 of %s"
+msgstr "SHA1 berekenen van %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Data synchroniseren op schijf..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Doelapparaat"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Fout bij proben apparaat"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Het toestel \"%(pretty_name)s\" is te klein om Tails te installeren (hiervoor is minstens %(size)s GB vereist)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Niet in staat ondersteunde apparaten te vinden"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Het geselecteerde bestand is onleesbaar. Herstel de rechten of selecteer een ander bestand."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Verzeker je ervan dat jouw USB-stick is aangesloten en geformatteerd met het FAT bestandssysteem"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Er was een probleem met het uitvoeren van het volgende commando: `%(command)s`.\nUitgebreidere informatie is geschreven naar '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Niet ondersteund bestandssysteem: %s\nMaak een back-up en formatteer jouw USB stick met het FAT bestandssysteem."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Deze knop laat je bladeren naar een bestaande Live system ISO dat je eerder hebt gedownload. Als je er geen selecteert, zal er automatisch een release voor je gedownload worden."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Niet in staat Win32_LogicalDisk te verkrijgen; win32com query gaf geen zoekresultaat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Deze knop start het proces om de LiveUSB te maken. Dit houdt in dat er indien nodig een uitgave wordt gedownload (als er geen reeds bestaande was geselecteerd), de ISO wordt uitgepakt naar een USB-apparaat, de persistente geheugenruimte wordt aangemaakt en de bootloader wordt geïnstalleerd."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Niet gevonden"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dit is de USB-stick waar u uw Live systeem op wilt installeren. Dit apparaat moet in het FAT bestandssysteem zijn geformatteerd."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Onbekende release: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s downloaden..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Deze balk toont aan hoe ver u zit in het proces om de LiveUSB aan te maken"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fout: Kan het label niet zetten of de UUID van jouw apparaat niet verkrijgen. Kan niet verder gaan."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dit is het statusveld waar alle berichten getoond worden."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installatie afgerond! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Proberen om toch door te gaan."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB schijf gevonden"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Waarschuwing: Deze tool moet als beheerder worden uitgevoerd. Om dat te doen, klik met rechter muisknop op het icoon en open Eigenschappen. Onder de Compatibiliteit tab, check het \"Start dit programma als beheerder\" selectievakje."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Niet in staat volumelabel te veranderen: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Kan rechten op %(file)s niet aanpassen: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kan %(infile)s niet naar %(outfile)s kopiëren: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kan geen USB-apparaten vinden"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Het toestel \"%(pretty_name)s\" is te klein om Tails te installeren (hiervoor is minstens %(size)s GB vereist)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Niet in staat ondersteunde apparaten te vinden"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Kan geen partitie vinden"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Installeer met ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Niet in staat Win32_LogicalDisk te verkrijgen; win32com query gaf geen zoekresultaat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Het is niet mogelijk om %(pretty_name)s te upgraden omdat het niet gecreëerd werd met Tails Installer. Je moet %(action)s gebruiken om Tails te updaten op dit toestel."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Bezig met vernieuwen van releases..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Releases zijn bijgewerkt!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installatie afgerond!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Kan apparaat niet aankoppelen"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Kan apparaat niet aankoppelen: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bevestig uw apparaatselectie"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Kan map van vorige LiveOS niet verwijderen: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Je gaat Tails installeren op het %(size)s %(vendor)s %(model)s apparaat (%(device)s). Alle data op het geselecteerde apparaat zal verloren gaan. Doorgaan?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Kan bestand van vorige LiveOS niet verwijderen: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Je gaat Tails upgraden op het %(parent_size)s %(vendor)s %(model)s apparaat (%(device)s). Alle persistente volumes op dit apparaat zullen onveranderd blijven. Doorgaan?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download voltooid!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download mislukt: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Je kunt opnieuw proberen je download voort te zetten"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Niet in staat de MBR te resetten. Mogelijk is het `syslinux` pakket niet geïnstalleerd."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Het geselecteerde bestand is onleesbaar. Herstel de rechten of selecteer een ander bestand."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Kan geselecteerd bestand niet gebruiken. Je kunt meer geluk hebben als je jouw ISO verplaatst naar het hoogste niveau van jouw schijf (bijv.: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Niet in staat te schrijven naar %(device)s; wordt overgeslagen."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Onbekende ISO, checksumverificatie wordt overgeslagen"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Onbekende dbus-uitzondering tijdens aankoppelen van apparaat: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s geselecteerd"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Onbekend bestandssysteem. Het apparaat moet mogelijk geherformatteerd worden."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Onbekende release: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "'%(udi)s' op '%(device)s' afkoppelen"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Aangekoppeld bestandssysteem op '%(device)s' afkoppelen"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Niet-ondersteund apparaat '%(device)s', rapporteer alstublieft een bug."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Bestandssysteem niet ondersteund: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Niet ondersteund bestandssysteem: %s\nMaak een back-up en formatteer jouw USB stick met het FAT bestandssysteem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Bezig met het vernieuwen van eigenschappen van systeempartitie %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Bijwerken\nvia klonen"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installeer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Bijwerken\nvia ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Gebruik bestaande Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 checksum verifiëren"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "SHA1 checksum van LiveCD image verifiëren..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "SHA256 checksum van LiveCD image verifiëren..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Bestandssysteem verifiëren..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Waarschuwing: Het maken van een nieuwe persistente geheugenruimte zal jouw bestaande geheugenruimte verwijderen."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Waarschuwing: Deze tool moet als beheerder worden uitgevoerd. Om dat te doen, klik met rechter muisknop op het icoon en open Eigenschappen. Onder de Compatibiliteit tab, check het \"Start dit programma als beheerder\" selectievakje."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Schreef naar apparaat met %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Je gaat Tails installeren op het %(size)s %(vendor)s %(model)s apparaat (%(device)s). Alle data op het geselecteerde apparaat zal verloren gaan. Doorgaan?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Je gaat Tails upgraden op het %(parent_size)s %(vendor)s %(model)s apparaat (%(device)s). Alle persistente volumes op dit apparaat zullen onveranderd blijven. Doorgaan?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Je gebruikt een oude versie van syslinux-extlinux die het ext4-bestandssysteem niet ondersteunt"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Je kunt opnieuw proberen je download voort te zetten"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Deze applicatie moet gestart worden als beheerder"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "of"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/nl_BE/nl_BE.po b/nl_BE/nl_BE.po
index d4b54ee..9b44ba0 100644
--- a/nl_BE/nl_BE.po
+++ b/nl_BE/nl_BE.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Dutch (Belgium) (http://www.transifex.com/otf/torproject/language/nl_BE/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: nl_BE\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "U dient deze applicatie als root uit te voeren"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Installeer van ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s geselecteerd"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OPLC boot file aan het opmaken..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr ""
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Er deed zich een probleem voor bij het uitvoeren van volgende opdracht : `%(command)s`.\nEen meer gedetailleerd foutrapport werd weggeschreven naar '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr ""
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "SHA1 checksum van de LiveCD image aan het verifiëren..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr ""
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "SHA256 checksum van de LiveCD image aan het verifiëren..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Onbekende ISO, checksum verificatie overslaan"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kan %(infile)s niet kopiëren naar %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr ""
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Bestaande Live OS aan het verwijderen"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "De SHA1 van %s aan het berekenen"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Kan geen chmod %(file)s: %(message)s uitvoeren"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kan niet vinden"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Kan het bestand van de vorige LiveOS niet verwijderen: %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Kan apparaat %s niet vinden"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr ""
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Niet mogelijk om te schrijven naar %(device)s, overslaan."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Onbekend bestandssysteel. Uw apparaat dient geformatteerd te worden. "
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download klaar!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Niet ondersteund bestandsysteem: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download mislukt:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "%s aan het downloaden..."
+msgid "Unable to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Foutmelding bij het zoeken van het apparaat"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s aan het formatteren als FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum geslaagd"
-
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum verificatie mislukt"
+msgid "Partitioning device %(device)s"
+msgstr "Apparaat %(device)s aan het partitioneren"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Indien u geen bestaande Live ISO selecteert, zal de geselecteerde release gedownload worden."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installeer Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Toch proberen voortgaan."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installatie voltooid!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Bestandsysteem verifiëren"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installatie voltooid! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installatie voltooid! Duw op OK om het programma te sluiten."
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Bootloader aan het installeren..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Kan het apparaat %(pretty_name)s niet upgraden omdat het niet niet gecreeërd werd met gebruik van de Tails installer. U zal %(action)s dienen te gebruiken om Tails te upgraden op dit apparaat."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB maken mislukt!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr ""
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "%(file)s aan het verwijderen"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Kan partitie niet vinden"
+
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Geen vrije ruimte op apparaat %(device)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s aan het formatteren als FAT32"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Apparaat %(device)s aan het partitioneren"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistent Storage"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Persistent Storage (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Gelieve uw apparaatselectie te bevestigen"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Releases aan het refreshen..."
+msgid "Resetting Master Boot Record of %s"
+msgstr "Master Boot Record aan het resetten voor %s"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
-msgstr "%(file)s aan het verwijderen"
+msgid "Calculating the SHA1 of %s"
+msgstr "De SHA1 van %s aan het berekenen"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Bestaande Live OS aan het verwijderen"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
+msgstr "Data op de schijf aan het syncroniseren..."
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
-msgstr "Master Boot Record aan het resetten voor %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Foutmelding bij het zoeken van het apparaat"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selecteer Live ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Kan geen ondersteund apparaat vinden"
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OPLC boot file aan het opmaken..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Niet ondersteund bestandssyteem: %s\nGelieve een back-up uit te voeren en uw USB stick te formatteren naar het FAT bestandssysteem."
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr "Data op de schijf aan het syncroniseren..."
-
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Doelapparaat"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kan niet vinden"
-#: ../liveusb/gui.py:438
-#, python-format
+#: ../tails_installer/creator.py:1477
msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Het apparaat \"%(pretty_name)s\" is te klein om Tails op te installeren (minstens %(size)s GB is vereist)."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Het geselecteerde bestand is onleesbaar. Gelieve de permissies te wijzigen of een ander bestand te selecteren."
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Onbekende release: %s"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:73
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Er deed zich een probleem voor bij het uitvoeren van volgende opdracht : `%(command)s`.\nEen meer gedetailleerd foutrapport werd weggeschreven naar '%(filename)s'."
+msgid "Downloading %s..."
+msgstr "%s aan het downloaden..."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:204
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Deze knop stelt u in staat om te bladeren naar een bestaand Live system ISO dat u eerder gedownload heeft. Indien u er geen selecteert, zal er automatisch een release voor u gedownload worden."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Deze knop zal het LiveUSB creatie-proces starten. Dit omvat dat er optioneel een release gedownload zal worden (indien er geen bestaande geselecteerd werd), het uitpakken van de ISO naar het USB apparaat, het creeëren van de persistent overlay, en het installeren van de bootloader."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installatie voltooid! (%s)"
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dit is de USB stick waar u uw Live systeem op wilt installeren. Dit apparaat dient geformatteerd te zijn in het FAT bestandssysteem."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:353
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dit is de voortgangsbalk die zal aangeven waar u zich in het proces van de LiveUSB creatie bevindt"
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dit is de statusconsole, waar alle berichten naar weggeschreven worden."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Toch proberen voortgaan."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB drive gevonden"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Kan geen chmod %(file)s: %(message)s uitvoeren"
+msgid "%(size)s %(label)s"
+msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kan %(infile)s niet kopiëren naar %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kan USB drive niet vinden"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Het apparaat \"%(pretty_name)s\" is te klein om Tails op te installeren (minstens %(size)s GB is vereist)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Kan geen ondersteund apparaat vinden"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Kan partitie niet vinden"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Installeer van ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Kan het apparaat %(pretty_name)s niet upgraden omdat het niet niet gecreeërd werd met gebruik van de Tails installer. U zal %(action)s dienen te gebruiken om Tails te upgraden op dit apparaat."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Releases aan het refreshen..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr ""
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installatie voltooid!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Gelieve uw apparaatselectie te bevestigen"
+
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to mount device: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Kan het bestand van de vorige LiveOS niet verwijderen: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download klaar!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download mislukt:"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "U kan opnieuw proberen om uw download te hervatten"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Kan de MBR niet resetten. Het kan zijn dat u het `syslinux` pakket niet geinstalleerd hebt. "
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Het geselecteerde bestand is onleesbaar. Gelieve de permissies te wijzigen of een ander bestand te selecteren."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Niet mogelijk om te schrijven naar %(device)s, overslaan."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Onbekende ISO, checksum verificatie overslaan"
+msgid "%(filename)s selected"
+msgstr "%(filename)s geselecteerd"
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Onbekend bestandssysteel. Uw apparaat dient geformatteerd te worden. "
-
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Onbekende release: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Niet ondersteund bestandsysteem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Niet ondersteund bestandssyteem: %s\nGelieve een back-up uit te voeren en uw USB stick te formatteren naar het FAT bestandssysteem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installeer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Gebruik bestaand Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 checksum aan het verifiëren"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "SHA1 checksum van de LiveCD image aan het verifiëren..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "SHA256 checksum van de LiveCD image aan het verifiëren..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Bestandsysteem verifiëren"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "U gebruikt een oude versie van syslinux-extlinux dat het ext4 bestandssysteem niet ondersteund"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "U kan opnieuw proberen om uw download te hervatten"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "U dient deze applicatie als root uit te voeren"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "of"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/nn/nn.po b/nn/nn.po
index 951669d..5701737 100644
--- a/nn/nn.po
+++ b/nn/nn.po
@@ -9,9 +9,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-25 22:39+0000\n"
-"Last-Translator: Finn Brudal <finnbrudal at yahoo.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Norwegian Nynorsk (http://www.transifex.com/otf/torproject/language/nn/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: nn\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "«Klon og installer"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Du lyt køyra denne applikasjonen som rot"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "«Installerer frå ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Dreg ut live-bilete åt måleinheita..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installerar"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Skreiv åt einheiti med %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s vald(e)"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Set upp OLPC-støvelfili..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Det var vanskeleg å køyra fylgjande ordre: `%(command)s`\nEin meir utførleg feillogg hev vorte skriven åt '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Stadfestar SHA1-kontrollsummen åt LiveCD-biletet..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s allereie startbar"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Stadfestar SHA256-kontrollsummen åt LiveCD-biletet..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Treng du hjelp? Les <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentasjonen</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installer Tails på ei onnor USB-pinna ved å kopiera Tails-systemet som du nyttar no.</li>\n\n<li>USB-pinni som du installerer på formaterest og alle upplysingar gjeng tapt.</li>\n\n<li>Det krypterte vedvarande lagaret åt Tails-USB-pinni som du nyttar no vert ikkje kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppgrader ei onnor Tails-USB-pinna åt same versjon av Tails som du nyttar no.</li>\n\n<li>Det krypterte vedvarande lageret på Tails-USB-pinni du uppgraderer vert forvart.</li>\n\n<li>Det krypterte vedvarande lageret på Tails-USB-pinni du nyttar no vert ikkje kopiert.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppgrader ei onnor Tails-USB-pinna åt versjonen av eit ISO-bilete.</li>\n\n<li>Det krypterte vedvarande lageret på Tails-USB-pinni du uppgraderer vert forvart.</li>\n\n<li>Det krypterte vedvarande lageret på Tails-USB-pinni du nyttar no vert ikkje kopiert.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Surf"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Ved å åtdela yttarlegare plass på USB-pinni di for eit vedvarande yverlegg, vil du kunna lagra upplysingar og gjere vedvarande endringar på ditt køyrande operativsystem. Utan dette vil du ikkje kunna lagra upplysingar som vil vedvara etter umstart."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Reknar ut SHA1'en av %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Feil: SHA1'en åt Live-CD'en din er ugyldig. Du kan køyra dette programmet med --noverify-parameteren for å hoppa yver denne stadfestingskontrollen."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Finn ikkje"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Ukjend ISO, hoppar yver kontrollsumstadfestingi"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Finn ikkje eininga %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ikkje nok ledug plass på einheiti.\n%dMB ISO + %dMB yverlegg > %dMB ledug plass"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Skapar %sMB vedvarande yverlegg"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Einheiten er ikkje enno montert, so me kan ikkje avgjere mengden fri lagringsplass."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Last ned %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Nedlastinga er ferdig!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kan ikkje kopiera %(infile)s åt %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Mislukka nedlasting:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Fjernar verande Live-OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Lastar ned %s "
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drevet er ei attendekopling, hoppar yver MBR-nullstilling"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Kan ikkje chmod'a %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Gjeng inn i unmount_device for '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Feil ved sondering av einheit"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Feil: Kan ikkje setja etiketten eller fenge UUID'en åt einheita di. Kan ikkje halda fram."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Feil: SHA1'en åt Live-CD'en din er ugyldig. Du kan køyra dette programmet med --noverify-parameteren for å hoppa yver denne stadfestingskontrollen."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Dreg ut live-bilete åt måleinheita..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Kan ikkje fjerna fil frå fyrre LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formaterer %(device)s som FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO-MD5-kontrollsum passerte"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Kan ikkje fjerna katalog frå fyrre LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Mislukka ISO MD5 kontrollsumstadfesting"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Finn ikkje eininga %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Um du ikkje vel ein Live-ISO som finst, vil den valde utgåva verte lasta ned for deg."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Kan ikkje skriva på %(device)s, hoppar yver."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installer\nved å klona"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Nokre inndelingar på måleinheiti %(device)s er monterte. Dei vil verte avmontera fyre innstalleringsgangen tek til."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installer Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Ukjend filsystem. Det kan vera at einheiti di treng å verta formatert um."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installering fullførd"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Ustøtta filsystem: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installasjonen er fullført! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installering vart fullendt. Trykk OK for å lukka dette programmet."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Kan ikkje montera einheiti: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installerer støvellastar..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Fann ingen monteringspunkt"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Det er umogleg å uppgradere einheita %(pretty_name)s av di ho ikkje vart skapa ved hjelp av Tails-installatøren. Du burde i staden nytta %(action)s for å uppgradere Tails på denne einheita."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Laging av LiveUSB mislukkast!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Gjeng inn i unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Sjå til å draga ut heile liveusb-creator-zipfili fyre du køyrar dette programmet."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Avmonterer monterte filsystem på '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Sjå til at USB-lykelen din er plugga inn og formatert med FAT-filsystemet"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Avmonterer '%(udi)s' på '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Montering %s finst etter avmontering"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Ingen ledig plass på eininga %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Delar inn einheit %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Fann ingen monteringspunkt"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Uppdaterer eigenskapar åt systeminndelingi: %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ikkje nok ledug plass på einheiti.\n%dMB ISO + %dMB yverlegg > %dMB ledug plass"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Ustøtta einheit '%(device)s', ver venleg og meld inn eit insekt."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Inndeling er FAT16; avgrensar yverleggstorleik åt 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Freistar å halda fram likevel."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Inndeling er FAT32; avgrenar yverleggstorleik åt 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Stadfestar filsystem..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Delar inn einheit %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Kan ikkje gjera um volumetikett: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Vedvarande lager"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installerer støvellastar..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Vedvarande lager (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Ver venleg og godtak einheitsvalet ditt"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Fjernar %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Oppdaterer versjonane "
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s allereie startbar"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versjonane oppdaterte!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Kan ikkje finna inndeling"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Fjernar %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formaterer %(device)s som FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Fjernar verande Live-OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Nullstiller hovudinndelingssektor åt %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Vel Live-ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Set upp OLPC-støvelfili..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drevet er ei attendekopling, hoppar yver MBR-nullstilling"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Nokre inndelingar på måleinheiti %(device)s er monterte. Dei vil verte avmontera fyre innstalleringsgangen tek til."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Kjeldetype støttar ikkje stadfesting av ISO-MD5-kontrollsum, hoppar yver"
+msgid "Calculating the SHA1 of %s"
+msgstr "Reknar ut SHA1'en av %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Skapar samsvar med upplysingar på skivi..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Måleining"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Feil ved sondering av einheit"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Einheiti \"%(pretty_name)s\" er for lita til å installere Tails på (minst %(size)s GB er påkravt)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Kan ikkje finna nokor støtta einheit."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Den valde fili er ulesbar. Ver venleg og fiks løyvi hennar eller vel ei onnor fil."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Sjå til at USB-lykelen din er plugga inn og formatert med FAT-filsystemet"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Det var vanskeleg å køyra fylgjande ordre: `%(command)s`\nEin meir utførleg feillogg hev vorte skriven åt '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Ustøtta filsystem: %s\nVer venleg og ta kopi av USB-lykelen din og formater han med FAT-filsystemet."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Denne knappen lèt deg sjå etter ein eksisterande Live system-ISO som du hev lasta ned fyrr. Um du ikkje vel ein, vil ei utgåva verte lasta ned for deg av seg sjølv."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Kan ikkje fenga Win32_LogicalDisk; win32com-fyrespurnad gav ingi resultat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Denne knappen vil byrja LiveUSB-skapnadsgangen. Dette medførar å kanskje lasta ned ei utgåva (um ei som finst ikkje var vald), draga ut ISO'en åt USB-einheiti, skapa det vedvarande yverlegget, og installera støvellastaren."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Finn ikkje"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Dette er USB-pinni du vil installera Live-systemet ditt på. Denne einheiti lyt vera formatert med FAT-filsystemet."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Ukjend versjon: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Lastar ned %s "
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Dette er framgangslina som vil visa kor langt i LiveUSB-skapnadsgangen du er"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Feil: Kan ikkje setja etiketten eller fenge UUID'en åt einheita di. Kan ikkje halda fram."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Dette er stodkonsollen, kor alle meldingar vert skrivne."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installasjonen er fullført! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Freistar å halda fram likevel."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB-drev funne"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Åtvaring: Dette verktyet treng å køyra som Administrator. For å gjera dette, høgreklikk på ikonet og opn Eigenskapar. Under Kompatibilitet-fanen, kryss av \"Køyr dette programmet som administrator\"-boksen."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Kan ikkje gjera um volumetikett: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Kan ikkje chmod'a %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kan ikkje kopiera %(infile)s åt %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kan ikkje finna noko USB-drev"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Einheiti \"%(pretty_name)s\" er for lita til å installere Tails på (minst %(size)s GB er påkravt)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Kan ikkje finna nokor støtta einheit."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Kan ikkje finna inndeling"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "«Installerer frå ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Kan ikkje fenga Win32_LogicalDisk; win32com-fyrespurnad gav ingi resultat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Det er umogleg å uppgradere einheita %(pretty_name)s av di ho ikkje vart skapa ved hjelp av Tails-installatøren. Du burde i staden nytta %(action)s for å uppgradere Tails på denne einheita."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Oppdaterer versjonane "
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versjonane oppdaterte!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installering fullførd"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Kan ikkje montera einheiti"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Kan ikkje montera einheiti: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Ver venleg og godtak einheitsvalet ditt"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Kan ikkje fjerna katalog frå fyrre LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Du kjem til å installera Tails på %(size)s %(vendor)s %(model)s-einheiti (%(device)s). Alle upplysingar på den valde einheiti vil gjenga tapt. Halda fram?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Kan ikkje fjerna fil frå fyrre LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Du kjem til å uppgradera Tails på %(parent_size)s %(vendor)s %(model)s-einheiti (%(device)s). Eitkvart vedvarande volum på denne einheiti vil bli uendra. Halda fram?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Nedlastinga er ferdig!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Mislukka nedlasting:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Du kan prøva å halda fram med nedlastinga"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Kan ikkje nullstille MBR. Du hev kanskje ikkje `syslinux`-pakki installert."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Den valde fili er ulesbar. Ver venleg og fiks løyvi hennar eller vel ei onnor fil."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Kan ikkje nytta den valde fili. Du hev kanskje betre hell um du flyttar ISO'en din åt roti av drevet ditt (t.d. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Kan ikkje skriva på %(device)s, hoppar yver."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Ukjend ISO, hoppar yver kontrollsumstadfestingi"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Ukjend dbus-unnatak under montering av einheiti: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s vald(e)"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Ukjend filsystem. Det kan vera at einheiti di treng å verta formatert um."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Ukjend versjon: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Avmonterer '%(udi)s' på '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Avmonterer monterte filsystem på '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Ustøtta einheit '%(device)s', ver venleg og meld inn eit insekt."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Ustøtta filsystem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Ustøtta filsystem: %s\nVer venleg og ta kopi av USB-lykelen din og formater han med FAT-filsystemet."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Uppdaterer eigenskapar åt systeminndelingi: %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Uppgrader\nved kloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installer Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Uppgrader\nfrå ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Bruk gjeldande Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Stadfestar ISO MD5 kontrollsum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Stadfestar SHA1-kontrollsummen åt LiveCD-biletet..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Stadfestar SHA256-kontrollsummen åt LiveCD-biletet..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Stadfestar filsystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Åtvaring: Å skapa eit nytt vedvarande yverlegg vil slette det som finst."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Åtvaring: Dette verktyet treng å køyra som Administrator. For å gjera dette, høgreklikk på ikonet og opn Eigenskapar. Under Kompatibilitet-fanen, kryss av \"Køyr dette programmet som administrator\"-boksen."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Skreiv åt einheiti med %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Du kjem til å installera Tails på %(size)s %(vendor)s %(model)s-einheiti (%(device)s). Alle upplysingar på den valde einheiti vil gjenga tapt. Halda fram?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Du kjem til å uppgradera Tails på %(parent_size)s %(vendor)s %(model)s-einheiti (%(device)s). Eitkvart vedvarande volum på denne einheiti vil bli uendra. Halda fram?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Du nyttar ein gamal versjon av syslinux-extlinux som ikkje støttar ext4-filsystemet"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Du kan prøva å halda fram med nedlastinga"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Du lyt køyra denne applikasjonen som rot"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "eller"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/nso/nso.po b/nso/nso.po
index d8cd510..d8b9114 100644
--- a/nso/nso.po
+++ b/nso/nso.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Northern Sotho (http://www.transifex.com/otf/torproject/language/nso/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: nso\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/oc/oc.po b/oc/oc.po
index 4462b3e..518d290 100644
--- a/oc/oc.po
+++ b/oc/oc.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Occitan (post 1500) (http://www.transifex.com/otf/torproject/language/oc/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: oc\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/om/om.po b/om/om.po
index c727944..bcccf37 100644
--- a/om/om.po
+++ b/om/om.po
@@ -7,9 +7,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2012-10-03 17:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Oromo (http://www.transifex.com/otf/torproject/language/om/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: om\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/or/or.po b/or/or.po
index 39b69b1..dcea75e 100644
--- a/or/or.po
+++ b/or/or.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Oriya (http://www.transifex.com/otf/torproject/language/or/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: or\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/pa/pa.po b/pa/pa.po
index e4de3b7..b6d7d73 100644
--- a/pa/pa.po
+++ b/pa/pa.po
@@ -10,8 +10,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-07-26 08:39+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Panjabi (Punjabi) (http://www.transifex.com/otf/torproject/language/pa/)\n"
"MIME-Version: 1.0\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: pa\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "ਤੁਹਾਨੂੰ ਇਹ ਐਪਲੀਕੇਸ਼ਨ ਰੂਟ ਵਜੋਂ ਚਲਾਉਣੀ ਚਾਹੀਦੀ ਹੈ"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s ਇੰਸਟਾਲਰ"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ਚੁਣੀ"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "ਗਲਤੀ: ਤੁਹਾਡੀ ਲਾਈਵ CD ਦਾ SHA1 ਗਲਤ ਹੈ। ਤੁਸੀਂ ਇਸ ਪਰੋਗਰਾਮ ਨੂੰ --noverify ਆਰਗੂਮੈਂਟ ਨਾਲ ਚਲਾ ਸਕਦੇ ਹੋ ਤਾਂ ਜੋ ਇਹ ਜਾਂਚ ਬਾਈਪਾਸ ਕੀਤੀ ਜਾ ਸਕੇ।"
+
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "ਝਲਕ"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "ਜੰਤਰ %s ਲੱਭਣ ਲਈ ਅਸਮਰੱਥ"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s ਡਾਊਨਲੋਡ"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ਡਾਊਨਲੋਡ ਮੁਕੰਮਲ!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "ਗ਼ੈਰ-ਸਹਾਇਕ ਫਾਇਲ ਸਿਸਟਮ: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ਡਾਊਨਲੋਡ ਫੇਲ੍ਹ: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "...%s ਡਾਊਨਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ"
+msgid "Unable to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "ਗਲਤੀ: ਲੇਬਲ ਸੈੱਟ ਨਹੀਂ ਕਰ ਸਕਿਆ ਜਾਂ ਤੁਹਾਡੇ ਜੰਤਰ ਦਾ UUID ਪ੍ਰਾਪਤ ਨਹੀਂ ਕਰ ਸਕਦਾ। ਜਾਰੀ ਕਰਨ ਤੋਂ ਅਸਫਲ।"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "ਗਲਤੀ: ਤੁਹਾਡੀ ਲਾਈਵ CD ਦਾ SHA1 ਗਲਤ ਹੈ। ਤੁਸੀਂ ਇਸ ਪਰੋਗਰਾਮ ਨੂੰ --noverify ਆਰਗੂਮੈਂਟ ਨਾਲ ਚਲਾ ਸਕਦੇ ਹੋ ਤਾਂ ਜੋ ਇਹ ਜਾਂਚ ਬਾਈਪਾਸ ਕੀਤੀ ਜਾ ਸਕੇ।"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "ਟੇਲਜ਼ ਇੰਸਟਾਲ ਕਰੋ"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਪੂਰੀ ਹੋਈ!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "ਫਾਇਲ ਸਿਸਟਮ ਦੀ ਜਾਂਚ ਕੀਤੀ ਜਾ ਰਹੀ ਹੈ..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਪੂਰੀ ਹੋਈ! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਪੂਰੀ ਹੋਈ! ਇਹ ਪ੍ਰੋਗਰਾਮ ਬੰਦ ਕਰਨ ਲਈ ਠੀਕ ਹੈ ਦੱਬੋ।"
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "...ਬੂਟ ਲੋਡਰ ਇੰਸਟਾਲ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "ਲਾਈਵ-USB ਬਣਾਉਣ ਲਈ ਫੇਲ੍ਹ!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "ਜਾਂਚ ਕਰੋ ਕੀ ਤੁਹਾਡੀ USB ਪਲੱਗਇਨ ਕੀਤੀ ਹੈ ਅਤੇ FAT ਫਾਇਲ ਸਿਸਟਮ ਨਾਲ ਫਾਰਮੈਟ ਕੀਤੀ ਹੈ"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "%(device)s ਯੰਤਰ ਉੱਤੇ ਖਾਲੀ ਥਾਂ ਨਹੀਂ ਹੈ"
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:410
-#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "ਅਟੱਲਤਾ ਸਟੋਰੇਜ਼"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr ""
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "ਲਾਈਵ ISO ਚੁਣੋ"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "ਜਾਂਚ ਕਰੋ ਕੀ ਤੁਹਾਡੀ USB ਪਲੱਗਇਨ ਕੀਤੀ ਹੈ ਅਤੇ FAT ਫਾਇਲ ਸਿਸਟਮ ਨਾਲ ਫਾਰਮੈਟ ਕੀਤੀ ਹੈ"
+
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "ਗ਼ੈਰਸਹਾਇਕ ਫਾਇਲ ਸਿਸਟਮ: %s\nਬੈਕਅੱਪ ਲਵੋ ਤੇ ਆਪਣੀ USB ਨੂੰ FAT ਫਾਇਲ ਸਿਸਟਮ ਨਾਲ ਫਾਰਮੈਟ ਕਰੋ।"
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "ਅਣਜਾਣ ਰੀਲਿਜ਼: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "...%s ਡਾਊਨਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "ਗਲਤੀ: ਲੇਬਲ ਸੈੱਟ ਨਹੀਂ ਕਰ ਸਕਿਆ ਜਾਂ ਤੁਹਾਡੇ ਜੰਤਰ ਦਾ UUID ਪ੍ਰਾਪਤ ਨਹੀਂ ਕਰ ਸਕਦਾ। ਜਾਰੀ ਕਰਨ ਤੋਂ ਅਸਫਲ।"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "Installation complete! (%s)"
+msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਪੂਰੀ ਹੋਈ! (%s)"
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr ""
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "ਇੰਸਟਾਲੇਸ਼ਨ ਪੂਰੀ ਹੋਈ!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "ਯੰਤਰ ਮਾਊਂਟ ਕਰਨ ਲਈ ਅਸਮਰੱਥ"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ਡਾਊਨਲੋਡ ਮੁਕੰਮਲ!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ਡਾਊਨਲੋਡ ਫੇਲ੍ਹ: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "ਤੁਸੀਂ ਆਪਣੇ ਡਾਊਨਲੋਡ ਮੁੜ ਚਾਲੂ ਕਰਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰ ਸਕਦੇ ਹੋ"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s ਚੁਣੀ"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "ਅਣਜਾਣ ਰੀਲਿਜ਼: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "ਗ਼ੈਰ-ਸਹਾਇਕ ਫਾਇਲ ਸਿਸਟਮ: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "ਗ਼ੈਰਸਹਾਇਕ ਫਾਇਲ ਸਿਸਟਮ: %s\nਬੈਕਅੱਪ ਲਵੋ ਤੇ ਆਪਣੀ USB ਨੂੰ FAT ਫਾਇਲ ਸਿਸਟਮ ਨਾਲ ਫਾਰਮੈਟ ਕਰੋ।"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "ਟੇਲਜ਼ ਇੰਸਟਾਲ ਕਰੋ"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "ਫਾਇਲ ਸਿਸਟਮ ਦੀ ਜਾਂਚ ਕੀਤੀ ਜਾ ਰਹੀ ਹੈ..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "ਚੇਤਾਵਨੀ: ਨਵਾਂ ਸਥਿਰ ਓਵਰਲੇਅ ਬਣਾਉਣ ਨਾਲ ਤੁਹਾਡਾ ਮੌਜੂਦਾ ਹਟਾਇਆ ਜਾਵੇਗਾ।"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "ਤੁਸੀਂ ਆਪਣੇ ਡਾਊਨਲੋਡ ਮੁੜ ਚਾਲੂ ਕਰਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰ ਸਕਦੇ ਹੋ"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "ਤੁਹਾਨੂੰ ਇਹ ਐਪਲੀਕੇਸ਼ਨ ਰੂਟ ਵਜੋਂ ਚਲਾਉਣੀ ਚਾਹੀਦੀ ਹੈ"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ਜਾਂ"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/pap/pap.po b/pap/pap.po
index ba187d9..786535c 100644
--- a/pap/pap.po
+++ b/pap/pap.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Papiamento (http://www.transifex.com/otf/torproject/language/pap/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: pap\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/pl/pl.po b/pl/pl.po
index c59b0c7..fe66c54 100644
--- a/pl/pl.po
+++ b/pl/pl.po
@@ -16,601 +16,561 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: sebx\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Polish (http://www.transifex.com/otf/torproject/language/pl/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: pl\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+"Plural-Forms: nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>=14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonuj i instaluj\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Tę aplikację można uruchomić tylko jako root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Instalacja z ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Wypakowywanie obrazu na wybrane urządzenie..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Instalator"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Dokonano zapisu na urządzeniu z prędkością %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "Wybrano %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Ustawianie pliku startowego OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Wystąpił problem podczas wykonywania następującego polecenia: \"%(command)s\"\nBardziej szczegółowy dziennik błędu został zapisany do pliku \"%(filename)s\""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Sprawdzanie sumy kontrolnej SHA1 obrazu LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s jest już startowa"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Sprawdzanie sumy kontrolnej SHA256 obrazu LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Potrzebujesz pomocy? Przeczytaj <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentację</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Zainstaluj Tails na innym urządzeniu USB poprzez skopiowanie systemu Tails którego obecnie używasz..</li>\n\n<li>Urządzenie USB na którym zainstalujesz Tails zostanie sformatowane i tym samym wszelkie dane zostaną z niego usunięte.</li>\n\n<li>Zaszyfrowane pliki na systemie Tails który obecnie używasz nie zostaną skopiowane.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Zaktualizuj inne USB z Tails do tej samej wersji Tails co teraz używasz.</li>\n\n<li>Zaszyfrowane pliki na systemie Tails który zaktualizujesz zostaną zachowane.</li>\n\n<li>Zaszyfrowane pliki na systemie Tails który obecnie używasz nie zostaną skopiowane.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Zaktualizuj inne USB z Tails do wersji z obrazu ISO.</li>\n\n<li>Zaszyfrowane pliki na systemie Tails który zaktualizujesz zostaną zachowane.</li>\n\n<li>Zaszyfrowane pliki na systemie Tails który obecnie używasz nie zostaną skopiowane.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Przeglądaj"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Poprzez alokację dodatkowej przestrzeni na dysku USB dla obszaru trwałych danych, można zapisywać dane i dokonywać trwałych zmian w działającym systemie.\nBez niego, nie będzie można zapisywać danych, które przetrwają restart."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Obliczanie sumy kontrolnej SHA1 pliku %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Błąd: suma kontrolna SHA1 obrazu Live CD jest nieprawidłowa. Można uruchomić ten program za pomocą parametru --noverify, aby obejść to sprawdzanie."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nie znaleziono"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nieznany plik ISO, pomijanie sprawdzania sum kontrolnych"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Nie można odnaleźć urządzenia %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nie ma wystarczającej ilości wolnego miejsca na tym urządzeniu.\n %dMB ISO + %dMB nadpisu > %dMB wolnego miejsca"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Tworzenie %sMB warstw trwałych"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Urządzenie nie jest jeszcze zamontowane, więc nie da się określić ilości wolnego miejsca."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Pobierz %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Pobieranie ukończone!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nie udało się skopiować %(infile)s do %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Pobieranie nie powiodło się: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Usuwanie istniejącego systemu operacyjnego Live"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Pobieranie %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Napęd jest urządzeniem loopback, pomijanie przywracania MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nie można zmienić praw dostępu do %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Odmontowywanie urządzenia '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Błąd podczas wykrywania urządzenia"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Błąd: Nie można ustawić etykiety lub uzyskać UUID urządzenia. Nie można kontynuować."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Błąd: suma kontrolna SHA1 obrazu Live CD jest nieprawidłowa. Można uruchomić ten program za pomocą parametru --noverify, aby obejść to sprawdzanie."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Wypakowywanie obrazu na wybrane urządzenie..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nie można usunąć poprzedniego systemu operacyjnego Live: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatowanie %(device)s jako FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Sprawdzenie sumy kontrolnej MD5 pliku ISO powiodło się"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nie można usunąć katalogu poprzedniego systemu operacyjnego Live: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Sprawdzenie sumy kontrolnej MD5 pliku ISO nie powiodło się"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Nie można odnaleźć urządzenia %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Jeśli nie wybierzesz istniejącego obrazu ISO Live, wybrane wydanie zostanie dla Ciebie pobrane."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nie można zapisać na %(device)s, pomijam"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Zainstaluj \npoprzez sklonowanie"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Niektóre partycje na wybranym przez Ciebie urządzeniu %(device)s są zamontowane. Zostaną one odłączone przed zaczęciem procesu instalacji."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Zainstaluj Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Nieznany system plików. Urządzenie może wymagać ponownego sformatowania."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Zakończono instalację!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nieobsługiwany system plików: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Zakończono instalację! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Zakończono instalację. Naciśnij OK aby zamknąć ten program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Nie można zamontować urządzenia: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalowanie programu startowego..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nie znaleziono punktów instalacji"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Aktualizacja tego urządzenia %(pretty_name)s nie była możliwa, ponieważ nie została ona stworzona przy użyciu Instalatora Tails. Zamiast tego możesz użyć %(action)s aby zaktualizować Tails na tym urządzeniu."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Utworzenie Live USB nie powiodło się."
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Odmontowywanie urządzenia '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Proszę upewnić się, że rozpakowano cały plik ZIP liveusb-creator przed uruchomieniem tego programu."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Odmontowywanie systemów plików na '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Proszę upewnić się, że klucz USB jest podłączony i sformatowany w systemie plików FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Odmontowywanie '%(udi)s' z '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "%s istnieje mimo demontowania"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Brak miejsca na urządzeniu %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partycjonowanie urządzenia/urządzeń %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nie znaleziono punktów instalacji"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aktualizowanie właściwości partycji systemowej %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nie ma wystarczającej ilości wolnego miejsca na tym urządzeniu.\n %dMB ISO + %dMB nadpisu > %dMB wolnego miejsca"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nieobsługiwane urządzenie '%(device)s', proszę zgłosić błąd."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partycja to FAT16; ograniczanie rozmiaru warstwy do 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Próbujemy kontynuować."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Format plików FAT32 ogranicza wielkość pliku do 4Gb"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Sprawdzanie systemu plików..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partycjonowanie urządzenia/urządzeń %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nie można zmienić etykiety: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Pamięć trwała"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalowanie programu startowego..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Miejsce na trwałe dane (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Proszę potwierdzić wybór urządzenia"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Usuwanie %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Odświeżanie wersji..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s jest już startowa"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Wersje zaktualizowane!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nie można odnaleźć partycji"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Usuwanie %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatowanie %(device)s jako FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Usuwanie istniejącego systemu operacyjnego Live"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Reset głównego sektora startowego %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Wybór pliku ISO obrazu Live"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Ustawianie pliku startowego OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Napęd jest urządzeniem loopback, pomijanie przywracania MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Niektóre partycje na wybranym przez Ciebie urządzeniu %(device)s są zamontowane. Zostaną one odłączone przed zaczęciem procesu instalacji."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Typ źródłowy nie umożliwia weryfikacji sumy kontrolnej ISO MD5, zostanie ona pominięta"
+msgid "Calculating the SHA1 of %s"
+msgstr "Obliczanie sumy kontrolnej SHA1 pliku %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizowanie danych na dysku..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Urządzenie docelowe"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Błąd podczas wykrywania urządzenia"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Urządzenie \"%(pretty_name)s\" ma zbyt mało miejsca dla systemu Tails (wymagane jest przynajmniej %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nie można znaleźć żadnego obsługiwanego urządzenia"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Nie można odczytać wybranego pliku. Proszę poprawić prawa dostępu do niego lub wybrać inny plik."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Proszę upewnić się, że klucz USB jest podłączony i sformatowany w systemie plików FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Wystąpił problem podczas wykonywania następującego polecenia: \"%(command)s\"\nBardziej szczegółowy dziennik błędu został zapisany do pliku \"%(filename)s\""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nieobsługiwany system plików: %s\nProszę wykonać kopię zapasową i sformatować klucz USB w systemie plików FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ten przycisk umożliwia wyszukanie istniejącego obrazu ISO systemu Live, które pobrano wcześniej.\nJeśli żadnego nie wybierzesz, zostanie dla Ciebie pobrana określona wersja."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nie można uzyskać Win32_LogicalDisk; zapytanie win32com nie zwróciło żadnych wyników"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ten przycisk rozpocznie proces tworzenia LiveUSB.\nOznacza to opcjonalnie pobranie określonej wersji (jeśli nie wybrano istniejącej), rozpakowanie obrazu ISO na urządzenie USB, utworzenie miejsca przechowywania danych i instalację programu uruchamiającego."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nie znaleziono"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "To jest dysk USB, na którym chcesz zainstalować swój system Live. Urządzenie musi być sformatowane z systemem plików FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nieznane wydanie: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Pobieranie %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "To jest pasek postępu, który będzie wskazywał, na jakim etapie procesu tworzenia LiveUSB jesteś."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Błąd: Nie można ustawić etykiety lub uzyskać UUID urządzenia. Nie można kontynuować."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "To jest konsola stanu, gdzie zapisywane są wszystkie komunikaty."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Zakończono instalację! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Próbujemy kontynuować."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Wykryto nośnik USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Ostrzeżenie: to narzędzie musi być uruchomione jako administrator. Aby to zrobić, należy nacisnąć prawym przyciskiem myszy ikonę i otworzyć Właściwości. W karcie Zgodność należy zaznaczyć pole wyboru \"Uruchom ten program jako administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nie można zmienić etykiety: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nie można zmienić praw dostępu do %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nie udało się skopiować %(infile)s do %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nie można znaleźć żadnego dysku USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Urządzenie \"%(pretty_name)s\" ma zbyt mało miejsca dla systemu Tails (wymagane jest przynajmniej %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nie można znaleźć żadnego obsługiwanego urządzenia"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nie można odnaleźć partycji"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Instalacja z ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nie można uzyskać Win32_LogicalDisk; zapytanie win32com nie zwróciło żadnych wyników"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Aktualizacja tego urządzenia %(pretty_name)s nie była możliwa, ponieważ nie została ona stworzona przy użyciu Instalatora Tails. Zamiast tego możesz użyć %(action)s aby zaktualizować Tails na tym urządzeniu."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Odświeżanie wersji..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Wersje zaktualizowane!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Zakończono instalację!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nie można zamontować urządzenia"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nie można zamontować urządzenia: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Proszę potwierdzić wybór urządzenia"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nie można usunąć katalogu poprzedniego systemu operacyjnego Live: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Zamierzasz zainstalować Tails na %(size)s %(vendor)s %(model)s urządzenie (%(device)s). Wszystkie dane na tym nośniku zostaną utracone. Kontynuować?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nie można usunąć poprzedniego systemu operacyjnego Live: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Zamierzasz uaktualnić Tails na %(parent_size)s %(vendor)s %(model)s urządzenie (%(device)s). Objętość tego urządzenia pozostanie niezmieniona. Kontynuować?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Pobieranie ukończone!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Pobieranie nie powiodło się: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Możesz spróbować ponownie, aby wznowić pobieranie"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nie można zresetować głównego sektora startowego (MBR). Być może nie masz zainstalowanej paczki `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Nie można odczytać wybranego pliku. Proszę poprawić prawa dostępu do niego lub wybrać inny plik."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nie można użyć wybranego pliku. Łatwiej będzie po przeniesieniu pliku ISO do głównego katalogu napędu (np. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nie można zapisać na %(device)s, pomijam"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nieznany plik ISO, pomijanie sprawdzania sum kontrolnych"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Nieznany wyjątek dbus podczas montowania urządzenia: %(message)s"
+msgid "%(filename)s selected"
+msgstr "Wybrano %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Nieznany system plików. Urządzenie może wymagać ponownego sformatowania."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nieznane wydanie: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Odmontowywanie '%(udi)s' z '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Odmontowywanie systemów plików na '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nieobsługiwane urządzenie '%(device)s', proszę zgłosić błąd."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nieobsługiwany system plików: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nieobsługiwany system plików: %s\nProszę wykonać kopię zapasową i sformatować klucz USB w systemie plików FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Aktualizowanie właściwości partycji systemowej %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Aktualizuj \npoprzez sklonowanie"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Zainstaluj Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Aktualizuj \nz obrazu ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Użyj istniejącego obrazu ISO systemu Live"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Sprawdzanie sumy kontrolnej MD5 pliku ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Sprawdzanie sumy kontrolnej SHA1 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Sprawdzanie sumy kontrolnej SHA256 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Sprawdzanie systemu plików..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Ostrzeżenie: utworzenie nowej warstwy trwałości usunie istniejącą."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Ostrzeżenie: to narzędzie musi być uruchomione jako administrator. Aby to zrobić, należy nacisnąć prawym przyciskiem myszy ikonę i otworzyć Właściwości. W karcie Zgodność należy zaznaczyć pole wyboru \"Uruchom ten program jako administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Dokonano zapisu na urządzeniu z prędkością %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Zamierzasz zainstalować Tails na %(size)s %(vendor)s %(model)s urządzenie (%(device)s). Wszystkie dane na tym nośniku zostaną utracone. Kontynuować?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Zamierzasz uaktualnić Tails na %(parent_size)s %(vendor)s %(model)s urządzenie (%(device)s). Objętość tego urządzenia pozostanie niezmieniona. Kontynuować?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Używasz starej wersji syslinux-extlinux która nie obsługuje systemu plików ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Możesz spróbować ponownie, aby wznowić pobieranie"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Tę aplikację można uruchomić tylko jako root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "albo"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/pms/pms.po b/pms/pms.po
index e0047aa..2da7915 100644
--- a/pms/pms.po
+++ b/pms/pms.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Piemontese (http://www.transifex.com/otf/torproject/language/pms/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: pms\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ps/ps.po b/ps/ps.po
index 6c946b4..b24a2d3 100644
--- a/ps/ps.po
+++ b/ps/ps.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Pushto (http://www.transifex.com/otf/torproject/language/ps/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ps\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/pt/pt.po b/pt/pt.po
index 0e7021c..d035190 100644
--- a/pt/pt.po
+++ b/pt/pt.po
@@ -20,9 +20,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-04-14 14:16+0000\n"
-"Last-Translator: Manuela Silva <manuela.silva at sky.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Portuguese (http://www.transifex.com/otf/torproject/language/pt/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -30,591 +30,551 @@ msgstr ""
"Language: pt\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e Instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Deve executar esta aplicação como 'root'"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"instalar do ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "A extrair a imagem live para o dispositivo de destino..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instalador %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Gravado para o dispositivo a %(speed)d MB/seg"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s selecionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "A configurar o ficheiro de arranque do OLPC ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Ocorreu um erro ao executar o seguinte comando: `%(command)s`.\nFoi guardado um registo detalhado do erro no '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "A verificar a soma de verificação SHA1 da imagem do CD Live..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s já é de arranque"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "A verificar a soma de verificação SHA256 da imagem do CD Live..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Precisa de ajuda? Leia a <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentação</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instale o Tails em outra pen USB copiando o sistema Tails que está a usar atualmente..</li>\n\n<li>A pen USB onde você vai instalar será formatada e todos os dados serão perdidos.</li>\n\n<li>O armazenamento encriptado persistente da pen USB Tails que está a usar não é copiado.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atualize outra pen USB Tails para a mesma versão do Tails que está atualmente a utilizar.</li>\n\n<li>O armazenamento persistente encriptado da pen USB Tails que atualizou é preservado.</li>\n\n<li>O armazenamento persistente encriptado da pen USB Tails que está atualmente a utilizar não é copiado.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atualize outra pen USB Tails para a versão de uma imagem ISO.</li>\n\n<li>O armazenamento persistente encriptado da pen USB Tails que atualizou é preservado.</li>\n\n<li>O armazenamento persistente encriptado da pen USB Tails que está atualmente a utilizar não é copiado.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Explorar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Ao alocar espaço extra na sua pen USB para a área permanente, poderá armazenar dados e efetuar modificações permanentes para o seu sistema operativo live. Sem este, não poderá guardar dados que irão permanecer depois de reiniciar."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "A calcular o SHA1 de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Erro: A assinatura digital SHA1 do seu CD Live está incorreta. Pode executar este programa com o argumento --noverify para evitar esta verificação."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Não é possível encontrar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO desconhecido, a ignorar soma de verificação"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Não é possível encontrar %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Não existe espaço livre suficiente no dispositivo.\n%dMB ISO + %dMB overlay > %dMB espaço livre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "A criar %sMB da área permanete ..."
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "O dispositivo ainda não está montado, e assim, não é possível determinar o espaço disponível."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Transferir %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Transferência completa!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Não foi possível copiar %(infile)s para %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "A transferência falhou:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "A remover o SO Live existente"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "A transferir %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "A unidade é um 'loopback', a ignorar o reinício do MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Não foi possível executar chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "A entrar em unmount_device para '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Erro ao examinar o dispositivo"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Erro: Não é possível definir o nome ou obter o UUID do seu dispositivo. Não é possível continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Erro: A assinatura digital SHA1 do seu CD Live está incorreta. Pode executar este programa com o argumento --noverify para evitar esta verificação."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "A extrair a imagem live para o dispositivo de destino..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Não é possível remover o ficheiro do LiveOS anterior: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "A formatar o %(device)s como FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "A verificação da assinatura digital MD5 do ISO foi aprovada"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Não é possível remover a diretoria do LiveOS anterior: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Não foi possível verificar a assinatura digital MD5 do ISO"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Não é possível encontrar %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Se não selecionar um ISO Live existente, a versão selecionada será transferida."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Não é possível gravar no %(device)s, a ignorar."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalar\nefetuando o clone"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algumas partições do dispositivo %(device)s estão montadas. Elas serão desmontadas antes que o processo de instalação comece."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalar o Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistema de ficheiros desconhecido. Poderá ter que reformatar o seu dispositivo."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalação completa!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Sistema de ficheiros não suportado: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalação completa! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "A instalação foi concluída. Clique em \"CONFIRMAR\" para fechar este programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Não é possível montar o dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "A instalar o carregador de arranque..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Não foram encontrados pontos de montagem"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "É impossível atualizar o dispositivo %(pretty_name)s porque este não foi criado com o instalador do Tails. Em vez disso, deverá utilizar %(action)s para atualizar o Tails neste dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "A criação de 'USB Live' falhou!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "A entrar em unmount_device para '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Certifique-se que extrai todo o ficheiro zip liveusb-creator antes de executar este programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "A desmontar o sistema de ficheiros montados no '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Certifique-se que a pen USB está ligada e formatada com o sistema de ficheiros FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "A desmontar '%(udi)s' no '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "O ponto de montagem %s existe depois de desmontado"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Espaço insuficiente no dispositivo %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "A particionar o dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Não foram encontrados pontos de montagem"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "A atualizar as propriedades da partição do sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Não existe espaço livre suficiente no dispositivo.\n%dMB ISO + %dMB overlay > %dMB espaço livre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dispositivo '%(device)s' não suportado, por favor, comunique um bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "A partição é FAT16; A restringir o tamanho da área para 2GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "A tentar continuar de qualquer forma."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "A partição é FAT32; A restringir o tamanho da área para 4GB"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "A verificar o sistema de ficheiros ..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "A particionar o dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Não é possível alterar o nome do volume: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Armazenamento Permanente"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "A instalar o carregador de arranque..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Armazenamento Permanente (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Por favor, confirme a seleção do seu dispositivo"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "A remover %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "A atualizar os lançamentos..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s já é de arranque"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Lançamentos atualizados!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Não foi possível encontrar a partição"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "A remover %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "A formatar o %(device)s como FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "A remover o SO Live existente"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "A reiniciar o 'Master Boot Record' de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selecionar o ISO Live"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "A configurar o ficheiro de arranque do OLPC ..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "A unidade é um 'loopback', a ignorar o reinício do MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algumas partições do dispositivo %(device)s estão montadas. Elas serão desmontadas antes que o processo de instalação comece."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "O tipo de fonte não suporta a verificação da assinatura digital MD5 do ISO, a ignorar"
+msgid "Calculating the SHA1 of %s"
+msgstr "A calcular o SHA1 de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "A sincronizar os dados no disco..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo de destino"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Erro ao examinar o dispositivo"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "O dispositivo \"%(pretty_name)s\" é muito pequeno para instalar o Tails (é necessário pelo menos %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Não foi possível encontrar um dispositivo suportado"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "O ficheiro selecionado não é legível. Por favor corrija as permissões ou selecione outro ficheiro."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Certifique-se que a pen USB está ligada e formatada com o sistema de ficheiros FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Ocorreu um erro ao executar o seguinte comando: `%(command)s`.\nFoi guardado um registo detalhado do erro no '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de ficheiros não suportado: %s\nPor favor, efetue uma cópia de segurança e formate a sua pen USB com o sistema de ficheiros FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Este botão permite-lhe procurar por um ISO do sistema Live que já transferiu. Se não selecionar um, a versão selecionada será transferida."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Não foi possível obter o Win32_LogicalDisk; a consulta win32com não devolveu quaisquer resultados"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Este botão irá iniciar o processo de criação da USB Live. O processo envolve a transferência opcional de uma versão (se não tiver sido selecionada uma), extração do ISO para o dispositivo USB, criação do armazenamento persistente, e instalação do 'bootloader'."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Não é possível encontrar"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Esta é a pen USB onde quer instalar o seu sistema Live. O dispositivo tem de ser formatado como FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Lançamento desconhecido: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "A transferir %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Esta é a barra de progresso que indica o estado da criação da LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Erro: Não é possível definir o nome ou obter o UUID do seu dispositivo. Não é possível continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Esta é a consola de estado, onde todas as mensagens serão guardadas."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalação completa! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "A tentar continuar de qualquer forma."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Encontrada drive USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Aviso: esta ferramenta precisa de ser executada como um Administrador. Para o fazer, clique direito no ícone e abra as Propriedades. No separador 'Compatibilidade', selecione \"Executar como Administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Não é possível alterar o nome do volume: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Não foi possível executar chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Não foi possível copiar %(infile)s para %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Não foi possível encontrar um dispositivo USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "O dispositivo \"%(pretty_name)s\" é muito pequeno para instalar o Tails (é necessário pelo menos %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Não foi possível encontrar um dispositivo suportado"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Não foi possível encontrar a partição"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"instalar do ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Não foi possível obter o Win32_LogicalDisk; a consulta win32com não devolveu quaisquer resultados"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "É impossível atualizar o dispositivo %(pretty_name)s porque este não foi criado com o instalador do Tails. Em vez disso, deverá utilizar %(action)s para atualizar o Tails neste dispositivo."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "A atualizar os lançamentos..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Lançamentos atualizados!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalação completa!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Não é possível montar o dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Não é possível montar o dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Por favor, confirme a seleção do seu dispositivo"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Não é possível remover a diretoria do LiveOS anterior: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Está prestes a instalar Tails no dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Toda a informação do dispositivo selecionado será perdida. Deseja continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Não é possível remover o ficheiro do LiveOS anterior: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Vai proceder à actualização do Tails no dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Qualquer volume persistente permanecerá inalterado. Deseja continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Transferência completa!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "A transferência falhou:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Pode tentar novamente para retomar a sua transferência"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Não é possível reiniciar o MBR. Poderá não ter o pacote de instalação `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "O ficheiro selecionado não é legível. Por favor corrija as permissões ou selecione outro ficheiro."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Não é possível utilizar o ficheiro selecionado. É capaz de ter mais sorte se mover o seu ficheiro ISO para a raiz da sua unidade (ex.: C:\\)."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Não é possível gravar no %(device)s, a ignorar."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO desconhecido, a ignorar soma de verificação"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Exceção dbus desconhecida enquanto tentava montar o dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s selecionado"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistema de ficheiros desconhecido. Poderá ter que reformatar o seu dispositivo."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Lançamento desconhecido: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "A desmontar '%(udi)s' no '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "A desmontar o sistema de ficheiros montados no '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dispositivo '%(device)s' não suportado, por favor, comunique um bug."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistema de ficheiros não suportado: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de ficheiros não suportado: %s\nPor favor, efetue uma cópia de segurança e formate a sua pen USB com o sistema de ficheiros FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "A atualizar as propriedades da partição do sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Atualizar\nefetuando o clone"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalar o Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Atualizar\na partir do ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Utilize o ISO do sistema Live existente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "A verificar soma de verificação MD5 do ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "A verificar a soma de verificação SHA1 da imagem do CD Live..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "A verificar a soma de verificação SHA256 da imagem do CD Live..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "A verificar o sistema de ficheiros ..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Aviso: Se criar uma nova área permanente irá apagar a existente."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Aviso: esta ferramenta precisa de ser executada como um Administrador. Para o fazer, clique direito no ícone e abra as Propriedades. No separador 'Compatibilidade', selecione \"Executar como Administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Gravado para o dispositivo a %(speed)d MB/seg"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Está prestes a instalar Tails no dispositivo %(size)s %(vendor)s %(model)s (%(device)s). Toda a informação do dispositivo selecionado será perdida. Deseja continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Vai proceder à actualização do Tails no dispositivo %(parent_size)s %(vendor)s %(model)s (%(device)s). Qualquer volume persistente permanecerá inalterado. Deseja continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Está a utilizar uma versão antiga do syslinux-extlinux que não suporta o sistema de ficheiros ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Pode tentar novamente para retomar a sua transferência"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Deve executar esta aplicação como 'root'"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ou"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/pt_BR/pt_BR.po b/pt_BR/pt_BR.po
index dc768f1..5fb0d6e 100644
--- a/pt_BR/pt_BR.po
+++ b/pt_BR/pt_BR.po
@@ -3,7 +3,7 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# Communia <ameaneantie at riseup.net>, 2013-2016
+# Communia <ameaneantie at riseup.net>, 2013-2017
# carlo giusepe tadei valente sasaki <carlo.gt.valente at gmail.com>, 2014
# carlo giusepe tadei valente sasaki <carlo.gt.valente at gmail.com>, 2014
# Carlos Villela, 2014
@@ -27,8 +27,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-12-04 23:53+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-02 19:31+0000\n"
"Last-Translator: Communia <ameaneantie at riseup.net>\n"
"Language-Team: Portuguese (Brazil) (http://www.transifex.com/otf/torproject/language/pt_BR/)\n"
"MIME-Version: 1.0\n"
@@ -37,591 +37,551 @@ msgstr ""
"Language: pt_BR\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonar e Instalar\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Você deve executar este aplicativo como Administrador"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalar a partir de uma ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extraindo imagem Live para o dispositivo indicado..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instalador do %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Gravou no dispositivo a uma velocidade de %(speed)d MB/s"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s selecionado"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Configurando o arquivo de inicialização do OLPC ..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Problema encontrado ao executar o seguinte comando: `%(command)s`.\nUm arquivo de registro mais detalhado foi criado em '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verificando o SHA1 (Secure Hash Algorithm-1) da imagem do LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s pronto para iniciar"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Examinando a soma de verificação do SHA256 (Secure Hash Algorithm-256) da imagem do LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Você precisa de ajuda? Leia <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentação</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalar o Tails em outro drive USB, copiando o sistema Tails que você está usando agora..</li>\n\n<li> O drive USB que você usar será formatado e todos os dados serão perdidos.</li>\n\n<li>O volume de armazenamento criptografado Persistent do drive USB do Tails que você está usando agora não será copiado.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atualizar outra unidade USB-Tails para a mesma versão do Tails que você está usando agora.</li>\n\n<li>O espaço de armazenamento persistente criptografado da unidade USB-Tails a ser atualizado será mantido.</li>\n\n<li>O espaço de armazenamento persistente criptografado da unidade USB-Tails que você está usando agora não será copiado.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Atualizar outra unidade USB-Tails a partir de uma imagem ISO.</li>\n\n<li>O espaço de armazenamento persistente criptografado da unidade USB-Tails a ser atualizado será mantido.</li>\n\n<li>O espaço de armazenamento persistente criptografado na unidade USB-Tails que você está usando agora não será copiada.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+N"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Navegar"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Reservando espaço extra para uma sobrecamada persistente na memória USB, você poderá armazenar dados e fazer modificações permanentes no seu sistema operacional. Caso contrário, você não poderá salvar os dados que restarem após uma reinicialização."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculando o SHA1 (Secure Hash Algorithm) de %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Erro: o SHA1 do seu LiveCD é inválido. Você pode executar este programa com a opção `--noverify' para contornar essa verificação."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Não foi possível localizar"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Imagem ISO desconhecida, ignorando o exame da soma de verificação "
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Não foi possível localizar o dispositivo %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Não há espaço livre suficiente no dispositivo.\n%dMB ISO + %dMB superfície > %dMB de espaço livre"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Criando sobrecamada persistente de %sMB..."
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "O dispositivo ainda não está montado, por isso não podemos determinar a sua quantidade de espaço livre."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Fazer o download %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download concluído!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Não foi possível copiar %(infile)s para %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "O download falhou: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Removendo o sistema operacional Live existente"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Fazendo download %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "O dispositivo é um loopback. Pulando a reinicialização do MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Não foi possível modificar as permissões de %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Adicionando dispositivo_desmontado ao '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Erro ao sondar o dispositivo"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Erro: não foi possível definir o rótulo ou obter o UUID (Universal Unique identifier) do seu dispositivo. Impossível continuar."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Erro: o SHA1 do seu LiveCD é inválido. Você pode executar este programa com a opção `--noverify' para contornar essa verificação."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extraindo imagem Live para o dispositivo indicado..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Não foi possível remover um arquivo do sistema operacional Live anterior: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatando %(device)s como FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "A soma de verificação MD5 da imagem ISO foi bem-sucedida"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Não foi possível remover um diretório do sistema operacional Live anterior: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "O exame da soma de verificação MD5 da imagem ISO falhou"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Não foi possível localizar o dispositivo %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Se você não selecionar uma Live ISO já existente, a versão selecionada será baixada para você."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Não foi possível gravar no dispositivo %(device)s. Pulando"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalar\npor clonagem"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Algumas partições do dispositivo indicado %(device)s estão montadas. Elas serão desmontadas antes do processo de instalação iniciar."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalar Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistema de arquivos desconhecido. Talvez o seu dispositivo precise ser formatado novamente."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalação concluída!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Sistema de arquivos não possui suporte: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalação concluída! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Exceção GLib desconhecida ao tentar montar o dispositivo: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "A instalação foi concluída. Clique em OK para fechar este programa."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Não foi possível montar o dispositivo: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalando reinicializador..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nenhum ponto de montagem encontrado"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Impossível atualizar o dispositivo %(pretty_name)s porque ele não foi criado usando o Instalador Tails. Tente utilizar %(action)s para atualizar o Tails neste dispositivo."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "A criação da LiveUSB falhou!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Adicionando dispositivo_desmontado ao '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Tenha certeza de ter extraído todos os arquivos .zip do liveusb-creator antes de executar este programa."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Desmontando os sistemas de arquivos montados em '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Certifique-se de que a sua memória USB esteja conectada e formatada com o sistema de arquivos FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Desmontando '%(udi)s' no (s) '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "O ponto de montagem %s existe mesmo após ter sido desmontado"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Não há espaço suficiente no dispositivo %(device)s."
+msgid "Partitioning device %(device)s"
+msgstr "Particionando o dispositivo %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nenhum ponto de montagem encontrado"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Atualizando as propriedades da partição de sistema %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Não há espaço livre suficiente no dispositivo.\n%dMB ISO + %dMB superfície > %dMB de espaço livre"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Dispositivo incompatível '%(device)s', por favor reporte o bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "A partição é FAT16; Restringindo o tamanho da sobrecamada a 2GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Tentando continuar de qualquer maneira."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "A partição é FAT32; Restringindo o tamanho da sobrecamada a 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verificando o sistema de arquivos..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Particionando o dispositivo %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Não foi possível alterar o rótulo do dispositivo: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Armazenamento Persistente"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalando reinicializador..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Armazenamento permanente (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Não foi possível encontrar o módulo '%s' COM32 "
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Por favor, confirme a seleção do seu dispositivo"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Removendo %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Atualizando versões..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s pronto para iniciar"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versões atualizadas!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Não foi possível localizar a partição"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Removendo %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatando %(device)s como FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Removendo o sistema operacional Live existente"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Não foi possível encontrar syslinux' gptmbr.bin"
+
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Lendo MBR extraído de %s"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Não foi possível ler o MBR extraído de %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Reinicializando o Master Boot Record (MBR) de %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Selecione Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Configurando o arquivo de inicialização do OLPC ..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "O dispositivo é um loopback. Pulando a reinicialização do MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Algumas partições do dispositivo indicado %(device)s estão montadas. Elas serão desmontadas antes do processo de instalação iniciar."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tipo de código fonte não permite examinar a soma de verificação MD5 (Message-Digest algorithm 5) da ISO. Pulando"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculando o SHA1 (Secure Hash Algorithm) de %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizando dados no disco..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispositivo de destino"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Erro ao sondar o dispositivo"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "O dispositivo \"%(pretty_name)s\" é muito restrito para instalar Tails (no mínimo, %(size)s GB são necessários)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Não foi possível encontrar nenhum dispositivo compatível"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "O arquivo selecionado não pode ser lido. Por favor, corrija suas permissões ou selecione outro arquivo."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Certifique-se de que a sua memória USB esteja conectada e formatada com o sistema de arquivos FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Problema encontrado ao executar o seguinte comando: `%(command)s`.\nUm arquivo de registro mais detalhado foi criado em '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistema de arquivos não possui suporte: %s\nPor favor, faça um backup e formate a sua memória USB com o sistema de arquivos FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Este botão permite procurar um sistema Live ISO cujo download já foi feito. Se nenhuma ISO for selecionada, o download de uma versão será feito para você automaticamente."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Não foi possível obter Win32_LogicalDisk; a consulta com win32com não obteve nenhum resultado"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Este botão iniciará o processo de criação da LiveUSB. Opcionalmente, o download de uma versão será feito (se nenhuma versão existente tiver sido selecionada), extraindo a ISO na memória USB, criando uma sobrecamada persistente e instalando o inicializador."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Não foi possível localizar"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Esta é a memória USB na qual você deseja instalar um sistema Live. Este dispositivo deve estar formatado com o sistema de arquivos FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Verifique se você extraiu todo o arquivo tails-installer zip antes de executar este programa."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Versão desconhecida: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Fazendo download %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Esta é a barra de progressão que vai indicar o quanto falta para terminar o processo de criação da LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Erro: não foi possível definir o rótulo ou obter o UUID (Universal Unique identifier) do seu dispositivo. Impossível continuar."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Este é o console de status, no qual todas as mensagens são registradas."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalação concluída! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Tentando continuar de qualquer maneira."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "A instalação do Tails falhou!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Atenção: Esta ferramenta deve ser executada pelo Administrador. Para isso, clique com o botão direito no ícone e abra a função 'Propriedades'. Na janela Compatibilidade, marque a opção \"Executar este programa como Administrador\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails Installer"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "memória USB encontrada"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Não foi encontrado nenhum dispositivo adequado à instalação do Tails"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Não foi possível alterar o rótulo do dispositivo: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Por favor, plugue um volume USB ou um cartão SD de ao menos %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Não foi possível modificar as permissões de %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Não foi possível copiar %(infile)s para %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Não foi possível localizar nenhuma memória USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "O dispositivo \"%(pretty_name)s\" é muito restrito para instalar Tails (no mínimo, %(size)s GB são necessários)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Não foi possível encontrar nenhum dispositivo compatível"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Instalação por clonagem\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Não foi possível localizar a partição"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalar a partir de uma ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Não foi possível obter Win32_LogicalDisk; a consulta com win32com não obteve nenhum resultado"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Impossível atualizar o dispositivo %(pretty_name)s porque ele não foi criado usando o Instalador Tails. Tente utilizar %(action)s para atualizar o Tails neste dispositivo."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Um erro ocorreu durante a instalacao do Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Atualizando versões..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versões atualizadas!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalação concluída!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Instalação concluída."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Não foi possível montar o dispositivo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Não foi possível montar o dispositivo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Por favor, confirme a seleção do seu dispositivo"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Não foi possível remover um diretório do sistema operacional Live anterior: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Você está prestes a instalar o Tails no %(size)s %(vendor)s %(model)s dispositivo (%(device)s). Todos os dados contidos no dispositivo selecionado serão perdidos. Continuar?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Não foi possível remover um arquivo do sistema operacional Live anterior: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Você está prestes a atualizar o Tails no %(parent_size)s %(vendor)s %(model)s dispositivo (%(device)s). Se houver volumes persistentes neste dispositivo, eles permanecerão inalterados. Continuar?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download concluído!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "O download falhou: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Você pode tentar recomeçar o download novamente"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Não foi possível reinicializar o MBR. Talvez você não possua o pacote `syslinux' instalado."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "O arquivo selecionado não pode ser lido. Por favor, corrija suas permissões ou selecione outro arquivo."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Não foi possível utilizar o arquivo selecionado. Talvez você tenha mais sorte se mover a imagem ISO para a raiz do seu dispositivo (por exemplo, `C:\\')"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Não foi possível escrever no dispositivo %(device)s. Pulando"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Imagem ISO desconhecida, ignorando o exame da soma de verificação "
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Exceção d-bus desconhecida ao tentar montar o dispositivo: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s selecionado"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistema de arquivos desconhecido. Talvez o seu dispositivo precise ser formatado novamente."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Não foi possível encontrar nenhum Sistema Operacional Live em ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Versão desconhecida: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Desmontando '%(udi)s' no (s) '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Houve um problema ao executar `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Desmontando os sistemas de arquivos montados em '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' nao existe"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Dispositivo incompatível '%(device)s', por favor reporte o bug."
+msgid "'%s' is not a directory"
+msgstr "'%s' nao é um diretório"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistema de arquivos não possui suporte: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Ignorando '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistema de arquivos não possui suporte: %s\nPor favor, faça um backup e formate a sua memória USB com o sistema de arquivos FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "Houve um problema ao executar `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Atualizando as propriedades da partição de sistema %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Não foi abrir o dispositivo para registrar. "
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Atualizar\npor clonagem"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Usar a ISO do sistema Live ISO já existente:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Selecionar uma distribuicao para fazer download:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Dispositivo Indicado:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalar Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Atualizar \nde uma ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "Para executar o Tails Installer, você precisa de uma imagem ISO, que pode ser baixada do site do Tails: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Usar a ISO do sistema Live existente"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Instalar"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Examinando a soma de verificação MD5 da imagem ISO"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Instalar Tails em um novo volume USB."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verificando o SHA1 (Secure Hash Algorithm-1) da imagem do LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• O volume USB utilizado foi formatado e todos os dados foram perdidos."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Examinando a soma de verificação do SHA256 (Secure Hash Algorithm-256) da imagem do LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Atualizar"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verificando o sistema de arquivos..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Atualizar o volume USB Tails para uma versão em imagem ISO."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Aviso: A criação de uma nova sobrecamada persistente excluirá a atual."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• Após a atualização do volume USB Tails, o volume de armazenamento criptografado persistente foi preservado."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Atenção: Esta ferramenta deve ser executada pelo Administrador. Para isso, clique com o botão direito no ícone e abra a função 'Propriedades'. Na janela Compatibilidade, marque a opção \"Executar este programa como Administrador\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Precisa de ajuda?Leia a <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentação</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Gravou no dispositivo a uma velocidade de %(speed)d MB/s"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Instalação por clonagem"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Você está prestes a instalar o Tails no %(size)s %(vendor)s %(model)s dispositivo (%(device)s). Todos os dados contidos no dispositivo selecionado serão perdidos. Continuar?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Instalar o Tails em um outro volume USB, copiando o sistema Tails que você está utilizando."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Você está prestes a atualizar o Tails no %(parent_size)s %(vendor)s %(model)s dispositivo (%(device)s). Se houver volumes persistentes neste dispositivo, eles permanecerão inalterados. Continuar?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• Não foi feita cópia do volume de armazenamento criptografado persistente do volume USB Tails que você está usando."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Atualização por clonagem"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Você está usando uma versão antiga do syslinux-extlinux, que não é compatível com o sistema de arquivos ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Atualizar um outro volume USB Tails para a mesma versão do Tails que você está usando atualmente."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Você pode tentar recomeçar o download novamente"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Atualizar a partir de uma ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Você deve executar este aplicativo como Administrador"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Atualizar um outro volume USB Tails para a versão de uma imagem ISO."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ou"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Precisa de ajuda?Leia a <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentação</a>"
diff --git a/ro/ro.po b/ro/ro.po
index 92b05e0..4013c95 100644
--- a/ro/ro.po
+++ b/ro/ro.po
@@ -13,9 +13,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: kyx <mihaidiaconu at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Romanian (http://www.transifex.com/otf/torproject/language/ro/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -23,591 +23,551 @@ msgstr ""
"Language: ro\n"
"Plural-Forms: nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1));\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clonază&Instalează\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Trebuie să rulați aplicația ca root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "Instaleaza din ISO"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Scriu la %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ales"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Setez OLPC boot file..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "A fost o problemă cu execuția următoarei comenzi: `%(command)s`.\nO eroare mai detaliată a fost scrisă la '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verific SHA1 checksum a imaginii LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s deja bootabil"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verific SHA256 checksum a imaginii LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n\np, li { white-space: pre-wrap; }\n\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Aveți nevoie de ajutor? Citiți <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentația</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instalați Tails pe alt stick USB prin copierea sistemului Tails pe care îl folosiți în prezent.</li>\n\n<li>Stick-ul USB pe care faceți instalarea este formatat și toate datele pierdute.</li>\n\n<li>Stocarea persistentă criptată a stick-ului USB Tails pe care îl folosiți în prezent nu este copiată.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizați alt stick USB Tails la aceeași versiune de Tails pe care o folosiți în prezent.</li>\n\n<li>Stocarea persistentă criptată a stick-ului USB Tails pe care îl actualizați este păstrată.</li>\n\n<li>Stocarea persistentă criptată a stick-ului USB Tails pe care îl folosiți în prezent nu este copiată.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Actualizați alt stick USB Tails la versiunea unei imagini ISO.</li>\n\n<li>Stocarea persistentă criptată a stick-ului USB Tails pe care îl actualizați este păastrată.</li>\n\n<li>Stocarea persistentă criptată a stick-ului USB Tails pe care îl folosiți în prezent nu este copiată.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Răsfoieşte"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Alocînd spațiu suplimentar pe stickul USB pentru un persistent overlay veți putea stoca date și face modificări permanente sistemului de operare live. Fără aceasta, nu veți putea salva date care să persiste după reboot."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculez SHA1 a %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Eroare: SHA1 a Live CD este invalidă. Puteți rula acest program cu argumentul --noverify pentru a trece de această verificare."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nu găsesc"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO necunoscut, trec de verificarea checksum"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Nu găsesc device %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nu este suficient spațiu liber pe device.\n%dMB ISO + %dMB overlay > %dMB spațiu liber"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creez %sMB de overlay persistent"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Aparatul nu este încă montat, sau nu pot determina canitatea de spațiu liber."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Descarcă %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Descărcare completă!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nu pot copia %(infile)s la %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Descărcare eșuată!"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Șterg Live OS existent"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Descarc %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drive este un loopback, ignor MBR reset"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nu pot chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Introduc unmount_device pentru '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Eroare probing device"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Eroare: Nu pot seta eticheta sau obține UUID dispozitivului dumneavoastră. Nu pot continua."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Eroare: SHA1 a Live CD este invalidă. Puteți rula acest program cu argumentul --noverify pentru a trece de această verificare."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extrag imagine live pe deviceul țintă..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nu pot șterge fișier din fostul LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatez %(device)s ca FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum trecută"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nu pot sterge folder din fostul LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verificarea ISO MD5 checksum eșuată"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Nu găsesc device %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Dacă nu alegeți un Live ISO existent, versiunea aleasă va fi descărcată pentru dvs."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nu pot scrie pe %(device)s, ignor."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instalare\nprin clonare"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instalez Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "filesystem necunoscut. Aparatul ar putea să aibă nevoie să fie reformatat."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalare completa!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "filesystem nesuportat: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalare completă! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalarea este completă. Apăsați OK pentru a închide acest program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Nu pot monta device: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Instalez bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Nu am găsit puncte de montare"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Este imposibil de actualizat dispozitivul %(pretty_name)s pentru ca nu a fost creat cu ajutorul Tails Installer.Ar trebui sa utilizati %(action)s pentru a petea actualiza dispozitivul dat."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Crearea LiveUSB esuată!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Introduc unmount_device pentru '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Fiți sigur că ați extras tot fișierul liveusb-creator zip înainte de a rula acest program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Asigurați-vă că cheia USB este pus și formatat cu filesystem FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Demontez '%(udi)s' pe '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Montarea %s există după demontare"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Nu există spațiu disponibil pe dispozitiv %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partiționez device %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Nu am găsit puncte de montare"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Actualizez proprietățile partiției de sistem %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nu este suficient spațiu liber pe device.\n%dMB ISO + %dMB overlay > %dMB spațiu liber"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Device nesuportat '%(device)s', raportați un bug."
+
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partiția este FAT16; Restricționare dimensiune la 2G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verific filesystem..."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partiția este FAT32. Restrictionez overlay la 4G"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nu pot schimba eticheta volumului: %(message)s"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Instalez bootloader..."
+
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partiționez device %(device)s"
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Stocare persistentă"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Șterg %(file)s"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Stocare persistentă (0MB)"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s deja bootabil"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Confirmați alegerea device"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nu pot găsi partiția"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Împrospătez versiunile..."
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatez %(device)s ca FAT32"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versiuni actualizate!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Removing %(file)s"
-msgstr "Șterg %(file)s"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Șterg Live OS existent"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetez Master Boot Record al %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Alegeți Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Setez OLPC boot file..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drive este un loopback, ignor MBR reset"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Anumite partiții ale device țintă %(device)s sînt montate. Ele vor fi demontate înainte de începerea instalării."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tipul de sursă nu suportă verificarea ISO MD5 checksum, ignor"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculez SHA1 a %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sincronizez datele pe disc..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Dispozitiv țintă"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Eroare probing device"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Dispozitivul \"%(pretty_name)s\" are prea putina memorie libera pentru a instala Tails (cel putin %(size)s GB este necesar)"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nu pot găsi un device suportat"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Fișierul ales nu poate fi citit. Corectați accesul sau alegeți altul."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Asigurați-vă că cheia USB este pus și formatat cu filesystem FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "A fost o problemă cu execuția următoarei comenzi: `%(command)s`.\nO eroare mai detaliată a fost scrisă la '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "filesystem nesuportat: %s\nFaceți backup și formatați cheia USB cu filesystem FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Acest buton vă permite să navigați pentru un Live system ISO descărcat anterior. Dacă nu alegeți unul, o versiune va fi descărcată automat."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nu pot obține Win32_LogicalDisk; win32com query nu a întors nici un rezultat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Acest buton va începe crearea LiveUSB. Aceasta presupune descărcarea opțională a unei versiuni (dacă nu a fost selectată una deja existentă) extrăgînd ISO pe stickul USB, făcînd persistent overlay and instalînd bootloaderul."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nu găsesc"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Acesta este stickul USB pe care vreți să instalați sistemul Live. Acest aparat trebuie să fie formatat cu filesystem FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Lansare necunoscută: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Descarc %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Aceasta este bara de progres care va indica unde ne aflăm în procesul de creare LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Eroare: Nu pot seta eticheta sau obține UUID dispozitivului dumneavoastră. Nu pot continua."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Aceasta este consola de statut, unde toate mesajele sînt scrise."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalare completă! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Încerc să continui oricum."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Avertisment: Acest instrument trebuie să fie rulat ca administrator. Pentru a face acest lucru, dați clic dreapta pe pictogramă și deschideți Proprietăți. Sub fila Compatibilitate, bifați căsuța \"Rulați acest program ca administrator\"."
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Dispozitiv USB găsit"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nu pot schimba eticheta volumului: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nu pot chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nu pot copia %(infile)s la %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nu putem descoperi nici un dispozitiv USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Dispozitivul \"%(pretty_name)s\" are prea putina memorie libera pentru a instala Tails (cel putin %(size)s GB este necesar)"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nu pot găsi un device suportat"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nu pot găsi partiția"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "Instaleaza din ISO"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nu pot obține Win32_LogicalDisk; win32com query nu a întors nici un rezultat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Este imposibil de actualizat dispozitivul %(pretty_name)s pentru ca nu a fost creat cu ajutorul Tails Installer.Ar trebui sa utilizati %(action)s pentru a petea actualiza dispozitivul dat."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Împrospătez versiunile..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versiuni actualizate!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalare completa!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nu pot monta aparatul"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nu pot monta device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nu pot sterge folder din fostul LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Veți instala Tails pe %(size)s %(vendor)s %(model)s device (%(device)s). Toate datele pe deviceurile alese vor fi pierdute. Continui?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nu pot șterge fișier din fostul LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Veți actualiza Tails pe %(parent_size)s %(vendor)s %(model)s device (%(device)s). Orice volum persistent pe acest device va rămîne neschimbat. Continui?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Descărcare completă!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Descărcare eșuată!"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Puteți să reîncercați să reporniți downloadul"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nu pot reseta MBR. Poate nu aveți pachetul `syslinux` instalat."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Fișierul ales nu poate fi citit. Corectați accesul sau alegeți altul."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nu pot folosi fișierul ales. Puteți avea mai mult noroc mutînd ISO în folderul rădăcină (ex. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nu pot scrie pe %(device)s, ignor."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO necunoscut, trec de verificarea checksum"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "dbus exception necunoscută cînd încercam să montez device: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s ales"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "filesystem necunoscut. Aparatul ar putea să aibă nevoie să fie reformatat."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Lansare necunoscută: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Demontez '%(udi)s' pe '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Demontez filesystems montat pe '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Device nesuportat '%(device)s', raportați un bug."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "filesystem nesuportat: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "filesystem nesuportat: %s\nFaceți backup și formatați cheia USB cu filesystem FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Actualizez proprietățile partiției de sistem %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Actualizare\nprin clonare"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instalez Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Actualizare\nde la ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Folosește sistem LIve ISO existent"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verific ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verific SHA1 checksum a imaginii LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verific SHA256 checksum a imaginii LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verific filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Atenție: Crearea unui nou overlay persistent va șterge cel existent."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Avertisment: Acest instrument trebuie să fie rulat ca administrator. Pentru a face acest lucru, dați clic dreapta pe pictogramă și deschideți Proprietăți. Sub fila Compatibilitate, bifați căsuța \"Rulați acest program ca administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Scriu la %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Veți instala Tails pe %(size)s %(vendor)s %(model)s device (%(device)s). Toate datele pe deviceurile alese vor fi pierdute. Continui?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Veți actualiza Tails pe %(parent_size)s %(vendor)s %(model)s device (%(device)s). Orice volum persistent pe acest device va rămîne neschimbat. Continui?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Folosiți o versiune veche de syslinux-extlinux care nu suportă ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Puteți să reîncercați să reporniți downloadul"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Trebuie să rulați aplicația ca root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "sau"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ru/ru.po b/ru/ru.po
index fa8f88d..38aede0 100644
--- a/ru/ru.po
+++ b/ru/ru.po
@@ -14,20 +14,21 @@
# jujjer <jujjer at gmail.com>, 2013
# Misha Dyachuk <Wikia at scryptmail.com>, 2016
# Oul Gocke <beandonlybe at yandex.ru>, 2013-2014
-# Sergey Briskin <sergey.briskin at gmail.com>, 2014
+# Roberto Brigante, 2017
+# Sergey Briskin, 2014
# tavarysh <tavarysh at riseup.net>, 2013
# Vladimir.Serykh <Vladimir.Serykh at extenza-studio.ru>, 2015
# vlasok <vlasok1987 at yandex.ru>, 2012
# Yulia <ypoyarko at redhat.com>, 2009
-# Андрей Костриков <yavinav at gmail.com>, 2016
+# Uho Lot <yavinav at gmail.com>, 2016
# pistenrammler <inactive+pistenrammler at transifex.com>, 2015
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-12-30 00:13+0000\n"
-"Last-Translator: Misha Dyachuk <Wikia at scryptmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-05 14:31+0000\n"
+"Last-Translator: Roberto Brigante\n"
"Language-Team: Russian (http://www.transifex.com/otf/torproject/language/ru/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -35,591 +36,551 @@ msgstr ""
"Language: ru\n"
"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Клонирование и установка\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Нужно запускать это приложение из-под root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Установка с ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Извлечение живого образа на целевое устройство..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Установщик %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Записано на скорости %(speed)d МБ/сек"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "Выбрано %(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Настройка загрузочного файла OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Ошибка выполнения команды: `%(command)s`.⏎\nПодробный журнал ошибок сохранён в '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Проверка SHA1 LiveCD образа..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s уже является загрузочным"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Проверка SHA256 LiveCD образа..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Нужна помощь? Прочитайте <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">документацию</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Установите Tails на другой USB флэш накопитель путём копирования текущей ОС Tails.</li>\n\n<li>Все данные на USB накопителе будут - отформатированы</li>\n\n<li>Текущее зашифрованное хранилище на USB накопителе с ОС Tails не копируется.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Обновите версию Tails на другой флешке до используемой в данные момент версии Tails.</li>\n\n<li>Зашифрованное постоянное хранилище обновляемой флешки с Tails будет сохранено.</li>\n\n<li>Зашифрованное постоянное хранилище используемой сейчас флешки с Tails не копируется.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Обновить другую флешку Tails до верисии ISO образа.</li>\n\n<li>Зашифрованное постоянное хранилище обновляемой Флешки Tails сохранено.</li>\n\n<li>Зашифрованное постоянное хранилище ныне используемой Флешки Tails не скопировано.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Просмотр"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Путём выделения дополнительного места на флешке для постоянного хранилища вы получите возможность сохранять данные и делать постоянные модификации вашей текущей ОС. Без этого у вас не получится сохранять данные так, чтобы они оставались доступными после перезагрузки."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Вычисление SHA1 от %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Ошибка: Неверное SHA1 вашего Live CD образа. Вы можете запустить программу с аргументом --noverify, чтобы пропустить проверку."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Невозможно найти"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Неизвестный ISO, проверка контрольной суммы пропущена"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Устройство %s не найдено"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Недостаточно места на устройстве.\n%dMB ISO + %dMB постоянное хранилище > %dMB свободного места"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Создание %sМБ постоянного хранилища"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Устройство пока не примонтировано, поэтому нельзя определить количество свободного места."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Загрузка %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Загрузка завершена!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Невозможно копировать %(infile)s в %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Ошибка загрузки: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Удаление существующей Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Загрузка %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Этот диск является петлевым устройством, пропускаем сброс MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Невозможно chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Открытие непримонтированного устройства для '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Ошибка зондирования устройства"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Ошибка: Не удалось установить метку или получить UUID вашего устройства. Невозможно продолжить."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Ошибка: Неверное SHA1 вашего Live CD образа. Вы можете запустить программу с аргументом --noverify, чтобы пропустить проверку."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Извлечение живого образа на целевое устройство..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Невозможно удалить файл из предыдущей LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Форматирование %(device)s в FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Проверка контрольной суммы MD5 ISO-файла пройдена"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Невозможно удалить директорию из предыдущей LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Проверка контрольной суммы MD5 ISO-файла не пройдена"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Устройство %s не найдено"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Если вы не выберете существующий Live ISO, выбранные релиз будет загружен для вас."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Невозможно записать на %(device)s, пропускаю."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Установить\nклонированием"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Некоторые разделы целевого устройства %(device)s примонтированы. Они будут отмонтированы перед началом установки."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Установить Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Неизвестная файловая система. Ваше устройство нуждается в переформатировании."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Установка завершена!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Неподдерживаемая файловая система: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Установка завершена! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Установка была завершена. Нажмите OK чтобы закрыть программу."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Невозможно смонтировать устройство %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Установка загрузчика..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Нет точек монтирования"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Невозможно обновить %(pretty_name)s потому что оно не было создано с помощью Tails Installer. Вам нужно использовать %(action)s для обновления на этом устройстве."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Ошибка создания LiveUSB!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Открытие непримонтированного устройства для '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Обязательно распакуйте zip-файл liveusb-creator целиком перед запуском этой программы"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Размонтирование файловых систем на '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Убедитесь, что USB-устройство подключено и отформатировано (FAT)"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Размонтирование '%(udi)s' на '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Точка монтирования %s существует во время монтирования"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Отсутствует свободное пространство на устройстве %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Разметка устройства %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Нет точек монтирования"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Обновление свойств системного раздела %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Недостаточно места на устройстве.\n%dMB ISO + %dMB постоянное хранилище > %dMB свободного места"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Неподдерживаемое устройство '%(device)s', пожалуйста, сообщите об ошибке."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Раздел FAT16: Размер оверлея возможен не более 2ГБ"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Попытка продолжить всё равно."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Раздел отформатирован в FAT32; Размер постоянного хранилища ограничен 4 ГБ"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Проверка файловой системы..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Разметка устройства %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Невозможно изменить метку тома: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Постоянное хранилище"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Установка загрузчика..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Постоянное хранилище (0 Мб)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Пожалуйста, подтвердите выбор устройства"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Removing %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Обновление списка выпусков..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s уже является загрузочным"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Список релизов обновлён!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Невозможно найти раздел"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Removing %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Форматирование %(device)s в FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Удаление существующей Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Не удается найти syslinux' gptmbr.bin"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Сброс главной загрузочной записи %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Выберите Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Настройка загрузочного файла OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Этот диск является петлевым устройством, пропускаем сброс MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Некоторые разделы целевого устройства %(device)s примонтированы. Они будут отмонтированы перед началом установки."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Тип источника не поддерживает проверку контрольных сумм MD5 для ISO, пропускаем"
+msgid "Calculating the SHA1 of %s"
+msgstr "Вычисление SHA1 от %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Сихронизирую данные на диске..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Целевое устройство"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Ошибка зондирования устройства"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Устройство \"%(pretty_name)s\" слишком мало для установки (нужно как минимум %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Невозможно найти поддерживаемое устройство"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Выбранный файл нечитабелен. Исправьте файл или выберите другой."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Убедитесь, что USB-устройство подключено и отформатировано (FAT)"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Ошибка выполнения команды: `%(command)s`.⏎\nПодробный журнал ошибок сохранён в '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Неподдерживаемая файловая система: %s\nПожалуйста, сделайте резервную копию данных и отформатируйте USB-устройство в файловую систему FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Кнопка просмотра существующего ISO файла живой системы, который Вы скачали до этого. Если Вы его не выберите, то релиз будет скачан автоматически."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Невозможно получить Win32_LogicalDisk; win32com ничего не вернул"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Кнопка запуска создания LiveUSB. Это может привести к скачиванию релиза (если не выбран один из имеющихся), распаковке ISO на USB-устройство, созданию постоянного хранилища и установке загрузчика."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Невозможно найти"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Это USB-накопитель на который вы собираетесь установить Live-систему. Устройство должно быть отформатировано в FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Неизвестный выпуск: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Загрузка %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Это прогресс-бар, который показывает как долго остается до завершения установки LiveUSB."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Ошибка: Не удалось установить метку или получить UUID вашего устройства. Невозможно продолжить."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Это консоль состояния, куда пишутся все сообщения."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Установка завершена! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Попытка продолжить всё равно."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Внимание: Для работы требуются права Администратора. Что бы получить их, нажмите правой клавишей на иконку приложения и откройте Свойства. В вкладке Совместимость, поставьте галочку на \"Выполнять эту программу от имени администратора\"."
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Найден USB-диск"
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Невозможно изменить метку тома: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Невозможно chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Невозможно копировать %(infile)s в %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Невозможно найти ни одного USB накопителя"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Устройство \"%(pretty_name)s\" слишком мало для установки (нужно как минимум %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Невозможно найти поддерживаемое устройство"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Невозможно найти раздел"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Установка с ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Невозможно получить Win32_LogicalDisk; win32com ничего не вернул"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Невозможно обновить %(pretty_name)s потому что оно не было создано с помощью Tails Installer. Вам нужно использовать %(action)s для обновления на этом устройстве."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Обновление списка выпусков..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Список релизов обновлён!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Установка завершена!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Невозможно смонтировать устройство"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Невозможно смонтировать устройство %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Пожалуйста, подтвердите выбор устройства"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Невозможно удалить директорию из предыдущей LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Вы собираетесь установить Tails на устройство %(size)s %(vendor)s %(model)s (%(device)s). Все данные будут потеряны. Продолжить?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Невозможно удалить файл из предыдущей LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Вы собираетесь обновить Tails на устройстве %(parent_size)s %(vendor)s %(model)s (%(device)s). Постоянное хранилище на этом томе останется без изменений. Продолжить?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Загрузка завершена!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Ошибка загрузки: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Вы можете попробовать продолжить загрузку"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Невозможно сбросить MBR. Возможно, у Вас не установлен пакет `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Выбранный файл нечитабелен. Исправьте файл или выберите другой."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Невозможно использовать указанный файл. Попробуйте переместить ISO в корень диска (например C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Невозможно записать на %(device)s, пропускаю."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Неизвестный ISO, проверка контрольной суммы пропущена"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Неизвестное исключение dbus во время монтирования устройства: %(message)s"
+msgid "%(filename)s selected"
+msgstr "Выбрано %(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Неизвестная файловая система. Ваше устройство нуждается в переформатировании."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Неизвестный выпуск: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Размонтирование '%(udi)s' на '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Размонтирование файловых систем на '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Неподдерживаемое устройство '%(device)s', пожалуйста, сообщите об ошибке."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Неподдерживаемая файловая система: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Неподдерживаемая файловая система: %s\nПожалуйста, сделайте резервную копию данных и отформатируйте USB-устройство в файловую систему FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Обновление свойств системного раздела %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Обновить\nклонированием"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Установить Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Обновить\nс ISO-образа"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Использовать существующий Live ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Проверка контрольной суммы MD5 ISO-файла"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Проверка SHA1 LiveCD образа..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Проверка SHA256 LiveCD образа..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Проверка файловой системы..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Внимание: Создание нового постоянного слоя удалит существующий слой."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Внимание: Для работы требуются права Администратора. Что бы получить их, нажмите правой клавишей на иконку приложения и откройте Свойства. В вкладке Совместимость, поставьте галочку на \"Выполнять эту программу от имени администратора\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Записано на скорости %(speed)d МБ/сек"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Вы собираетесь установить Tails на устройство %(size)s %(vendor)s %(model)s (%(device)s). Все данные будут потеряны. Продолжить?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Вы собираетесь обновить Tails на устройстве %(parent_size)s %(vendor)s %(model)s (%(device)s). Постоянное хранилище на этом томе останется без изменений. Продолжить?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Вы используете старую версию syslinux-extlinux, которая не поддерживает ext4 файловую систему"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Вы можете попробовать продолжить загрузку"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Нужно запускать это приложение из-под root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "или"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ru at petr1708/ru at petr1708.po b/ru at petr1708/ru at petr1708.po
index b5ddc63..8b6e265 100644
--- a/ru at petr1708/ru at petr1708.po
+++ b/ru at petr1708/ru at petr1708.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Russian Petrine orthography (http://www.transifex.com/otf/torproject/language/ru@petr1708/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ru at petr1708\n"
"Plural-Forms: nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/scn/scn.po b/scn/scn.po
index fea753f..9c9cc9c 100644
--- a/scn/scn.po
+++ b/scn/scn.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Sicilian (http://www.transifex.com/otf/torproject/language/scn/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: scn\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/sco/sco.po b/sco/sco.po
index c37fb04..e91d97b 100644
--- a/sco/sco.po
+++ b/sco/sco.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Scots (http://www.transifex.com/otf/torproject/language/sco/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: sco\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/si_LK/si_LK.po b/si_LK/si_LK.po
index 5b0cb07..d41d3df 100644
--- a/si_LK/si_LK.po
+++ b/si_LK/si_LK.po
@@ -9,8 +9,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Sinhala (Sri Lanka) (http://www.transifex.com/otf/torproject/language/si_LK/)\n"
"MIME-Version: 1.0\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: si_LK\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "මුලය ලෙස මෙම යෙදීම ඔබ ක්රියාත්මක කල යුතුය "
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr ""
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "උපාංගයට ලියන ලදී%(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s තෝරාගන්නා ලදී "
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC boot ගොනුව සකසමින්..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr ""
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "පහත විධානය ක්රියාත්මක කිරීමේදී දෝෂයක් මතුවිය: `%(command)s`.\nසවිස්තරාත්මක දෝෂ ලොගය ලියවන ලදී'%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr ""
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "තහවුරු කරමින් SHA1 checksum හි LiveCD image..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%sදැනටමත් bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "තහවුරු කරමින් SHA256 checksum of LiveCD image..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "දෝෂය: ඔබගේ Live CD හි SHA1 වැරදිය. ඔබට මෙය --noverify සමග ක්රියාත්මක කිරීමෙන් තහවුරු කිරීමේ පරීක්ෂණය මග හැර යා හැක."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "නොදන්නා ISO, checksum තහවුරු කිරීම මග හරිමින් "
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "ස්ථාවර overlay%sMB එක තනමින් "
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "පිරික්සන්න"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "පිටපත් කිරීමට නොහැක %(infile)s to %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "අනවරත උඩතිරිය සදහා USB ආම්පන්නයේ වැඩි ඉඩක් වෙන්කිරීමෙන්, ඔබට දත්ත රැස්කර දීර්ඝකාලීන වෙනස්කම් ඔබගේ සජීවී මෙහෙයුම් පද්ධතියට කිරීමට හැකි වනු ඇත. එය නොමැතිව, ඔබට නැවත ඇරභීමකදී අනවරත කිරීමට දත්ත සුරැකීමට නොහැකි වූ ඇත."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "දැනට පවතින Live OS ඉවත් කරමින් "
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s හි SHA1ගණනය කරමින්"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod නොහැක %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "සොයාගත නොහැක "
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "පෙර LiveOS එකෙන් ගොනු ඉවත් කිරීමට නොහැක: %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "පෙර LiveOS එකෙන් නාමාවලි ඉවත් කිරීමට නොහැක: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "උපාංගය සොයාගත නොහැක%s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "ස්ථාවර overlay%sMB එක තනමින් "
+msgid "Unable to write on %(device)s, skipping."
+msgstr "ලිවීමට නොහැක %(device)s, මගහරිමින්."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "භාගත කරන්න %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "හදුනානොගත් ගොනු පද්ධතිය. ඔබගේ ආම්පන්නය නැවත සැකසීමට අවශ්ය වනු ඇත."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "භාගත කිරීම සාර්ථකයි!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "ආධාරක නොවෙන ගොනු පද්ධති: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "භාගත කිරීම අසාර්ථකයි!"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "භාගත වෙමින්%s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "උපකරණය මවුන්ට් කිරීමට නොහැක : %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "ධාවකය ලුපයකි, MBR reset මගහරිමින් "
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Mount points කිසිවක් හමුවී නොමැත"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "ආම්පන්න එෂණයේ දෝෂයක්"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "දෝෂය: ලේබලය සැකසීමට හෝ ඔබගේ උපකරණයේ UUID ලබාගැනීමට නොහැක. ඉදිරියට පවත්වා ගැනීමට නොහැක ."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "දෝෂය: ඔබගේ Live CD හි SHA1 වැරදිය. ඔබට මෙය --noverify සමග ක්රියාත්මක කිරීමෙන් තහවුරු කිරීමේ පරීක්ෂණය මග හැර යා හැක."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "සකසමින් %(device)s as FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum සාර්ථකයි "
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "මවුන්ට් කිරීම %s ප්රතිමවුන්ට් කිරීමෙන් පසුවද පවතී"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum තහවුරු කිරීම අසාර්ථකයි "
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "ඔබ පවත්නා Live ISO එකක් තොරනොගන්නේනම්, තෝරාගත් පිටවුම ඔබට බාගත කර දෙනු ඇත."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "ස්ථාපනය සම්පුර්ණය!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "ගොනු පද්ධතිය තහවුරු කරමින්"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "ස්ථාපනය කිරීම සම්පුරණයි! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "ස්ථාපනය සම්පුර්ණ විය. ok තදකර වැඩසටහන නිමකරන්න."
+msgid "Unable to change volume label: %(message)s"
+msgstr "දිගහැරුමේ ලේබලය වෙනස් කිරීමට නොහැක: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Bootloader ස්ථාපනය කරමින්..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB තැනීම අසාර්ථකයි!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "මුළු liveusb-creator zip ගොනුව උදෘත කිරීම ක්රමලේඛ්ය විචල්ය කිරීමට ප්රථම කිරීමට වග බලාගන්න."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB යතුර සම්බන්ධ කර FAT ගොනු පද්ධතිය සමග සැකසු බවට තහවුරු කරන්න"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "මවුන්ට් කිරීම %s ප්රතිමවුන්ට් කිරීමෙන් පසුවද පවතී"
+msgid "Removing %(file)s"
+msgstr "ඉවත්කරමින් %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "උපකරණයේ කිසිදු නිදහස් අවකාශයක් නොමැත %(device)s"
+msgid "%s already bootable"
+msgstr "%sදැනටමත් bootable"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Mount points කිසිවක් හමුවී නොමැත"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "බෙදුම් පත සොයාගත නොහැක "
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "FAT16 කොටස වේ; 2G දක්වා වැසීම සීමා කරමින් "
+msgid "Formatting %(device)s as FAT32"
+msgstr "සකසමින් %(device)s as FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "නොනැසී පවතින සංචිතය "
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "අනවර්ත ගබඩාව (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr ""
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "දිගහැරුම් නැවත ප්රාණවත් කරමින්..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "දිගහැරුම් යාවත්කාලීන කර ඇත !"
-
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "ඉවත්කරමින් %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "දැනට පවතින Live OS ඉවත් කරමින් "
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Master Boot Record නැවත සකසමින් %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Live ISO එක තෝරන්න "
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC boot ගොනුව සකසමින්..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "ධාවකය ලුපයකි, MBR reset මගහරිමින් "
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "ISO MD5 checksum තහවුරු කිරීමට මූලාශ්ර වර්ගය ආධාර නොවේ, මගහරිමින් "
+msgid "Calculating the SHA1 of %s"
+msgstr "%s හි SHA1ගණනය කරමින්"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "තැටියේ දත්ත සමමුහුර්ත කරමින්..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "ඉලක්කගත උපකරණය "
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "ආම්පන්න එෂණයේ දෝෂයක්"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "තෝරාගත් ගොනුව කියවිය නොහැක. කරුණාකර එහි අවසර සකස් කර හෝ වෙනත් ගොනුවක් තෝරාගන්න."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB යතුර සම්බන්ධ කර FAT ගොනු පද්ධතිය සමග සැකසු බවට තහවුරු කරන්න"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "පහත විධානය ක්රියාත්මක කිරීමේදී දෝෂයක් මතුවිය: `%(command)s`.\nසවිස්තරාත්මක දෝෂ ලොගය ලියවන ලදී'%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "ආධාර නොකරන ගොනු පද්ධතිය: %s\nකරුණාකර ඔබගේ USB යතුර FAT ගොනු පද්ධතිය සමග රක්ෂණය කර සකසන්න ."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "කාලීනව පවතින හෝ ඔබ කලින් බාගත කරගත් Live system ISO එකක් සෙවීමට මෙම බොත්තම ඉඩ දෙනු ඇත. පබා එකක තොරනගත්තේනම්, පිටවුමක් ඔබ වෙනුවෙන් ස්වයංක්රීයව බාගත කර දෙනු ඇත."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "ගැනීමට නොහැකි වුයේ Win32_LogicalDisk; win32com විමසුම ප්රථිපල කිසිවක් නැවත ප්රවේශ කලේ නැත"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "මෙම බොත්තම LiveUSB creation ක්රියාවලිය අරබනු ඇත. මෙහි ප්රවෙනිගතව අමතරව පිටවුමක් (පවතින එකක තොරනොගෙන ඇතිනම්), ISO USB ආම්පන්නයට උදෘත කිරීම, අනවරත උඩතිරියක් නිර්මාණය කිරීම, සහ බුට්ලෝඩර් ස්ථාපනය කිරීම අන්තර්ගතයි."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "සොයාගත නොහැක "
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "මේ ඇත්තේ ඔබට ඔබගේ Live system හි ස්ථාපනය කිරීමට අවශ්ය USB ආම්පන්නයයි. මෙම ආම්පන්නය FAT ගොනු පද්ධතිය සමග සැකසිය යුතුය."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "නොදන්නා දිගහැරුම: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "භාගත වෙමින්%s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "මේ ඇත්තේ LiveUSB creation ක්රියාවලියේ ඔබ කොතෙක් දුර ඇවිත් ඇත්දැයි පෙන්වන ප්රගති බාරයයි."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "දෝෂය: ලේබලය සැකසීමට හෝ ඔබගේ උපකරණයේ UUID ලබාගැනීමට නොහැක. ඉදිරියට පවත්වා ගැනීමට නොහැක ."
+
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "ස්ථාපනය කිරීම සම්පුරණයි! (%s)"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "මේ සෑම පණිවිඩයක්ම ලියවෙන තත්ත්වය පෙන්වන කොන්සොලයයි."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "අවවාදය: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "දිගහැරුමේ ලේබලය වෙනස් කිරීමට නොහැක: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod නොහැක %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "පිටපත් කිරීමට නොහැක %(infile)s to %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "USB ධාවකය සොයාගත නොහැක "
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "බෙදුම් පත සොයාගත නොහැක "
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "ගැනීමට නොහැකි වුයේ Win32_LogicalDisk; win32com විමසුම ප්රථිපල කිසිවක් නැවත ප්රවේශ කලේ නැත"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "දිගහැරුම් නැවත ප්රාණවත් කරමින්..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "දිගහැරුම් යාවත්කාලීන කර ඇත !"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "ස්ථාපනය සම්පුර්ණය!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "උපකරණය මවුන්ට් කිරීමට නොහැක "
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "උපකරණය මවුන්ට් කිරීමට නොහැක : %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "පෙර LiveOS එකෙන් නාමාවලි ඉවත් කිරීමට නොහැක: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "පෙර LiveOS එකෙන් ගොනු ඉවත් කිරීමට නොහැක: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "භාගත කිරීම සාර්ථකයි!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "භාගත කිරීම අසාර්ථකයි!"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "නැවතත් ඔබගේ බාගත කිරීම ආරම්භ කිරීමට ඔබට උත්සාහ කල හැකිය "
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR නැවත සැකසීමට නොහැක. ඔබට`sysලිනක්ස්` පැකේජය ස්ථාපනය වී නැති වීමට හැක."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "තෝරාගත් ගොනුව කියවිය නොහැක. කරුණාකර එහි අවසර සකස් කර හෝ වෙනත් ගොනුවක් තෝරාගන්න."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "තෝරාගත් ගොනුව භාවිතා කිරීමට නොහැක. ඔබේ ISO එක ධාවකයේ මූලය වෙත යැවීම වඩාත් සුදුසුය.(ie: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "ලිවීමට නොහැක %(device)s, මගහරිමින්."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "නොදන්නා ISO, checksum තහවුරු කිරීම මග හරිමින් "
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "උපකරණය මවුන්ට් කිරීමට තැත් කිරීමේදී නොදන්නා dbus exception එකක් ඇති විය: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s තෝරාගන්නා ලදී "
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "හදුනානොගත් ගොනු පද්ධතිය. ඔබගේ ආම්පන්නය නැවත සැකසීමට අවශ්ය වනු ඇත."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "නොදන්නා දිගහැරුම: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "ආධාරක නොවෙන ගොනු පද්ධති: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "ආධාර නොකරන ගොනු පද්ධතිය: %s\nකරුණාකර ඔබගේ USB යතුර FAT ගොනු පද්ධතිය සමග රක්ෂණය කර සකසන්න ."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "දැනට පවතින Live system ISO එක භාවිතා කරන්න"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 checksum තහවුරු කරමින්"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "තහවුරු කරමින් SHA1 checksum හි LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "තහවුරු කරමින් SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "ගොනු පද්ධතිය තහවුරු කරමින්"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "අවවාදය: නව ස්ථාවර overlay එකක් නිර්මාණය තුලින් ඔබගේ දැනට පවතින දෑ මකා දමයි."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "අවවාදය: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "උපාංගයට ලියන ලදී%(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "syslinux-extlinux වල පරණ සංස්කරණයක් ඔබ භාවිත කරන අතර ext4 ගොනු පද්ධතියට එය ආධාර නොවේ."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "නැවතත් ඔබගේ බාගත කිරීම ආරම්භ කිරීමට ඔබට උත්සාහ කල හැකිය "
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "මුලය ලෙස මෙම යෙදීම ඔබ ක්රියාත්මක කල යුතුය "
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "හෝ"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sk/sk.po b/sk/sk.po
index fb36caf..6c66808 100644
--- a/sk/sk.po
+++ b/sk/sk.po
@@ -15,8 +15,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Slovak (http://www.transifex.com/otf/torproject/language/sk/)\n"
"MIME-Version: 1.0\n"
@@ -25,591 +25,551 @@ msgstr ""
"Language: sk\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Túto aplikáciu musíte spúšťať ako root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr ""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extrahuje sa live obraz na cieľové zariadenie..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s inštalátor"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Zapísané na zariadenie rýchlosťou %(speed)d Mb/s"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s vybraný"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Nastavuje sa zavádzací súbor OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Nastal problém s vykonaním nasledujúceho príkazu: `%(command)s`.\nPodrobnosti o tejto chybe boli zapísané do súboru '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Overovanie kontrolného súčtu SHA1 obrazu LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s je už bootovateľné."
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Overovanie kontrolného súčtu SHA256 obrazu LiveCD..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Chyba: SHA1 kontrolný súčet Live CD je neplatný. Na preskočenie tejto kontroly, spustite program s parametrom --noverify."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Neznáme ISO, preskakuje sa overenie kontrolného súčtu"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Nedostatok miesta na zariadení.\n%dMB ISO + %dMB trvalé úložisko > %dMB volného miesta"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Vytváram %sMB trvalé úložisko"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Prehliadať"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nedá sa kopírovať %(infile)s do %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Alokovaním dodatočného miesta na vašom USB kľúči pre trvalé úložisko budete schopní ukladať dáta a robiť pernamentné úpravy vášho live operačného systému. Bez toho nebude možné uložiť dáta, ktoré by sa zachovali aj po reboote."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Odoberám existujúci Live OS"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Počítam SHA1 %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nedá sa zmeniť oprávnenie %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nepodarilo sa nájsť"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nedá sa odobrať súbor z predošlého LiveOS: %(message)s"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nedá sa odobrať adresár z predošlého LiveOS: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Nie je možné nájsť zariadenie %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Vytváram %sMB trvalé úložisko"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nedá sa zapísať na %(device)s, preskakujem."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Zariadenie zatiaľ nie je pripojené, takže nemôžeme určiť množstvo voľného miesta."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Sú pripojené niektoré partície cieľového zariadenia %(device)s. Pred začatím inštalácie budú odpojené."
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Stiahnuť %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Neznámy súborový systém. Vaše zariadenie bude potrebné preformátovať."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Sťahovanie dokončené!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodporovaný súborový systém: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Sťahovanie zlyhalo: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "Sťahujem %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Nedá sa pripojiť zariadenie: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Zariadenie je slučka, preskakujem resetovanie hlavného bootovacieho záznamu"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Neboli nájdené žiadne body pripojenia"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "Vkladá sa unmount_device pre zariadenie %(device)s'"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Chyba pri snímaní zariadenia"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Chyba: Nie je možné nastaviť menovka alebo získať UUID vašeho zariadenia. Nie je možné pokračovať."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Chyba: SHA1 kontrolný súčet Live CD je neplatný. Na preskočenie tejto kontroly, spustite program s parametrom --noverify."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extrahuje sa live obraz na cieľové zariadenie..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Odpájajú sa pripojené súborové systémy na zariadení '%(device)s'"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formátujem %(device)s ako FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Odpája sa '%(udi)s' na zariadení '%(device)s'"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Overovanie kontrolného súčtu ISO MD5 prebehlo"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "Pripojenie %s existuje po odpojení"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Overovanie kontrolného súčtu ISO MD5 zlyhalo"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "Rozdeľuje sa zariadenie %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ak si nezvolíte už existujúce Live ISO, bude vám stiahnuté vybraté vydanie."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aktualizácia vlastností systémovej partície %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepodporované zariadenie '%(device)s', prosíme nahláste túto chybu."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Nainštalovať Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Snažiť sa napriek tomu pokračovať."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Inštalácia dokončená!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Kontroluje sa súborový systém..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Inštalácia je dokončená! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Inštalácia bola dokončená. Stlačením OK zatvoríte tento program."
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nie je možné zmeniť menovku zväzku: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Inštaluje sa bootloader..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Vytvorenie LiveUSB zlyhalo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Uistite sa, že rozbalíte celý liveusb-creator súbor zip pred spustením tohto programu."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Skontrolujte, či je USB kľúč pripojený a naformátovaný na súborový systém FAT"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "Pripojenie %s existuje po odpojení"
+msgid "Removing %(file)s"
+msgstr "Odoberám %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Nedostatok miesta na zariadení %(device)s"
+msgid "%s already bootable"
+msgstr "%s je už bootovateľné."
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Neboli nájdené žiadne body pripojenia"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nedá sa nájsť partícia"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Nedostatok miesta na zariadení.\n%dMB ISO + %dMB trvalé úložisko > %dMB volného miesta"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partícia je FAT16; obmedzuje veľkosť na 2 GB"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formátujem %(device)s ako FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partícia je FAT32; Veľkosť úložiska sa obmedzuje na 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Rozdeľuje sa zariadenie %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trvalé úložisko"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Trvalé úložisko (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Prosíme potvrďte váš výber zariadenia"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Obnovujú sa vydania.."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Vydania aktualizované!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "Odoberám %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Odoberám existujúci Live OS"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetujem hlavný bootovací záznam %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Vyberte Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Nastavuje sa zavádzací súbor OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Zariadenie je slučka, preskakujem resetovanie hlavného bootovacieho záznamu"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Sú pripojené niektoré partície cieľového zariadenia %(device)s. Pred začatím inštalácie budú odpojené."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Typ zdroja nepodporuje overenie ISO MD5 pomocou kontrolného súčtu, preskakujem"
+msgid "Calculating the SHA1 of %s"
+msgstr "Počítam SHA1 %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizujem údaje na disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Cieľové zariadenie"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Chyba pri snímaní zariadenia"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nenašlo sa žiadne podporované zariadenie"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Zvolený súbor je nečitateľný. Prosíme opravte jeho oprávnenia alebo si zvoľte iný súbor."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Skontrolujte, či je USB kľúč pripojený a naformátovaný na súborový systém FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Nastal problém s vykonaním nasledujúceho príkazu: `%(command)s`.\nPodrobnosti o tejto chybe boli zapísané do súboru '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodporovaný súborový systém: %s\nSpravte zálohu a naformátujte USB kľúč na súborový systém FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Toto tlačidlo vám umožňuje vyhľadať existujúce ISO Live systému, ktoré ste si predtým stiahli. Ak si nezvolíte žiadne, automaticky vám bude stiahnuté príslušné vydanie."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nedá sa získať Win32_LogicalDisk; win32com neodpovedá na požiadavku"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Toto tlačidlo odštartuje proces vytvárania LiveUSB. Zahŕňa to prípadné stiahnutie vydania (ak nebolo zvolené žiadne existujúce), extrahovanie ISO súboru na USB zariadenie, vytvorenie trvalého úložiska a inštaláciu zavádzača."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nepodarilo sa nájsť"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Toto je USB kľúč, na ktorom chcete nainštalovať váš Live systém. Zariadenie musí byť naformátované so súborovým systémom FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Neznáme vydanie: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Sťahujem %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Táto lišta bude indikovať, ako ďaleko sa momentálne nachádzate v procese vytvárania LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Chyba: Nie je možné nastaviť menovka alebo získať UUID vašeho zariadenia. Nie je možné pokračovať."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Toto je stavová konzola, do ktorej budú vypisované všetky správy."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Inštalácia je dokončená! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Snažiť sa napriek tomu pokračovať."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB klúč nájdený"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Upozornenie: Tento nástroj je potrebné spustiť ako Administrátor. Učiníte tak tým, že kliknete pravým tlačidlom na ikonu a vyberiete Vlastnosti. Pod záložkou Kompatibilita označte políčko \"Spustiť tento program ako administrátor\"."
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
+
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nie je možné zmeniť menovku zväzku: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nedá sa zmeniť oprávnenie %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nedá sa kopírovať %(infile)s do %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nepodarilo sa nájsť žiadne USB zariadenie"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nenašlo sa žiadne podporované zariadenie"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nedá sa nájsť partícia"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nedá sa získať Win32_LogicalDisk; win32com neodpovedá na požiadavku"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Obnovujú sa vydania.."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Vydania aktualizované!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Inštalácia dokončená!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nie je možné pripojiť zariadenie"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nedá sa pripojiť zariadenie: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Prosíme potvrďte váš výber zariadenia"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nedá sa odobrať adresár z predošlého LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Idete inštalovať Tails na %(size)s %(vendor)s %(model)s zariadení (%(device)s). Všetky dáta na vybranom zariadení budú stratené. Pokračovať?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nedá sa odobrať súbor z predošlého LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Idete aktualizovať Tails na %(parent_size)s %(vendor)s %(model)s zariadení (%(device)s). Všetka trvalá kapacita na tomto zariadení bude zachovaná. Pokračovať?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Sťahovanie dokončené!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Sťahovanie zlyhalo: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Môžete skúsiť znovu spustiť sťahovanie"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nedá sa resetovať hlavný bootovací záznam. Možno nemáte nainštalovaný balík `syslinux`"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Zvolený súbor je nečitateľný. Prosíme opravte jeho oprávnenia alebo si zvoľte iný súbor."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nedá sa použiť vybraný súbor. Skúste presunúť ISO do Vášho koreňového adresára (napr. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nedá sa zapísať na %(device)s, preskakujem."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Neznáme ISO, preskakuje sa overenie kontrolného súčtu"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Neznám dbus výnimka pri pokuse pripojiť zariadenie: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s vybraný"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Neznámy súborový systém. Vaše zariadenie bude potrebné preformátovať."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Neznáme vydanie: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Odpája sa '%(udi)s' na zariadení '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Odpájajú sa pripojené súborové systémy na zariadení '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepodporované zariadenie '%(device)s', prosíme nahláste túto chybu."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodporovaný súborový systém: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodporovaný súborový systém: %s\nSpravte zálohu a naformátujte USB kľúč na súborový systém FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Aktualizácia vlastností systémovej partície %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Nainštalovať Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Použiť už existujúce Live systém ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Overuje sa kontrolný súčet ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Overovanie kontrolného súčtu SHA1 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Overovanie kontrolného súčtu SHA256 obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Kontroluje sa súborový systém..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Upozornenie: Vytvorením nového trvalého úložiska sa vymaže to už existujúce."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Upozornenie: Tento nástroj je potrebné spustiť ako Administrátor. Učiníte tak tým, že kliknete pravým tlačidlom na ikonu a vyberiete Vlastnosti. Pod záložkou Kompatibilita označte políčko \"Spustiť tento program ako administrátor\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Zapísané na zariadenie rýchlosťou %(speed)d Mb/s"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Idete inštalovať Tails na %(size)s %(vendor)s %(model)s zariadení (%(device)s). Všetky dáta na vybranom zariadení budú stratené. Pokračovať?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Idete aktualizovať Tails na %(parent_size)s %(vendor)s %(model)s zariadení (%(device)s). Všetka trvalá kapacita na tomto zariadení bude zachovaná. Pokračovať?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Používate starú verziu syslinux-extlinux, ktorá nepodporuje súborový systém ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Môžete skúsiť znovu spustiť sťahovanie"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Túto aplikáciu musíte spúšťať ako root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "alebo"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sk_SK/sk_SK.po b/sk_SK/sk_SK.po
index 59f72a9..2b657cc 100644
--- a/sk_SK/sk_SK.po
+++ b/sk_SK/sk_SK.po
@@ -3,16 +3,16 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# Dasa M <littlearchr8 at gmail.com>, 2016
-# Marián Mižik <marian at mizik.sk>, 2015
+# Daša Matúšová, 2016
+# Marián Mižik <inactive+marian.mizik at transifex.com>, 2015
# once, 2014
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-07-08 20:21+0000\n"
-"Last-Translator: Dasa M <littlearchr8 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Slovak (Slovakia) (http://www.transifex.com/otf/torproject/language/sk_SK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -20,591 +20,551 @@ msgstr ""
"Language: sk_SK\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klonovať & inštalovať\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Túto aplikáciu je potrebné spustiť ako administrátor"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Inštalovať z ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Rozbaľujem live obraz do cieľového zariadenia..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Inštalátor"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Zapísané na zariadenie rýchlosťou %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s označených"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Nastavujem štartovací súbor OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Pri vykonávaní nasledovného príkazu: `%(command)s` nastala chyba.\nPodrobnosti o tejto chybe boli zapísané do súboru '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Overujem SHA1 checksum obrazu LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s je bootovateľné"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Overujem SHA256 checksum obrazu LiveCD..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n\np, li { white-space: pre-wrap; }\n\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Potrebujete pomoc? Prečítajte si <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentácia</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Pre inštaláciu Tails na iný USB kľúč skopírujte systém Tail, ktorý práve teraz používate</li>\n\n<li>USB kľúč, na ktorý inštalujete bude sformátovaný a všetky dáta budú stratené.</li>\n\n<li>Šifrovaný oddiel na USB kľúči, ktorý teraz používate, nebude skopírovaný.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Aktualizovať iný Tails na USB kľúči na na verziu, ktorú teraz používate.</li>\n\n<li>Šifrovaný stály oddiel na USB kľúči s obsahom Tails ostáva aj po aktualizácii nezmenený.</li>\n\n<li>Šifrovaný stály oddiel na USB kľúči s obsahom Tails nebude po aktualizácii skopírovaný.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Aktualizovať iný USB kľúč so systémom Tails na verziu ISO obrazu.</li>\n\n<li>Šifrovaný stály oddiel na USB kľúči s obsahom Tails ostáva aj po aktualizácii nezmenený.</li>\n\n<li>Šifrovaný stály oddiel na USB kľúči s obsahom Tails nebude po aktualizácii skopírovaný.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Prezerať"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Vyčlenením špeciálneho miesta pre stálu pamäť na Vašom USB kľúči budete schopný ukladať dáta a robiť trvalé zmeny v operačnom systéme. Bez toho nebudete mať možnosť ukladať dáta, ktoré ostanú aj po opätovnom spustení systému."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Prebieha výpočet SHA1 pre %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Chyba: SHA1 Vašeho Live CD je neplatné. Možete spustiť tento program s parametrom --noverify, aby ste túto kontrolu obišli."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Nie je možné nájsť"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Neznáme ISO, preskakujem checksum verifikáciu"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Nie je možné nájsť zariadenie %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Na zariadení nie je dostatok voľného miesta.\n%dMB ISO + %dMB pamäť > %dMB voľné miesto"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Vytvára sa %sMB trvalej pamäte"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Zariadenie ešte nebolo pripojené, takže nie je možné určiť veľkosť voľného miesta."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Sťahujem %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Preberanie kompletné!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nie je možné skopírovať %(infile)s do %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Preberanie zlyhalo:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Odstraňovanie existujúceho Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Preberanie %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Zariadenie je loopback, preskakujem MBR reset"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nie je možné zmeniť oprávnenie %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Spúšťa sa unmount_device pre '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Chyba pri skúšaní zariadenia"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Chyba: nie je možné nastaviť menovku alebo získať UUID Vašeho zariadenia. Nie je možné pokračovať."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Chyba: SHA1 Vašeho Live CD je neplatné. Možete spustiť tento program s parametrom --noverify, aby ste túto kontrolu obišli."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Rozbaľujem live obraz do cieľového zariadenia..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nemôžem ostrániť súbor z predchádzajúceho LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formátovanie %(device)s ako FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum prešiel"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nemôžem ostrániť priečinok z predchádzajúceho LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verifikácia ISO MD5 checksum zlyhala"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Nie je možné nájsť zariadenie %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Ak nezvolíte existujúce Live ISO, zvolená verzia bude stiahnutá automaticky."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nie je možné uskutočniť zápis na %(device)s, preskakujem."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Inštalácia\nklonovaním"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Niektoré oddiely, pripojené na cieľovom zariadení %(device)s sú pripojené. Pred začatím inštalačného procesu budú odpojené."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Inštalácia Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Neznámy súborový systém. Vaše zariadenie bude nutné opäť sformátovať."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Inštalácia kompletná!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodporovaný súborový systém: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Inštalácia kompletná! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Inštalácia prebehla úspešne. Pre zavretie programu stlačte OK."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Nemôžem pripojiť zariadenie: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Inštalujem bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Neboli nájdené žiadne body pripojenia"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Nie je možné aktualizovať zariadenie %(pretty_name)s, pretože nebolo vytvorené použitím inštalátora Tails. Použite %(action)s pre aktualizáciu Tials na tomto zariadení."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Vytvorenie Live USB zlyhalo!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Spúšťa sa unmount_device pre '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Uistite sa, že ste rozbalili celý súbor liveusb-creator zip predtým, než spustíte tento program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Odpája sa pripojený súborový systém '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Uistite sa, že Váš USB kľúč je pripojený a naformátovaný na systém FAT."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Odpája sa '%(udi)s' na '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Pripojenie %s existuje po odpojení"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Na zariadení %(device)s nie je voľné miesto"
+msgid "Partitioning device %(device)s"
+msgstr "Vytváranie oddielov na zariadení %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Neboli nájdené žiadne body pripojenia"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aktualizujem vlastnosti systémového oddielu %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Na zariadení nie je dostatok voľného miesta.\n%dMB ISO + %dMB pamäť > %dMB voľné miesto"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepodorované zariadenie '%(device)s', prosím nahláste chybu."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Oddiel je formátovaný na FAT16; veľkosť pamäte je obmedzená na 2 G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Pokušam sa napriek tomu pokračovať."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Oddiel je formátovaný na FAT32; veľkosť pamäte je obmedzená na 4 G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Overujem súborový systém..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Vytváranie oddielov na zariadení %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nie je možné zmeniť menovku %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trvalé úložisko"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Inštalujem bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Trvalé úložisko (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Prosím potvrďte výber Vašeho zariadenia"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Odstraňovanie %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Obnovovanie verzií..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s je bootovateľné"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Verzie obnovené!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Nie je možné nájsť oddiel"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Odstraňovanie %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formátovanie %(device)s ako FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Odstraňovanie existujúceho Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetujem hlavný bootovací záznam %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Vyberte Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Nastavujem štartovací súbor OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Zariadenie je loopback, preskakujem MBR reset"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Niektoré oddiely, pripojené na cieľovom zariadení %(device)s sú pripojené. Pred začatím inštalačného procesu budú odpojené."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Typ zdrojového súboru nepodporuje verifikáciu ISO MD5 checksum, preskakujem"
+msgid "Calculating the SHA1 of %s"
+msgstr "Prebieha výpočet SHA1 pre %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizujem dáta na disku..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Cieľové zariadenie"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Chyba pri skúšaní zariadenia"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Zariadenie \"%(pretty_name)s\" je príliš malé na inštaláciu Tails (je vyžadovaných minimálne %(size)s GB)"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Nemôžem nájsť žiadne podporované zariadenie"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Vybraný súbor je nečitaťeľný. Prosím upravte oprávnenia alebo vyberte iný súbor."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Uistite sa, že Váš USB kľúč je pripojený a naformátovaný na systém FAT."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Pri vykonávaní nasledovného príkazu: `%(command)s` nastala chyba.\nPodrobnosti o tejto chybe boli zapísané do súboru '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodporovaný súborový systém: %s\nProsím zálohujte a sformátujte Váš USB kľúč súborovým systémom FAT"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Toto tlačítko Vám umožní nájsť existujúci Live ISO, ktorý ste stiahli. Ak žiaden nevyberiete, bude stiahnutý automaticky."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nemôžem získať Win32_LogicalDisk; win32com nevrátil žiadne výsledky"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Toto tlačítko spustí proces vytvárania Live USB. To znamená prípadne stiahnutie (ak žiadna verzia nebola vybraná) a rozbalenie ISO obrazu na USB kľúč, vytvorenie trvalej pamäte a inštalácia zavádzača."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Nie je možné nájsť"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Toto je USB kľúč, na ktorý chcete inštalovať Váš Live systém. Toto zariadenie musí byť naformátované systémom FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Neznáma verzia: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Preberanie %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Toto je ukazovateľ postupu, ktorý ukazuje postup vytvárania LiveUSB."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Chyba: nie je možné nastaviť menovku alebo získať UUID Vašeho zariadenia. Nie je možné pokračovať."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Toto je informačná konzola, ktorá vypisuje všetky správy."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Inštalácia kompletná! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Pokušam sa napriek tomu pokračovať."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB disk nájdený"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Varovanie: Tento nástroj je nutné spustiť ako Administrátor. Kliknite pravým tlačidlom na ikonu a otvorte Vlastnosti. Pod záložkou kompatibilita zaškrtnite položku \"Program spustiť ako administrátor\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nie je možné zmeniť menovku %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nie je možné zmeniť oprávnenie %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nie je možné skopírovať %(infile)s do %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nemôžem nájsť žiadny USB disk"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Zariadenie \"%(pretty_name)s\" je príliš malé na inštaláciu Tails (je vyžadovaných minimálne %(size)s GB)"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Nemôžem nájsť žiadne podporované zariadenie"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Nie je možné nájsť oddiel"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Inštalovať z ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nemôžem získať Win32_LogicalDisk; win32com nevrátil žiadne výsledky"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Nie je možné aktualizovať zariadenie %(pretty_name)s, pretože nebolo vytvorené použitím inštalátora Tails. Použite %(action)s pre aktualizáciu Tials na tomto zariadení."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Obnovovanie verzií..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Verzie obnovené!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Inštalácia kompletná!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nemôžem pripojiť zariadenie"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nemôžem pripojiť zariadenie: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Prosím potvrďte výber Vašeho zariadenia"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nemôžem ostrániť priečinok z predchádzajúceho LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Chystáte sa inštalovať Tails na %(size)s %(vendor)s %(model)s zariadenie (%(device)s). Všetky dáta na vybranom zariadení budú zmazané. Pokračovať?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nemôžem ostrániť súbor z predchádzajúceho LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Chystáte sa aktualizovať Tail na %(parent_size)s %(vendor)s %(model)s zariadení (%(device)s). Všetky trvalé odiely na zariadení ostanú nezmenené. Pokračovať?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Preberanie kompletné!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Preberanie zlyhalo:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Môžete sa pokúsiť o pokračovanie sťahovania"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nemôžem resetovať MBR. Je možné, že nemáte nainštalovaný balík `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Vybraný súbor je nečitaťeľný. Prosím upravte oprávnenia alebo vyberte iný súbor."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nie je možné použiť zvolený súbor. Možno pomôže, ak presuniete Váš ISO súbor do koreňového disku (napr. C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nie je možné uskutočniť zápis na %(device)s, preskakujem."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Neznáme ISO, preskakujem checksum verifikáciu"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Neznáma výnimka dbus pri snahe o pripojenie zariadenia: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s označených"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Neznámy súborový systém. Vaše zariadenie bude nutné opäť sformátovať."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Neznáma verzia: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Odpája sa '%(udi)s' na '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Odpája sa pripojený súborový systém '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepodorované zariadenie '%(device)s', prosím nahláste chybu."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodporovaný súborový systém: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodporovaný súborový systém: %s\nProsím zálohujte a sformátujte Váš USB kľúč súborovým systémom FAT"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Aktualizujem vlastnosti systémového oddielu %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Aktualizujem\nklonovaním"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Inštalácia Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Aktualizujem\nz ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Použiť existujúci Live ISO systém"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Overiť ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Overujem SHA1 checksum obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Overujem SHA256 checksum obrazu LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Overujem súborový systém..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Varovanie: Vytvorenie nového trvalého úložiska vymaže existujúci."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Varovanie: Tento nástroj je nutné spustiť ako Administrátor. Kliknite pravým tlačidlom na ikonu a otvorte Vlastnosti. Pod záložkou kompatibilita zaškrtnite položku \"Program spustiť ako administrátor\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Zapísané na zariadenie rýchlosťou %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Chystáte sa inštalovať Tails na %(size)s %(vendor)s %(model)s zariadenie (%(device)s). Všetky dáta na vybranom zariadení budú zmazané. Pokračovať?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Chystáte sa aktualizovať Tail na %(parent_size)s %(vendor)s %(model)s zariadení (%(device)s). Všetky trvalé odiely na zariadení ostanú nezmenené. Pokračovať?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Používate zastaralú verziu syslinux-extlinux, ktorá nepodporuje súborový systém ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Môžete sa pokúsiť o pokračovanie sťahovania"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Túto aplikáciu je potrebné spustiť ako administrátor"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "alebo"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sl/sl.po b/sl/sl.po
index 1806e20..9d8bd54 100644
--- a/sl/sl.po
+++ b/sl/sl.po
@@ -3,13 +3,13 @@
# This file is distributed under the same license as the PACKAGE package.
#
# Translators:
-# RokX <rokxer at gmail.com>, 2014
+# RokX, 2014
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Slovenian (http://www.transifex.com/otf/torproject/language/sl/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: sl\n"
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Brskaj"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Cannot find device %s"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:513
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:692
#, python-format
-msgid "Download %(distribution)s"
+msgid ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Downloading %s..."
-msgstr "Pobiram %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Namestitev končana!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Namestitev končana! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Namestitev zaključena! Pritisni OK za zaprtje programa."
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Ustvarjanje LiveUSB spodletelo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr ""
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Na napravi %(device)s ni dovolj prostora "
+msgid "%s already bootable"
+msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Particija je FAT16; Največja datoteka je lahko velika 2GB"
-
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr ""
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Stalna shramba"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "Neznana izdaja: %s"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Pobiram %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgid "Installation complete! (%s)"
+msgstr "Namestitev končana! (%s)"
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
+
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Ne najdem USB naprave"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Namestitev končana!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Naprave ni mogoče namestiti"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr ""
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Neznana izdaja: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ali"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sl_SI/sl_SI.po b/sl_SI/sl_SI.po
index 0f12c21..d4edb5f 100644
--- a/sl_SI/sl_SI.po
+++ b/sl_SI/sl_SI.po
@@ -11,8 +11,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Slovenian (Slovenia) (http://www.transifex.com/otf/torproject/language/sl_SI/)\n"
"MIME-Version: 1.0\n"
@@ -21,591 +21,551 @@ msgstr ""
"Language: sl_SI\n"
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Kloniraj & Namesti\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "To aplikacijo morate zagnati kot root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Namesti iz ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Izpisovanje tekoče slike na ciljno napravo..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Namestitev"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Zapisano na napravo s %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s izbrana"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Nastavitev OLPC zagonske datoteke..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Nastal je problem pri izvrševanju ukaza: `%(command)s`.\nZa prikaz podrobnosti je bila ustvarjena log datoteka v '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Preverjanje SHA1 kontrolne vsote na LiveCD sliki..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s že zagonska"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Preverjanje SHA256 kontrolne vsote na LiveCD sliki..."
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Napaka: SHA1 vašega CD-ja je neveljavna. Lahko zaženete ta program z --noverify argumentom,ki zaobide preverjanje verifikacije."
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nepoznan ISO, preskočim preverjanje"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Ni dovolj prostora na napravi.\n%dMB ISO + %dMB drugega > %dMB prostega"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Ustvarjanje %s nenehnega prikrivanja"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Brskanje"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Nemogoče kopirati %(infile)s v %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Z dodelitvijo dodatnega prostora na vašem USB ključu za nenehno prikrivanje, boste lahko shranjevali podatke in trajne spremembe vašega OS. Brez njega ne boste mogli shraniti podatkov za nadaljevanje pri ponovnem zagonu računalnika."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Odstranitev obstoječe žive distribucije OS"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Preračunavanje SHA1 od %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Nemogoče v chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ne najdem"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Nemogoče odstraniti datoteke predhodnje LiveOS: %(message)s"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Nemogoče odstraniti imenik predhodne LiveOS: %(message)s"
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Ne najdem naprave %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Ustvarjanje %s nenehnega prikrivanja"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Nemogoče zapisovanje na %(device)s, preskočim."
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Naprava še ni priklopljena zato ne moremo določiti količino prostega."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Nekatere particije na ciljni napravi %(device)s so vpete. Potrebno jih je odpeti pred začetkom namestitve. "
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Prenesi %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Nepoznan datotečni sistem. Naprava mora biti formatirana."
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Prenos končan!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodprt datotečni sistem: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Neuspel prenos:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "Prenašanje %s"
+msgid "Unable to mount device: %(message)s"
+msgstr "Nemogoče priklopiti napravo: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Pogon je v povratni zanki, preskoči reset MBR"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Ne najdem priklopne točke"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "Vnašanje odklopljene_naprave za '%(device)s'"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Napaka sondirane naprave"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Napaka: Ne morem nastaviti etiketo ali pridobiti UUID naprave. Nemogoče nadaljevanje."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Napaka: SHA1 vašega CD-ja je neveljavna. Lahko zaženete ta program z --noverify argumentom,ki zaobide preverjanje verifikacije."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Izpisovanje tekoče slike na ciljno napravo..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Odklapljanje priklopljenega datotečnega sistema na '%(device)s'"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatiranje %(device)s kot FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Odklapljanje '%(udi)s' na '%(device)s'"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 preverjanje opravljeno"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "Priklop %s obstaja po odklopu"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 preverjanje neuspešno "
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "Delitev naprave %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Če ne boste izbrali obstoječe Live ISO, bo za vas sneta izbrana izdaja."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Posodabljanje lastnosti sistemske particije %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Nepodprta naprava '%(device)s', prosim javite hrošča."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Namesti Sledi"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Poskušam vseeno nadaljevati."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Namestitev končana!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Preverjanje datotečnega sistema"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Namestitev končana! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Namestitev končana. Pritisnite VREDU za zapiranje programa"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Nemogoče spremeniti nalepko nosilca: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "Namestitev zaganjalnika ..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Ni možno nadgraditi naprave %(pretty_name)s ker ni bila ustvarjena z uporabo Tails Installer. Namesto tega poskusite uporabiti %(action)s da nadgradite Tails na tej napravi."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Kreiranje LiveUSB ni uspelo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Prepričajte se, da je izluščena celotna liveusb-creator zip datoteko, preden poženete ta program."
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Prepričajte se, da je USB vtaknjen in formatiran z FAT sistemsko datoteko"
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "Priklop %s obstaja po odklopu"
+msgid "Removing %(file)s"
+msgstr "Odstranjevanje %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Na napravi ni prostora %(device)s"
+msgid "%s already bootable"
+msgstr "%s že zagonska"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Ne najdem priklopne točke"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Ne najde particije"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Ni dovolj prostora na napravi.\n%dMB ISO + %dMB drugega > %dMB prostega"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Particija je FAT 16; Omejevanje na velikodt 2G"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatiranje %(device)s kot FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Particija je FAT 32; Omejevanje na velikost 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Delitev naprave %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trajno shranjevanje"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Trajno shranjevanje (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Prosim, potrdite izbiro naprave"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Osveževanje izdaje..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Izdaje posodobljene!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "Odstranjevanje %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Odstranitev obstoječe žive distribucije OS"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Ponastavitev MBR %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Izberite živo distribucijo ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Nastavitev OLPC zagonske datoteke..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Pogon je v povratni zanki, preskoči reset MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Nekatere particije na ciljni napravi %(device)s so vpete. Potrebno jih je odpeti pred začetkom namestitve. "
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tip izvora ne podpira kontrole ISO MD5, preskoči"
+msgid "Calculating the SHA1 of %s"
+msgstr "Preračunavanje SHA1 od %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Sinhronizacija podatkov na disk"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Ciljna naprava"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Napaka sondirane naprave"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Naprava \"%(pretty_name)s\" vsebuje premalo prostora za namestitev Tails (najmanj %(size)s GB je priporočeno)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Ne najde nobene podprte naprave"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Izbrana datoteka je nečitljiva. Popravite dovoljenje ali izberite drugo datoteko."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Prepričajte se, da je USB vtaknjen in formatiran z FAT sistemsko datoteko"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Nastal je problem pri izvrševanju ukaza: `%(command)s`.\nZa prikaz podrobnosti je bila ustvarjena log datoteka v '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodprt datotečni sistem: %s\nProsim formatirajte USB z FAT datotečnim sistemom."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ta gumb vam omogoča brskanje za obstoječimi živimi sistemi ISO, ki ste jih že prenesli. Če ne boste izbrali katerega, bo izdaja prenesena samodejno."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Nemogoče dobiti Win32_LogicalDisk; win32com poizvedba ni vrnila nobenih rezultatov"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ta gumb prične s procesom ustvarjanja LiveUSB. To bo sprožilo prenašanje izdaje (če obstoječa ni bila izbrana ), razpakiranje ISO na USB ključek, ustvarilo trajno prikrivanje in namestilo zaganjalnik."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ne najdem"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "To je USB ključek na katerega želite namestiti živ sistem. Naprava mora biti formatirana z FAT datotečnim sistemom."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nepoznana izdaja: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Prenašanje %s"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "To je vrstica napredka, ki kaže kako daleč ste v procesu ustvarjanja LiveUSB "
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Napaka: Ne morem nastaviti etiketo ali pridobiti UUID naprave. Nemogoče nadaljevanje."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "To je konzola stanja, kjer se zapisujejo vsa sporočila."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Namestitev končana! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Poskušam vseeno nadaljevati."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB naprava ni bila najdena"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Opozorilo: To orodje mora biti zagnano kot Administrator. Da to naredite, kliknite desno na ikono in odprite lastnosti. V tab-u združljivost označite \" Zaženi kot Administrator\"."
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
+
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Nemogoče spremeniti nalepko nosilca: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Nemogoče v chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Nemogoče kopirati %(infile)s v %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Ne najde nobenega USB pogona"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Naprava \"%(pretty_name)s\" vsebuje premalo prostora za namestitev Tails (najmanj %(size)s GB je priporočeno)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Ne najde nobene podprte naprave"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Ne najde particije"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Namesti iz ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Nemogoče dobiti Win32_LogicalDisk; win32com poizvedba ni vrnila nobenih rezultatov"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Ni možno nadgraditi naprave %(pretty_name)s ker ni bila ustvarjena z uporabo Tails Installer. Namesto tega poskusite uporabiti %(action)s da nadgradite Tails na tej napravi."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Osveževanje izdaje..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Izdaje posodobljene!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Namestitev končana!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nemogoče priklopiti napravo"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Nemogoče priklopiti napravo: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Prosim, potrdite izbiro naprave"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Nemogoče odstraniti imenik predhodne LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Namestili boste Sledi na %(size)s %(vendor)s %(model)s napravo (%(device)s). Vsi podatki na izbrani napravi bodo izgubljeni. Nadaljujem?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Nemogoče odstraniti datoteke predhodnje LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Nadgradili boste Sledi na %(parent_size)s %(vendor)s %(model)s napravi (%(device)s). Noben trajni nosilec na tej napravi ne bo spremenjen. Nadaljujem?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Prenos končan!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Neuspel prenos:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Ponovno poskusite nadaljevati vaš prenos"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Nemogoče ponastaviti MBR. Nimate nameščenega paketa `syslinux`"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Izbrana datoteka je nečitljiva. Popravite dovoljenje ali izberite drugo datoteko."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nemogoče uporabiti izbrano datoteko. Več sreče boste imeli s premikom vaše ISO v koren pogona (npr.: C:\\ )"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Nemogoče zapisovanje na %(device)s, preskočim."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nepoznan ISO, preskočim preverjanje"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Nepoznana dbus izjema pri priklapljanju naprave: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s izbrana"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Nepoznan datotečni sistem. Naprava mora biti formatirana."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nepoznana izdaja: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Odklapljanje '%(udi)s' na '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Odklapljanje priklopljenega datotečnega sistema na '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Nepodprta naprava '%(device)s', prosim javite hrošča."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodprt datotečni sistem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodprt datotečni sistem: %s\nProsim formatirajte USB z FAT datotečnim sistemom."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Posodabljanje lastnosti sistemske particije %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Namesti Sledi"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Uporabite obstoječ živ sistem ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Preverjanje ISO MD5 "
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Preverjanje SHA1 kontrolne vsote na LiveCD sliki..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Preverjanje SHA256 kontrolne vsote na LiveCD sliki..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Preverjanje datotečnega sistema"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Opozorilo: Ustvarjanje novega prikrivanja bo izbrisalo obstoječega."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Opozorilo: To orodje mora biti zagnano kot Administrator. Da to naredite, kliknite desno na ikono in odprite lastnosti. V tab-u združljivost označite \" Zaženi kot Administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Zapisano na napravo s %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Namestili boste Sledi na %(size)s %(vendor)s %(model)s napravo (%(device)s). Vsi podatki na izbrani napravi bodo izgubljeni. Nadaljujem?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Nadgradili boste Sledi na %(parent_size)s %(vendor)s %(model)s napravi (%(device)s). Noben trajni nosilec na tej napravi ne bo spremenjen. Nadaljujem?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Uporabljate staro verzijo syslinux-extlinux, ki ne podpira ext4 datotečnega sistema"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Ponovno poskusite nadaljevati vaš prenos"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "To aplikacijo morate zagnati kot root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ali"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sn/sn.po b/sn/sn.po
index 25f4339..cf93392 100644
--- a/sn/sn.po
+++ b/sn/sn.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Shona (http://www.transifex.com/otf/torproject/language/sn/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: sn\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/so/so.po b/so/so.po
index b09835a..e9457cf 100644
--- a/so/so.po
+++ b/so/so.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Somali (http://www.transifex.com/otf/torproject/language/so/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: so\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/son/son.po b/son/son.po
index 8a73c05..d437d98 100644
--- a/son/son.po
+++ b/son/son.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Songhay (http://www.transifex.com/otf/torproject/language/son/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: son\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/sq/sq.po b/sq/sq.po
index 5d0b9fd..a2d08ab 100644
--- a/sq/sq.po
+++ b/sq/sq.po
@@ -9,9 +9,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-22 16:19+0000\n"
-"Last-Translator: Bujar Tafili\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Albanian (http://www.transifex.com/otf/torproject/language/sq/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: sq\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klononi & Instaloni\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Duhet ta ekzekutoni këtë program si rrënjë"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instaloni nga ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Nxjerrja e imazhit të drejtpërdrejtë në pajisjen synuar..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "Instaluesi i %(distribution)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Shkroi në pajisje me shpejtësi %(speed)d MB/sek"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s e përzgjedhur"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Duke konfiguruar skedarin e nisjes për OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "U has një problem gjatë ekzekutimit të komandës vijuese: `%(command)s`.\nNjë regjistër gabimi më i hollësishëm është shkruar tek '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Duke verifikuar shumën e saktë të shifrave SHA1 të imazhit të LiveCD"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s plotësisht funksional"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Duke verifikuar shumën e saktë të shifrave SHA256 të imazhit të LiveCD"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Ju duhet ndihmë? Lexoni<a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentacionin</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Instaloni Tails në një tjetër disk USB, duke kopjuar sistemin Tails që po përdorni këtë çast.</li>\n\n<li>Disku USB që ju po instaloni është i formatuar dhe të gjitha të dhënat janë zhdukur.</li>\n\n<li>Kujtesa e përhershme e shifruar e diskut USB të Tails që po përdorni këtë çast nuk është kopjuar.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Përmirësoni një tjetër disk USB të Tails, me të njëjtin version të Tails që po përdorni këtë çast.</li>\n\n<li>Kujtesa e përhershme e shifruar e diskut USB të Tails që ju përmirësuat është ruajtur.</li>\n\n<li>Kujtesa e përhershme e shifruar e diskut USB të Tails që po përdorni këtë çast nuk është kopjuar.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Përmirësoni një tjetër disk USB të Tails, me versionin e një imazhi ISO.</li>\n\n<li>Kujtesa e përhershme e shifruar e diskut USB të Tails që ju përmirësuat është ruajtur.</li>\n\n<li>Kujtesa e përhershme e shifruar e diskut USB të Tails që po përdorni këtë çast nuk është kopjuar.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Lundroni"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Duke vendosur hapësirë ekstra në diskun tuaj USB, për një mbivendosje të vazhdueshme, ju do të jeni në gjendje të vendosni të dhëna dhe të bëni modifikime të përhershme drejtpërdrejt tek sistemi juaj operativ. Pa të, nuk do mundni t'i ruani të dhënat që mbeten pas një rinisje. "
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Duke përllogaritur SHA1 të %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Gabim: SHA1 e Live CD-së tuaj është e pavlefshme. Ju mund ta ekzekutoni këtë program me --argumentin \"mos verifikoni\", për të shmangur kontrollin e verifikimit."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "S'mund të gjendet"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO e panjohur, duke kapërcyer verifikimin e shumës së saktë të shifrave"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "S'mund të gjendet pajisja %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "S'ka hapësirë të mjaftueshme në pajisje.\n%dMB ISO + mbivendosja %dMB > hapësira e lirë %dMB"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Duke krijuar mbulim të vazhdueshëm të %sMB "
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Pajisja ende s'është montuar, kësisoj ne s'mund ta përcaktojmë sasinë e hapësirës së lirë"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Shkarkoni %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Shkarkimi u krye!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "S'mund të kopjohet %(infile)s tek %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Shkarkimi dështoi:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Largimi i Live OS-së ekzistuese"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Duke shkarkuar %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Pajisja është riciklike, duke shmangur rivendosjen e MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "S'mund të përdoret regjimi i ndryshimit të komandës %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Duke futur çmontoni_pajisjen për '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Pajisje për sondimin e gabimit"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Gabim: S'mund të vendoset etiketa ose të përftohet UUID-i i pajisjes tuaj. I pamundur vazhdimi."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Gabim: SHA1 e Live CD-së tuaj është e pavlefshme. Ju mund ta ekzekutoni këtë program me --argumentin \"mos verifikoni\", për të shmangur kontrollin e verifikimit."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Nxjerrja e imazhit të drejtpërdrejtë në pajisjen synuar..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "S'mund të hiqet skedari nga LiveOS i mëparshëm: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Duke e formatuar %(device)s si FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Verifikimi i shumës së saktë të shifrave për ISO MD5 u krye"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "S'mund të hiqet direktoria nga LiveOS i mëparshëm: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verifikimi i shumës së saktë të shifrave për ISO MD5 dështoi"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "S'mund të gjendet pajisja %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Nëse nuk përzgjidhni një Live ISO ekzistuese, versioni i zgjedhur do të shkarkohet për ju."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "S'mund të shkruhet tek %(device)s, duke e kapërcyer."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Instaloni\npërmes klonimit"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Disa njësi të ndara të pajisjes së synuar %(device)s janë montuar. Ato do të çmontohen përpara se të nisë procesi i instalimit."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Instaloni Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Sistem i panjohur skedarësh. Pajisja juaj mund të ketë nevojë për riformatim."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalimi u krye!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Sistem skedarësh i pa mbështetur: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalimi u krye! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalimi u krye. Shtypeni OK për ta mbyllur këtë program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "S'mund të montohet pajisja: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Duke instaluar nisësin..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "S'u gjet asnjë pikë montimi"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Është e pamundur të përmirësoni pajisjen %(pretty_name)s pasi ajo nuk është krijuar duke përdorur Instaluesin e Tails. Përkundër, ju duhet të përdorni %(action)s për të përmirësuar Tails në këtë pajisje."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Krijimi i LiveUSB dështoi!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Duke futur çmontoni_pajisjen për '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Sigurohuni që ta nxirrni të gjithë skedarin zip krijues-liveusb, para se ta ekzekutoni këtë program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Çmontimi i sistemit të skedarëve të montuar në '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Sigurohuni që USB-ja juaj të jetë e ngulur dhe e formatuar me sistemin e skedarëve FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Çmontimi i '%(udi)s' në '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Montimi i %s është i pranishëm pas çmontimit"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "S'ka hapësirë të zbrazët në pajisjen %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Pajisja ndarëse %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "S'u gjet asnjë pikë montimi"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Përditësimi i vetive të ndarjes së sistemit %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "S'ka hapësirë të mjaftueshme në pajisje.\n%dMB ISO + mbivendosja %dMB > hapësira e lirë %dMB"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Pajisje '%(device)s' e pamontuar. Ju lutemi raportoni një gabim."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Njësia e ndarë është FAT16; Kufizimi në 2G, për madhësisë së mbivendosjes "
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Duke u rrekur për të vazhduar gjithsesi."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Njësia e ndarë është FAT32; Kufizojeni madhësinë e mbivendosjes në 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Duke verifikuar sistemin e skedarëve..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Pajisja ndarëse %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "S'mund të ndryshohet etiketa e volumit: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Magazinimi i Vazhdueshëm"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Duke instaluar nisësin..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Magazinimi i Vazhdueshëm (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Ju lutemi konfirmoni përzgjedhjen e pajisjes tuaj"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Largimi i %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Duke rifreskuar versionet..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s plotësisht funksional"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Versionet u përditësuan!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "S'mund të gjendet njësia e ndarjë"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Largimi i %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Duke e formatuar %(device)s si FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Largimi i Live OS-së ekzistuese"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Rivendosja e Regjistrit të Nisjes Kryesore për %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Përzgjidhni Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Duke konfiguruar skedarin e nisjes për OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Pajisja është riciklike, duke shmangur rivendosjen e MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Disa njësi të ndara të pajisjes së synuar %(device)s janë montuar. Ato do të çmontohen përpara se të nisë procesi i instalimit."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Tipi burimor nuk e ofron Verifikimi i shumës së saktë të shifrave për ISO MD5, duke e shmangur"
+msgid "Calculating the SHA1 of %s"
+msgstr "Duke përllogaritur SHA1 të %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Duke sinkronizuar të dhënat në disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Pajisja e Synuar"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Pajisje për sondimin e gabimit"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Pajisja \"%(pretty_name)s\" është shumë e vogël për të instaluar Tails (duhen të paktën %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "S'mund të gjendet asnjë pajisje e pranuar"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Skedari i përzgjedhur është i palexueshëm. Ju lutemi ndreqini lejet e tij, ose përzgjidhni një skedar tjetër."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Sigurohuni që USB-ja juaj të jetë e ngulur dhe e formatuar me sistemin e skedarëve FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "U has një problem gjatë ekzekutimit të komandës vijuese: `%(command)s`.\nNjë regjistër gabimi më i hollësishëm është shkruar tek '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Sistem skedarësh i papranueshëm: %s\nJu lutemi ruajeni dhe formatoni diskun tuaj USB, me sistemin e skedarëve FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Ky buton ju lejon të shfletoni për një sistem ekzistues Live ISO, që e keni shkarkuar më parë. Nëse nuk e përzgjidhni një, për ju do të shkarkohet një version automatikisht."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "S'mund të merret Win32_LogicalDisk; pyetje win32com nuk ktheu asnjë rezultat"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Ky buton do të nisë procesin e krijimit të LiveUSB. Kjo përfshin shkarkimin sipas dëshirës së një versioni (nëse një ekzistues nuk është përzgjedhur), nxjerrjen e ISO-s në pajisjen USB, krijimin e një mbivendosje të vazhdueshme, si dhe instalimin e nisësit."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "S'mund të gjendet"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Ky është disku USB ku ju dëshironi të instaloni sistemin tuaj Live. Kjo pajisje duhet të formatohet me sistemin e skedarëve FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Version i panjohur: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Duke shkarkuar %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Ky është shiriti i përparimit, që do të tregojë sesa larg keni shkuar me procesin e krijimit të LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Gabim: S'mund të vendoset etiketa ose të përftohet UUID-i i pajisjes tuaj. I pamundur vazhdimi."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ky është paneli i gjendjes, ku shkruhen të gjitha mesazhet."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Instalimi u krye! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Duke u rrekur për të vazhduar gjithsesi."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "U gjet disk USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Kujdes: Ky mjet lypset të ekzekutohet si një Administrator. Për ta bërë këtë, klikoni me të djathtën mbi ikonë dhe hapni Vetitë. Tek butoni Përputhshmëria, shenjoni kutizën \"Ekzekutojeni këtë program si administrator\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "S'mund të ndryshohet etiketa e volumit: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "S'mund të përdoret regjimi i ndryshimit të komandës %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "S'mund të kopjohet %(infile)s tek %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "S'mund të gjendet asnjë disk USB"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Pajisja \"%(pretty_name)s\" është shumë e vogël për të instaluar Tails (duhen të paktën %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "S'mund të gjendet asnjë pajisje e pranuar"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "S'mund të gjendet njësia e ndarjë"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instaloni nga ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "S'mund të merret Win32_LogicalDisk; pyetje win32com nuk ktheu asnjë rezultat"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Është e pamundur të përmirësoni pajisjen %(pretty_name)s pasi ajo nuk është krijuar duke përdorur Instaluesin e Tails. Përkundër, ju duhet të përdorni %(action)s për të përmirësuar Tails në këtë pajisje."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Duke rifreskuar versionet..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Versionet u përditësuan!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalimi u krye!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "S'mund të montohet pajisja"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "S'mund të montohet pajisja: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Ju lutemi konfirmoni përzgjedhjen e pajisjes tuaj"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "S'mund të hiqet direktoria nga LiveOS i mëparshëm: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Ju do të instaloni Tails në pajisjen (%(device)s) %(size)s %(vendor)s %(model)s. Të gjitha të dhënat në pajisjen e përzgjedhur do të humbasin. Të vazhdojmë?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "S'mund të hiqet skedari nga LiveOS i mëparshëm: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Ju do të përmirësoni Tails në të pajisjes (%(device)s) %(parent_size)s %(vendor)s %(model)s. Çdo volum në këtë pajisje do të mbetet e pandryshuar. Të vazhdojmë?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Shkarkimi u krye!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Shkarkimi dështoi:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Mund të provoni sërish që ta rinisni shkarkimin tuaj."
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "S'mund të rivendoset MBR. Ndoshta nuk e keni të instaluar paketën 'syslinux'."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Skedari i përzgjedhur është i palexueshëm. Ju lutemi ndreqini lejet e tij, ose përzgjidhni një skedar tjetër."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "S'mund të përdoret skedari i përzgjedhur. Mund të jeni më me fat nëse e lëvizni ISO-n tuaj, tek rrënja e diskut tuaj (psh: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "S'mund të shkruhet tek %(device)s, duke e kapërcyer."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO e panjohur, duke kapërcyer verifikimin e shumës së saktë të shifrave"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Përjashtim i panjohur për dbus, gjatë montimit të pajisjes: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s e përzgjedhur"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Sistem i panjohur skedarësh. Pajisja juaj mund të ketë nevojë për riformatim."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Version i panjohur: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Çmontimi i '%(udi)s' në '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Çmontimi i sistemit të skedarëve të montuar në '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Pajisje '%(device)s' e pamontuar. Ju lutemi raportoni një gabim."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Sistem skedarësh i pa mbështetur: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Sistem skedarësh i papranueshëm: %s\nJu lutemi ruajeni dhe formatoni diskun tuaj USB, me sistemin e skedarëve FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Përditësimi i vetive të ndarjes së sistemit %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Përmirësoni\npërmes klonimit"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Instaloni Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Përmirësoni\nnga ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Përdorni sistemin Live ISO ekzistues"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifikimi i shumës së saktë të shifrave për ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Duke verifikuar shumën e saktë të shifrave SHA1 të imazhit të LiveCD"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Duke verifikuar shumën e saktë të shifrave SHA256 të imazhit të LiveCD"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Duke verifikuar sistemin e skedarëve..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Kujdes: Krijimi i një mbivendosje të re të qëndrueshme, do ta fshijë atë tuaj ekzistues."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Kujdes: Ky mjet lypset të ekzekutohet si një Administrator. Për ta bërë këtë, klikoni me të djathtën mbi ikonë dhe hapni Vetitë. Tek butoni Përputhshmëria, shenjoni kutizën \"Ekzekutojeni këtë program si administrator\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Shkroi në pajisje me shpejtësi %(speed)d MB/sek"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Ju do të instaloni Tails në pajisjen (%(device)s) %(size)s %(vendor)s %(model)s. Të gjitha të dhënat në pajisjen e përzgjedhur do të humbasin. Të vazhdojmë?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Ju do të përmirësoni Tails në të pajisjes (%(device)s) %(parent_size)s %(vendor)s %(model)s. Çdo volum në këtë pajisje do të mbetet e pandryshuar. Të vazhdojmë?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Po përdorni një version të vjetër të syslinux-extlinux, që nuk e pranon sistemin e skedarëve ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Mund të provoni sërish që ta rinisni shkarkimin tuaj."
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Duhet ta ekzekutoni këtë program si rrënjë"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ose"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sr/sr.po b/sr/sr.po
index 1227ab6..e02ac38 100644
--- a/sr/sr.po
+++ b/sr/sr.po
@@ -13,9 +13,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-26 09:06+0000\n"
-"Last-Translator: Alert Aleksandar\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Serbian (http://www.transifex.com/otf/torproject/language/sr/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -23,591 +23,551 @@ msgstr ""
"Language: sr\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Клонирај & Инсталирај\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Morate pokrenuti ovaj program kao 'root' nalog"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Инсталирај из ISO-а\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Инсталер"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Prebacio na uredjaj u %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s odabran."
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Postavljam OLPC pokretacku dadoteku"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s већ bootable"
-
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Greska: SHA1 vaseg Live CD je nevazeci . Mozete da pokrenete ovaj program sa --noverifi komandom da zaobidjete ovu proveru."
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nepoznat ISO, preskacem checksum verifikaciju"
+
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Pravim %sMB trajni sloj"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Прегледај"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ne mogu da nadjem"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Ne mogu da pronadjem uredjaj %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Pravim %sMB trajni sloj"
+msgid "Unable to write on %(device)s, skipping."
+msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "Preuzmi %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Preuzimanje zavrseno!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Filesystem nepodrzan: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Preuzmianje neuspelo!"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "Preuzmimam %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "Ne moguce pokrenuti uredjaj: %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Gresška: postavljanje oznake ili čitanje UUID vašeg uređaja neuspelo. Nije moguće nastaviti."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Greska: SHA1 vaseg Live CD je nevazeci . Mozete da pokrenete ovaj program sa --noverifi komandom da zaobidjete ovu proveru."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:799
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatiram %(device)s kao FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum prosla"
+msgid "Mount %s exists after unmounting"
+msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum verifikacija neuspela"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Instalacija zavrsena!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Filesystem verifikacija..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Instalacija zavrsena! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Instalacija je zavrsena. Kliknite OK da zatvorite program."
+msgid "Unable to change volume label: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Kreiranje LiveUSB-a nije uspelo!"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Brisem %(file)s"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s већ bootable"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pobrinite se da je vas USB uredjaj utaknut i formatiran sa FAT sistemom."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Ne moguce pronaci particiju."
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatiram %(device)s kao FAT32"
+
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Nema slobodnog prostora na uredjaju %(device)s"
-
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Particija je FAT16; Ogranicavanje velicine preklapanja na 2G"
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
+msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Трајно складиште"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr ""
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pobrinite se da je vas USB uredjaj utaknut i formatiran sa FAT sistemom."
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1356
#, python-format
-msgid "Removing %(file)s"
-msgstr "Brisem %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr ""
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Filesystem nepodrzan: %s\nNapravite rezervnu kopiju i formatirajte vas USB uredjaj sa FAT sistemom."
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Izaberite zivi ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Postavljam OLPC pokretacku dadoteku"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ne mogu da nadjem"
-#: ../liveusb/creator.py:742
-#, python-format
+#: ../tails_installer/creator.py:1477
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Vrsta izvora ne podrzava verifickaciju ISO MD5 checksum, preskacem"
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Nepoznato izdanjе %s"
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr ""
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Preuzmimam %s..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Ciljni uredjaj"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Gresška: postavljanje oznake ili čitanje UUID vašeg uređaja neuspelo. Nije moguće nastaviti."
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Installation complete! (%s)"
+msgstr "Instalacija zavrsena! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Upozorenje: Ovaj uredjaj mora biti pokrenut kao Administrator. Da uradite ovo, kliknite desnim klikom na ikonicu i izaberite Properties. Pod Compatability opcijom, odaberite \"Run this program as an administrator\" ."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/creator.py:354
-#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Ovo je statusna konzola, gde se sve poruke ispisuju."
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr ""
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Инсталирај из ISO-а\""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Nijedan USB uredjaj nije pronadjen."
-
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Ne moguce pronaci particiju."
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Instalacija zavrsena!"
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Nije moguce pokrenuti uredjaj."
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Ne moguce pokrenuti uredjaj: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Preuzimanje zavrseno!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Preuzmianje neuspelo!"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Mozete probati opet da nastavite vase preuzimanje."
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Ne mozete koriti izabran fajl. Mozda cete imati vise srece ako premestite vas ISO u glavni direktorijum vaseg uredjaja (npr. c:\\)."
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s odabran."
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nepoznat ISO, preskacem checksum verifikaciju"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nepoznato izdanjе %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Filesystem nepodrzan: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Filesystem nepodrzan: %s\nNapravite rezervnu kopiju i formatirajte vas USB uredjaj sa FAT sistemom."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Koristi postojeci Live sistem ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Proveravam ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Filesystem verifikacija..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Упозорење: прављењем новог трајног слоја ћете обрисати постојеће."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Upozorenje: Ovaj uredjaj mora biti pokrenut kao Administrator. Da uradite ovo, kliknite desnim klikom na ikonicu i izaberite Properties. Pod Compatability opcijom, odaberite \"Run this program as an administrator\" ."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Prebacio na uredjaj u %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Mozete probati opet da nastavite vase preuzimanje."
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Morate pokrenuti ovaj program kao 'root' nalog"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ili"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sr at latin/sr at latin.po b/sr at latin/sr at latin.po
index 80c5770..7feddd7 100644
--- a/sr at latin/sr at latin.po
+++ b/sr at latin/sr at latin.po
@@ -9,9 +9,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-05-08 13:42+0000\n"
-"Last-Translator: Miroljub Zivkovic <miroljubz at msn.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Serbian (Latin) (http://www.transifex.com/otf/torproject/language/sr@latin/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: sr at latin\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Kloniranje & Instalacija\""
-
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Instalacija iz ISO\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Morate pokrenuti ovaj program kroz „root“ nalog"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
-#, python-format
-msgid "%(distribution)s Installer"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/gui.py:804
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(filename)s selected"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:424
-#, python-format
-msgid "%(size)s %(label)s"
-msgstr ""
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Postavljam OLPC pokretačku datoteku..."
-#: ../liveusb/gui.py:430
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Greška: SHA1 suma živog CD diska je neispravna. Možete pokrenuti ovaj program sa --noverify argumentom kako biste zaobišli proveru."
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Nepoznati ISO, preskačem proveru kontrolne sume"
+
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "Pravim %sMB trajni sloj"
+
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
+#, python-format
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Ne mogu da nađem"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "Ne mogu da pronađem uređaj %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "Pravim %sMB trajni sloj"
-
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:692
#, python-format
-msgid "Download %(distribution)s"
+msgid ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Preuzimanje završeno!"
-
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Preuzimanje je neuspešno:"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Downloading %s..."
-msgstr "Preuzimam %s..."
+msgid "Unsupported filesystem: %s"
+msgstr "Nepodržan sistem datoteka: %s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Greška: ne mogu da postavim oznaku ili dobavim UUID uređaja. U nemogućnosti da nastavim dalje."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Greška: SHA1 suma živog CD diska je neispravna. Možete pokrenuti ovaj program sa --noverify argumentom kako biste zaobišli proveru."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:785
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:265
-#, python-format
-msgid "Installation complete! (%s)"
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Proveravam sistem datoteka..."
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Pravljenje živog USB sistema nije uspelo!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Pobrinite se da je USB ubačen i formatiran sa FAT sistemom datoteka"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Trajno skladište"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr ""
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Removing %(file)s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:1186
-#, python-format
-msgid "Resetting Master Boot Record of %s"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Izaberite živi ISO"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Postavljam OLPC pokretačku datoteku..."
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Pobrinite se da je USB ubačen i formatiran sa FAT sistemom datoteka"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Nepodržan sistem datoteka: %s\nNapravite rezervnu kopiju i potom formatirajte USB uređaj sa FAT sistemom datoteka."
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1423
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr ""
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Ne mogu da nađem"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:69
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "Nepoznato izdanje %s"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Preuzimam %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Greška: ne mogu da postavim oznaku ili dobavim UUID uređaja. U nemogućnosti da nastavim dalje."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:253
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Instalacija iz ISO\""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr ""
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Preuzimanje završeno!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Preuzimanje je neuspešno:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Možete pokušati opet da nastavite vaše preuzimanje"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Nepoznati ISO, preskačem proveru kontrolne sume"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "Nepoznato izdanje %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Nepodržan sistem datoteka: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Nepodržan sistem datoteka: %s\nNapravite rezervnu kopiju i potom formatirajte USB uređaj sa FAT sistemom datoteka."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Proveravam ISO MD5 kontrolnu sumu"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Proveravam sistem datoteka..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Upozorenje: pravljenjem novog trajnog sloja ćete obrisati postojeće."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Možete pokušati opet da nastavite vaše preuzimanje"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Morate pokrenuti ovaj program kroz „root“ nalog"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/st/st.po b/st/st.po
index 73fa04b..4b57585 100644
--- a/st/st.po
+++ b/st/st.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Sotho, Southern (http://www.transifex.com/otf/torproject/language/st/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: st\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/su/su.po b/su/su.po
index 55d999f..90d7c18 100644
--- a/su/su.po
+++ b/su/su.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Sundanese (http://www.transifex.com/otf/torproject/language/su/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: su\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/sv/sv.po b/sv/sv.po
index c3f5ebd..695c7ac 100644
--- a/sv/sv.po
+++ b/sv/sv.po
@@ -5,10 +5,10 @@
# Translators:
# Anders Nilsson <anders at devode.se>, 2015
# cryptohead <cryptohead at gmail.com>, 2013
-# Foorack <maxfaxalv at gmail.com>, 2015
+# Foorack, 2015
# Gabor Sebastiani, 2014
# Göran Uddeborg <goeran at uddeborg.se>, 2010
-# Jonatan Nyberg <jonatan at autistici.org>, 2017
+# Jonatan Nyberg, 2017
# Mikael Hiort af Ornäs <mikael.hafo at hotmail.com>, 2013
# Isis, 2014
# WinterFairy <winterfairy at riseup.net>, 2013-2014
@@ -16,9 +16,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-04-14 02:23+0000\n"
-"Last-Translator: Jonatan Nyberg <jonatan at autistici.org>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-06 06:21+0000\n"
+"Last-Translator: Jonatan Nyberg\n"
"Language-Team: Swedish (http://www.transifex.com/otf/torproject/language/sv/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -26,591 +26,551 @@ msgstr ""
"Language: sv\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Klona & installera\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Du måste köra det här programmet som root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Installera från ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Packar upp live-avbild till målenheten..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s installerare"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Skrev till enheten med %(speed)d MB/sek"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s valda"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Installerar OLPC startfil..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Ett problem inträffade när följande kommando kördes: `%(command)s`.\nEn mer detaljerad feljournal har skrivits till '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verifierar SHA1 kontrollsumma av LiveCD avbild..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s är redan startbar"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verifierar SHA256 kontrollsumma av LiveCD avbild..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Behöver du hjälp? Läs <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.sv.html\"><span style=\" text-decoration: underline; color:#0000ff;\">dokumentationen</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Installera Tails på en annan USB-sticka genom att kopiera Tails-systemet du använder för tillfället.</li>\n\n<li>USB-stickan du installerar på kommer formateras och alla tidigare data kommer gå förlorade.</li>\n\n<li>Den krypterade beständiga lagringen på Tails USB-stickan som du använder just nu kopieras inte.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppgradera en annan Tails USB-sticka till versionen du använder för tillfället.</li>\n\n<li>Den krypterade beständiga lagringen på Tails USB-stickan som du uppgraderar behålls.</li>\n\n<li>Den krypterade beständiga lagringen på Tails USB-stickan som du använder just nu kopieras inte.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Uppgradera en annan Tails USB-sticka till versionen från en ISO-avbild.</li>\n\n<li>Den krypterade beständiga lagringen på Tails USB-stickan som du uppgraderar behålls.</li>\n\n<li>Den krypterade beständiga lagringen på Tails USB-stickan som du använder just nu kopieras inte.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Bläddra"
-
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:341
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Genom att allokera extra utrymme på ditt USB-minne för beständig överlagring kan du möjliggöra lagring av data samt göra beständiga ändringar i ditt live operativsystem. Utan detta kommer ingen data du sparar att finnas kvar mellan omstarter."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Beräknar SHA1 för %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Fel: SHA1-summan för din Live CD är ogiltig. Du kan köra detta program med argumentet --noverify för att hoppa över denna verifieringskontroll."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Kan inte hitta"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Okänd ISO, hoppar över verifiering av kontrollsumma"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Hittar inte enheten %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Inte tillräckligt med ledigt utrymme på enheten.\n%d MB ISO + %d MB överlägg > %d MB ledigt utrymme"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Skapar %sMB beständig överlagring"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Enheten är inte monterad, så vi kan inte fastställa hur mycket ledigt utrymme där finns."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Ladda ned %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Hämtning färdig!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Kunde inte kopiera %(infile)s till %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Hämtning misslyckades: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Tar bort existerande Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Hämtar %s…"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Enheten är en loopback, hoppar över att återställa MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Kunde inte chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Anger unmount_device för \"%(device)s\""
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Fel vid sökning efter enheten"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Fel: Det går inte att sätta etiketten eller hämta UUID numret för din enhet. Kan inte fortsätta."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Fel: SHA1-summan för din Live CD är ogiltig. Du kan köra detta program med argumentet --noverify för att hoppa över denna verifieringskontroll."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Packar upp live-avbild till målenheten..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Kunde inte ta bort fil från tidigare LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formaterar %(device)s som FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 kontrollsumman är korrekt"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Kunde inte ta bort mapp från tidigare LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Verifieringen av ISO MD5 kontrollsumman misslyckades"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Hittar inte enheten %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Om du inte väljer en existerande Live ISO kommer den valda utgåvan att laddas ned åt dig."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Kunde inte skriva till %(device)s, hoppar över"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Installera\ngenom kloning"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Några partitioner på målenheten %(device)s är monterade. De kommer att avmonteras innan installationen påbörjas."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Installera Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Okänt filsystem. Din enhet kan behöva omformateras."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installationen slutförd!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Stöder inte filsystemet: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installationen är slutförd! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Okänt GLib-undantag vid försök att montera enhet: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installationen slutförd. Tryck OK för att stänga detta program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Kunde inte montera enheten: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installerar starthanteraren..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Hittade inga monteringspunkter"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Det är omöjligt att uppgradera enheten %(pretty_name)s eftersom den inte skapats med Tails-installationsprogrammet. Du bör istället använda %(action)s för att uppgradera Tails på den här enheten."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Misslyckades med att skapa LiveUSB!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Anger unmount_device för \"%(device)s\""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Säkerställ att du packar upp hela liveusb-creator zip-filen innan du kör detta program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Avmonterar monterade filsystem på \"%(device)s\""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Se till att din USB-pinne är inkopplat och formaterad med filsystemet FAT"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Avmonterar \"%(udi)s\" på \"%(device)s\""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Montering %s existerar efter avmontering"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Inget ledigt utrymme på enheten %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partitionerar enheten %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Hittade inga monteringspunkter"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Uppdaterar egenskaper för systempartitionen %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Inte tillräckligt med ledigt utrymme på enheten.\n%d MB ISO + %d MB överlägg > %d MB ledigt utrymme"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Enheten '%(device)s' stöds inte, anmäl detta som en bugg."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partitionen är FAT16; Begränsar överlagringsstorlek till 2 GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Försöker fortsätta ändå."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partitionen är FAT32; Begränsar överlagringsstorlek till 4 GB"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verifierar filsystem…"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitionerar enheten %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Kunde inte byta etikett på volymen: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Bestående lagring"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installerar starthanteraren..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Beständigt lagringsutrymme (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Det gick inte att hitta modulen \"%s\" COM32"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Bekräfta ditt val av enhet"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Tar bort %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Uppdaterar utgåvor..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s är redan startbar"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Utgåvor uppdaterade!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Kunde inte hitta partitionen"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Tar bort %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formaterar %(device)s som FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Tar bort existerande Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Det gick inte att hitta syslinux gptmbr.bin"
+
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Läser extraherad MBR från %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Det gick inte att läsa extraheraded MBR från %(path)s"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Nollställer Master Boot Record på %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Välj Live-ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Installerar OLPC startfil..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Enheten är en loopback, hoppar över att återställa MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Några partitioner på målenheten %(device)s är monterade. De kommer att avmonteras innan installationen påbörjas."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Källtypen stöder inte verifikation av ISO MD5 kontrollsummor, hoppar över"
+msgid "Calculating the SHA1 of %s"
+msgstr "Beräknar SHA1 för %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synkroniserar data på disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Målenhet"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Fel vid sökning efter enheten"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Enheten \"%(pretty_name)s\" är för liten för att installera Tails (minst %(size)s GB krävs)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Hittade ingen enhet som stöds."
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Den valda filen kan inte läsas. Var god rätta till rättigheterna eller välj en annan fil."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Se till att din USB-pinne är inkopplat och formaterad med filsystemet FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Ett problem inträffade när följande kommando kördes: `%(command)s`.\nEn mer detaljerad feljournal har skrivits till '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Ej stött filsystem: %s\nGör en säkerhetskopia och formatera din USB-pinne med filsystemet FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Denna knapp låter dig bläddra efter en existerande Live ISO som du laddat ned tidigare. Om du inte väljer någon kommer en utgåva att laddas ned automatiskt åt dig."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Kunde inte läsa Win32_LogicalDisk; win32com frågan gav inte något svar"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Den här knappen startar processen för att skapa Live systemet. Detta innebär möjligtvis nedladdning av en utgåva (om inte en redan existerande valts), uppackning av ISO-filen till en USB enhet, skapandet av beständig överlagring, och installation av starthanteraren."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Kan inte hitta"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Detta är USB-minnet som du vill installera Live systemet på. Denna enhet måste vara formaterad med ett FAT filsystem."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Se till att du extraherar hela zip-filen för tails-installer innan du kör programmet."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Okänd utgåva: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Hämtar %s…"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Detta är förloppsfältet som visar hur långt skapandet av LiveUSB processen har kommit."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Fel: Det går inte att sätta etiketten eller hämta UUID numret för din enhet. Kan inte fortsätta."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Detta är statuskonsollen där alla meddelanden sparas."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installationen är slutförd! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Försöker fortsätta ändå."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails installation misslyckades!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Varning: Detta verktyg måste köras som en administratör. För att göra detta, högerklicka på ikonen och välj Egenskaper. Under kompatibilitets-fliken markerar du rutan \"Kör detta program som administratör\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails Installer"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB enhet hittad"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "Ingen enhet som är lämplig för att installera Tails kunde hittas"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Kunde inte byta etikett på volymen: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Anslut en USB-flash-enhet eller SD-kort med minst %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Kunde inte chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Kunde inte kopiera %(infile)s till %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Kunde inte hitta någon USB-enhet."
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Enheten \"%(pretty_name)s\" är för liten för att installera Tails (minst %(size)s GB krävs)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Hittade ingen enhet som stöds."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Installera genom kloning\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Kunde inte hitta partitionen"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Installera från ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Kunde inte läsa Win32_LogicalDisk; win32com frågan gav inte något svar"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Det är omöjligt att uppgradera enheten %(pretty_name)s eftersom den inte skapats med Tails-installationsprogrammet. Du bör istället använda %(action)s för att uppgradera Tails på den här enheten."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "Ett fel inträffade under installationen av Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Uppdaterar utgåvor..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Utgåvor uppdaterade!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installationen slutförd!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Installation slutfördes."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Kunde inte montera enheten"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Kunde inte montera enheten: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Bekräfta ditt val av enhet"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Kunde inte ta bort mapp från tidigare LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Du är på väg att installera Tails på enheten %(size)s %(vendor)s %(model)s (%(device)s). All data på den valda enheten kommer att gå förlorad. Vill du fortsätta?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Kunde inte ta bort fil från tidigare LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Du är på väg att uppgradera Tails på enheten %(parent_size)s %(vendor)s %(model)s (%(device)s). Eventuell bestående lagring på den här enheten kommer att behållas som den är. Vill du fortsätta?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Hämtning färdig!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Hämtning misslyckades: "
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Du kan försöka igen för att återuppta din hämtning"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Kunde inte återställa MBR. Det kan vara så att du inte har `syslinux` paketet installerat."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Den valda filen kan inte läsas. Var god rätta till rättigheterna eller välj en annan fil."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Kunde inte använda den valda filen. Det kanske fungerar bättre om du flyttar din ISO till roten av din enhet (t.ex: C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Kunde inte skriva till %(device)s, hoppar över"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Okänd ISO, hoppar över verifiering av kontrollsumma"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Okänt dbus undantag vid försök att montera enheten: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s valda"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Okänt filsystem. Din enhet kan behöva omformateras."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Det gick inte att hitta LiveOS på ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Okänd utgåva: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Det gick inte att gissa underliggande blockenhet: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Avmonterar \"%(udi)s\" på \"%(device)s\""
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "Det uppstod ett problem vid körning av `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Avmonterar monterade filsystem på \"%(device)s\""
+msgid "'%s' does not exist"
+msgstr "'%s' finns inte"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Enheten '%(device)s' stöds inte, anmäl detta som en bugg."
+msgid "'%s' is not a directory"
+msgstr "'%s' är inte en katalog"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Stöder inte filsystemet: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Hoppar över '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Ej stött filsystem: %s\nGör en säkerhetskopia och formatera din USB-pinne med filsystemet FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Uppdaterar egenskaper för systempartitionen %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Uppgradera\ngenom kloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Installera Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Uppgradera\nfrån ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Använd existerande Live-system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Installera"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifierar ISO MD5 kontrollsumma"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verifierar SHA1 kontrollsumma av LiveCD avbild..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verifierar SHA256 kontrollsumma av LiveCD avbild..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Uppgradera"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verifierar filsystem…"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Varning: Att skapa ett nytt varaktigt överlägg kommer radera ditt nuvarande."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Varning: Detta verktyg måste köras som en administratör. För att göra detta, högerklicka på ikonen och välj Egenskaper. Under kompatibilitets-fliken markerar du rutan \"Kör detta program som administratör\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Skrev till enheten med %(speed)d MB/sek"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Du är på väg att installera Tails på enheten %(size)s %(vendor)s %(model)s (%(device)s). All data på den valda enheten kommer att gå förlorad. Vill du fortsätta?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Du är på väg att uppgradera Tails på enheten %(parent_size)s %(vendor)s %(model)s (%(device)s). Eventuell bestående lagring på den här enheten kommer att behållas som den är. Vill du fortsätta?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Du använder en äldre version av syslinux-extlinux som inte stöder ext4 filsystem."
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Du kan försöka igen för att återuppta din hämtning"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Du måste köra det här programmet som root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "eller"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/sw/sw.po b/sw/sw.po
index d0920eb..b5e74a3 100644
--- a/sw/sw.po
+++ b/sw/sw.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Swahili (http://www.transifex.com/otf/torproject/language/sw/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: sw\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/szl/szl.po b/szl/szl.po
index 68fa6bb..f1bfc0d 100644
--- a/szl/szl.po
+++ b/szl/szl.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Silesian (http://www.transifex.com/otf/torproject/language/szl/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: szl\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ta/ta.po b/ta/ta.po
index 6eba4ef..6d48883 100644
--- a/ta/ta.po
+++ b/ta/ta.po
@@ -9,9 +9,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-07-15 15:49+0000\n"
-"Last-Translator: Ephraim Raj <ephraimraj11299 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Tamil (http://www.transifex.com/otf/torproject/language/ta/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -19,591 +19,551 @@ msgstr ""
"Language: ta\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "நீங்கள் இந்த பயன்பாட்டை root இயக்க வேண்டும"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
-#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s நிறுவி"
-
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s தேர்வுசெய்யபட்டது"
-
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr ""
-#: ../liveusb/creator.py:1097
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%s already bootable"
-msgstr "ஏற்கனவே துவங்கக்கூடிய %s"
-
-#: ../liveusb/launcher_ui.py:160
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "உலவு"
-
-#: ../liveusb/dialog.py:167
+#: ../tails_installer/creator.py:341
msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "கண்டுபிடிக்க முடியவில்லை"
-
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "%s கருவியை கண்டுபிடிக்க முடியவில்லை"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "கருவி இன்னும் ஏற்றப்படவில்லை, ஆகையால் எங்களால் வெற்றிட அளவை தீர்மானிக்க முடியாது."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s பதிவிறக்கு"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "பதிவிறக்கம் முடிந்தது!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "பதிவிறக்கம் தோல்வியடைந்தது: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "பதிவிறக்கப்படுகிறது %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "இதுவொரு loopback கருவி, MBR மீட்டமைத்தல் செய்யபடாது "
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "%s கருவியை கண்டுபிடிக்க முடியவில்லை"
+
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/creator.py:393
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails-ஐ நிறுவு"
-
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "நிறுவுதல் முடிந்தது!"
-
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:785
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "நிறுவுதல் முடிந்தது! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "நிறுவுதல் முடிந்தது. இந்த செயல்முறையை மூட 'சரி' அழுத்தவும்."
-
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:789
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB செய்ய முடியவில்லை"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:944
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "எப்படியும் முயற்சி தொடர்கிறது."
+
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:980
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr ""
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "ஏற்கனவே துவங்கக்கூடிய %s"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1174
+#, python-format
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "இதுவொரு loopback கருவி, MBR மீட்டமைத்தல் செய்யபடாது "
+
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr ""
+
+#: ../tails_installer/creator.py:1353
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/creator.py:1356
+#, python-format
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "இலக்கு கருவி"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "கண்டுபிடிக்க முடியவில்லை"
-#: ../liveusb/gui.py:438
-#, python-format
+#: ../tails_installer/creator.py:1477
msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:73
#, python-format
+msgid "Downloading %s..."
+msgstr "பதிவிறக்கப்படுகிறது %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "நிறுவுதல் முடிந்தது! (%s)"
+
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/dialog.py:171
+#: ../tails_installer/gui.py:353
msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:442
+#, python-format
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "எப்படியும் முயற்சி தொடர்கிறது."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB கருவி காணப்பட்டது"
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:488
#, python-format
-msgid "Unable to change volume label: %(message)s"
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr ""
+
+#: ../tails_installer/gui.py:504
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "USB கருவி காணப்படவில்லை"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:1354
-msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "நிறுவுதல் முடிந்தது!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr ""
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "பதிவிறக்கம் முடிந்தது!"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "பதிவிறக்கம் தோல்வியடைந்தது: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgid "%(filename)s selected"
+msgstr "%(filename)s தேர்வுசெய்யபட்டது"
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails-ஐ நிறுவு"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "நீங்கள் இந்த பயன்பாட்டை root இயக்க வேண்டும"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "அல்லது"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/te/te.po b/te/te.po
index 8c829cd..2a9c94e 100644
--- a/te/te.po
+++ b/te/te.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Telugu (http://www.transifex.com/otf/torproject/language/te/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: te\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Cannot find device %s"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:513
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:692
#, python-format
-msgid "Download %(distribution)s"
+msgid ""
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Downloading %s..."
-msgstr "డౌన్లోడింగ్: %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "పొరపాటు: మీ పరికరం యొక్క లేబుల్ లేక UUID సెట్ చచెయ్యలేదు. కొనసాగించలేరు"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:775
+#, python-format
+msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "సంస్థాపన పూర్తి! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "లైవ్ యిు ఎన్ బి సృష్టికి విఫలమైంది!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Partitioning device %(device)s"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
+#, python-format
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
+#, python-format
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
-#, python-format
-msgid "Removing %(file)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1356
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
+#: ../tails_installer/creator.py:1477
msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "తెలియని విడుదల: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "డౌన్లోడింగ్: %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "పొరపాటు: మీ పరికరం యొక్క లేబుల్ లేక UUID సెట్ చచెయ్యలేదు. కొనసాగించలేరు"
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
-msgstr ""
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "సంస్థాపన పూర్తి! (%s)"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/gui.py:438
-#, python-format
+#: ../tails_installer/gui.py:353
msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "హెచ్చరిక: ఈ టూల్ అడ్మినిస్ట్రేటర్గా రన్ చెయ్యాలి. ఇది చేయుటకు, ఐకాన్ పైన క్లిక్ చేసి ప్రాపర్టీస్ తెరవండి."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/dialog.py:158
-msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:480
+#, python-format
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:170
-msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:504
+#, python-format
+msgid ""
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "తెలియని విడుదల: %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "హెచ్చరిక: ఈ టూల్ అడ్మినిస్ట్రేటర్గా రన్ చెయ్యాలి. ఇది చేయుటకు, ఐకాన్ పైన క్లిక్ చేసి ప్రాపర్టీస్ తెరవండి."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/te_IN/te_IN.po b/te_IN/te_IN.po
index eca5050..cf4f06b 100644
--- a/te_IN/te_IN.po
+++ b/te_IN/te_IN.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Telugu (India) (http://www.transifex.com/otf/torproject/language/te_IN/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: te_IN\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/templates/liveusb-creator.pot b/templates/liveusb-creator.pot
index ef4d11d..d421d93 100644
--- a/templates/liveusb-creator.pot
+++ b/templates/liveusb-creator.pot
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: English (http://www.transifex.com/otf/torproject/language/en/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: en\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "You must run this application as root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Extracting live image to the target device..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Wrote to device at %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Setting up OLPC boot file..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Verifying SHA1 checksum of LiveCD image..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Verifying SHA256 checksum of LiveCD image..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n\n<li>The USB stick that you install on is formatted and all data is lost.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n\n<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Browse"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "By allocating extra space on your USB stick for a persistent overlay, you will be able to store data and make permanent modifications to your live operating system. Without it, you will not be able to save data that will persist after a reboot."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Calculating the SHA1 of %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Cannot find"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Unknown ISO, skipping checksum verification"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Cannot find device %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Creating %sMB persistent overlay"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Device is not yet mounted, so we cannot determine the amount of free space."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Download %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Download complete!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Download failed: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Removing existing Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Downloading %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Drive is a loopback, skipping MBR reset"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Unable to chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Entering unmount_device for '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Error probing device"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Extracting live image to the target device..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Unable to remove file from previous LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Formatting %(device)s as FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum passed"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Unable to remove directory from previous LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Cannot find device %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "If you do not select an existing Live ISO, the selected release will be downloaded for you."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Unable to write on %(device)s, skipping."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Install\nby cloning"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Install Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Unknown filesystem. Your device may need to be reformatted."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Installation complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Unsupported filesystem: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Installation complete! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "Unknown GLib exception while trying to mount device: %(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Unable to mount device: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Installing bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "No mount points found"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "It is impossible to upgrade the device %(pretty_name)s because it was not created using Tails Installer. You should instead use %(action)s to upgrade Tails on this device."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB creation failed!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Entering unmount_device for '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Make sure to extract the entire liveusb-creator zip file before running this program."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Unmounting mounted filesystems on '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Unmounting '%(udi)s' on '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Mount %s exists after unmounting"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "No free space on device %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Partitioning device %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "No mount points found"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Updating properties of system partition %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Not enough free space on device.\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Unsupported device '%(device)s', please report a bug."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Trying to continue anyway."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Verifying filesystem..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Partitioning device %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Unable to change volume label: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Persistent Storage"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Installing bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "Could not find the '%s' COM32 module"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Please confirm your device selection"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Removing %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Refreshing releases..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s already bootable"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Releases updated!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Unable to find partition"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Removing %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Formatting %(device)s as FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Removing existing Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "Could not find syslinux' gptmbr.bin"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "Reading extracted MBR from %s"
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "Could not read the extracted MBR from %(path)s"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Resetting Master Boot Record of %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Select Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Setting up OLPC boot file..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Drive is a loopback, skipping MBR reset"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Some partitions of the target device %(device)s are mounted. They will be unmounted before starting the installation process."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Source type does not support verification of ISO MD5 checksum, skipping"
+msgid "Calculating the SHA1 of %s"
+msgstr "Calculating the SHA1 of %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Synchronizing data on disk..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Target Device"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Error probing device"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "The device \"%(pretty_name)s\" is too small to install Tails (at least %(size)s GB is required)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Unable to find any supported device"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "The selected file is unreadable. Please fix its permissions or select another file."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Make sure your USB key is plugged in and formatted with the FAT filesystem"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "There was a problem executing the following command: `%(command)s`.\nA more detailed error log has been written to '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "This button allows you to browse for an existing Live system ISO that you have previously downloaded. If you do not select one, a release will be downloaded for you automatically."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "This button will begin the LiveUSB creation process. This entails optionally downloading a release (if an existing one wasn't selected), extracting the ISO to the USB device, creating the persistent overlay, and installing the bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Cannot find"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "This is the USB stick that you want to install your Live system on. This device must be formatted with the FAT filesystem."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "Make sure to extract the entire tails-installer zip file before running this program."
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Unknown release: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Downloading %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "This is the progress bar that will indicate how far along in the LiveUSB creation process you are"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Error: Cannot set the label or obtain the UUID of your device. Unable to continue."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "This is the status console, where all messages get written to."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Installation complete! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Trying to continue anyway."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails installation failed!"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails Installer"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB drive found"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "No device suitable to install Tails could be found"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Unable to change volume label: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "Please plug a USB flash drive or SD card of at least %0.1f GB."
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Unable to chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Unable to find any USB drive"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "The device \"%(pretty_name)s\" is too small to install Tails (at least %(size)s GB is required)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Unable to find any supported device"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "\"Install by cloning\""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Unable to find partition"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Install from ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "It is impossible to upgrade the device %(pretty_name)s because it was not created using Tails Installer. You should instead use %(action)s to upgrade Tails on this device."
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "An error happened while installing Tails"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Refreshing releases..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Releases updated!"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Installation complete!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "Installation was completed."
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Unable to mount device"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Please confirm your device selection"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Unable to remove directory from previous LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "You are going to install Tails on the %(size)s %(vendor)s %(model)s device (%(device)s). All data on the selected device will be lost. Continue?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Unable to remove file from previous LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s device (%(device)s). Any persistent volume on this device will remain unchanged. Continue?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Download complete!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Download failed: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "You can try again to resume your download"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "The selected file is unreadable. Please fix its permissions or select another file."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Unable to use the selected file. You may have better luck if you move your ISO to the root of your drive (ie: C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Unable to write on %(device)s, skipping."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Unknown ISO, skipping checksum verification"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s selected"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "Unable to find LiveOS on ISO"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Unknown release: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr "Could not guess underlying block device: %s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Unmounting '%(udi)s' on '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "There was a problem executing `%s`.\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Unmounting mounted filesystems on '%(device)s'"
+msgid "'%s' does not exist"
+msgstr "'%s' does not exist"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Unsupported device '%(device)s', please report a bug."
+msgid "'%s' is not a directory"
+msgstr "'%s' is not a directory"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Unsupported filesystem: %s"
+msgid "Skipping '%(filename)s'"
+msgstr "Skipping '%(filename)s'"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Unsupported filesystem: %s\nPlease backup and format your USB key with the FAT filesystem."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "There was a problem executing `%s`.%s\n%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Updating properties of system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "Could not open device for writing."
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Upgrade\nby cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "Use existing Live system ISO:"
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "Select a distribution to download:"
+
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "Target Device:"
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Install Tails"
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Upgrade\nfrom ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "To run Tails Installer you need an ISO image which can be downloaded from the Tails website: <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "Install"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "• Install Tails on a new USB stick."
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "• The USB stick that you install on is formatted and all data is lost."
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "Upgrade"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "• Upgrade a Tails USB stick to the version of an ISO image."
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr "• The encrypted persistent storage of the Tails USB stick that you upgrade is preserved."
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Warning: This tool needs to be run as an Administrator. To do this, right click on the icon and open the Properties. Under the Compatibility tab, check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "Need help? Read the <a href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "Install by cloning"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "You are going to install Tails on the %(size)s %(vendor)s %(model)s device (%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr "• Install Tails on another USB stick by copying the Tails system that you are currently using."
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s device (%(device)s). Any persistent volume on this device will remain unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr "• The encrypted persistent storage of the Tails USB stick that you are currently using is not copied."
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "Upgrade by cloning"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "You are using an old version of syslinux-extlinux that does not support the ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "• Upgrade another Tails USB stick to the same version of Tails that you are currently using."
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "Upgrade from ISO"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr "• Upgrade another Tails USB stick to the version of an ISO image."
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
diff --git a/tg/tg.po b/tg/tg.po
index 234ac43..b047632 100644
--- a/tg/tg.po
+++ b/tg/tg.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Tajik (http://www.transifex.com/otf/torproject/language/tg/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: tg\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/th/th.po b/th/th.po
index 5a70201..2dedcb2 100644
--- a/th/th.po
+++ b/th/th.po
@@ -14,9 +14,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-10-12 17:21+0000\n"
-"Last-Translator: Thai Localization\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Thai (http://www.transifex.com/otf/torproject/language/th/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -24,591 +24,551 @@ msgstr ""
"Language: th\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "คุณต้องรันโปรแกรมนี้เป็นรูท"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ติดตั้งจาก ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "แตก live image ลงในอุปกรณ์ปลายทาง"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s ตัวติดตั้ง"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "เขียนไปยังอุปกรณ์ ณ %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s ถูกเลือก"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "กำลังติดตั้งไฟล์บูท OLPC"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "มีปัญหาขณะเรียกคำสั่ง `%(command)s`.⏎\nรายละเอียดปูมข้อผิดพลาดเพิ่มเติม เขียนไว้ที่ '%(filename)s'"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "ตรวจสอบค่า SHA1 checksum ของภาพ LiveCD"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s บูตได้อยู่แล้ว"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "ตรวจสอบค่า SHA256 checksum ของภาพ LiveCD"
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr ""
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "ผิดพลาด: SHA1 ของ Live CD ของคุณผิดพลาด คุณสามารถรันโปรแกรมนี้โดยใช้อากิวเมนต์ --noverify เพื่อข้ามการตรวจสอบนี้"
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ไม่รู้จัก ISO จะข้ามการตรวจสอบ checksum"
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "มีที่ว่างบนอุปกรณ์ไม่พอ\n%dMB ISO + %dMB ที่เก็บข้อมูล > %dMB พื้นที่ว่าง"
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
+msgstr "กำลังสร้างที่เก็บถาวร %sMB"
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "เรียกดู"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "ไม่สามารถคัดลอก %(infile)s ไปที่ %(outfile)s: %(message)s"
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "จากการเพิ่มพื้นที่เก็บถาวรในแผ่น USB คุณสามารถที่จะเก็บข้อมูลและทำการเปลี่ยนแปลงต่อระบบปฏิบัติการได้ ถ้าคุณไม่ทำคุณไม่สามารถที่จะเก็บข้อมูลหลังการรีบูต"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "ถอดออกจาก Live OS ที่มีชื่อ"
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "กำลังคำนวณ the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "ไม่สามารถ chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "ไม่สามารถค้นหา"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "ไม่สามารถถอดแฟ้มออกจาก LiveOS: %(message)s ก่อนหน้า"
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "ไม่สามารถถอดออกไดเรกทอรีจาก LiveOS: %(message)s ก่อนหน้า"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr "ไม่สามารถหาอุปกรณ์ %s"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
-msgstr "กำลังสร้างที่เก็บถาวร %sMB"
+msgid "Unable to write on %(device)s, skipping."
+msgstr "ไม่สามารถเขียนบน %(device)s, ข้ามไป"
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "เนื่องจากยังไม่มีการเชื่อมต่อกับดีไวซ์ ก็ไม่สามารถที่จะกำหนดพื้นทีี่ที่เหลืออยู่ได้"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Partition บน %(device)s ถูกเมานท์อยู่ จะยกเลิกการเม้านท์ก่อนเริ่มกระบวนการติดตั้ง"
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
-msgstr "ดาวน์โหลด %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "ไม่ทราบระบบแฟ้ม อุปกรณ์ของคุณอาจจะจำเป็นต้องถูกจัดระบบใหม่"
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "ดาวน์โหลดเสร็จสิ้น!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "ระบบไฟล์ไม่สนับสนุน: %s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "ดาวน์โหลดล้มเหลว:"
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
-msgstr "กำลังดาวน์โหลด %s..."
+msgid "Unable to mount device: %(message)s"
+msgstr "ไม่สามารถใส่อุปกรณ์ %(message)s"
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "ไดรฟ์ loopback, ข้ามไปเริ่มใหม่ MBR"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "ไม่พบจุดเมาต์"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "กำลังเข้าสู่ unmount_device สำหรับ '%(device)s'"
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "ตรวจสอบข้อผิดพลาดของอุปกรณ์"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "ผิดพลาด: ไม่สามารถกำหนดชื่อหรือหา UUID ของอุปกรณ์ของคุณ ไม่สามารถดำเนินการต่อได้"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "ผิดพลาด: SHA1 ของ Live CD ของคุณผิดพลาด คุณสามารถรันโปรแกรมนี้โดยใช้อากิวเมนต์ --noverify เพื่อข้ามการตรวจสอบนี้"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "แตก live image ลงในอุปกรณ์ปลายทาง"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "ถอดระบบแฟ้มที่เชื่อมต่ออยู่ที่ '%(device)s'"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:789
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "ฟอร์แมต %(device)s เป็น FAT32"
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "เลิกการเชื่อมต่อ %(udi)s' ที่ '%(device)s'"
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "กำลังตรวจสอบ ISO MD5 checksum"
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
+msgstr "ใส่ %s ที่มีอยู่หลังถอดออก"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "การตรวจสอบค่า ISO MD5 checksum ล้มเหลว"
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
+msgstr "แบ่งที่อุปกรณ์ %(device)s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "ถ้าคุณไม่ได้เลือก Live ISO ที่มีอยู่ก่อนแล้ว รุ่นที่เลือกจะถูกดาวน์โหลดให้คุณ"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "ปรับปรุงค่าของ system partition %(system_partition)s"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
-msgstr ""
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "อุปกรณ์ไม่รองรับ '%(device)s' กรุณารายงานบั้ก"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "ลง Tails"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "ลองทำต่อไปไม่ว่าอย่างไรก็ตาม"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "การติดตั้งเสร็จสิ้น!"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "กำลังตรวจสอบระบบไฟล์..."
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "การติดตั้งเสร็จสิ้น! (%s)"
-
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "การติดตั้งเสร็จสิ้นแล้ว กด OK เพื่อปิดโปรแกรมนี้"
+msgid "Unable to change volume label: %(message)s"
+msgstr "ไม่สามารถเปลี่ยนชื่อของแผ่น: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
msgid "Installing bootloader..."
msgstr "กำลังติดตั้งบูตโหลดเดอร์..."
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1011
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "การสร้าง LiveUSB ไม่สำเร็จ!"
-
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "กรุณาแตกไฟล์ซิป liveusb-creator ทั้งไฟล์ก่อนเรียกใช้โปรแกรมนี้"
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "โปรดตรวจสอบให้แน่ใจว่าได้เสียบ USB key แล้วและถูกฟอร์แมตด้วยระบบไฟล์ FAT"
-
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Mount %s exists after unmounting"
-msgstr "ใส่ %s ที่มีอยู่หลังถอดออก"
+msgid "Removing %(file)s"
+msgstr "ถอดแฟ้มออก %(file)s"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1131
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "ไม่มีพื้นที่ว่างบนอุปกรณ์ %(device)s"
+msgid "%s already bootable"
+msgstr "%s บูตได้อยู่แล้ว"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "ไม่พบจุดเมาต์"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "ไม่พบพาร์ติชัน"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "มีที่ว่างบนอุปกรณ์ไม่พอ\n%dMB ISO + %dMB ที่เก็บข้อมูล > %dMB พื้นที่ว่าง"
-
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "พาร์ติชั่นเป็น FAT16 จะกำหนดขนาดที่เก็บข้อมูลเป็น 2G"
+msgid "Formatting %(device)s as FAT32"
+msgstr "ฟอร์แมต %(device)s เป็น FAT32"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "พาร์ทิชั่นเป็น FAT32 จะจำกัดขนาดที่เก็บข้อมูลเป็น 4G"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:1247
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "แบ่งที่อุปกรณ์ %(device)s"
-
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "ที่เก็บถาวร"
-
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "ข้อมูลถาวร (0 MB)"
-
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "ยืนยันการเลือกอุปกรณ์"
-
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "กำลังรีเฟรชรุ่นต่างๆ..."
-
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "ปรับปรุงรุ่นต่างๆแล้ว!"
+msgid "Reading extracted MBR from %s"
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Removing %(file)s"
-msgstr "ถอดแฟ้มออก %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "ถอดออกจาก Live OS ที่มีชื่อ"
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "เริ่ม Master Boot Record ใหม่ %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "เลือก Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "กำลังติดตั้งไฟล์บูท OLPC"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "ไดรฟ์ loopback, ข้ามไปเริ่มใหม่ MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Partition บน %(device)s ถูกเมานท์อยู่ จะยกเลิกการเม้านท์ก่อนเริ่มกระบวนการติดตั้ง"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "ประเภทของที่มาไม่สนับสนุนการตรวจสอบค่าของ ISO MD5 checksum, ข้าม"
+msgid "Calculating the SHA1 of %s"
+msgstr "กำลังคำนวณ the SHA1 of %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "กำลังประสานข้อมูลบนดิสก์"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr " อุปกรณ์เป้าหมาย"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "ตรวจสอบข้อผิดพลาดของอุปกรณ์"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr ""
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "ไม่พบอุปกรณ์ที่รองรับ"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "แฟ้มที่ถูกเลือกไม่สามารถอ่านได้ กรุณาแก้ไขสิทธิอนุญาตหรือเลือกแฟ้มอื่น"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "โปรดตรวจสอบให้แน่ใจว่าได้เสียบ USB key แล้วและถูกฟอร์แมตด้วยระบบไฟล์ FAT"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "มีปัญหาขณะเรียกคำสั่ง `%(command)s`.⏎\nรายละเอียดปูมข้อผิดพลาดเพิ่มเติม เขียนไว้ที่ '%(filename)s'"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "ระบบไฟล์ไม่สนับสนุน: %s\nโปรดสำรองข้อมูลและฟอร์แมต USB key ด้วยระบบไฟล์แบบ FAT"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "ปุ่มนี้อนุญาตให้คุณไล่ดู Live ISO ที่คุณเคยดาวน์โหลดมาก่อนหน้านี้ ถ้าคุณไม่เลือกอันไหนเลย รุ่นที่ออกจะถูกดาวน์โหลดให้คุณอัตโนมัติ"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "ไม่สามารถรับ Win32_LogicalDisk; win32com คำถามไม่ได้ผลลัพธ์ไดๆ"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "ปุ่มนี้จะเริ่มการสร้าง LiveUSB ซึ่งมีตัวเลือกที่จะดาวน์โหลดรุ่นใหม่ๆ (ถ้ารุ่นปัจจุบันไม่ได้ถูกเลือก) แตกไฟล์ ISO เข้าไปที่อุปกรณ์ USB สร้างพื้นที่เก็บฐาวร และติดตั้งบูตโหลดเดอร์"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "ไม่สามารถค้นหา"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "นี่คือแผ่น USB ที่คุณต้องการที่จะใช้ติดตั้งระบบ Live ควรที่จะฟอร์แมตอุปกรณ์นี้ด้วยระบบแฟ้ม FAT "
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "ไม่ทราบรุ่น: %s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "กำลังดาวน์โหลด %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "แถบบอกความคืบหน้านี้จะทำให้เห็นความคืบหน้าของการสร้าง LiveUSB"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "ผิดพลาด: ไม่สามารถกำหนดชื่อหรือหา UUID ของอุปกรณ์ของคุณ ไม่สามารถดำเนินการต่อได้"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "ข้อความทั้งหมดจะถูกบรรทึกไว้ที่คอนโซลสถานะ"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "การติดตั้งเสร็จสิ้น! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "ลองทำต่อไปไม่ว่าอย่างไรก็ตาม"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "เจอไดรฟ์ USB"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "คำเตือน: เครื่องมือนี้จำเป็นที่จะทำงานโดยผู้ดูแลระบบ ปฏิบัติโดยคลิกขวาที่ไอคอนและเปิดคุณสมบัติ อยู่ในแถบความเข้ากันได้, เลือกกล่อง \"ตรวจสอบการทำงานของโปรแกรมของผู้ดูแลระบบ\" "
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
+
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "ไม่สามารถเปลี่ยนชื่อของแผ่น: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "ไม่สามารถ chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "ไม่สามารถคัดลอก %(infile)s ไปที่ %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "ไม่พบไดรฟ์ยูเอสบีใดๆ"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "ไม่พบอุปกรณ์ที่รองรับ"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "ไม่พบพาร์ติชัน"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ติดตั้งจาก ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "ไม่สามารถรับ Win32_LogicalDisk; win32com คำถามไม่ได้ผลลัพธ์ไดๆ"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr ""
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "กำลังรีเฟรชรุ่นต่างๆ..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "ปรับปรุงรุ่นต่างๆแล้ว!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "การติดตั้งเสร็จสิ้น!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "ไม่สามารถเมานต์อุปกรณ์"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "ไม่สามารถใส่อุปกรณ์ %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "ยืนยันการเลือกอุปกรณ์"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "ไม่สามารถถอดออกไดเรกทอรีจาก LiveOS: %(message)s ก่อนหน้า"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "จะลง Tails บน %(size)s %(vendor)s %(model)s อุปกรณ์ (%(device)s) ข้อมูลทั้งหมดในอุปกรณ์นี้จะหายไป ให้ดำเนินการหรือไม่?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "ไม่สามารถถอดแฟ้มออกจาก LiveOS: %(message)s ก่อนหน้า"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "กำลังจะปรังปรุง Tails ใน %(parent_size)s %(vendor)s %(model)s อุปกรณ์ (%(device)s) ข้อมูลถาวรในอุปกรณ์นี้จะไม่ถูกเปลี่ยน ให้ดำเนินการ?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "ดาวน์โหลดเสร็จสิ้น!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "ดาวน์โหลดล้มเหลว:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "คุณสามารถลองอีกครั้งได้เพื่อดาวน์โหลดต่อ"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "ไม่สามารถเริ่มใหม่ MBR คุณอาจจะไม่ได้ติดตั้ง`syslinux` แพคเกจ"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "แฟ้มที่ถูกเลือกไม่สามารถอ่านได้ กรุณาแก้ไขสิทธิอนุญาตหรือเลือกแฟ้มอื่น"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "ไม่สามารถใช้แฟ้มที่เลือก อาจจะโชคดีกว่าถ้าย้าย ISO ไปไว้ที่รูตของไดรฟ์คุณ (ie: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "ไม่สามารถเขียนบน %(device)s, ข้ามไป"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ไม่รู้จัก ISO จะข้ามการตรวจสอบ checksum"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "ไม่ทราบการยกเว้น dbus ขณะพยายามใส่อุปกรณ์ %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s ถูกเลือก"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "ไม่ทราบระบบแฟ้ม อุปกรณ์ของคุณอาจจะจำเป็นต้องถูกจัดระบบใหม่"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "ไม่ทราบรุ่น: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "เลิกการเชื่อมต่อ %(udi)s' ที่ '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "ถอดระบบแฟ้มที่เชื่อมต่ออยู่ที่ '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "อุปกรณ์ไม่รองรับ '%(device)s' กรุณารายงานบั้ก"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "ระบบไฟล์ไม่สนับสนุน: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "ระบบไฟล์ไม่สนับสนุน: %s\nโปรดสำรองข้อมูลและฟอร์แมต USB key ด้วยระบบไฟล์แบบ FAT"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "ปรับปรุงค่าของ system partition %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "ลง Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "ใช้ ISO ระบบ Live ที่มีอยู่แล้ว"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "กำลังตรวจสอบ ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "ตรวจสอบค่า SHA1 checksum ของภาพ LiveCD"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "ตรวจสอบค่า SHA256 checksum ของภาพ LiveCD"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "กำลังตรวจสอบระบบไฟล์..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "คำเตือน: การสร้างที่เก็บข้อมูลจะลบอันก่อนหน้า"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "คำเตือน: เครื่องมือนี้จำเป็นที่จะทำงานโดยผู้ดูแลระบบ ปฏิบัติโดยคลิกขวาที่ไอคอนและเปิดคุณสมบัติ อยู่ในแถบความเข้ากันได้, เลือกกล่อง \"ตรวจสอบการทำงานของโปรแกรมของผู้ดูแลระบบ\" "
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "เขียนไปยังอุปกรณ์ ณ %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "จะลง Tails บน %(size)s %(vendor)s %(model)s อุปกรณ์ (%(device)s) ข้อมูลทั้งหมดในอุปกรณ์นี้จะหายไป ให้ดำเนินการหรือไม่?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "กำลังจะปรังปรุง Tails ใน %(parent_size)s %(vendor)s %(model)s อุปกรณ์ (%(device)s) ข้อมูลถาวรในอุปกรณ์นี้จะไม่ถูกเปลี่ยน ให้ดำเนินการ?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "คุณกำลังใช้ syslinux-extlinux รุ่นเก่า ซึ่งไม่สนับสนุนระบบแฟ้ม the ext4 "
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "คุณสามารถลองอีกครั้งได้เพื่อดาวน์โหลดต่อ"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "คุณต้องรันโปรแกรมนี้เป็นรูท"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "หรือ"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ti/ti.po b/ti/ti.po
index 8ece37f..f381330 100644
--- a/ti/ti.po
+++ b/ti/ti.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Tigrinya (http://www.transifex.com/otf/torproject/language/ti/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ti\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/tk/tk.po b/tk/tk.po
index 7a702f1..7975dfb 100644
--- a/tk/tk.po
+++ b/tk/tk.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Turkmen (http://www.transifex.com/otf/torproject/language/tk/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: tk\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/tr/tr.po b/tr/tr.po
index 1f1eed0..1f82434 100644
--- a/tr/tr.po
+++ b/tr/tr.po
@@ -13,16 +13,16 @@
# mrtmsy <mertamasya at gmail.com>, 2014
# muaz yadiyüzkırkiki, 2013
# muaz yadiyüzkırkiki, 2013
-# Ozancan Karataş <ozancankaratas96 at outlook.com>, 2015
+# Ozancan Karataş <ozanc27 at icloud.com>, 2015
# Volkan Gezer <volkangezer at gmail.com>, 2013-2014,2016
# Yasin Özel <iletisim at yasinozel.com.tr>, 2013
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-05-26 10:05+0000\n"
-"Last-Translator: Kaya Zeren <kayazeren at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Turkish (http://www.transifex.com/otf/torproject/language/tr/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -30,591 +30,551 @@ msgstr ""
"Language: tr\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Çoğalt ve Yükle\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Bu uygulamayı root kullanıcısı olarak çalıştırmalısınız"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"ISO'dan Yükle\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Hedef cihaza canlı resim çıkartılıyor..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Yükleyicisi"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Aygıta %(speed)d MB/saniye hızında yazıldı"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s seçildi"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "OLPC ön yükleme dosyası ayarlanıyor..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Şu komut yürütülürken bir sorun çıktı: `%(command)s`.\nAyrıntılı bir hata raporu '%(filename)s' dosyasına yazıldı."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "CanlıCD kalıbının SHA1 doğrulaması yapılıyor..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s zaten başlatılabilir"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "CanlıCD kalıbının SHA256 doğrulaması yapılıyor..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Yardım gerekiyor mu? <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">Belgeyi</span></a> okuyun.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Şu an kullandığınız Tails sistemi başka bir USB çubuğuna kopyalama yoluyla kurun...</li>\n<li>Kurulum yapacağınız USB çubuğu formatlanacak ve içındeki tüm veri silinecek.</li>\n<li>Şu an kullandığınız Tails USB çubuğundaki şifrelenmiş veri deposu kopyalanmadı</li>\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Bir Tails USB diskini şu anda kullandığınız sürüme güncelleyin.</li>\n\n<li>Güncelleyeceğiniz Tails USB diskindeki şifreli kalıcı depolama bölümü korunacak.</li>\n\n<li>Şu anda kullandığınız Tails USB diskindeki şifreli kalıcı depolama bölümü kopyalanmayacak.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Bir Tails USB diskini ISO kalıbındaki sürüme güncelleyin.</li>\n\n<li>Güncelleyeceğiniz Tails USB diskindeki şifreli kalıcı depolama bölümü korunacak.</li>\n\n<li>Şu anda kullandığınız Tails USB diskindeki şifreli kalıcı depolama bölümü kopyalanmayacak.</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Gözat"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "USB belleğinizde kalıcı kaplama için ek bir alan ayırarak, çalışan işletim sisteminizde kalıcı değişiklikler yapabilir ve veri depolayabilirsiniz. Bu olmadan, veriler kaydedilemeyeceğinden yeniden başlatma işleminden sonra saklanamaz."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "%s için SHA1 hesaplanıyor"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Hata: Çalışır CD için SHA1 geçersiz. Bu programı --noverify parametresi ile çalıştırarak bu doğrulama adımını atlayabilirsiniz."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Bulunamadı"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Bilinmeyen ISO, sağlaması doğrulaması atlanıyor"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "%s aygıtı bulunamadı"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Aygıtta yeterli boş alan yok.\n%dMB ISO + %dMB kaplama > %dMB boş alan"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "%sMB kalıcı kaplaması oluşturuluyor"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Aygıt henüz takılmadığından boş alan hesaplanamıyor."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "%(distribution)s indir"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "İndirme tamamlandı!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "%(infile)s %(outfile)s konumuna kopyalanamadı: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "İndirilemedi:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Varolan Canlı İşletim Sistemi kaldırılıyor"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "%s indiriliyor..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Sürücü kapalı bir çevrim. Ana ön yükleme kaydı (MBR) sıfırlaması atlanıyor"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "chmod yürütülemedi %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "'%(device)s' için unmount_device giriliyor"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Aygıt araştırılırken bir sorun çıktı"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Hata: Etiket ayarlanamıyor ya da aygıtınızın UUID kodu alınamıyor. İşlem sürdürülemiyor."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Hata: Çalışır CD için SHA1 geçersiz. Bu programı --noverify parametresi ile çalıştırarak bu doğrulama adımını atlayabilirsiniz."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Hedef cihaza canlı resim çıkartılıyor..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Önceki Canlı İşletim Sisteminden dosya silinemedi: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "%(device)s FAT32 olarak biçimlendiriliyor"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 sağlaması doğrulandı"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Önceki Canlı İşletim Sisteminden klasör silinemedi: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 sağlaması doğrulanamadı"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "%s aygıtı bulunamadı"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Varolan bir Canlı ISO seçmezseniz, seçilmiş sürüm indirilir."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "%(device)s aygıtına yazılamadı, atlanıyor."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Kopyalarak\nyükle"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "%(device)s hedef aygıtının bazı bölümleri takılmış. Bu bölümler yükleme işlemi başlamadan önce çaıkarılacak."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Tails Yazılımını Yükle"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Dosya sistemi bilinmiyor. Aygıtınızın yeniden biçimlendirilmesi gerekebilir."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Yükleme tamamlandı!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Dosya sistemi desteklenmiyor: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Yükleme tamamlandı! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Yükleme tamamlandı. Lütfen bu programı kapatmak için TAMAM üzerine tıklayın."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Aygıt takılamadı: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Bootloader yükleniyor..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Bir takılma noktası bulunamadı"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "%(pretty_name)s aygıtı Tails yükleyicisi tarafından oluşturulmamış olduğundan güncellenemedi. Bu aygıt üzerindeki Tails yazılımını %(action)s güncellemelisiniz."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB oluşturulamadı!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "'%(device)s' için unmount_device giriliyor"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Bu programı çalıştırmadan önce liveusb-creator zip dosyasının tamamını ayıkladığınızdan emin olun."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr " '%(device)s' üzerindeki takılı dosya sistemleri çıkarılıyor"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "USB belleğinizin takılı ve FAT dosya sistemi ile biçimlendirildiğinden emin olun"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "'%(udi)s' '%(device)s' aygıtı üzerinden çıkarılıyor"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Çıkarma işleminden sonra %s takılı"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "%(device)s aygıtında boş alan yok"
+msgid "Partitioning device %(device)s"
+msgstr "%(device)s aygıtı bölümlendiriliyor "
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Bir takılma noktası bulunamadı"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "%(system_partition)s sistem bölümünün özellikleri güncelleniyor"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Aygıtta yeterli boş alan yok.\n%dMB ISO + %dMB kaplama > %dMB boş alan"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Desteklenemeyen '%(device)s' aygıtı, lütfen bu hatayı bildirin."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Bölüm FAT16 biçiminde; Kaplama boyutu 2GB ile kısıtlı"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Yine de sürdürülmeye çalışılıyor."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Bölümü FAT32 biçiminde; Kaplama boyutu 4GB ile kısıtlı"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Dosya sistemi doğrulanıyor..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "%(device)s aygıtı bölümlendiriliyor "
+msgid "Unable to change volume label: %(message)s"
+msgstr "Birim etiketi değiştirişemedi: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Kalıcı Depolama"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Bootloader yükleniyor..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Kalıcı Depolama (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Lütfen aygıt seçiminizi onaylayın."
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr " %(file)s siliniyor"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Sürümler yenileniyor..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s zaten başlatılabilir"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Sürümler güncellendi!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Bölüm bulunamadı"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr " %(file)s siliniyor"
+msgid "Formatting %(device)s as FAT32"
+msgstr "%(device)s FAT32 olarak biçimlendiriliyor"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Varolan Canlı İşletim Sistemi kaldırılıyor"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "%s üzerindeki ana ön yükleme kaydı (MBR) sıfırlanıyor"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Canlı ISO kalıbını seçin"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "OLPC ön yükleme dosyası ayarlanıyor..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Sürücü kapalı bir çevrim. Ana ön yükleme kaydı (MBR) sıfırlaması atlanıyor"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "%(device)s hedef aygıtının bazı bölümleri takılmış. Bu bölümler yükleme işlemi başlamadan önce çaıkarılacak."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Kaynak türü ISO MD5 sağlama doğrulamasını desteklemediğinden bu adım atlanıyor."
+msgid "Calculating the SHA1 of %s"
+msgstr "%s için SHA1 hesaplanıyor"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Diskteki veriler eşitleniyor..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Hedef Aygıt"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Aygıt araştırılırken bir sorun çıktı"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "\"%(pretty_name)s\" aygıtı Tails yazılımının yüklenmesi için çok küçük (en az %(size)s GB gereklidir)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Herhangi bir desteklenen aygıt bulunamadı"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Seçilen dosya okunamıyor. Lütfen dosya izinlerini denetleyin ya da başka bir dosya seçin."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "USB belleğinizin takılı ve FAT dosya sistemi ile biçimlendirildiğinden emin olun"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Şu komut yürütülürken bir sorun çıktı: `%(command)s`.\nAyrıntılı bir hata raporu '%(filename)s' dosyasına yazıldı."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Dosya sistemi desteklenmiyor: %s\nLütfen USB belleğinizi yedekleyip FAT dosya sistemi ile biçimlendirin."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Bu düğme daha önce yüklediğiniz varolan Canlı sistem ISO kalıplarına göz atmanızı sağlar. Bir sürüm seçmezseniz sizin için bir sürüm kendiliğinden indirilir."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Win32_LogicalDisk değeri alınamadı; win32com sorgusu bir sonuç döndürmedi"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Bu düğme, Canlı USB oluşturma sürecini başlatır. Bu süreçte, isteğe bağlı olarak bir sürüm indirilir (varolan bir sürüm seçilmediyse), ISO kalıbı USB aygıtına ayıklanır, kalıcı kaplama oluşturulur ve ön yükleyici kurulur."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Bulunamadı"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Bu aygıta Canlı sistem yükleneceğinden, FAT dosya sistemi ile biçimlendirilmelidir. "
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Sürüm bilinmiyor: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "%s indiriliyor..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Bu ilerleme çubuğu, Canlı USB oluşturma sürecinin hangi adımında bulunduğunuzu görüntüler."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Hata: Etiket ayarlanamıyor ya da aygıtınızın UUID kodu alınamıyor. İşlem sürdürülemiyor."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Tüm iletiler bu durum panosuna yazılır."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Yükleme tamamlandı! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Yine de sürdürülmeye çalışılıyor."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB sürücüsü bulundu"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Uyarı: Bu araç Yönetici olarak çalıştırılmalıdır. Bunu yapmak için, araç simgesine sağ tıklayıp Özellikler sayfasını açın ve Uyumluluk sekmesinde \"Bu programı Yönetici olarak aç\" seçeneğini tıklayın."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Birim etiketi değiştirişemedi: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "chmod yürütülemedi %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "%(infile)s %(outfile)s konumuna kopyalanamadı: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Herhangi bir USB sürücü bulunamadı"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "\"%(pretty_name)s\" aygıtı Tails yazılımının yüklenmesi için çok küçük (en az %(size)s GB gereklidir)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Herhangi bir desteklenen aygıt bulunamadı"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Bölüm bulunamadı"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"ISO'dan Yükle\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Win32_LogicalDisk değeri alınamadı; win32com sorgusu bir sonuç döndürmedi"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "%(pretty_name)s aygıtı Tails yükleyicisi tarafından oluşturulmamış olduğundan güncellenemedi. Bu aygıt üzerindeki Tails yazılımını %(action)s güncellemelisiniz."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Sürümler yenileniyor..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Sürümler güncellendi!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Yükleme tamamlandı!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Aygıt takılamadı"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Aygıt takılamadı: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Lütfen aygıt seçiminizi onaylayın."
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Önceki Canlı İşletim Sisteminden klasör silinemedi: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Tails'i %(size)s %(vendor)s %(model)s aygıtı (%(device)s) üzerine yüklemek üzeresiniz. Seçilen aygıttaki tüm veri kaybedilecek. Devam edilsin mi?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Önceki Canlı İşletim Sisteminden dosya silinemedi: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "%(parent_size)s %(vendor)s %(model)s üzerinde (%(device)s) bulunan Tails yazılımını güncelleyeceksiniz. Aygıt üzerindeki kalıcı birimler değiştirilmeden kalır. Devam etmek istiyor musunuz?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "İndirme tamamlandı!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "İndirilemedi:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "İndirmeyi sürdürmeyi deneyebilirsiniz"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "MBR sıfırlanamadı. Bilgisayarınıza 'syslinux' paketi yüklenmemiş olabilir."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Seçilen dosya okunamıyor. Lütfen dosya izinlerini denetleyin ya da başka bir dosya seçin."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Seçilmiş dosya kullanılamadı. ISO kalıbını diskinizin kök klasörüne taşımanız işe yarayabilir (C:\\ gibi)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "%(device)s aygıtına yazılamadı, atlanıyor."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Bilinmeyen ISO, sağlaması doğrulaması atlanıyor"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Aygıt takılmaya çalışılırken bilinmeyen dbus hatası: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s seçildi"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Dosya sistemi bilinmiyor. Aygıtınızın yeniden biçimlendirilmesi gerekebilir."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Sürüm bilinmiyor: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "'%(udi)s' '%(device)s' aygıtı üzerinden çıkarılıyor"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr " '%(device)s' üzerindeki takılı dosya sistemleri çıkarılıyor"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Desteklenemeyen '%(device)s' aygıtı, lütfen bu hatayı bildirin."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Dosya sistemi desteklenmiyor: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Dosya sistemi desteklenmiyor: %s\nLütfen USB belleğinizi yedekleyip FAT dosya sistemi ile biçimlendirin."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "%(system_partition)s sistem bölümünün özellikleri güncelleniyor"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Kopyalarak\ngüncelle"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Tails Yazılımını Yükle"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "ISO kalıbından\ngüncelle"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Varolan Canlı sistem ISO kalıbını kullan"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "ISO MD5 salaması doğrulanıyor"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "CanlıCD kalıbının SHA1 doğrulaması yapılıyor..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "CanlıCD kalıbının SHA256 doğrulaması yapılıyor..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Dosya sistemi doğrulanıyor..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Uyarı: Yeni bir kalıcı kaplama oluşturmak varolan kaplamanın silinmesine neden olur."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Uyarı: Bu araç Yönetici olarak çalıştırılmalıdır. Bunu yapmak için, araç simgesine sağ tıklayıp Özellikler sayfasını açın ve Uyumluluk sekmesinde \"Bu programı Yönetici olarak aç\" seçeneğini tıklayın."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Aygıta %(speed)d MB/saniye hızında yazıldı"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Tails'i %(size)s %(vendor)s %(model)s aygıtı (%(device)s) üzerine yüklemek üzeresiniz. Seçilen aygıttaki tüm veri kaybedilecek. Devam edilsin mi?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "%(parent_size)s %(vendor)s %(model)s üzerinde (%(device)s) bulunan Tails yazılımını güncelleyeceksiniz. Aygıt üzerindeki kalıcı birimler değiştirilmeden kalır. Devam etmek istiyor musunuz?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "syslinux-extlinux yazılımının ext4 dosya sistemini desteklemeyen eski bir sürümünü kullanıyorsunuz"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "İndirmeyi sürdürmeyi deneyebilirsiniz"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Bu uygulamayı root kullanıcısı olarak çalıştırmalısınız"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "ya da"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/tzm/tzm.po b/tzm/tzm.po
index c4bfca4..332adc7 100644
--- a/tzm/tzm.po
+++ b/tzm/tzm.po
@@ -7,9 +7,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2012-10-03 17:40+0000\n"
-"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Central Atlas Tamazight (http://www.transifex.com/otf/torproject/language/tzm/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: tzm\n"
"Plural-Forms: nplurals=2; plural=(n == 0 || n == 1 || (n > 10 && n < 100) ? 0 : 1;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ug at Arab/ug at Arab.po b/ug at Arab/ug at Arab.po
index 42e8f09..9114ed7 100644
--- a/ug at Arab/ug at Arab.po
+++ b/ug at Arab/ug at Arab.po
@@ -8,9 +8,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-06-08 07:03+0000\n"
-"Last-Translator: crash x <xmr.crashx at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Uighur (Arabic) (http://www.transifex.com/otf/torproject/language/ug@Arab/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: ug at Arab\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr ""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "\"يجب عليك تشغيل البرنامج كـ\"روت"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr ""
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "التحقق من نظام الملفات"
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
-msgstr ""
+msgid "Removing %(file)s"
+msgstr "جاري إزالة %(file)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr ""
-
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "!الاصدارات محدثه"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr "جاري إزالة %(file)s"
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr ""
+msgid "Unknown release: %s"
+msgstr "اصدار غير معروف %s"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr ""
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "!الاصدارات محدثه"
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "غير قادر على ايجاد أي محرك أقراص USB"
-
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr ""
-
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to mount device: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "يمكنك محاولة استئناف التحميل مرة اخرى"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
-msgstr "اصدار غير معروف %s"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "التحقق من نظام الملفات"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "يمكنك محاولة استئناف التحميل مرة اخرى"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "\"يجب عليك تشغيل البرنامج كـ\"روت"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "أو"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/uk/uk.po b/uk/uk.po
index 6f08055..aeb7132 100644
--- a/uk/uk.po
+++ b/uk/uk.po
@@ -13,9 +13,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
-"Last-Translator: Vira Motorko <ato4ka at i.ua>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Ukrainian (http://www.transifex.com/otf/torproject/language/uk/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -23,591 +23,551 @@ msgstr ""
"Language: uk\n"
"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Клонувати та Встановити\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Необхідно запустити програму з-під root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Встановити з ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Видобування живого образу на цільовий пристрій..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Установщик"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Записано на пристрій на %(speed)d MB/sec"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s обрано"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Налаштування файлу завантаження OLPC..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Помилка виконання команди: `%(command)s`.\nДетальний журнал помилок збережений у '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Перевірка SHA1 контрольної суми LiveCD образу..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s вже завантажувальний"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Перевірка SHA256 контрольної суми LiveCD образу..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Потрібна допомога? Прочитайте <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">документацію</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Встановити Tails на іншу USB-флешку, скопіювавши систему Tails, яку Ви зараз використовуєте.</li>\n\n<li>USB-флешка, яку Ви вставили, відформатована і всі дані втрачено.</li>\n\n<li>Зашифроване постійне сховище на Tails USB-флешці, що Ви зараз використовуєте, не скопійоване.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Оновіть іншу USB-флешку Tails до тієї ж версії Tails, яку Ви використовуєте зараз.</li>\n\n<li>Зашифрована постійна пам'ять на флешці Tails, яку Ви оновлюєте, зберігається.</li>\n\n<li>Зашифрована постійна пам'ять на флешці Tails, яку Ви використовуєте зараз, не копіюється.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Оновіть іншу USB-флешку Tails до версії образу ISO.</li>\n\n<li>Зашифрована постійна пам'ять на флешці Tails, яку Ви оновлюєте, зберігається.</li>\n\n<li>Зашифрована постійна пам'ять на флешці Tails, яку Ви використовуєте зараз, не копіюється.</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Огялд"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Шляхом виділення додаткового місця на пристрої для постійного сховища, Ви отримаєте можливість зберігати дані і робити постійні модифікації Вашої живої ОС. Без цього у Вас не вийде зберегти дані так, щоб вони залишилися після перевантаження."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Розрахунок SHA1 від %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Помилка: Неправильна SHA1 у вашому образі Live CD. Можна запустити програму з аргументом --noverify, щоб пропустити перевірку."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Не вдалося знайти"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "Невідомий ISO, перевірка контрольної суми пропущена"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Пристрій %s не знайдено"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Недостатньо місця на пристрої.\n%dMB ISO + %dMB постійне сховище > %dMB вільного місця"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Створення %sМБ постійного сховища"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Пристрій наразі не змонтовано, тому не можна визначити кількість вільного місця."
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Завантаження %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Завантаження завершено!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Не вдалося скопіювати %(infile)s на %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Помилка при завантаженні: "
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Видалення існуючої Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Завантажується %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Цей диск є циклічним пристроєм, пропускаємо очищення MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Не вдалося chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Відкриття незмонтованого пристрою для '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Помилка зондування пристрою"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Помилка: Не вдається встановити позначку чи отримати UUID вашого пристрою. Неможливо продовжити."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Помилка: Неправильна SHA1 у вашому образі Live CD. Можна запустити програму з аргументом --noverify, щоб пропустити перевірку."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Видобування живого образу на цільовий пристрій..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Не вдалося видалити файл з попередньої LiveOS: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Форматування %(device)s у FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "Перевірка контрольної суми ISO MD5 пройшла успішно"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Не вдалося видалити директорію з попередньої LiveOS: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Не вдалося перевірити контрольну суму ISO MD5"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Пристрій %s не знайдено"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Якщо ви не виберете існуючий Live ISO, вибрана версія буде завантажена для вас."
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Неможливо записати на %(device)s, пропускаю."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Встановити\nчерез клонування"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Деякі розділи цільового пристрою %(device)s змонтовані. Вони будуть демонтовані перед початком установки."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Встановити Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Невідома файлова система. Ваш пристрій потребує переформатування."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Установка завершена!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Непідтримувана файлова система: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Установка завершена! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Установка була завершена. Натисніть Гаразд, щоб закрити програму."
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Не вдалося змонтувати пристрій: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Установка завантажувача..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Немає точок монтування"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Неможливо оновити пристрій %(pretty_name)s тому, що його було створено без використання Tails Installer. Вам необхідно використати %(action)s для оновлення Tails на цьому пристрої."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Помилка при створенні LiveUSB!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Відкриття незмонтованого пристрою для '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Обов'язково розпакуйте zip-файл liveusb-creator цілком перед запуском цієї програми"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Демонтування файлових систем на '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Перевірте, що USB-пристрій приєднаний та форматований (FAT)"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Розмонтування '%(udi)s' на '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Точка монтування %s існує після демонтування"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "На пристрої %(device)s немає вільного місця"
+msgid "Partitioning device %(device)s"
+msgstr "Розмітка пристрою %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Немає точок монтування"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Оновити властивості системного розділу %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Недостатньо місця на пристрої.\n%dMB ISO + %dMB постійне сховище > %dMB вільного місця"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Непідтримуваний пристрій '%(device)s', будь ласка, повідомте про помилку."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Розділ FAT16: Розмір оверлею можливий не більше 2ГБ"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Спроба все одно продовжити."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Розділ відформатований в FAT32; Розмір постійного сховища обмежений 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Перевірка файлової системи..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Розмітка пристрою %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Не вдалося змінити мітку тому: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Постійне сховище"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Установка завантажувача..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Постійне сховище (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Будь-ласка, підтвердіть вибір пристрою"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Видалення %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Оновлення списку релізів..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s вже завантажувальний"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Список релізів оновлений"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Не вдалося знайти розділ"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Видалення %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Форматування %(device)s у FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Видалення існуючої Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Очищення головного завантажувального запису %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Виберіть Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Налаштування файлу завантаження OLPC..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Цей диск є циклічним пристроєм, пропускаємо очищення MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Деякі розділи цільового пристрою %(device)s змонтовані. Вони будуть демонтовані перед початком установки."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Тип джерела не підтримує перевірку контрольних сум MD5 для ISO, пропускаємо"
+msgid "Calculating the SHA1 of %s"
+msgstr "Розрахунок SHA1 від %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Синхронізація даних на диску..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Цільовий пристрій"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Помилка зондування пристрою"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Пристрій \"%(pretty_name)s\" замалий для встановлення Tails (потрібно хочаб %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Не вдалося знайти пристрій, що підтримується"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Вибраний файл не читається. Виправте файл або виберіть інший."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Перевірте, що USB-пристрій приєднаний та форматований (FAT)"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Помилка виконання команди: `%(command)s`.\nДетальний журнал помилок збережений у '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Непідтримувана файлова система: %s\nЗробіть резервну копію даних та відформатуйте USB-пристрій у файлову систему FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Кнопка перегляду існуючого ISO файлу живої системи, який Ви завантажили до цього. Якщо Ви його не виділите, то реліз буде завантажено автоматично."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Неможливо отримати Win32_LogicalDisk; win32com нічого не повернув"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Кнопка запуску створення LiveUSB. Це може призвести до завантаження релізу (якщо не вибрано один з наявних), розпакуванні ISO на USB-пристрій, створення постійного сховища і встановлення завантажувача."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Не вдалося знайти"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Це USB-накопичувач на який ви збираєтеся встановити Live-систему. Пристрій повинен бути відформатований в FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Невідомий випуск: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Завантажується %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Це смуга перебігу, яка показує скільки залишається до завершення установки LiveUSB."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Помилка: Не вдається встановити позначку чи отримати UUID вашого пристрою. Неможливо продовжити."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Це консоль стану, куди пишуться усі повідомлення."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Установка завершена! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Спроба все одно продовжити."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "USB диск знайдений"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Увага: Для роботи потрібні права Адміністратора. Що б отримати їх, натисніть правою кнопкою на піктограму програми і відкрийте Властивості. У вкладці Сумісність поставте галочку на \"Виконувати цю програму від імені адміністратора\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Не вдалося змінити мітку тому: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Не вдалося chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Не вдалося скопіювати %(infile)s на %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Не вдалося знайти жодного USB пристрою"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Пристрій \"%(pretty_name)s\" замалий для встановлення Tails (потрібно хочаб %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Не вдалося знайти пристрій, що підтримується"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Не вдалося знайти розділ"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Встановити з ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Неможливо отримати Win32_LogicalDisk; win32com нічого не повернув"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Неможливо оновити пристрій %(pretty_name)s тому, що його було створено без використання Tails Installer. Вам необхідно використати %(action)s для оновлення Tails на цьому пристрої."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Оновлення списку релізів..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Список релізів оновлений"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Установка завершена!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Не вдалося змонтувати пристрій"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Не вдалося змонтувати пристрій: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Будь-ласка, підтвердіть вибір пристрою"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Не вдалося видалити директорію з попередньої LiveOS: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Ви збираєтеся встановити Tails на пристрій %(size)s %(vendor)s %(model)s (%(device)s). Всі дані будуть втрачені. Продовжити?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Не вдалося видалити файл з попередньої LiveOS: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Ви збираєтеся оновити Tails на пристрої %(parent_size)s %(vendor)s %(model)s (%(device)s). Постійне сховище на цьому томі залишиться без змін. Продовжити?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Завантаження завершено!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Помилка при завантаженні: "
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Можете спробувати продовжити завантаження"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Неможливо очистити MBR. Можливо, у Вас не встановлений пакет `syslinux`."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Вибраний файл не читається. Виправте файл або виберіть інший."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Неможливо використовувати вказаний файл. Спробуйте перемістити ISO в корінь диска (наприклад, C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Неможливо записати на %(device)s, пропускаю."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "Невідомий ISO, перевірка контрольної суми пропущена"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Невідомий виняток dbus під час монтування пристрою: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s обрано"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Невідома файлова система. Ваш пристрій потребує переформатування."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Невідомий випуск: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Розмонтування '%(udi)s' на '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Демонтування файлових систем на '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Непідтримуваний пристрій '%(device)s', будь ласка, повідомте про помилку."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Непідтримувана файлова система: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Непідтримувана файлова система: %s\nЗробіть резервну копію даних та відформатуйте USB-пристрій у файлову систему FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Оновити властивості системного розділу %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Оновити\nчерез клонування"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Встановити Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Оновити\nз ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Використовувати існуючий Live ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Перевірка контрольної суми ISO MD5"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Перевірка SHA1 контрольної суми LiveCD образу..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Перевірка SHA256 контрольної суми LiveCD образу..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Перевірка файлової системи..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Увага: Створення нового постійного шару видалить наявний шар."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Увага: Для роботи потрібні права Адміністратора. Що б отримати їх, натисніть правою кнопкою на піктограму програми і відкрийте Властивості. У вкладці Сумісність поставте галочку на \"Виконувати цю програму від імені адміністратора\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Записано на пристрій на %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Ви збираєтеся встановити Tails на пристрій %(size)s %(vendor)s %(model)s (%(device)s). Всі дані будуть втрачені. Продовжити?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Ви збираєтеся оновити Tails на пристрої %(parent_size)s %(vendor)s %(model)s (%(device)s). Постійне сховище на цьому томі залишиться без змін. Продовжити?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Ви використовуєте стару версію syslinux-extlinux, яка не підтримує файлову систему ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Можете спробувати продовжити завантаження"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Необхідно запустити програму з-під root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "або"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ur/ur.po b/ur/ur.po
index 306fd8a..7c15cf6 100644
--- a/ur/ur.po
+++ b/ur/ur.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Urdu (http://www.transifex.com/otf/torproject/language/ur/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ur\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "یا"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/ur_PK/ur_PK.po b/ur_PK/ur_PK.po
index 4b74d44..72fa5d7 100644
--- a/ur_PK/ur_PK.po
+++ b/ur_PK/ur_PK.po
@@ -8,8 +8,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-03-21 16:31+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Urdu (Pakistan) (http://www.transifex.com/otf/torproject/language/ur_PK/)\n"
"MIME-Version: 1.0\n"
@@ -18,591 +18,551 @@ msgstr ""
"Language: ur_PK\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "براؤز کیجیے"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "یا"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/uz/uz.po b/uz/uz.po
index 52056fd..bd24cb8 100644
--- a/uz/uz.po
+++ b/uz/uz.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Uzbek (http://www.transifex.com/otf/torproject/language/uz/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: uz\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/ve/ve.po b/ve/ve.po
index 8ae76f5..9871f1b 100644
--- a/ve/ve.po
+++ b/ve/ve.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Venda (http://www.transifex.com/otf/torproject/language/ve/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: ve\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/vi/vi.po b/vi/vi.po
index 3404f89..11021d3 100644
--- a/vi/vi.po
+++ b/vi/vi.po
@@ -11,9 +11,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-10-03 04:23+0000\n"
-"Last-Translator: Khanh Nguyen <nguyenduykhanh85 at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Vietnamese (http://www.transifex.com/otf/torproject/language/vi/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -21,591 +21,551 @@ msgstr ""
"Language: vi\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "\"Nhân bản và Cài đặt\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "Bạn phải chạy ứng dụng này với quyền root"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "\"Cài đặt từ ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "Đang trích xuất hình ảnh tới ổ đĩa đích..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s Bản cài đặt"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "Đã được viết vào thiết bị ở %(speed)d MB/giây"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s được chọn"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "Đang cài đặt tập tin khởi động OLPC"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "Có vấn đề xảy ra khi thực thi lệnh dưới đây: `%(command)s`.\nMột nhật ký chi tiết hơn của lỗi đã được ghi vào '%(filename)s'."
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "Đang xác minh SHA1 checksum của hình ảnh LiveCD..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s đã có thể khởi động"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "Đang xác minh SHA256 checksum của hình ảnh LiveCD"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Cần giúp đỡ? Hãy đọc <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">tài liệu</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Cài đặt Tails trên một USB khác bằng cách chép hệ thống Tails mà bạn đang sử dụng..</li>\n\n<li>USB mà bạn cài đặt lên bị định dạng và tất cả dữ liệu đã mất.</li>\n\n<li>Vùng lưu trữ bền vững được mã hóa của USB chứa Tails mà bạn đang sử dụng chưa được sao chép.</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Nâng cấp một USB chứa Tails khác tới cùng phiên bản Tails mà bạn đang sử dụng.</li>\n\n<li>Vùng lưu trữ bên vững đã được mã hóa của USB chứa Tails mà bạn nâng cấp đã được bảo lưu.</li>\n\n<li>Vùng lưu trữ bền vững đã được mã hóa của USB chứa Tails mà bạn đang sử dụng chưa được sao chép.</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>Nâng cấp một USB khác chứa Tails tới phiên bản của một ISO image.</li>\n\n\n<li>Vùng lưu trữ bền vững đã được mã hóa của USB chứa Tails mà bạn đã nâng cấp đã được bảo lưu.</li>\n\n\n<li>Vùng lưu trữ bền vững đã được mã hóa của USB chứa Tails mà bạn đang sử dụng chưa được sao chép.</li>\n\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "Duyệt qua"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "Bằng việc phân chia thêm khoảng trống trên USB dành cho một vùng cố định, bạn có thể lưu dữ liệu và tạo sự thay đổi vĩnh viễn đối với hệ thống vận hành hiện nay của bạn. Nếu không có nó, bạn không thể lưu dữ liệu mà có thể tồn tại sau khi khởi động lại."
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "Đang tính toán SHA của %s"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "Lỗi: SHA1 của Live CD không hợp lệ. Bạn có thể chạy chương trình với -noverify argument để bỏ qua việc kiểm tra này."
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "Không thể tìm thấy"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "ISO không xác định, bỏ qua việc kiểm tra checksum"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "Không thể tìm thấy thiết bị %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "Không đủ khoảng trống trên thiết bị\n%dMB ISO + %dMB overlay > %dMB free space"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Đang tạo vùng cố định %sMB"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "Thiết bị chưa được gắn vào, nên chúng tôi không thể xác định dung lượng còn trống"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "Tải về %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "Tải xuống hoàn tất!"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "Không thể chép %(infile)s tới %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "Tải xuống thất bại:"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "Đang loại bỏ Live OS đang tồn tại"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "Đang tải xuống %s"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "Ổ đĩa là loopback, bỏ qua việc thiết lập lại MBR"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "Không thể chmod %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "Đang nhập thiết bị_chưa gắn cho '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "Thiết bị gặp lỗi thăm dò"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "Lỗi: Không thể gán nhãn hoặc lấy UUID từ thiết bị của bạn. Không thể tiếp tục."
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "Lỗi: SHA1 của Live CD không hợp lệ. Bạn có thể chạy chương trình với -noverify argument để bỏ qua việc kiểm tra này."
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "Đang trích xuất hình ảnh tới ổ đĩa đích..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "Không thể gỡ bỏ tập tin từ LiveOS trước: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "Đang định dạng %(device)s ở dạng FAT32"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 checksum đã được chấp nhận"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "Không thể gỡ bỏ thư mục từ LiveOS trước: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "Việc kiểm tra ISO MD5 checksum thất bại"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "Không thể tìm thấy thiết bị %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "Nếu bạn không chọn một Live ISO hiện có, phiên bản được chọn sẵn sẽ được tải xuống cho bạn"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "Không thể viết lên %(device)s, đang bỏ qua."
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "Cài đặt\nbằng cách nhân bản"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "Một vài phân vùng của thiết bị %(device)s đã được gắn lên. Chũng sẽ bị gỡ ra trước khi bắt đầu quá trình cài đặt."
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "Cài đặt Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "Định dạng không xác định. Thiết bị của bạn có thể cần được định dạng lại."
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "Cài đặt hoàn tất!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "Tập tin hệ thống không được hỗ trợ: %s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "Cài đặt hoàn tất! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "Cài đặt đã hoàn tất. Bấm OK để tắt chương trình này"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "Không thể gắn thiết bị: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "Đang cài đặt chương trình khởi động..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "Không có ổ đĩa được tìm thấy"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "Không thể nâng cấp thiết bị %(pretty_name)s bởi vì nó không được tạo thành bằng Tails Installer. Bạn nên dùng %(action)s để nâng cấp Tails trên thiết bị này."
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "Việc tạo LiveUSB thất bại!"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "Đang nhập thiết bị_chưa gắn cho '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "Cần chắc chắn là trích xuất toàn bộ file nén liveusb-creator trước khi chạy chương trình này."
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "Đang gỡ tập tin hệ thống đã được gắn trên '%(device)s'"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "Cần đảm bảo USB của bạn được cắm vào và được format với định dạng FAT."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "Đang gỡ '%(udi)s' trên '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "Việc gắn %s thoát ra sau khi gỡ bỏ"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "Không có khoảng trống trên thiết bị %(device)s"
+msgid "Partitioning device %(device)s"
+msgstr "Đang phân vùng thiết bị %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "Không có ổ đĩa được tìm thấy"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Đang cập nhật thuộc tính của phân vùng hệ thống %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "Không đủ khoảng trống trên thiết bị\n%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "Thiết bị không được hỗ trợ '%(device)s', vui lòng báo lỗi."
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "Phân vùng là FAT16; Dung lượng giới hạn của vùng là 2GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "Cứ tiếp tục."
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "Phân vùng là FAT32; Dung lượng giới hạn của vùng là 4GB"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "Đang xác minh tập tin hệ thống..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "Đang phân vùng thiết bị %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "Không thể đổi tên ổ đĩa: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "Dung lượng bền vững"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "Đang cài đặt chương trình khởi động..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "Dung lượng bền vững (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "Vui lòng xác nhận lựa chọn thiết bị của bạn"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "Đang loại bỏ %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "Đang làm mới phiên bản"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s đã có thể khởi động"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "Phiên bản đã được làm mới!"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "Không thể tìm thấy phân vùng"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "Đang loại bỏ %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "Đang định dạng %(device)s ở dạng FAT32"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "Đang loại bỏ Live OS đang tồn tại"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Đang thiết lập lại Master Boot Record của %s"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "Lựa chọn Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "Đang cài đặt tập tin khởi động OLPC"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "Ổ đĩa là loopback, bỏ qua việc thiết lập lại MBR"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "Một vài phân vùng của thiết bị %(device)s đã được gắn lên. Chũng sẽ bị gỡ ra trước khi bắt đầu quá trình cài đặt."
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "Loại hình của nguồn không hỗ trợ việc xác minh của ISO MD5 checksum, đang bỏ qua"
+msgid "Calculating the SHA1 of %s"
+msgstr "Đang tính toán SHA của %s"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "Đang đồng bộ hóa dữ liệu trên ổ đĩa..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "Thiết bị đích"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "Thiết bị gặp lỗi thăm dò"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "Thiết bị \"%(pretty_name)s\" quá nhỏ để cài đặt Tails (yêu cầu ít nhất %(size)s GB)."
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "Không thể tìm thấy bất kỳ thiết bị được hỗ trợ nào"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "Những tập tin được chọn không thể đọc được. Vui lòng sửa quyền của nó hoặc chọn một tập tin khác."
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "Cần đảm bảo USB của bạn được cắm vào và được format với định dạng FAT."
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "Có vấn đề xảy ra khi thực thi lệnh dưới đây: `%(command)s`.\nMột nhật ký chi tiết hơn của lỗi đã được ghi vào '%(filename)s'."
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "Tập tin hệ thống không được hỗ trợ: %s\nVui lòng sao lưu và định dạng lại USB của bạn với file hệ thống định dạng FAT."
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "Nút này cho phép bạn duyệt một Live system ISO mà bạn đã tải về trước đó. Nếu bạn không lựa chọn một cái, một phiên bản sẽ được tự động tải về cho bạn."
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "Không thể lấy Win32_LogicalDisk; truy vấn win32com không trả bất kỳ kết quả nào"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "Nút này sẽ bắt đầu quá trình tạo LiveUSB. Việc này đòi hỏi việc tải về một cách tùy chọn một phiên bản (nếu một phiên bản đang có chưa được chọn), trích xuất ISO sang thiết bị USB, tạo một vùng bền vững, và cài đặt bootloader."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "Không thể tìm thấy"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "Đây là thanh USB mà bạn muốn cài lên hệ thống Live. Thiết bị này phải được định dạng file hệ thống FAT."
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "Phiên bản không xác định: %s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "Đang tải xuống %s"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "Đây là thanh tiến độ sẽ chỉ ra quá trình tạo LiveUSB đã được bao lâu rồi."
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "Lỗi: Không thể gán nhãn hoặc lấy UUID từ thiết bị của bạn. Không thể tiếp tục."
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "Đây là tình trạng của bàn điều khiển, nơi mọi thông điệp được viết vào."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "Cài đặt hoàn tất! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "Cứ tiếp tục."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "Ổ đĩa USB được tìm thấy"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "Cảnh báo: Công cụ này cần phải chạy với quyền quản trị. Để làm được điều này, bấm chuột phải vào biểu tượng và mở Thuộc tính. Ở thẻ Tương thích, chọn hộp \"Chạy chương trình với quyền quản trị\"."
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "Không thể đổi tên ổ đĩa: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "Không thể chmod %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "Không thể chép %(infile)s tới %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "Không thể tìm thấy bất kỳ ổ USB nào"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "Thiết bị \"%(pretty_name)s\" quá nhỏ để cài đặt Tails (yêu cầu ít nhất %(size)s GB)."
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "Không thể tìm thấy bất kỳ thiết bị được hỗ trợ nào"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "Không thể tìm thấy phân vùng"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "\"Cài đặt từ ISO\""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "Không thể lấy Win32_LogicalDisk; truy vấn win32com không trả bất kỳ kết quả nào"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "Không thể nâng cấp thiết bị %(pretty_name)s bởi vì nó không được tạo thành bằng Tails Installer. Bạn nên dùng %(action)s để nâng cấp Tails trên thiết bị này."
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "Đang làm mới phiên bản"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "Phiên bản đã được làm mới!"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "Cài đặt hoàn tất!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "Không thể gắn thiết bị"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "Không thể gắn thiết bị: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "Vui lòng xác nhận lựa chọn thiết bị của bạn"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "Không thể gỡ bỏ thư mục từ LiveOS trước: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "Bạn đang cài đặt Tails trên %(size)s %(vendor)s %(model)s thiết bị\n(%(device)s). Tất cả dữ liệu trên thiết bị sẽ bị xóa. Bạn muốn tiếp tục?"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "Không thể gỡ bỏ tập tin từ LiveOS trước: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "Bạn đang nâng cấp Tails trên %(parent_size)s %(vendor)s %(model)s thiết bị\n(%(device)s). Tất cả các ổ lưu trữ thường trực\nsẽ được giữ nguyên. Bạn muốn tiếp tục?"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "Tải xuống hoàn tất!"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "Tải xuống thất bại:"
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "Bạn có thể thử lại để tiếp tục việc tải xuống"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "Không thể thiết lập lại MBR. Bạn có thể không có gói `syslinux` đã cài."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "Những tập tin được chọn không thể đọc được. Vui lòng sửa quyền của nó hoặc chọn một tập tin khác."
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Không thể sử dụng tập tin được chọn. Bạn có thể may mắn hơn nếu bạn di duyển ISO của bạn tới nền của thiết bị của bạn (ví dụ: C:\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "Không thể viết lên %(device)s, đang bỏ qua."
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "ISO không xác định, bỏ qua việc kiểm tra checksum"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "Có sự loại dbus không xác định trong khi đang gắn thiết bị: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s được chọn"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "Định dạng không xác định. Thiết bị của bạn có thể cần được định dạng lại."
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "Phiên bản không xác định: %s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "Đang gỡ '%(udi)s' trên '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "Đang gỡ tập tin hệ thống đã được gắn trên '%(device)s'"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "Thiết bị không được hỗ trợ '%(device)s', vui lòng báo lỗi."
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "Tập tin hệ thống không được hỗ trợ: %s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "Tập tin hệ thống không được hỗ trợ: %s\nVui lòng sao lưu và định dạng lại USB của bạn với file hệ thống định dạng FAT."
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "Đang cập nhật thuộc tính của phân vùng hệ thống %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "Nâng cấp\nbằng cách nhân bản"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "Cài đặt Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "Nâng cấp\ntừ ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "Sử dụng Live system ISO đang tồn tại"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "Đang xác minh ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "Đang xác minh SHA1 checksum của hình ảnh LiveCD..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "Đang xác minh SHA256 checksum của hình ảnh LiveCD"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "Đang xác minh tập tin hệ thống..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "Cảnh báo: Việc tạo phân vùng bền vững sẽ xóa phân vùng đang tồn tại của bạn."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "Cảnh báo: Công cụ này cần phải chạy với quyền quản trị. Để làm được điều này, bấm chuột phải vào biểu tượng và mở Thuộc tính. Ở thẻ Tương thích, chọn hộp \"Chạy chương trình với quyền quản trị\"."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "Đã được viết vào thiết bị ở %(speed)d MB/giây"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "Bạn đang cài đặt Tails trên %(size)s %(vendor)s %(model)s thiết bị\n(%(device)s). Tất cả dữ liệu trên thiết bị sẽ bị xóa. Bạn muốn tiếp tục?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "Bạn đang nâng cấp Tails trên %(parent_size)s %(vendor)s %(model)s thiết bị\n(%(device)s). Tất cả các ổ lưu trữ thường trực\nsẽ được giữ nguyên. Bạn muốn tiếp tục?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "Bạn đang sử dụng phiên bản cũ của syslinux-extlinux, không hỗ trợ định dạng ext4"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "Bạn có thể thử lại để tiếp tục việc tải xuống"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "Bạn phải chạy ứng dụng này với quyền root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "Hoặc"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/wa/wa.po b/wa/wa.po
index 0519ca2..1552144 100644
--- a/wa/wa.po
+++ b/wa/wa.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Walloon (http://www.transifex.com/otf/torproject/language/wa/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: wa\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/wo/wo.po b/wo/wo.po
index cc941fa..b06641b 100644
--- a/wo/wo.po
+++ b/wo/wo.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Wolof (http://www.transifex.com/otf/torproject/language/wo/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: wo\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
diff --git a/zh_CN/zh_CN.po b/zh_CN/zh_CN.po
index be66dbf..a756185 100644
--- a/zh_CN/zh_CN.po
+++ b/zh_CN/zh_CN.po
@@ -5,6 +5,7 @@
# Translators:
# khi, 2013
# Chi-Hsun Tsai <chihsun.tsai at gmail.com>, 2017
+# g ghost <ghost at ghostblog.info>, 2017
# paperbag, 2016
# bnw, 2014
# JasonZ <pbbqdd at gmail.com>, 2015
@@ -15,15 +16,15 @@
# Sanya chang <408070986 at qq.com>, 2013
# Windson yang <wiwindson at outlook.com>, 2015
# YF <yfdyh000 at gmail.com>, 2016
-# YF <yfdyh000 at gmail.com>, 2013-2015
+# YF <yfdyh000 at gmail.com>, 2013-2015,2017
# 甘 露 <rhythm.gan at gmail.com>, 2009
msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2017-03-16 00:51+0000\n"
-"Last-Translator: Chi-Hsun Tsai <chihsun.tsai at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-08 11:54+0000\n"
+"Last-Translator: YF <yfdyh000 at gmail.com>\n"
"Language-Team: Chinese (China) (http://www.transifex.com/otf/torproject/language/zh_CN/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +32,551 @@ msgstr ""
"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "“克隆和安装”"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "你必须使用root权限来运行本程序"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "“从 ISO 安装”"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "提取实况映像给目标设备..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s 安装程序"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "写入设备，写入速度 %(speed)d MB/s"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s 已选取"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "正在设定 OLPC 启动文件..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "执行以下指令时出错:‘%(command)s’。\n更详细的错误日志已写入‘%(filename)s’。"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "正在验证 LiveCD 映像的 SHA1 校验值..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s 已经是可引导盘"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "正在验证 LiveCD 映像的 SHA256 校验值..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">需要帮助？请参阅 <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">文档</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>通过拷贝你正在使用的Tails系统以在另一个U盘上安装Tails。</li>\n\n<li>此安装U盘已被格式化U盘上所有数据丢失。</li>\n\n<li>你正在使用的Tails U盘被加密的持久存储器不能被拷贝</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>更新另一个Tails U盘到和你正在使用的Tails相同的版本。</li>\n\n<li>所更新的Tails U盘加密持久存储器受到了保护</li>\n\n<li>你正在使用Tails U盘加密的持久存储器未被拷贝</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>更新另一个Tails U盘到ISO镜像版本。</li>\n\n<li>所更新的加密Tails U盘持久存储器受到了保护</li>\n\n<li>你正在使用的加密Tails U盘持久存储器被未被拷贝</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "浏览"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "通过在 U 盘上为持久覆盖分配额外空间，你将能够存储数据并对你的自生操作系统作出永久性的修改；否则，你保存的数据在重启之后将不会继续存在。"
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "正在计算 %s 的 SHA1 校验值"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "错误：Live CD 的 SHA1 值不符。您可以使用 --noverify 参数运行本程序来绕过验证。"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "找不到"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "未知的 ISO，正在跳过校验值验证"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "无法找到设备 %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "设备可用空间不足。\n%dMB ISO + %dMB 覆盖 > %dMB 可用空间"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "正在创建 %sMB 持久覆盖"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "设备未挂载，无法确定可用空间容量。"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "下载 %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "下载完成！"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "无法复制 %(infile)s 至 %(outfile)s : %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "下载失败！"
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "正在移除现存的 Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "正在下载 %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "驱动器为环回 ，跳过 MBR 重设"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "无法更改权限 %(file)s：%(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "输入 '%(device)s' 的卸载设备"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "检测设备时出错"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "错误：无法设定标签或获得你设备的UUID。 不能继续。"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "错误：Live CD 的 SHA1 值不符。您可以使用 --noverify 参数运行本程序来绕过验证。"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "提取实况映像给目标设备..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "无法从之前的 LiveOS 中删除文件：%(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "正在格式化 %(device)s 为 FAT32 格式"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO 映像的 MD5 校验和验证通过"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "无法从之前的 LiveOS 中删除目录：%(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO 映像的 MD5 校验和验证失败"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "无法找到设备 %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "如果未选择现有的 Live ISO，将下载已选中的发布版本。"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "无法向 %(device)s 中写入，正在跳过。"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "安装\n通过克隆"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "目标设备的一些分区 %(device)s 已经加载，并将在安装过程开始之前卸载。"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "安装Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "未知的文件系统。 您的设备也许需要重新格式化。"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "安装完成!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "不支持的文件系统：%s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "安装完成! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr "尝试安装下列设备时遇到未知的 GLib 异常：%(message)s"
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "安装完成。点击 确认 关闭程序。"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "无法挂载设备：%(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "正在安装引导程序..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "未找到挂载点"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "不可能升级设备 %(pretty_name)s，它并非通过 Tails 安装程序创建。您应该改用 %(action)s 来升级此设备上的 Tails。"
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB 创建失败！"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "输入 '%(device)s' 的卸载设备"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "请确认您在使用本程序前，已经解压整个 liveusb-creator zip 文件。"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "卸载 '%(device)s' 上的已挂载文件系统"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "请确认你的U盘已插入并已用 FAT 文件系统格式化"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "卸载 '%(device)s' 上的 '%(udi)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "卸载之后掛载已存在 %s "
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr " %(device)s 设备中无可用空间"
+msgid "Partitioning device %(device)s"
+msgstr "分区设备 %(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "未找到挂载点"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "更新系统分区属性 %(system_partition)s"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "设备可用空间不足。\n%dMB ISO + %dMB 覆盖 > %dMB 可用空间"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "不是支持的设备'%(device)s',请报告此故障。"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "分区为 FAT16 格式；限制层叠存储大小为 2G"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "无论如何正在尝试继续"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "分区为 FAT32；限制层叠存储大小为 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "正在验证文件系统..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "分区设备 %(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "无法改变卷标: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "持久存储器"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "正在安装引导程序..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "持久存储 (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr "无法找到“%s” COM32 模块"
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "请确认你的设备选项"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "正在移除 %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "刷新发布..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s 已经是可引导盘"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "发布已更新！"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "找不到分区"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "正在移除 %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "正在格式化 %(device)s 为 FAT32 格式"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "正在移除现存的 Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr "无法找到 syslinux 的 gptmbr.bin"
+
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr "读取从 %s 提取的 MBR"
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr "无法读取从 %(path)s 提取的 MBR"
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "正在重置 %s 的 MBR"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "选择 Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "正在设定 OLPC 启动文件..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "驱动器为环回 ，跳过 MBR 重设"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "目标设备的一些分区 %(device)s 已经加载，并将在安装过程开始之前卸载。"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "来源类型不支持 ISO 文件的 MD5 校验，正在跳过"
+msgid "Calculating the SHA1 of %s"
+msgstr "正在计算 %s 的 SHA1 校验值"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "正在同步硬盘中的数据..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "目前设备"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "检测设备时出错"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "设备“%(pretty_name)s”太小，不足以安装 Tails（需要至少 %(size)s GB 的空间）。"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "无法找到任何支持的设备。"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "选中文件不可读。请修改其许可或选择其他文件。"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "请确认你的U盘已插入并已用 FAT 文件系统格式化"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "执行以下指令时出错:‘%(command)s’。\n更详细的错误日志已写入‘%(filename)s’。"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "不支持的文件系统：%s\n请备份并用 FAT 文件系统格式化你的U盘"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "该按钮用于浏览之前下载的现有自生系统的 ISO 镜像。如果未选择，将自动下载一个发布版本。"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "无法调用 Win32_LogicalDisk 函数；win32com 查询未返回任何结果"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "该按钮将启动 LiveUSB 创建流程（以下事项可选）：下载发布版本（如果未选择现有版本），提取 ISO 至 U 盘，创建持久覆盖，安装引导装载程序。"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "找不到"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "这是用于安装自生系统的 U 盘。该设备必须使用 FAT 文件系统进行格式化。"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr "请确认您在使用本程序前，已经解压整个 tails-installer zip 文件。"
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "未知发行版：%s"
+
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "正在下载 %s..."
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "这是进度栏，用于显示 LiveUSB 创建流程的当前进度"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "错误：无法设定标签或获得你设备的UUID。 不能继续。"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "这是状态控制台，可显示所有消息。"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "安装完成! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "无论如何正在尝试继续"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr "Tails 安装失败！"
+
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "警告: 本工具需要以管理员权限运行。请右键单击本工具的快捷方式图标，在文件属性的兼容性选项卡中的选中\"以管理员身份运行此程序\"。"
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr "Tails 安装程序"
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "找到 USB 设备"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr "找不到适合安装 Tails 的设备"
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "无法改变卷标: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr "请插入容量大小至少为 %0.1f GB 的 U 盘或 SD 卡。"
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "无法更改权限 %(file)s：%(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "无法复制 %(infile)s 至 %(outfile)s : %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "未发现任何 U 盘"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "设备“%(pretty_name)s”太小，不足以安装 Tails（需要至少 %(size)s GB 的空间）。"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "无法找到任何支持的设备。"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr "通过克隆安装"
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "找不到分区"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "“从 ISO 安装”"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "无法调用 Win32_LogicalDisk 函数；win32com 查询未返回任何结果"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "不可能升级设备 %(pretty_name)s，它并非通过 Tails 安装程序创建。您应该改用 %(action)s 来升级此设备上的 Tails。"
+
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr "安装 Tails 时发生错误"
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "刷新发布..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "发布已更新！"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "安装完成!"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr "安装完成。"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "无法挂载设备"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "无法挂载设备：%(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "请确认你的设备选项"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "无法从之前的 LiveOS 中删除目录：%(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "您将在%(size)s %(vendor)s %(model)s 磁盘 (%(device)s)安装Tails。在您选择的磁盘上的所有数据将会丢失。是否继续？"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "无法从之前的 LiveOS 中删除文件：%(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "您正在升级 %(parent_size)s %(vendor)s %(model)s 设备 (%(device)s) 上的Tails.任何在此磁盘上的持久存储区将会保持不变。是否继续？"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "下载完成！"
+
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "下载失败！"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "你可以重试续传你的下载"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "无法重置 MBR 。 您可能未安装‘syslinux’软件包。"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "选中文件不可读。请修改其许可或选择其他文件。"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "无法使用所选文件。您可以将文件移动到磁盘根目录后再试(例如 C:\\)"
-#: ../liveusb/creator.py:723
-#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "无法向 %(device)s 中写入，正在跳过。"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "未知的 ISO，正在跳过校验值验证"
-
-#: ../liveusb/creator.py:810
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "尝试挂载设备时发生未知 dbus 异常: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s 已选取"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "未知的文件系统。 您的设备也许需要重新格式化。"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr "在 ISO 镜像里找不到 LiveOS"
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "未知发行版：%s"
+msgid "Could not guess underlying block device: %s"
+msgstr "无法猜测底层块设备：%s"
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "卸载 '%(device)s' 上的 '%(udi)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr "执行 %s 时发生错误。\n%s\n%s"
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "卸载 '%(device)s' 上的已挂载文件系统"
+msgid "'%s' does not exist"
+msgstr "“%s” 不存在"
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "不是支持的设备'%(device)s',请报告此故障。"
+msgid "'%s' is not a directory"
+msgstr "“%s” 不是目录"
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "不支持的文件系统：%s"
+msgid "Skipping '%(filename)s'"
+msgstr "跳过 “%(filename)s”"
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "不支持的文件系统：%s\n请备份并用 FAT 文件系统格式化你的U盘"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr "执行 %s 时发生错误。%s%s"
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "更新系统分区属性 %(system_partition)s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr "无法打开设备的写入模式。"
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "升级\n通过克隆"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr "使用现有的 Live 系统 ISO："
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr "选择一个要下载的发行版："
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr "目标设备："
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "安装Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "升级\n从 ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr "运行 Tails 安装程序之前您需要从 Tails 网站 <a href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a> 下载 ISO 镜像。"
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "使用现有的自生系统 ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr "安装"
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "正在验证 ISO MD5 校验值"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr "在新 U 盘上安装 Tails。"
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "正在验证 LiveCD 映像的 SHA1 校验值..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr "您用于安装的 U 盘已被格式化，清除了所有数据。"
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "正在验证 LiveCD 映像的 SHA256 校验值..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr "升级"
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "正在验证文件系统..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr "升级 Tails U盘 到 ISO 镜像的版本。"
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "警告：创建一个新的持久层叠文件，将删除您现存的这个。"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "警告: 本工具需要以管理员权限运行。请右键单击本工具的快捷方式图标，在文件属性的兼容性选项卡中的选中\"以管理员身份运行此程序\"。"
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr "需要帮助？查看<a href=\"https://tails.boum.org/doc/first_steps/installation/\">文档</a>"
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "写入设备，写入速度 %(speed)d MB/s"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr "通过克隆安装"
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "您将在%(size)s %(vendor)s %(model)s 磁盘 (%(device)s)安装Tails。在您选择的磁盘上的所有数据将会丢失。是否继续？"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "您正在升级 %(parent_size)s %(vendor)s %(model)s 设备 (%(device)s) 上的Tails.任何在此磁盘上的持久存储区将会保持不变。是否继续？"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr "通过克隆升级"
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "您正在使用旧版的 syslinux-extlinux ，它不支持 ext4 文件系统"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr "升级其他 Tails U盘 到您正在使用的 Tails 版本"
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "你可以重试续传你的下载"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr "从 ISO 升级"
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "你必须使用root权限来运行本程序"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "或"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr "需要帮助？查看<a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">文档</a>"
diff --git a/zh_HK/zh_HK.po b/zh_HK/zh_HK.po
index 0d83506..d46764a 100644
--- a/zh_HK/zh_HK.po
+++ b/zh_HK/zh_HK.po
@@ -4,9 +4,9 @@
#
# Translators:
# brendanyan <yan.brendan at gmail.com>, 2014
-# CasperLi_HK <casper.hk at hotmail.com>, 2013
+# Casper Li <casper.hk at hotmail.com>, 2013
# 大圈洋蔥, 2016
-# CasperLi_HK <casper.hk at hotmail.com>, 2013
+# Casper Li <casper.hk at hotmail.com>, 2013
# ronnietse <tseronnie at ymail.com>, 2014
# ronnietse <tseronnie at ymail.com>, 2014
# brendanyan <yan.brendan at gmail.com>, 2014
@@ -16,9 +16,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-04-17 07:49+0000\n"
-"Last-Translator: 大圈洋蔥\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Chinese (Hong Kong) (http://www.transifex.com/otf/torproject/language/zh_HK/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -26,591 +26,551 @@ msgstr ""
"Language: zh_HK\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "「複製並安裝」"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "你須以root身份執行此應用程式"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "「從ISO文件安裝」"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "正在解壓縮即時映像檔到目標設備…"
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s安裝程式"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "以每秒%(speed)d MB嘅速度寫入裝置"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "已選取%(filename)s"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "設定OLPC開機檔案…"
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "執行下列指令時發生錯誤：%(command)s。\n詳細嘅錯誤記錄已寫入到%(filename)s。"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "驗證LiveCD映像檔嘅SHA1總和碼…"
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s已可開機"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "驗證LiveCD映像檔嘅SHA256總和碼…"
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">需要協助？請閱讀<a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">文件</span></a>。</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由複製正在使用嘅Tails系統嚟將Tails安裝到其他USB磁碟。</li>\n\n<li>該USB磁碟將被格式化，且全部儲存喺佢度嘅資料都會消失。</li>\n\n<li>正在使用嘅Tails USB中嘅加密保留磁區唔會被複製</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由正在使用嘅Tails系統嚟將其他USB磁碟中嘅Tails進行升級。</li>\n\n<li>目的地USB磁碟上其全部儲存資料都會被保留。</li>\n\n<li>而你正在使用嘅Tails USB嘅資料唔會複製到目的地USB磁碟。</li>\n\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由ISO檔嚟將其他USB磁碟中嘅Tails進行升級。</li>\n\n<li>目的地USB磁碟上嘅全部儲存資料都會被保留。</li>\n\n<li>而你正在使用嘅Tails USB上嘅資料唔會複製到目的地USB磁碟。</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "瀏覽"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "藉由喺你嘅USB磁碟分配額外空間畀持續覆蓋，你將能夠喺即時作業系統中存放資料同作永久修改。否則，你將無法喺重新開機後儲存資料。"
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "計算%s嘅SHA1"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "錯誤：你Live CD嘅SHA1無效。你可使用 --noverify 參數嚟執行此程式以略過此驗證檢查。"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "搵唔到"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "未知的ISO，略過總和碼驗證"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "搵唔到裝置%s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "裝置上嘅可用空間唔夠。\n%dMB「ISO」加上%dMB「覆蓋」大於%dMB可用空間"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "建立%sMB持續覆蓋"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "裝置未掛接，所以我哋無法確定可用空間。"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "下載%(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "下載完成！"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "無法複製%(infile)s到%(outfile)s：%(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "下載失敗："
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "移除現存嘅Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "下載%s…"
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "磁碟迴送，略過MBR重設"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "無法以chmod更改權限%(file)s：%(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "進入未掛接裝置「%(device)s」"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "探測裝置失敗"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "錯誤：無法設定標籤或取得你設備嘅UUID。無法繼續。"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "錯誤：你Live CD嘅SHA1無效。你可使用 --noverify 參數嚟執行此程式以略過此驗證檢查。"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "正在解壓縮即時映像檔到目標設備…"
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "無法由先前嘅LiveOS移除檔案：%(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "將%(device)s格式化成Fat32格式"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "通過ISO MD5總和碼驗證"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "無法由先前嘅LiveOS移除目錄：%(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5總和碼驗證失敗"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "搵唔到裝置%s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "如果未選取一個咿㗎嘅Live ISO，將會幫你下載所選版本。"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "無法寫入%(device)s，略過。"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "通過複製文件\n安裝"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "目標裝置%(device)s中一啲分割區已掛接。佢哋將於開始安裝過程前被卸載。"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "安裝Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "未知嘅檔案系統。你嘅裝置可能須重新格式化。"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "安裝完成！"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "唔支援嘅檔案系統：%s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "安裝完成！(%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "安裝已完成，撳﹝確定﹞關閉此程式。"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "無法掛接裝置：%(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "安裝Bootloader…"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "搵唔到掛接點"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "由於裝置%(pretty_name)s唔係由Tails安裝程式所建立，所以唔能夠進行升級。須使用%(action)s以升級呢個裝置上嘅Tails。"
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB建立失敗！"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "進入未掛接裝置「%(device)s」"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "執行此程式前請先解壓縮整個libusb-creator zip檔案。"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "正在卸載掛接係%(device)s上嘅檔案系統"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "請確認USB磁碟已插入，並使用FAT進行格式化"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "正在卸載%(device)s嘅%(udi)s"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "取消掛接後%s掛接仍存在"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "裝置%(device)s上嘅可用空間唔夠。"
+msgid "Partitioning device %(device)s"
+msgstr "分割區裝置%(device)s"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "搵唔到掛接點"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "升級系統分割區%(system_partition)s嘅屬性"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "裝置上嘅可用空間唔夠。\n%dMB「ISO」加上%dMB「覆蓋」大於%dMB可用空間"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "唔支援嘅裝置%(device)s，請報告錯誤。"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "分割區為FAT16；覆蓋限制大小為2GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "無論如何仍嘗試繼續。"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "分割區為FAT32; 限制重疊大小為4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "正在驗證檔案系統…"
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "分割區裝置%(device)s"
+msgid "Unable to change volume label: %(message)s"
+msgstr "無法更改磁碟區標籤：%(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "持續性儲存"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "安裝Bootloader…"
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "持續性儲存(0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "請確認選取嘅裝置"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "移除%(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "正在重新整理版本…"
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s已可開機"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "版本已更新！"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "搵唔到分割區"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "移除%(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "將%(device)s格式化成Fat32格式"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "移除現存嘅Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "重設%s的MBR主開機紀錄"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "選取Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "設定OLPC開機檔案…"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "磁碟迴送，略過MBR重設"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "目標裝置%(device)s中一啲分割區已掛接。佢哋將於開始安裝過程前被卸載。"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "來源類型唔支援ISO MD5總和碼驗證，略過"
+msgid "Calculating the SHA1 of %s"
+msgstr "計算%s嘅SHA1"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "同步磁碟上嘅資料…"
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "目標裝置"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "探測裝置失敗"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "「%(pretty_name)s」設備嘅容量太小，無法安裝Tails(至少需要%(size)s GB嘅空間)。"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "搵唔到任何支援嘅裝置"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "所選檔案無法讀取。請修正其權限或選取另一檔案。"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "請確認USB磁碟已插入，並使用FAT進行格式化"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "執行下列指令時發生錯誤：%(command)s。\n詳細嘅錯誤記錄已寫入到%(filename)s。"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "唔支援嘅檔案系統：%s\n請進行備份並使用FAT嚟格式化USB磁碟。"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "此按鈕可瀏覽先前已下載嘅Live系統ISO。如果未選取嘅話，將會自動為你下載一個版本。"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "無法取得Win32_LogicalDisk；win32com查詢未傳回任何結果"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "此按鈕將開始LiveUSB建立過程。即係選擇下載一個版本(如果未選取一個現有版本嘅話)，將ISO解壓縮到USB裝置，建立永久覆蓋，然後安裝Bootloader。"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "搵唔到"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "呢個係你想安裝即時系統嘅USB磁碟。此裝置須以FAT嚟格式化。"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "未知嘅發行版本：%s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "下載%s…"
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "呢個進度軸將會顯示LiveUSB建立過程還需時多久"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "錯誤：無法設定標籤或取得你設備嘅UUID。無法繼續。"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "呢個係狀態主控台，全部訊息都會寫入呢度。"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "安裝完成！(%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "無論如何仍嘗試繼續。"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "搵到USB裝置"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "警告：此工具需以系統管理員身份執行。請對圖示撳滑鼠右鍵後點選內容，喺相容性分頁下，選取「以系統管理員身份執行此程式」。"
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "無法更改磁碟區標籤：%(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "無法以chmod更改權限%(file)s：%(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "無法複製%(infile)s到%(outfile)s：%(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "搵唔到USB裝置"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "「%(pretty_name)s」設備嘅容量太小，無法安裝Tails(至少需要%(size)s GB嘅空間)。"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "搵唔到任何支援嘅裝置"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "搵唔到分割區"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "「從ISO文件安裝」"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "無法取得Win32_LogicalDisk；win32com查詢未傳回任何結果"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "由於裝置%(pretty_name)s唔係由Tails安裝程式所建立，所以唔能夠進行升級。須使用%(action)s以升級呢個裝置上嘅Tails。"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "正在重新整理版本…"
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "版本已更新！"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "安裝完成！"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "無法掛接裝置"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "無法掛接裝置：%(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "請確認選取嘅裝置"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "無法由先前嘅LiveOS移除目錄：%(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "即將安裝Tails於%(size)s %(vendor)s %(model)s裝置(%(device)s)。全部喺所選裝置上嘅資料將會消失。繼續？"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "無法由先前嘅LiveOS移除檔案：%(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "即將升級%(parent_size)s %(vendor)s %(model)s裝置(%(device)s)嘅Tails。此裝置上嘅持續磁碟區將保持不變。繼續？"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "下載完成！"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "下載失敗："
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "可嘗試回復下載"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "無法重設MBR。你可能無安裝Syslinux套件。"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "所選檔案無法讀取。請修正其權限或選取另一檔案。"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "無法使用所選檔案。如你將ISO移動到磁碟根目錄下(例如：C:\\)，你可能會好運一啲"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "無法寫入%(device)s，略過。"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "未知的ISO，略過總和碼驗證"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "掛接裝置時發生未知嘅dbus例外：%(message)s"
+msgid "%(filename)s selected"
+msgstr "已選取%(filename)s"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "未知嘅檔案系統。你嘅裝置可能須重新格式化。"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "未知嘅發行版本：%s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "正在卸載%(device)s嘅%(udi)s"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "正在卸載掛接係%(device)s上嘅檔案系統"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "唔支援嘅裝置%(device)s，請報告錯誤。"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "唔支援嘅檔案系統：%s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "唔支援嘅檔案系統：%s\n請進行備份並使用FAT嚟格式化USB磁碟。"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "升級系統分割區%(system_partition)s嘅屬性"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "通過複製文件\n升級"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "安裝Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "從ISO\n升級"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "使用現存嘅Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "驗證ISO MD5總和碼"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "驗證LiveCD映像檔嘅SHA1總和碼…"
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "驗證LiveCD映像檔嘅SHA256總和碼…"
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "正在驗證檔案系統…"
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "警告：建立新嘅持續覆蓋將刪除你咿㗎嘅持續覆蓋。"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "警告：此工具需以系統管理員身份執行。請對圖示撳滑鼠右鍵後點選內容，喺相容性分頁下，選取「以系統管理員身份執行此程式」。"
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "以每秒%(speed)d MB嘅速度寫入裝置"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "即將安裝Tails於%(size)s %(vendor)s %(model)s裝置(%(device)s)。全部喺所選裝置上嘅資料將會消失。繼續？"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "即將升級%(parent_size)s %(vendor)s %(model)s裝置(%(device)s)嘅Tails。此裝置上嘅持續磁碟區將保持不變。繼續？"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "你正使用舊版syslinux-extlinux，唔支援ext4檔案系統"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "可嘗試回復下載"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "你須以root身份執行此應用程式"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "或"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/zh_TW/zh_TW.po b/zh_TW/zh_TW.po
index d2710a7..388e54c 100644
--- a/zh_TW/zh_TW.po
+++ b/zh_TW/zh_TW.po
@@ -5,7 +5,7 @@
# Translators:
# Agustín Wu <losangwuyts at gmail.com>, 2016
# BrLi <rainman59118 at gmail.com>, 2015
-# cges30901 <cges30901 at gmail.com>, 2014
+# Hsiu-Ming Chang <cges30901 at gmail.com>, 2014
# Chinrur Yang <chinrur at gmail.com>, 2013
# danfong <danfong.hsieh at gmail.com>, 2014
# David Chen <david203812 at gmail.com>, 2015
@@ -21,9 +21,9 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2016-11-27 14:02+0000\n"
-"Last-Translator: Agustín Wu <losangwuyts at gmail.com>\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
+"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Chinese (Taiwan) (http://www.transifex.com/otf/torproject/language/zh_TW/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -31,591 +31,551 @@ msgstr ""
"Language: zh_TW\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
-msgstr "「複製並安裝」"
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
+msgstr "你必須以 root 身份執行此應用程式"
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
-msgstr "「從ISO文件安裝」"
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
+msgstr "正在解壓縮即時映像檔到目標設備上..."
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
-msgstr "%(distribution)s 安裝程式"
+msgid "Wrote to device at %(speed)d MB/sec"
+msgstr "以 %(speed)d MB/秒 的速度寫入裝置"
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
-msgstr "%(filename)s 已選取"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
+msgstr "設定 OLPC 開機檔案..."
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
-msgstr "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
+msgstr "執行下列命令時發生問題：`%(command)s`。\n更詳細的錯誤記錄已寫入到'%(filename)s'。"
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
-msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
+msgstr "正在驗證 LiveCD 映像檔的 SHA1 總和檢查碼..."
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
-msgstr "%s 已經可開機"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
+msgstr "正在驗證 LiveCD 映像檔的 SHA256 總和檢查碼..."
-#: ../liveusb/launcher_ui.py:160
-msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
-msgstr "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\np, li { white-space: pre-wrap; }\n</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">需要幫助？請閱讀 <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">文檔</span></a>.</p></body></html>"
-
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由複製您正在使用的 Tails 系統來將 Tails 安裝至別的 USB 隨身碟中。</li>\n\n<li>該 USB 隨身碟將被格式化，且所有儲存於其上的資料都將遺失。</li>\n\n<li>您所正在使用的 Tails USB 中的加密保留磁區不會被複製</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:157
+#: ../tails_installer/creator.py:341
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由您正在使用的 Tails 系統來把別的 USB 隨身碟中的 Tails 進行升級。</li>\n\n<li>目的地 USB 隨身碟上其所有所儲存資料都會被保留。</li>\n\n<li>而您所正在使用的 Tails USB 的資料是不會複製到目的地 USB 隨身碟上。</li>\n\n</ul>"
-
-#: ../liveusb/launcher_ui.py:159
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
-msgstr "<ul>\n<li>藉由ISO檔來把別的 USB 隨身碟中的 Tails 進行升級。</li>\n\n<li>目的地 USB 隨身碟上其所有所儲存資料都會被保留。</li>\n\n<li>而您所正在使用的 Tails USB 的資料是不會複製到目的地 USB 隨身碟上。</li>\n\n</ul>"
-
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
-msgstr "Alt+B"
-
-#: ../liveusb/dialog.py:160
-msgid "Browse"
-msgstr "瀏覽"
-
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
-msgstr "藉由在您的 USB 隨身碟配置額外空間給永久覆蓋，您將能夠在即時作業系統中存放資料和作永久修改。否則，您將無法在重新開機後儲存資料。"
-
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
-#, python-format
-msgid "Calculating the SHA1 of %s"
-msgstr "正在計算 %s 的 SHA1 雜湊碼"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
+msgstr "錯誤：您 Live CD 的 SHA1 雜湊碼無效。您可以使用 --noverify 參數來略過驗證檢查程序並直接執行此程式。"
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
-msgstr "找不到"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
+msgstr "未知的 ISO 檔，略過總和檢查碼驗證程序"
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:358
#, python-format
-msgid "Cannot find device %s"
-msgstr "找不到裝置 %s"
+msgid ""
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
+msgstr "裝置上的可用空間不足。\n%dMB ISO + %dMB覆蓋 > %dMB可用空間"
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:365
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "建立 %sMB 永久覆蓋"
-#: ../liveusb/gui.py:582
-msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
-msgstr "裝置尚未掛載，所以我們無法確定可用空間容量。"
-
-#: ../liveusb/dialog.py:164
+#: ../tails_installer/creator.py:426
#, python-format
-msgid "Download %(distribution)s"
-msgstr "下載 %(distribution)s"
-
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
-msgstr "下載完成！"
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+msgstr "無法複製 %(infile)s 到 %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
-msgstr "下載失敗："
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
+msgstr "正在移除現有的 Live OS"
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Downloading %s..."
-msgstr "正在下載 %s..."
-
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
-msgstr "磁碟回送，略過 MBR 重設"
+msgid "Unable to chmod %(file)s: %(message)s"
+msgstr "無法以 chmod 變更權限 %(file)s: %(message)s"
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:453
#, python-format
-msgid "Entering unmount_device for '%(device)s'"
-msgstr "進入未掛載裝置 '%(device)s'"
-
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
-msgstr "探測裝置失敗"
-
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
-msgstr "錯誤：無法設定標籤或取得裝置的 UUID，無法繼續。"
-
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
-msgstr "錯誤：您 Live CD 的 SHA1 雜湊碼無效。您可以使用 --noverify 參數來略過驗證檢查程序並直接執行此程式。"
-
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
-msgstr "正在解壓縮即時映像檔到目標設備上..."
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr "無法從先前的 LiveOS 移除檔案: %(message)s"
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:465
#, python-format
-msgid "Formatting %(device)s as FAT32"
-msgstr "正將 %(device)s 格式化成 FAT32 格式"
-
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
-msgstr "ISO MD5 總和檢查碼成功"
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
+msgstr "無法從先前的 LiveOS 移除目錄: %(message)s"
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
-msgstr "ISO MD5 總和檢查碼驗證失敗"
+#: ../tails_installer/creator.py:513
+#, python-format
+msgid "Cannot find device %s"
+msgstr "找不到裝置 %s"
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
-msgstr "如果您沒有選擇一個現有的 Live ISO，將會替您下載所選的版本。"
+#: ../tails_installer/creator.py:673
+#, python-format
+msgid "Unable to write on %(device)s, skipping."
+msgstr "無法寫入 %(device)s，略過。"
-#: ../liveusb/launcher_ui.py:154
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Install\n"
-"by cloning"
-msgstr "通過複製文件\n安裝"
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
+msgstr "目標裝置 %(device)s 中有些分割區已經被掛載。它們將在開始安裝前被自動卸載。"
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
-msgstr "安裝 Tails"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
+msgstr "未知的檔案系統。您的裝置可能需要重新格式化。"
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
-msgstr "安裝完成！"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
+msgstr "不支援的檔案系統：%s"
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:755
#, python-format
-msgid "Installation complete! (%s)"
-msgstr "安裝完成! (%s)"
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
+msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
-msgstr "安裝已完成，按下「確定」關閉此程式。"
+#: ../tails_installer/creator.py:759
+#, python-format
+msgid "Unable to mount device: %(message)s"
+msgstr "無法掛載裝置: %(message)s"
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
-msgstr "正在安裝 bootloader..."
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
+msgstr "找不到掛載點"
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:775
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr "由於裝置 %(pretty_name)s 不是由 Tails 安裝程式所創建，故不能進行升級。應使用 %(action)s 去升級此裝置上的 Tails 。"
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
-msgstr "LiveUSB 建立失敗！"
+msgid "Entering unmount_device for '%(device)s'"
+msgstr "進入未掛載裝置 '%(device)s'"
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
-msgstr "執行此程式前請先解壓縮整個 libusb-creator zip 檔案。"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
+msgstr "正在卸載已掛載於 '%(device)s' 上的檔案系統"
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr "請確認您的 USB 磁碟已插入，並且已被格式化成 FAT 檔案系統"
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgstr "正在卸載 '%(udi)s' 在 '%(device)s'"
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:799
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "取消掛載後 %s 掛載仍存在"
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:812
#, python-format
-msgid "No free space on device %(device)s"
-msgstr "裝置 %(device)s 上的可用空間不足。"
+msgid "Partitioning device %(device)s"
+msgstr "正在為 %(device)s 建立分割區"
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
-msgstr "找不到掛載點"
+#: ../tails_installer/creator.py:890
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "正在更新系統分割區 %(system_partition)s 的屬性"
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:944
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr "裝置上的可用空間不足。\n%dMB ISO + %dMB覆蓋 > %dMB可用空間"
+msgid "Unsupported device '%(device)s', please report a bug."
+msgstr "不支援的裝置 '%(device)s'，請回報此錯誤。"
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
-msgstr "分割區為 FAT16 檔案系統；限制重疊區大小為 2 GB"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
+msgstr "無論如何仍嘗試繼續。"
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
-msgstr "分割區為 FAT32 檔案系統; 限制重疊區大小為 4G"
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
+msgstr "正在驗證檔案系統..."
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
+#: ../tails_installer/creator.py:980
#, python-format
-msgid "Partitioning device %(device)s"
-msgstr "正在為 %(device)s 建立分割區"
+msgid "Unable to change volume label: %(message)s"
+msgstr "無法變更磁碟區標籤: %(message)s"
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
-msgstr "永久性儲存裝置"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
+msgstr "正在安裝 bootloader..."
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
-msgstr "永久性儲存裝置 (0 MB)"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
+msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
-msgstr "請確認您所選取的裝置"
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
+#, python-format
+msgid "Removing %(file)s"
+msgstr "正在移除 %(file)s"
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
-msgstr "正在重新整理版本..."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
+msgstr "%s 已經可開機"
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
-msgstr "版本已更新！"
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
+msgstr "找不到分割區"
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid "Removing %(file)s"
-msgstr "正在移除 %(file)s"
+msgid "Formatting %(device)s as FAT32"
+msgstr "正將 %(device)s 格式化成 FAT32 格式"
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
-msgstr "正在移除現有的 Live OS"
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
+msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1251
+#, python-format
+msgid "Could not read the extracted MBR from %(path)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "重設 %s 的 MBR 主開機紀錄"
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
-msgstr "選取 Live ISO"
-
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
-msgstr "設定 OLPC 開機檔案..."
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
+msgstr "磁碟回送，略過 MBR 重設"
-#: ../liveusb/creator.py:742
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
-msgstr "目標裝置 %(device)s 中有些分割區已經被掛載。它們將在開始安裝前被自動卸載。"
-
-#: ../liveusb/creator.py:141
-msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
-msgstr "來源類型不支援 ISO MD5 總和檢查碼的驗證功能，略過"
+msgid "Calculating the SHA1 of %s"
+msgstr "正在計算 %s 的 SHA1 雜湊碼"
-#: ../liveusb/creator.py:1220
+#: ../tails_installer/creator.py:1299
msgid "Synchronizing data on disk..."
msgstr "正在同步磁碟上的資料..."
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
-msgstr "目標裝置"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
+msgstr "探測裝置失敗"
-#: ../liveusb/gui.py:438
-#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
-msgstr "“%(pretty_name)s”設備的容量太小，無法安裝Tails (至少需要 %(size)s GB 的空間)。"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
+msgstr "找不到任何有支援的裝置"
-#: ../liveusb/gui.py:792
+#: ../tails_installer/creator.py:1353
msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
-msgstr "所選取的檔案無法讀取，請修改該檔案之存取權限或選擇另一個檔案。"
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+msgstr "請確認您的 USB 磁碟已插入，並且已被格式化成 FAT 檔案系統"
-#: ../liveusb/creator.py:354
+#: ../tails_installer/creator.py:1356
#, python-format
msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
-msgstr "執行下列命令時發生問題：`%(command)s`。\n更詳細的錯誤記錄已寫入到'%(filename)s'。"
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
+msgstr "不支援的檔案系統：%s\n請將您的 USB 隨身碟內之資料進行備份，並將它格式化成 FAT 檔案系統。"
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/creator.py:1423
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
-msgstr "此按鈕讓您可以瀏覽先前已下載的 Live 系統之 ISO 檔，如果您沒有選取的話，程式將會自動為您下載一個版本。"
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+msgstr "無法取得 Win32_LogicalDisk；win32com 查詢沒有傳回任何結果"
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
-msgstr "此按鈕將啟動 LiveUSB 建立程序。這將會選擇性地下載一個版本 (如果您沒有選取任何現有版本的話)，再將 ISO 解壓縮到 USB 裝置，並建立永久性重疊區，然後會安裝系統之啟動載入程式。"
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
+msgstr "找不到"
-#: ../liveusb/dialog.py:165
+#: ../tails_installer/creator.py:1477
msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
-msgstr "這是您想安裝 Live 系統的 USB 隨身碟，它必須是已被格式化成 FAT 檔案系統之儲存裝置。"
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
+msgstr ""
+
+#: ../tails_installer/gui.py:69
+#, python-format
+msgid "Unknown release: %s"
+msgstr "未知的發行版本：%s"
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:73
+#, python-format
+msgid "Downloading %s..."
+msgstr "正在下載 %s..."
+
+#: ../tails_installer/gui.py:204
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr "這個進度列將會表示 LiveUSB 建立過程還需要多久"
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
+msgstr "錯誤：無法設定標籤或取得裝置的 UUID，無法繼續。"
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr "這是狀態主控台，所有訊息都會寫入到這裡。"
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
+msgstr "安裝完成! (%s)"
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
-msgstr "無論如何仍嘗試繼續。"
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
+msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
-msgstr "找到 USB 裝置"
+#: ../tails_installer/gui.py:353
+msgid ""
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
+msgstr "警告：此工具需以系統管理員身分執行。請對圖示按滑鼠右鍵後點選內容，在相容性頁籤下，勾選「以系統管理員身份執行此程式」方塊。"
+
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
+msgstr ""
-#: ../liveusb/creator.py:985
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
+msgstr ""
+
+#: ../tails_installer/gui.py:442
#, python-format
-msgid "Unable to change volume label: %(message)s"
-msgstr "無法變更磁碟區標籤: %(message)s"
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
+msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
+#: ../tails_installer/gui.py:474
#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
-msgstr "無法以 chmod 變更權限 %(file)s: %(message)s"
+msgid "%(size)s %(label)s"
+msgstr "%(size)s %(label)s"
-#: ../liveusb/creator.py:478
+#: ../tails_installer/gui.py:480
#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr "無法複製 %(infile)s 到 %(outfile)s: %(message)s"
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
-msgstr "找不到任何的 USB 裝置"
+#: ../tails_installer/gui.py:488
+#, python-format
+msgid ""
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
+msgstr "“%(pretty_name)s”設備的容量太小，無法安裝Tails (至少需要 %(size)s GB 的空間)。"
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
-msgstr "找不到任何有支援的裝置"
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
+msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
-msgstr "找不到分割區"
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
+msgstr "「從ISO文件安裝」"
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr "無法取得 Win32_LogicalDisk；win32com 查詢沒有傳回任何結果"
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
+msgstr "由於裝置 %(pretty_name)s 不是由 Tails 安裝程式所創建，故不能進行升級。應使用 %(action)s 去升級此裝置上的 Tails 。"
-#: ../liveusb/gui.py:691
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
+msgstr ""
+
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
+msgstr "正在重新整理版本..."
+
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
+msgstr "版本已更新！"
+
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
+msgstr "安裝完成！"
+
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
+msgstr ""
+
+#: ../tails_installer/gui.py:625
msgid "Unable to mount device"
msgstr "無法掛接裝置"
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
-msgstr "無法掛載裝置: %(message)s"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
+msgstr "請確認您所選取的裝置"
-#: ../liveusb/creator.py:517
+#: ../tails_installer/gui.py:633
#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr "無法從先前的 LiveOS 移除目錄: %(message)s"
+msgid ""
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
+msgstr "您即將在 %(size)s %(vendor)s %(model)s 裝置 (%(device)s)上安裝 Tails ，被選取裝置上的資料都將會消失，確定要繼續嗎？"
-#: ../liveusb/creator.py:505
+#: ../tails_installer/gui.py:650
#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr "無法從先前的 LiveOS 移除檔案: %(message)s"
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
+msgstr "您即將升級位於 %(parent_size)s %(vendor)s %(model)s 裝置 (%(device)s)上的 Tails。在此裝置上的永久性磁碟區將保持不變，確定要繼續嗎？"
+
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
+msgstr "下載完成！"
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
+msgstr "下載失敗："
+
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
+msgstr "您可再次嘗試來繼續您的下載"
+
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
-msgstr "無法重設 MBR。您可能沒有安裝「syslinux」套件。"
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
+msgstr "所選取的檔案無法讀取，請修改該檔案之存取權限或選擇另一個檔案。"
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "無法使用所選取的檔案，或許您可以嘗試將 ISO 檔移動到磁碟根目錄下(例如：C：\\)"
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
-msgstr "無法寫入 %(device)s，略過。"
-
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
-msgstr "未知的 ISO 檔，略過總和檢查碼驗證程序"
-
-#: ../liveusb/creator.py:810
-#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
-msgstr "掛載裝置時發生未知的 dbus 例外: %(message)s"
+msgid "%(filename)s selected"
+msgstr "%(filename)s 已選取"
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr "未知的檔案系統。您的裝置可能需要重新格式化。"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
+msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown release: %s"
-msgstr "未知的發行版本：%s"
+msgid "Could not guess underlying block device: %s"
+msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:49
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr "正在卸載 '%(udi)s' 在 '%(device)s'"
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr "正在卸載已掛載於 '%(device)s' 上的檔案系統"
+msgid "'%s' does not exist"
+msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
-msgstr "不支援的裝置 '%(device)s'，請回報此錯誤。"
+msgid "'%s' is not a directory"
+msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unsupported filesystem: %s"
-msgstr "不支援的檔案系統：%s"
+msgid "Skipping '%(filename)s'"
+msgstr ""
-#: ../liveusb/creator.py:1287
+#: ../tails_installer/utils.py:44
#, python-format
msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
-msgstr "不支援的檔案系統：%s\n請將您的 USB 隨身碟內之資料進行備份，並將它格式化成 FAT 檔案系統。"
+"There was a problem executing `%s`.%s\n"
+"%s"
+msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
-msgstr "正在更新系統分割區 %(system_partition)s 的屬性"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
+msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
-msgstr "通過複製文件\n升級"
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
+msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
+msgstr "安裝 Tails"
+
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
-msgstr "從ISO\n升級"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
+msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
-msgstr "使用現有的 Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
+msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
-msgstr "正在驗證 ISO 檔之 MD5 總和檢查碼"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
+msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr "正在驗證 LiveCD 映像檔的 SHA1 總和檢查碼..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
+msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr "正在驗證 LiveCD 映像檔的 SHA256 總和檢查碼..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
+msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
-msgstr "正在驗證檔案系統..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
-msgstr "警告：現有的永久性重疊區將會被新建立的取代。"
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
+msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
-msgstr "警告：此工具需以系統管理員身分執行。請對圖示按滑鼠右鍵後點選內容，在相容性頁籤下，勾選「以系統管理員身份執行此程式」方塊。"
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
+msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
-msgstr "以 %(speed)d MB/秒 的速度寫入裝置"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
+msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
-msgstr "您即將在 %(size)s %(vendor)s %(model)s 裝置 (%(device)s)上安裝 Tails ，被選取裝置上的資料都將會消失，確定要繼續嗎？"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
+msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
-msgstr "您即將升級位於 %(parent_size)s %(vendor)s %(model)s 裝置 (%(device)s)上的 Tails。在此裝置上的永久性磁碟區將保持不變，確定要繼續嗎？"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
+msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
-msgstr "您正使用舊版的 syslinux-extlinux，不支援 ext4 檔案系統"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
+msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
-msgstr "您可再次嘗試來繼續您的下載"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
+msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
-msgstr "你必須以 root 身份執行此應用程式"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
+msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
-msgstr "或"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
+msgstr ""
diff --git a/zu/zu.po b/zu/zu.po
index a0e66de..dab7273 100644
--- a/zu/zu.po
+++ b/zu/zu.po
@@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-11-02 21:23+0100\n"
-"PO-Revision-Date: 2015-11-03 09:24+0000\n"
+"POT-Creation-Date: 2017-04-06 20:38+0200\n"
+"PO-Revision-Date: 2017-06-01 01:27+0000\n"
"Last-Translator: carolyn <carolyn at anhalt.org>\n"
"Language-Team: Zulu (http://www.transifex.com/otf/torproject/language/zu/)\n"
"MIME-Version: 1.0\n"
@@ -17,591 +17,551 @@ msgstr ""
"Language: zu\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: ../liveusb/gui.py:451
-msgid "\"Clone & Install\""
+#: ../tails_installer/creator.py:100
+msgid "You must run this application as root"
msgstr ""
-#: ../liveusb/gui.py:453
-msgid "\"Install from ISO\""
+#: ../tails_installer/creator.py:146
+msgid "Extracting live image to the target device..."
msgstr ""
-#: ../liveusb/dialog.py:157 ../liveusb/launcher_ui.py:153
+#: ../tails_installer/creator.py:153
#, python-format
-msgid "%(distribution)s Installer"
+msgid "Wrote to device at %(speed)d MB/sec"
msgstr ""
-#: ../liveusb/gui.py:804
-#, python-format
-msgid "%(filename)s selected"
+#: ../tails_installer/creator.py:183
+msgid "Setting up OLPC boot file..."
msgstr ""
-#: ../liveusb/gui.py:424
+#: ../tails_installer/creator.py:302
#, python-format
-msgid "%(size)s %(label)s"
+msgid ""
+"There was a problem executing the following command: `%(command)s`.\n"
+"A more detailed error log has been written to '%(filename)s'."
msgstr ""
-#: ../liveusb/gui.py:430
-#, python-format
-msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
+#: ../tails_installer/creator.py:321
+msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/creator.py:1097
-#, python-format
-msgid "%s already bootable"
+#: ../tails_installer/creator.py:325
+msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr ""
-#: ../liveusb/launcher_ui.py:160
+#: ../tails_installer/creator.py:341
msgid ""
-"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
-"<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
-"p, li { white-space: pre-wrap; }\n"
-"</style></head><body style=\" font-family:'Cantarell'; font-size:11pt; font-weight:400; font-style:normal;\">\n"
-"<p align=\"center\" style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\">Need help? Read the <a href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\"><span style=\" text-decoration: underline; color:#0000ff;\">documentation</span></a>.</p></body></html>"
+"Error: The SHA1 of your Live CD is invalid. You can run this program with "
+"the --noverify argument to bypass this verification check."
msgstr ""
-#: ../liveusb/launcher_ui.py:155
-msgid ""
-"<ul>\n"
-"<li>Install Tails on another USB stick by copying the Tails system that you are currently using..</li>\n"
-"\n"
-"<li>The USB stick that you install on is formatted and all data is lost.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+#: ../tails_installer/creator.py:347
+msgid "Unknown ISO, skipping checksum verification"
msgstr ""
-#: ../liveusb/launcher_ui.py:157
-msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the same version of Tails that you are currently using.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"\n"
-"</ul>"
-msgstr ""
-
-#: ../liveusb/launcher_ui.py:159
+#: ../tails_installer/creator.py:358
+#, python-format
msgid ""
-"<ul>\n"
-"<li>Upgrade another Tails USB stick to the version of an ISO image.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you upgrade is preserved.</li>\n"
-"\n"
-"<li>The encrypted persistent storage of the Tails USB stick that you are currently using is not copied.</li>\n"
-"\n"
-"</ul>"
+"Not enough free space on device.\n"
+"%dMB ISO + %dMB overlay > %dMB free space"
msgstr ""
-#: ../liveusb/dialog.py:161
-msgid "Alt+B"
+#: ../tails_installer/creator.py:365
+#, python-format
+msgid "Creating %sMB persistent overlay"
msgstr ""
-#: ../liveusb/dialog.py:160
-msgid "Browse"
+#: ../tails_installer/creator.py:426
+#, python-format
+msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:167
-msgid ""
-"By allocating extra space on your USB stick for a persistent overlay, you "
-"will be able to store data and make permanent modifications to your live "
-"operating system. Without it, you will not be able to save data that will "
-"persist after a reboot."
+#: ../tails_installer/creator.py:440
+msgid "Removing existing Live OS"
msgstr ""
-#: ../liveusb/creator.py:1196 ../liveusb/creator.py:1459
+#: ../tails_installer/creator.py:449 ../tails_installer/creator.py:460
#, python-format
-msgid "Calculating the SHA1 of %s"
+msgid "Unable to chmod %(file)s: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1407
-msgid "Cannot find"
+#: ../tails_installer/creator.py:453
+#, python-format
+msgid "Unable to remove file from previous LiveOS: %(message)s"
+msgstr ""
+
+#: ../tails_installer/creator.py:465
+#, python-format
+msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:560
+#: ../tails_installer/creator.py:513
#, python-format
msgid "Cannot find device %s"
msgstr ""
-#: ../liveusb/creator.py:417
+#: ../tails_installer/creator.py:673
#, python-format
-msgid "Creating %sMB persistent overlay"
+msgid "Unable to write on %(device)s, skipping."
msgstr ""
-#: ../liveusb/gui.py:582
+#: ../tails_installer/creator.py:692
+#, python-format
msgid ""
-"Device is not yet mounted, so we cannot determine the amount of free space."
+"Some partitions of the target device %(device)s are mounted. They will be "
+"unmounted before starting the installation process."
msgstr ""
-#: ../liveusb/dialog.py:164
-#, python-format
-msgid "Download %(distribution)s"
+#: ../tails_installer/creator.py:735 ../tails_installer/creator.py:959
+msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr ""
-#: ../liveusb/gui.py:778
-msgid "Download complete!"
+#: ../tails_installer/creator.py:738 ../tails_installer/creator.py:962
+#, python-format
+msgid "Unsupported filesystem: %s"
msgstr ""
-#: ../liveusb/gui.py:782
-msgid "Download failed: "
+#: ../tails_installer/creator.py:755
+#, python-format
+msgid "Unknown GLib exception while trying to mount device: %(message)s"
msgstr ""
-#: ../liveusb/gui.py:89
+#: ../tails_installer/creator.py:759
#, python-format
-msgid "Downloading %s..."
+msgid "Unable to mount device: %(message)s"
msgstr ""
-#: ../liveusb/creator.py:1192
-msgid "Drive is a loopback, skipping MBR reset"
+#: ../tails_installer/creator.py:764
+msgid "No mount points found"
msgstr ""
-#: ../liveusb/creator.py:837
+#: ../tails_installer/creator.py:775
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:1272
-msgid "Error probing device"
+#: ../tails_installer/creator.py:785
+#, python-format
+msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr ""
-#: ../liveusb/gui.py:213
-msgid ""
-"Error: Cannot set the label or obtain the UUID of your device. Unable to "
-"continue."
+#: ../tails_installer/creator.py:789
+#, python-format
+msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr ""
-#: ../liveusb/creator.py:393
-msgid ""
-"Error: The SHA1 of your Live CD is invalid. You can run this program with "
-"the --noverify argument to bypass this verification check."
+#: ../tails_installer/creator.py:799
+#, python-format
+msgid "Mount %s exists after unmounting"
msgstr ""
-#: ../liveusb/creator.py:155
-msgid "Extracting live image to the target device..."
+#: ../tails_installer/creator.py:812
+#, python-format
+msgid "Partitioning device %(device)s"
msgstr ""
-#: ../liveusb/creator.py:1140
+#: ../tails_installer/creator.py:890
#, python-format
-msgid "Formatting %(device)s as FAT32"
+msgid "Updating properties of system partition %(system_partition)s"
msgstr ""
-#: ../liveusb/creator.py:150
-msgid "ISO MD5 checksum passed"
+#: ../tails_installer/creator.py:944
+#, python-format
+msgid "Unsupported device '%(device)s', please report a bug."
msgstr ""
-#: ../liveusb/creator.py:148
-msgid "ISO MD5 checksum verification failed"
+#: ../tails_installer/creator.py:947
+msgid "Trying to continue anyway."
msgstr ""
-#: ../liveusb/dialog.py:163
-msgid ""
-"If you do not select an existing Live ISO, the selected release will be "
-"downloaded for you."
+#: ../tails_installer/creator.py:956 ../tails_installer/creator.py:1349
+msgid "Verifying filesystem..."
msgstr ""
-#: ../liveusb/launcher_ui.py:154
-msgid ""
-"Install\n"
-"by cloning"
+#: ../tails_installer/creator.py:980
+#, python-format
+msgid "Unable to change volume label: %(message)s"
msgstr ""
-#: ../liveusb/dialog.py:172
-msgid "Install Tails"
+#: ../tails_installer/creator.py:985 ../tails_installer/creator.py:1382
+msgid "Installing bootloader..."
msgstr ""
-#: ../liveusb/gui.py:645
-msgid "Installation complete!"
+#: ../tails_installer/creator.py:1011
+#, python-format
+msgid "Could not find the '%s' COM32 module"
msgstr ""
-#: ../liveusb/gui.py:265
+#: ../tails_installer/creator.py:1019 ../tails_installer/creator.py:1400
#, python-format
-msgid "Installation complete! (%s)"
+msgid "Removing %(file)s"
msgstr ""
-#: ../liveusb/gui.py:646
-msgid "Installation was completed. Press OK to close this program."
+#: ../tails_installer/creator.py:1131
+#, python-format
+msgid "%s already bootable"
msgstr ""
-#: ../liveusb/creator.py:990 ../liveusb/creator.py:1313
-msgid "Installing bootloader..."
+#: ../tails_installer/creator.py:1151
+msgid "Unable to find partition"
msgstr ""
-#: ../liveusb/gui.py:454
+#: ../tails_installer/creator.py:1174
#, python-format
-msgid ""
-"It is impossible to upgrade the device %(pretty_name)s because it was not "
-"created using Tails Installer. You should instead use %(action)s to upgrade "
-"Tails on this device."
-msgstr ""
-
-#: ../liveusb/gui.py:270
-msgid "LiveUSB creation failed!"
+msgid "Formatting %(device)s as FAT32"
msgstr ""
-#: ../liveusb/creator.py:1408
-msgid ""
-"Make sure to extract the entire liveusb-creator zip file before running this"
-" program."
+#: ../tails_installer/creator.py:1234
+msgid "Could not find syslinux' gptmbr.bin"
msgstr ""
-#: ../liveusb/creator.py:1284
-msgid ""
-"Make sure your USB key is plugged in and formatted with the FAT filesystem"
+#: ../tails_installer/creator.py:1247
+#, python-format
+msgid "Reading extracted MBR from %s"
msgstr ""
-#: ../liveusb/creator.py:859
+#: ../tails_installer/creator.py:1251
#, python-format
-msgid "Mount %s exists after unmounting"
+msgid "Could not read the extracted MBR from %(path)s"
msgstr ""
-#: ../liveusb/gui.py:588
+#: ../tails_installer/creator.py:1264 ../tails_installer/creator.py:1265
#, python-format
-msgid "No free space on device %(device)s"
+msgid "Resetting Master Boot Record of %s"
msgstr ""
-#: ../liveusb/creator.py:826
-msgid "No mount points found"
+#: ../tails_installer/creator.py:1270
+msgid "Drive is a loopback, skipping MBR reset"
msgstr ""
-#: ../liveusb/creator.py:410
+#: ../tails_installer/creator.py:1274 ../tails_installer/creator.py:1528
#, python-format
-msgid ""
-"Not enough free space on device.\n"
-"%dMB ISO + %dMB overlay > %dMB free space"
+msgid "Calculating the SHA1 of %s"
msgstr ""
-#: ../liveusb/gui.py:569
-msgid "Partition is FAT16; Restricting overlay size to 2G"
+#: ../tails_installer/creator.py:1299
+msgid "Synchronizing data on disk..."
msgstr ""
-#: ../liveusb/gui.py:565
-msgid "Partition is FAT32; Restricting overlay size to 4G"
+#: ../tails_installer/creator.py:1341
+msgid "Error probing device"
msgstr ""
-#: ../liveusb/creator.py:236 ../liveusb/creator.py:866
-#, python-format
-msgid "Partitioning device %(device)s"
+#: ../tails_installer/creator.py:1343
+msgid "Unable to find any supported device"
msgstr ""
-#: ../liveusb/gui.py:636
-msgid "Persistent Storage"
+#: ../tails_installer/creator.py:1353
+msgid ""
+"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr ""
-#: ../liveusb/dialog.py:168
-msgid "Persistent Storage (0 MB)"
+#: ../tails_installer/creator.py:1356
+#, python-format
+msgid ""
+"Unsupported filesystem: %s\n"
+"Please backup and format your USB key with the FAT filesystem."
msgstr ""
-#: ../liveusb/gui.py:698 ../liveusb/gui.py:727
-msgid "Please confirm your device selection"
+#: ../tails_installer/creator.py:1423
+msgid ""
+"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr ""
-#: ../liveusb/gui.py:481
-msgid "Refreshing releases..."
+#: ../tails_installer/creator.py:1476
+msgid "Cannot find"
msgstr ""
-#: ../liveusb/gui.py:486
-msgid "Releases updated!"
+#: ../tails_installer/creator.py:1477
+msgid ""
+"Make sure to extract the entire tails-installer zip file before running this"
+" program."
msgstr ""
-#: ../liveusb/creator.py:997 ../liveusb/creator.py:1331
+#: ../tails_installer/gui.py:69
#, python-format
-msgid "Removing %(file)s"
-msgstr ""
-
-#: ../liveusb/creator.py:492
-msgid "Removing existing Live OS"
+msgid "Unknown release: %s"
msgstr ""
-#: ../liveusb/creator.py:1186
+#: ../tails_installer/gui.py:73
#, python-format
-msgid "Resetting Master Boot Record of %s"
+msgid "Downloading %s..."
msgstr ""
-#: ../liveusb/gui.py:789
-msgid "Select Live ISO"
+#: ../tails_installer/gui.py:204
+msgid ""
+"Error: Cannot set the label or obtain the UUID of your device. Unable to "
+"continue."
msgstr ""
-#: ../liveusb/creator.py:192
-msgid "Setting up OLPC boot file..."
+#: ../tails_installer/gui.py:253
+#, python-format
+msgid "Installation complete! (%s)"
msgstr ""
-#: ../liveusb/creator.py:742
-#, python-format
-msgid ""
-"Some partitions of the target device %(device)s are mounted. They will be "
-"unmounted before starting the installation process."
+#: ../tails_installer/gui.py:258
+msgid "Tails installation failed!"
msgstr ""
-#: ../liveusb/creator.py:141
+#: ../tails_installer/gui.py:353
msgid ""
-"Source type does not support verification of ISO MD5 checksum, skipping"
+"Warning: This tool needs to be run as an Administrator. To do this, right "
+"click on the icon and open the Properties. Under the Compatibility tab, "
+"check the \"Run this program as an administrator\" box."
msgstr ""
-#: ../liveusb/creator.py:1220
-msgid "Synchronizing data on disk..."
+#: ../tails_installer/gui.py:365 ../tails_installer/launcher.py:31
+msgid "Tails Installer"
msgstr ""
-#: ../liveusb/dialog.py:166
-msgid "Target Device"
+#: ../tails_installer/gui.py:440
+msgid "No device suitable to install Tails could be found"
msgstr ""
-#: ../liveusb/gui.py:438
+#: ../tails_installer/gui.py:442
#, python-format
-msgid ""
-"The device \"%(pretty_name)s\" is too small to install Tails (at least "
-"%(size)s GB is required)."
+msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
msgstr ""
-#: ../liveusb/gui.py:792
-msgid ""
-"The selected file is unreadable. Please fix its permissions or select "
-"another file."
+#: ../tails_installer/gui.py:474
+#, python-format
+msgid "%(size)s %(label)s"
msgstr ""
-#: ../liveusb/creator.py:354
+#: ../tails_installer/gui.py:480
#, python-format
-msgid ""
-"There was a problem executing the following command: `%(command)s`.\n"
-"A more detailed error log has been written to '%(filename)s'."
+msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr ""
-#: ../liveusb/dialog.py:158
+#: ../tails_installer/gui.py:488
+#, python-format
msgid ""
-"This button allows you to browse for an existing Live system ISO that you "
-"have previously downloaded. If you do not select one, a release will be "
-"downloaded for you automatically."
+"The device \"%(pretty_name)s\" is too small to install Tails (at least "
+"%(size)s GB is required)."
msgstr ""
-#: ../liveusb/dialog.py:171
-msgid ""
-"This button will begin the LiveUSB creation process. This entails "
-"optionally downloading a release (if an existing one wasn't selected), "
-"extracting the ISO to the USB device, creating the persistent overlay, and "
-"installing the bootloader."
+#: ../tails_installer/gui.py:501
+msgid "\"Install by cloning\""
msgstr ""
-#: ../liveusb/dialog.py:165
-msgid ""
-"This is the USB stick that you want to install your Live system on. This "
-"device must be formatted with the FAT filesystem."
+#: ../tails_installer/gui.py:503
+msgid "\"Install from ISO\""
msgstr ""
-#: ../liveusb/dialog.py:170
+#: ../tails_installer/gui.py:504
+#, python-format
msgid ""
-"This is the progress bar that will indicate how far along in the LiveUSB "
-"creation process you are"
-msgstr ""
-
-#: ../liveusb/dialog.py:169
-msgid "This is the status console, where all messages get written to."
-msgstr ""
-
-#: ../liveusb/creator.py:952
-msgid "Trying to continue anyway."
+"It is impossible to upgrade the device %(pretty_name)s because it was not "
+"created using Tails Installer. You should instead use %(action)s to upgrade "
+"Tails on this device."
msgstr ""
-#: ../liveusb/gui.py:464
-msgid "USB drive found"
+#: ../tails_installer/gui.py:523
+msgid "An error happened while installing Tails"
msgstr ""
-#: ../liveusb/creator.py:985
-#, python-format
-msgid "Unable to change volume label: %(message)s"
+#: ../tails_installer/gui.py:535
+msgid "Refreshing releases..."
msgstr ""
-#: ../liveusb/creator.py:501 ../liveusb/creator.py:512
-#, python-format
-msgid "Unable to chmod %(file)s: %(message)s"
+#: ../tails_installer/gui.py:540
+msgid "Releases updated!"
msgstr ""
-#: ../liveusb/creator.py:478
-#, python-format
-msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
+#: ../tails_installer/gui.py:579
+msgid "Installation complete!"
msgstr ""
-#: ../liveusb/gui.py:403
-msgid "Unable to find any USB drive"
+#: ../tails_installer/gui.py:580
+msgid "Installation was completed."
msgstr ""
-#: ../liveusb/creator.py:1274
-msgid "Unable to find any supported device"
+#: ../tails_installer/gui.py:625
+msgid "Unable to mount device"
msgstr ""
-#: ../liveusb/creator.py:1117
-msgid "Unable to find partition"
+#: ../tails_installer/gui.py:632 ../tails_installer/gui.py:660
+msgid "Please confirm your device selection"
msgstr ""
-#: ../liveusb/creator.py:1354
+#: ../tails_installer/gui.py:633
+#, python-format
msgid ""
-"Unable to get Win32_LogicalDisk; win32com query did not return any results"
+"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
+"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr ""
-#: ../liveusb/gui.py:691
-msgid "Unable to mount device"
+#: ../tails_installer/gui.py:650
+#, python-format
+msgid ""
+"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
+"device (%(device)s). Any persistent volume on this device will remain "
+"unchanged. Continue?"
msgstr ""
-#: ../liveusb/creator.py:814
-#, python-format
-msgid "Unable to mount device: %(message)s"
+#: ../tails_installer/gui.py:706
+msgid "Download complete!"
msgstr ""
-#: ../liveusb/creator.py:517
-#, python-format
-msgid "Unable to remove directory from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:710
+msgid "Download failed: "
msgstr ""
-#: ../liveusb/creator.py:505
-#, python-format
-msgid "Unable to remove file from previous LiveOS: %(message)s"
+#: ../tails_installer/gui.py:711
+msgid "You can try again to resume your download"
msgstr ""
-#: ../liveusb/creator.py:1189
+#: ../tails_installer/gui.py:719
msgid ""
-"Unable to reset MBR. You may not have the `syslinux` package installed."
+"The selected file is unreadable. Please fix its permissions or select "
+"another file."
msgstr ""
-#: ../liveusb/gui.py:798
+#: ../tails_installer/gui.py:725
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr ""
-#: ../liveusb/creator.py:723
+#: ../tails_installer/gui.py:731
#, python-format
-msgid "Unable to write on %(device)s, skipping."
+msgid "%(filename)s selected"
msgstr ""
-#: ../liveusb/creator.py:399
-msgid "Unknown ISO, skipping checksum verification"
+#: ../tails_installer/source.py:28
+msgid "Unable to find LiveOS on ISO"
msgstr ""
-#: ../liveusb/creator.py:810
+#: ../tails_installer/source.py:34
#, python-format
-msgid "Unknown dbus exception while trying to mount device: %(message)s"
+msgid "Could not guess underlying block device: %s"
msgstr ""
-#: ../liveusb/creator.py:791 ../liveusb/creator.py:964
-msgid "Unknown filesystem. Your device may need to be reformatted."
+#: ../tails_installer/source.py:49
+#, python-format
+msgid ""
+"There was a problem executing `%s`.\n"
+"%s\n"
+"%s"
msgstr ""
-#: ../liveusb/gui.py:85
+#: ../tails_installer/source.py:63
#, python-format
-msgid "Unknown release: %s"
+msgid "'%s' does not exist"
msgstr ""
-#: ../liveusb/creator.py:851
+#: ../tails_installer/source.py:65
#, python-format
-msgid "Unmounting '%(udi)s' on '%(device)s'"
+msgid "'%s' is not a directory"
msgstr ""
-#: ../liveusb/creator.py:847
+#: ../tails_installer/source.py:75
#, python-format
-msgid "Unmounting mounted filesystems on '%(device)s'"
+msgid "Skipping '%(filename)s'"
msgstr ""
-#: ../liveusb/creator.py:949
+#: ../tails_installer/utils.py:44
#, python-format
-msgid "Unsupported device '%(device)s', please report a bug."
+msgid ""
+"There was a problem executing `%s`.%s\n"
+"%s"
msgstr ""
-#: ../liveusb/creator.py:794 ../liveusb/creator.py:967
-#, python-format
-msgid "Unsupported filesystem: %s"
+#: ../tails_installer/utils.py:119
+msgid "Could not open device for writing."
msgstr ""
-#: ../liveusb/creator.py:1287
-#, python-format
-msgid ""
-"Unsupported filesystem: %s\n"
-"Please backup and format your USB key with the FAT filesystem."
+#: ../data/tails-installer.ui.h:1
+msgid "Use existing Live system ISO:"
msgstr ""
-#: ../liveusb/creator.py:892
-#, python-format
-msgid "Updating properties of system partition %(system_partition)s"
+#: ../data/tails-installer.ui.h:2
+msgid "Select a distribution to download:"
msgstr ""
-#: ../liveusb/launcher_ui.py:156
-msgid ""
-"Upgrade\n"
-"by cloning"
+#: ../data/tails-installer.ui.h:3
+msgid "Target Device:"
+msgstr ""
+
+#: ../data/tails-installer.ui.h:4
+msgid "Install Tails"
msgstr ""
-#: ../liveusb/launcher_ui.py:158
+#: ../data/tails-installer-launcher.ui.h:1
msgid ""
-"Upgrade\n"
-"from ISO"
+"To run Tails Installer you need an ISO image which can be downloaded from "
+"the Tails website: <a "
+"href=\"https://tails.boum.org/download/\">https://tails.boum.org/download/</a>"
msgstr ""
-#: ../liveusb/dialog.py:159
-msgid "Use existing Live system ISO"
+#: ../data/tails-installer-launcher.ui.h:2
+msgid "Install"
msgstr ""
-#: ../liveusb/creator.py:143
-msgid "Verifying ISO MD5 checksum"
+#: ../data/tails-installer-launcher.ui.h:3
+msgid "• Install Tails on a new USB stick."
msgstr ""
-#: ../liveusb/creator.py:373
-msgid "Verifying SHA1 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:4
+msgid "• The USB stick that you install on is formatted and all data is lost."
msgstr ""
-#: ../liveusb/creator.py:377
-msgid "Verifying SHA256 checksum of LiveCD image..."
+#: ../data/tails-installer-launcher.ui.h:5
+msgid "Upgrade"
msgstr ""
-#: ../liveusb/creator.py:961 ../liveusb/creator.py:1280
-msgid "Verifying filesystem..."
+#: ../data/tails-installer-launcher.ui.h:6
+msgid "• Upgrade a Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/gui.py:725
+#: ../data/tails-installer-launcher.ui.h:7
msgid ""
-"Warning: Creating a new persistent overlay will delete your existing one."
+"• The encrypted persistent storage of the Tails USB stick that you upgrade "
+"is preserved."
msgstr ""
-#: ../liveusb/gui.py:377
+#: ../data/tails-installer-launcher.ui.h:8
msgid ""
-"Warning: This tool needs to be run as an Administrator. To do this, right "
-"click on the icon and open the Properties. Under the Compatibility tab, "
-"check the \"Run this program as an administrator\" box."
+"Need help? Read the <a "
+"href=\"https://tails.boum.org/doc/first_steps/installation/\">documentation</a>"
msgstr ""
-#: ../liveusb/creator.py:162
-#, python-format
-msgid "Wrote to device at %(speed)d MB/sec"
+#: ../data/tails-installer-launcher.ui.h:9
+msgid "Install by cloning"
msgstr ""
-#: ../liveusb/gui.py:699
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:10
msgid ""
-"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
-"(%(device)s). All data on the selected device will be lost. Continue?"
+"• Install Tails on another USB stick by copying the Tails system that you "
+"are currently using."
msgstr ""
-#: ../liveusb/gui.py:715
-#, python-format
+#: ../data/tails-installer-launcher.ui.h:11
msgid ""
-"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
-"device (%(device)s). Any persistent volume on this device will remain "
-"unchanged. Continue?"
+"• The encrypted persistent storage of the Tails USB stick that you are "
+"currently using is not copied."
+msgstr ""
+
+#: ../data/tails-installer-launcher.ui.h:12
+msgid "Upgrade by cloning"
msgstr ""
-#: ../liveusb/creator.py:622
+#: ../data/tails-installer-launcher.ui.h:13
msgid ""
-"You are using an old version of syslinux-extlinux that does not support the "
-"ext4 filesystem"
+"• Upgrade another Tails USB stick to the same version of Tails that you are "
+"currently using."
msgstr ""
-#: ../liveusb/gui.py:783
-msgid "You can try again to resume your download"
+#: ../data/tails-installer-launcher.ui.h:14
+msgid "Upgrade from ISO"
msgstr ""
-#: ../liveusb/creator.py:95
-msgid "You must run this application as root"
+#: ../data/tails-installer-launcher.ui.h:15
+msgid "• Upgrade another Tails USB stick to the version of an ISO image."
msgstr ""
-#: ../liveusb/dialog.py:162
-msgid "or"
+#: ../data/tails-installer-launcher.ui.h:16
+msgid ""
+"Need help? Read the <a "
+"href=\"file:///usr/share/doc/tails/website/doc/first_steps/installation.en.html\">documentation</a>"
msgstr ""
More information about the tor-commits
mailing list