[tor-commits] [ooni-probe/master] Add configs for lepidopter update

art at torproject.org art at torproject.org
Tue Jul 26 11:00:20 UTC 2016


commit 6217c6533f4977024e3d2d23168e05f8c06ae3f3
Author: Arturo Filastò <arturo at filasto.net>
Date:   Tue Jul 12 12:22:24 2016 +0200

    Add configs for lepidopter update
---
 data/configs/lepidopter-ooniprobe.conf  | 75 +++++++++++++++++++++++++++++++++
 data/configs/lepidopter-oonireport.conf | 69 ++++++++++++++++++++++++++++++
 2 files changed, 144 insertions(+)

diff --git a/data/configs/lepidopter-ooniprobe.conf b/data/configs/lepidopter-ooniprobe.conf
new file mode 100644
index 0000000..5c8ba40
--- /dev/null
+++ b/data/configs/lepidopter-ooniprobe.conf
@@ -0,0 +1,75 @@
+# This is the configuration file for OONIProbe
+# This file follows the YAML markup format: http://yaml.org/spec/1.2/spec.html
+# Keep in mind that indentation matters.
+
+basic:
+    # Where OONIProbe should be writing it's log file
+    logfile: /var/log/ooni/ooniprobe.log
+    # in the future we will support loglevels
+    loglevel: WARNING
+privacy:
+    # Should we include the IP address of the probe in the report?
+    includeip: false
+    # Should we include the ASN of the probe in the report?
+    includeasn: true
+    # Should we include the country as reported by GeoIP in the report?
+    includecountry: true
+    # Should we include the city as reported by GeoIP in the report?
+    includecity: false
+    # Should we collect a full packet capture on the client?
+    includepcap: false
+reports:
+    # Should we place a unique ID inside of every report
+    unique_id: true
+    # This is a prefix for each packet capture file (.pcap) per test:
+    pcap: null
+    collector: null
+advanced:
+    geoip_data_dir: /usr/share/GeoIP
+    debug: false
+    # enable if auto detection fails
+    #tor_binary: /usr/sbin/tor
+    #obfsproxy_binary: /usr/bin/obfsproxy 
+    # For auto detection
+    interface: auto
+    # Of specify a specific interface
+    #interface: wlan0
+    # If you do not specify start_tor, you will have to have Tor running and
+    # explicitly set the control port and SOCKS port
+    start_tor: true
+    # After how many seconds we should give up on a particular measurement
+    measurement_timeout: 120
+    # After how many retries we should give up on a measurement
+    measurement_retries: 2
+    # How many measurements to perform concurrently
+    measurement_concurrency: 4
+    # After how may seconds we should give up reporting
+    reporting_timeout: 360
+    # After how many retries to give up on reporting
+    reporting_retries: 5
+    # How many reports to perform concurrently
+    reporting_concurrency: 7
+    oonid_api_port: 8042
+    report_log_file: null
+    inputs_dir: null
+    decks_dir: null
+tor:
+    #socks_port: 8801
+    #control_port: 8802
+    # Specify the absolute path to the Tor bridges to use for testing
+    #bridges: bridges.list
+    # Specify path of the tor datadirectory.
+    # This should be set to something to avoid having Tor download each time
+    # the descriptors and consensus data.
+    data_dir: /opt/ooni/tor_data_dir
+torrc:
+    #HTTPProxy: host:port
+    #HTTPProxyAuthenticator: user:password
+    #HTTPSProxy: host:port
+    #HTTPSProxyAuthenticator: user:password
+    # Uncomment following 5 lines to connect via meek pluggable transport in tor
+    #UseBridges: 1
+    #Bridge:
+    #- "meek_lite 0.0.2.0:1 url=https://d2zfqthxsdq309.cloudfront.net/ front=a0.awsstatic.com"
+    #- "meek_lite 0.0.2.0:2 url=https://az786092.vo.msecnd.net/ front=ajax.aspnetcdn.com"
+    #ClientTransportPlugin: "meek_lite exec /usr/bin/obfs4proxy"
diff --git a/data/configs/lepidopter-oonireport.conf b/data/configs/lepidopter-oonireport.conf
new file mode 100644
index 0000000..8ea3ccc
--- /dev/null
+++ b/data/configs/lepidopter-oonireport.conf
@@ -0,0 +1,69 @@
+# This is the configuration file for OONIProbe
+# This file follows the YAML markup format: http://yaml.org/spec/1.2/spec.html
+# Keep in mind that indentation matters.
+
+basic:
+    # Where OONIProbe should be writing it's log file
+    logfile: /var/log/ooni/oonireport.log
+    # in the future we will support loglevels
+    loglevel: WARNING
+privacy:
+    # Should we include the IP address of the probe in the report?
+    includeip: false
+    # Should we include the ASN of the probe in the report?
+    includeasn: true
+    # Should we include the country as reported by GeoIP in the report?
+    includecountry: true
+    # Should we include the city as reported by GeoIP in the report?
+    includecity: false
+    # Should we collect a full packet capture on the client?
+    includepcap: false
+reports:
+    # Should we place a unique ID inside of every report
+    unique_id: true
+    # This is a prefix for each packet capture file (.pcap) per test:
+    pcap: null
+    collector: null
+advanced:
+    geoip_data_dir: /usr/share/GeoIP
+    debug: false
+    # enable if auto detection fails
+    #tor_binary: /usr/sbin/tor
+    #obfsproxy_binary: /usr/bin/obfsproxy 
+    # For auto detection
+    interface: auto
+    # Of specify a specific interface
+    #interface: wlan0
+    # If you do not specify start_tor, you will have to have Tor running and
+    # explicitly set the control port and SOCKS port
+    start_tor: false
+    # After how many seconds we should give up on a particular measurement
+    measurement_timeout: 120
+    # After how many retries we should give up on a measurement
+    measurement_retries: 2
+    # How many measurements to perform concurrently
+    measurement_concurrency: 4
+    # After how may seconds we should give up reporting
+    reporting_timeout: 360
+    # After how many retries to give up on reporting
+    reporting_retries: 5
+    # How many reports to perform concurrently
+    reporting_concurrency: 7
+    oonid_api_port: 8042
+    report_log_file: null
+    inputs_dir: null
+    decks_dir: null
+tor:
+    socks_port: 9050
+    #control_port: 8802
+    # Specify the absolute path to the Tor bridges to use for testing
+    #bridges: bridges.list
+    # Specify path of the tor datadirectory.
+    # This should be set to something to avoid having Tor download each time
+    # the descriptors and consensus data.
+    #data_dir: ~/.tor/
+    torrc:
+        #HTTPProxy: host:port
+        #HTTPProxyAuthenticator: user:password
+        #HTTPSProxy: host:port
+        #HTTPSProxyAuthenticator: user:password





More information about the tor-commits mailing list