[tor-commits] [tor/master] added some markdown formatting
nickm at torproject.org
nickm at torproject.org
Thu Nov 5 14:13:58 UTC 2015
commit 617e0f8d26449a4c51479666ce29039b901187ba
Author: tom lurge <tomlurge at gmail.com>
Date: Thu Nov 5 09:13:53 2015 -0500
added some markdown formatting
---
doc/HACKING/CodingStandards.md | 129 ++++++++++++++-------------
doc/HACKING/GettingStarted.md | 77 ++++++++--------
doc/HACKING/HelpfulTools.md | 185 ++++++++++++++++++--------------------
doc/HACKING/HowToReview.md | 60 ++++++-------
doc/HACKING/README.1st.md | 28 +++---
doc/HACKING/ReleasingTor.md | 184 +++++++++++++++++++-------------------
doc/HACKING/WritingTests.md | 192 ++++++++++++++++++++--------------------
7 files changed, 430 insertions(+), 425 deletions(-)
diff --git a/doc/HACKING/CodingStandards.md b/doc/HACKING/CodingStandards.md
index ff602bd..f7541d7 100644
--- a/doc/HACKING/CodingStandards.md
+++ b/doc/HACKING/CodingStandards.md
@@ -1,16 +1,16 @@
Coding conventions for Tor
---------------------------
+==========================
tl;dr:
- * Run configure with '--enable-gcc-warnings'
- * Run 'make check-spaces' to catch whitespace errors
- * Document your functions
- * Write unit tests
- * Add a file in 'changes' for your branch.
+ - Run configure with `--enable-gcc-warnings`
+ - Run `make check-spaces` to catch whitespace errors
+ - Document your functions
+ - Write unit tests
+ - Add a file in `changes` for your branch.
Patch checklist
-~~~~~~~~~~~~~~~
+---------------
If possible, send your patch as one of these (in descending order of
preference)
@@ -21,16 +21,16 @@ preference)
Did you remember...
- - To build your code while configured with --enable-gcc-warnings?
- - To run "make check-spaces" on your code?
- - To run "make check-docs" to see whether all new options are on
+ - To build your code while configured with `--enable-gcc-warnings`?
+ - To run `make check-spaces` on your code?
+ - To run `make check-docs` to see whether all new options are on
the manpage?
- To write unit tests, as possible?
- To base your code on the appropriate branch?
- - To include a file in the "changes" directory as appropriate?
+ - To include a file in the `changes` directory as appropriate?
How we use Git branches
------------------------
+=======================
Each main development series (like 0.2.1, 0.2.2, etc) has its main work
applied to a single branch. At most one series can be the development series
@@ -54,13 +54,13 @@ you're working on a new feature, base it on the master branch.
How we log changes
-------------------
+==================
When you do a commit that needs a ChangeLog entry, add a new file to
-the "changes" toplevel subdirectory. It should have the format of a
+the `changes` toplevel subdirectory. It should have the format of a
one-entry changelog section from the current ChangeLog file, as in
- o Major bugfixes:
+- Major bugfixes:
- Fix a potential buffer overflow. Fixes bug 99999; bugfix on
0.3.1.4-beta.
@@ -69,110 +69,115 @@ are: Minor bugfixes, Major bugfixes, Minor features, Major features, Code
simplifications and refactoring. Then say what the change does. If
it's a bugfix, mention what bug it fixes and when the bug was
introduced. To find out which Git tag the change was introduced in,
-you can use "git describe --contains <sha1 of commit>".
+you can use `git describe --contains <sha1 of commit>`.
If at all possible, try to create this file in the same commit where you are
making the change. Please give it a distinctive name that no other branch will
use for the lifetime of your change. To verify the format of the changes file,
-you can use "make check-changes".
+you can use `make check-changes`.
When we go to make a release, we will concatenate all the entries
in changes to make a draft changelog, and clear the directory. We'll
then edit the draft changelog into a nice readable format.
-What needs a changes file?::
- A not-exhaustive list: Anything that might change user-visible
+What needs a changes file?
+
+ * A not-exhaustive list: Anything that might change user-visible
behavior. Anything that changes internals, documentation, or the build
system enough that somebody could notice. Big or interesting code
rewrites. Anything about which somebody might plausibly wonder "when
did that happen, and/or why did we do that" 6 months down the line.
-Why use changes files instead of Git commit messages?::
- Git commit messages are written for developers, not users, and they
+Why use changes files instead of Git commit messages?
+
+ * Git commit messages are written for developers, not users, and they
are nigh-impossible to revise after the fact.
-Why use changes files instead of entries in the ChangeLog?::
- Having every single commit touch the ChangeLog file tended to create
+Why use changes files instead of entries in the ChangeLog?
+
+ * Having every single commit touch the ChangeLog file tended to create
zillions of merge conflicts.
Whitespace and C conformance
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+----------------------------
-Invoke "make check-spaces" from time to time, so it can tell you about
+Invoke `make check-spaces` from time to time, so it can tell you about
deviations from our C whitespace style. Generally, we use:
- - Unix-style line endings
- - K&R-style indentation
- - No space before newlines
- - A blank line at the end of each file
- - Never more than one blank line in a row
- - Always spaces, never tabs
- - No more than 79-columns per line.
- - Two spaces per indent.
- - A space between control keywords and their corresponding paren
- "if (x)", "while (x)", and "switch (x)", never "if(x)", "while(x)", or
- "switch(x)".
- - A space between anything and an open brace.
- - No space between a function name and an opening paren. "puts(x)", not
- "puts (x)".
- - Function declarations at the start of the line.
+ - Unix-style line endings
+ - K&R-style indentation
+ - No space before newlines
+ - A blank line at the end of each file
+ - Never more than one blank line in a row
+ - Always spaces, never tabs
+ - No more than 79-columns per line.
+ - Two spaces per indent.
+ - A space between control keywords and their corresponding paren
+ `if (x)`, `while (x)`, and `switch (x)`, never `if(x)`, `while(x)`, or
+ `switch(x)`.
+ - A space between anything and an open brace.
+ - No space between a function name and an opening paren. `puts(x)`, not
+ `puts (x)`.
+ - Function declarations at the start of the line.
We try hard to build without warnings everywhere. In particular, if you're
using gcc, you should invoke the configure script with the option
-"--enable-gcc-warnings". This will give a bunch of extra warning flags to
+`--enable-gcc-warnings`. This will give a bunch of extra warning flags to
the compiler, and help us find divergences from our preferred C style.
Functions to use; functions not to use
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------------------------------
-We have some wrapper functions like tor_malloc, tor_free, tor_strdup, and
-tor_gettimeofday; use them instead of their generic equivalents. (They
+We have some wrapper functions like `tor_malloc`, `tor_free`, `tor_strdup`, and
+`tor_gettimeofday;` use them instead of their generic equivalents. (They
always succeed or exit.)
You can get a full list of the compatibility functions that Tor provides by
-looking through src/common/util*.h and src/common/compat*.h. You can see the
-available containers in src/common/containers*.h. You should probably
+looking through `src/common/util*.h` and `src/common/compat*.h`. You can see the
+available containers in `src/common/containers*.h`. You should probably
familiarize yourself with these modules before you write too much code, or
else you'll wind up reinventing the wheel.
-Use 'INLINE' instead of 'inline' -- it's a vestige of an old hack to make
+Use `INLINE` instead of `inline` -- it's a vestige of an old hack to make
sure that we worked on MSVC6.
-We don't use strcat or strcpy or sprintf of any of those notoriously broken
-old C functions. Use strlcat, strlcpy, or tor_snprintf/tor_asprintf instead.
+We don't use `strcat` or `strcpy` or `sprintf` of any of those notoriously broken
+old C functions. Use `strlcat`, `strlcpy`, or `tor_snprintf/tor_asprintf` instead.
-We don't call memcmp() directly. Use fast_memeq(), fast_memneq(),
-tor_memeq(), or tor_memneq() for most purposes.
+We don't call `memcmp()` directly. Use `fast_memeq()`, `fast_memneq()`,
+`tor_memeq()`, or `tor_memneq()` for most purposes.
Functions not to write
-~~~~~~~~~~~~~~~~~~~~~~
+----------------------
Try to never hand-write new code to parse or generate binary
-formats. Instead, use trunnel if at all possible. See
+formats. Instead, use trunnel if at all possible. See
+
https://gitweb.torproject.org/trunnel.git/tree
+
for more information about trunnel.
For information on adding new trunnel code to Tor, see src/trunnel/README
Calling and naming conventions
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------
Whenever possible, functions should return -1 on error and 0 on success.
For multi-word identifiers, use lowercase words combined with
-underscores. (e.g., "multi_word_identifier"). Use ALL_CAPS for macros and
+underscores. (e.g., `multi_word_identifier`). Use ALL_CAPS for macros and
constants.
-Typenames should end with "_t".
+Typenames should end with `_t`.
Function names should be prefixed with a module name or object name. (In
general, code to manipulate an object should be a module with the same name
as the object, so it's hard to tell which convention is used.)
Functions that do things should have imperative-verb names
-(e.g. buffer_clear, buffer_resize); functions that return booleans should
-have predicate names (e.g. buffer_is_empty, buffer_needs_resizing).
+(e.g. `buffer_clear`, `buffer_resize`); functions that return booleans should
+have predicate names (e.g. `buffer_is_empty`, `buffer_needs_resizing`).
If you find that you have four or more possible return code values, it's
probably time to create an enum. If you find that you are passing three or
@@ -180,16 +185,16 @@ more flags to a function, it's probably time to create a flags argument that
takes a bitfield.
What To Optimize
-~~~~~~~~~~~~~~~~
+----------------
Don't optimize anything if it's not in the critical path. Right now, the
critical path seems to be AES, logging, and the network itself. Feel free to
do your own profiling to determine otherwise.
Log conventions
-~~~~~~~~~~~~~~~
+---------------
-https://www.torproject.org/docs/faq#LogLevel
+`https://www.torproject.org/docs/faq#LogLevel`
No error or warning messages should be expected during normal OR or OP
operation.
@@ -206,7 +211,7 @@ option (B).
Doxygen comment conventions
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
+---------------------------
Say what functions do as a series of one or more imperative sentences, as
though you were telling somebody how to be the function. In other words, DO
diff --git a/doc/HACKING/GettingStarted.md b/doc/HACKING/GettingStarted.md
index ee024fe..4ab26b7 100644
--- a/doc/HACKING/GettingStarted.md
+++ b/doc/HACKING/GettingStarted.md
@@ -37,10 +37,11 @@ Getting your first patch into Tor
Once you've reached this point, here's what you need to know.
- 1) Get the source.
+ 1. Get the source.
We keep our source under version control in Git. To get the latest
- version, run
+ version, run
+
git clone https://git.torproject.org/git/tor
This will give you a checkout of the master branch. If you're
@@ -49,10 +50,11 @@ Once you've reached this point, here's what you need to know.
git checkout maint-0.2.7
- 2) Find your way around the source
+ 2. Find your way around the source
Our overall code structure is explained in the "torguts" documents,
currently at
+
git clone https://git.torproject.org/user/nickm/torguts.git
Find a part of the code that looks interesting to you, and start
@@ -64,14 +66,14 @@ Once you've reached this point, here's what you need to know.
If you see something that doesn't make sense, we love to get
questions!
- 3) Find something cool to hack on.
+ 3. Find something cool to hack on.
You may already have a good idea of what you'd like to work on, or
you might be looking for a way to contribute.
Many people have gotten started by looking for an area where they
personally felt Tor was underperforming, and investigating ways to
- fix it. If you're looking for ideas, you can head to our bug
+ fix it. If you're looking for ideas, you can head to our bug
tracker at trac.torproject.org and look for tickets that have
received the "easy" tag: these are ones that developers think would
be pretty simple for a new person to work on. For a bigger
@@ -86,11 +88,12 @@ Once you've reached this point, here's what you need to know.
For your first patch, it is probably NOT a good idea to make
something huge or invasive. In particular, you should probably
avoid:
- * Major changes spread across many parts of the codebase.
- * Major changes to programming practice or coding style.
- * Huge new features or protocol changes.
+
+ * Major changes spread across many parts of the codebase.
+ * Major changes to programming practice or coding style.
+ * Huge new features or protocol changes.
- 4) Meet the developers!
+ 4. Meet the developers!
We discuss stuff on the tor-dev mailing list and on the #tor-dev
IRC channel on OFTC. We're generally friendly and approachable,
@@ -103,7 +106,7 @@ Once you've reached this point, here's what you need to know.
better. The time might change in the future, but generally,
there's no bad time to talk, and ask us about patch ideas.
- 5) Do you need to write a design proposal?
+ 5. Do you need to write a design proposal?
If your idea is very large, or it will require a change to Tor's
protocols, there needs to be a written design proposal before it
@@ -116,7 +119,7 @@ Once you've reached this point, here's what you need to know.
You might also like to look around the rest of that directory, to
see more about open and past proposed changes to Tor's behavior.
- 6) Writing your patch
+ 6. Writing your patch
As you write your code, you'll probably want it to fit in with the
standards of the rest of the Tor codebase so it will be easy for us
@@ -127,7 +130,7 @@ Once you've reached this point, here's what you need to know.
components, remember to divide it into a series of Git commits. A
series of small changes is much easier to review than one big lump.
- 7) Testing your patch
+ 7. Testing your patch
We prefer that all new or modified code have unit tests for it to
ensure that it runs correctly. Also, all code should actually be
@@ -137,7 +140,7 @@ Once you've reached this point, here's what you need to know.
in Tor. If you'd like any help writing tests, just ask! We're
glad to help out.
- 8) Submitting your patch
+ 8. Submitting your patch
We review patches through tickets on our bugtracker at
trac.torproject.org. You can either upload your patches there, or
@@ -149,7 +152,7 @@ Once you've reached this point, here's what you need to know.
you've done on trac, and then change the status of the ticket to
needs_review.
- 9) Review, Revision, and Merge
+ 9. Review, Revision, and Merge
With any luck, somebody will review your patch soon! If not, you
can ask on the IRC channel; sometimes we get really busy and take
@@ -159,29 +162,29 @@ Once you've reached this point, here's what you need to know.
When your patch is reviewed, one of these things will happen:
- * The reviewer will say "looks good to me" and your
- patch will get merged right into Tor. [Assuming we're not
- in the middle of a code-freeze window. If the codebase is
- frozen, your patch will go into the next release series.]
-
- * OR the reviewer will say "looks good, just needs some small
- changes!" And then the reviewer will make those changes,
- and merge the modified patch into Tor.
-
- * OR the reviewer will say "Here are some questions and
- comments," followed by a bunch of stuff that the reviewer
- thinks should change in your code, or questions that the
- reviewer has.
-
- At this point, you might want to make the requested changes
- yourself, and comment on the trac ticket once you have done
- so. Or if you disagree with any of the comments, you should
- say so! And if you won't have time to make some of the
- changes, you should say that too, so that other developers
- will be able to pick up the unfinished portion
-
- Congratulations! You have now written your first patch, and gotten
- it integrated into mainline Tor.
+ * The reviewer will say "looks good to me" and your
+ patch will get merged right into Tor. [Assuming we're not
+ in the middle of a code-freeze window. If the codebase is
+ frozen, your patch will go into the next release series.]
+
+ * OR the reviewer will say "looks good, just needs some small
+ changes!" And then the reviewer will make those changes,
+ and merge the modified patch into Tor.
+
+ * OR the reviewer will say "Here are some questions and
+ comments," followed by a bunch of stuff that the reviewer
+ thinks should change in your code, or questions that the
+ reviewer has.
+
+ At this point, you might want to make the requested changes
+ yourself, and comment on the trac ticket once you have done
+ so. Or if you disagree with any of the comments, you should
+ say so! And if you won't have time to make some of the
+ changes, you should say that too, so that other developers
+ will be able to pick up the unfinished portion.
+
+ Congratulations! You have now written your first patch, and gotten
+ it integrated into mainline Tor.
diff --git a/doc/HACKING/HelpfulTools.md b/doc/HACKING/HelpfulTools.md
index cf74063..810519c 100644
--- a/doc/HACKING/HelpfulTools.md
+++ b/doc/HACKING/HelpfulTools.md
@@ -1,159 +1,149 @@
Useful tools
-------------
+============
These aren't strictly necessary for hacking on Tor, but they can help track
down bugs.
Jenkins
-~~~~~~~
+-------
-https://jenkins.torproject.org
+ https://jenkins.torproject.org
Dmalloc
-~~~~~~~
+-------
The dmalloc library will keep track of memory allocation, so you can find out
if we're leaking memory, doing any double-frees, or so on.
- dmalloc -l ~/dmalloc.log
- (run the commands it tells you)
- ./configure --with-dmalloc
+ dmalloc -l -/dmalloc.log
+ (run the commands it tells you)
+ ./configure --with-dmalloc
Valgrind
-~~~~~~~~
+--------
-valgrind --leak-check=yes --error-limit=no --show-reachable=yes src/or/tor
+ valgrind --leak-check=yes --error-limit=no --show-reachable=yes src/or/tor
(Note that if you get a zillion openssl warnings, you will also need to
-pass --undef-value-errors=no to valgrind, or rebuild your openssl
-with -DPURIFY.)
+pass `--undef-value-errors=no` to valgrind, or rebuild your openssl
+with `-DPURIFY`.)
Coverity
-~~~~~~~~
+--------
Nick regularly runs the coverity static analyzer on the Tor codebase.
-The preprocessor define __COVERITY__ is used to work around instances
+The preprocessor define `__COVERITY__` is used to work around instances
where coverity picks up behavior that we wish to permit.
clang Static Analyzer
-~~~~~~~~~~~~~~~~~~~~~
+---------------------
The clang static analyzer can be run on the Tor codebase using Xcode (WIP)
or a command-line build.
-The preprocessor define __clang_analyzer__ is used to work around instances
+The preprocessor define `__clang_analyzer__` is used to work around instances
where clang picks up behavior that we wish to permit.
clang Runtime Sanitizers
-~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------
To build the Tor codebase with the clang Address and Undefined Behavior
-sanitizers, see the file contrib/clang/sanitize_blacklist.txt.
+sanitizers, see the file `contrib/clang/sanitize_blacklist.txt`.
Preprocessor workarounds for instances where clang picks up behavior that
we wish to permit are also documented in the blacklist file.
Running lcov for unit test coverage
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------
Lcov is a utility that generates pretty HTML reports of test code coverage.
To generate such a report:
------
- ./configure --enable-coverage
- make
- make coverage-html
- $BROWSER ./coverage_html/index.html
------
+ ./configure --enable-coverage
+ make
+ make coverage-html
+ $BROWSER ./coverage_html/index.html
This will run the tor unit test suite `./src/test/test` and generate the HTML
-coverage code report under the directory ./coverage_html/. To change the
+coverage code report under the directory `./coverage_html/`. To change the
output directory, use `make coverage-html HTML_COVER_DIR=./funky_new_cov_dir`.
Coverage diffs using lcov are not currently implemented, but are being
investigated (as of July 2014).
Running the unit tests
-~~~~~~~~~~~~~~~~~~~~~~
+----------------------
To quickly run all the tests distributed with Tor:
------
- make check
------
+
+ make check
To run the fast unit tests only:
------
- make test
------
+
+ make test
To selectively run just some tests (the following can be combined
arbitrarily):
------
- ./src/test/test <name_of_test> [<name of test 2>] ...
- ./src/test/test <prefix_of_name_of_test>.. [<prefix_of_name_of_test2>..] ...
- ./src/test/test :<name_of_excluded_test> [:<name_of_excluded_test2]...
------
+
+ ./src/test/test <name_of_test> [<name of test 2>] ...
+ ./src/test/test <prefix_of_name_of_test>.. [<prefix_of_name_of_test2>..] ...
+ ./src/test/test :<name_of_excluded_test> [:<name_of_excluded_test2]...
To run all tests, including those based on Stem or Chutney:
------
- make test-full
------
+
+ make test-full
To run all tests, including those based on Stem or Chutney that require a
working connection to the internet:
------
- make test-full-online
------
-Running gcov for unit test coverage
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
------
- ./configure --enable-coverage
- make
- make check
- # or--- make test-full ? make test-full-online?
- mkdir coverage-output
- ./scripts/test/coverage coverage-output
------
+ make test-full-online
-(On OSX, you'll need to start with "--enable-coverage CC=clang".)
-
-Then, look at the .gcov files in coverage-output. '-' before a line means
+Running gcov for unit test coverage
+-----------------------------------
+
+ ./configure --enable-coverage
+ make
+ make check
+ # or--- make test-full ? make test-full-online?
+ mkdir coverage-output
+ ./scripts/test/coverage coverage-output
+
+(On OSX, you'll need to start with `--enable-coverage CC=clang`.)
+
+Then, look at the .gcov files in `coverage-output`. '-' before a line means
that the compiler generated no code for that line. '######' means that the
line was never reached. Lines with numbers were called that number of times.
If that doesn't work:
- * Try configuring Tor with --disable-gcc-hardening
- * You might need to run 'make clean' after you run './configure'.
+
+ * Try configuring Tor with `--disable-gcc-hardening`
+ * You might need to run `make clean` after you run `./configure`.
If you make changes to Tor and want to get another set of coverage results,
-you can run "make reset-gcov" to clear the intermediary gcov output.
+you can run `make reset-gcov` to clear the intermediary gcov output.
-If you have two different "coverage-output" directories, and you want to see
+If you have two different `coverage-output` directories, and you want to see
a meaningful diff between them, you can run:
------
- ./scripts/test/cov-diff coverage-output1 coverage-output2 | less
------
+ ./scripts/test/cov-diff coverage-output1 coverage-output2 | less
In this diff, any lines that were visited at least once will have coverage
"1". This lets you inspect what you (probably) really want to know: which
untested lines were changed? Are there any new untested lines?
Running integration tests
-~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------
We have the beginnings of a set of scripts to run integration tests using
Chutney. To try them, set CHUTNEY_PATH to your chutney source directory, and
-run "make test-network".
+run `make test-network`.
We also have scripts to run integration tests using Stem. To try them, set
-STEM_SOURCE_DIR to your Stem source directory, and run "test-stem".
+`STEM_SOURCE_DIR` to your Stem source directory, and run `test-stem`.
Profiling Tor with oprofile
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+---------------------------
The oprofile tool runs (on Linux only!) to tell you what functions Tor is
spending its CPU time in, so we can identify performance bottlenecks.
@@ -165,30 +155,30 @@ Here are some basic instructions
- Build all the libraries you care about with debugging symbols
(probably you only care about libssl, maybe zlib and Libevent).
- Copy this tor to a new directory
- - Copy all the libraries it uses to that dir too (ldd ./tor will
+ - Copy all the libraries it uses to that dir too (`ldd ./tor` will
tell you)
- - Set LD_LIBRARY_PATH to include that dir. ldd ./tor should now
+ - Set LD_LIBRARY_PATH to include that dir. `ldd ./tor` should now
show you it's using the libs in that dir
- Run that tor
- Reset oprofiles counters/start it
- * "opcontrol --reset; opcontrol --start", if Nick remembers right.
+ * `opcontrol --reset; opcontrol --start`, if Nick remembers right.
- After a while, have it dump the stats on tor and all the libs
in that dir you created.
- * "opcontrol --dump;"
- * "opreport -l that_dir/*"
+ * `opcontrol --dump;`
+ * `opreport -l that_dir/*`
- Profit
Generating and analyzing a callgraph
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------------
-1. Run ./scripts/maint/generate_callgraph.sh . This will generate a
+1. Run `./scripts/maint/generate_callgraph.sh`. This will generate a
bunch of files in a new ./callgraph directory.
-2. Run ./scripts/maint/analyze_callgraph.py callgraph/src/*/* . This
+2. Run `./scripts/maint/analyze_callgraph.py callgraph/src/*/*`. This
will do a lot of graph operations and then dump out a new
- "callgraph.pkl" file, containing data in Python's "pickle" format.
+ `callgraph.pkl` file, containing data in Python's 'pickle' format.
-3. Run ./scripts/maint/display_callgraph.py . It will display:
+3. Run `./scripts/maint/display_callgraph.py`. It will display:
- the number of functions reachable from each function.
- all strongly-connnected components in the Tor callgraph
- the largest bottlenecks in the largest SCC in the Tor callgraph.
@@ -197,11 +187,11 @@ Note that currently the callgraph generator can't detect calls that pass
through function pointers.
Getting emacs to edit Tor source properly
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+-----------------------------------------
Nick likes to put the following snippet in his .emacs file:
------
+
(add-hook 'c-mode-hook
(lambda ()
(font-lock-mode 1)
@@ -221,9 +211,9 @@ Nick likes to put the following snippet in his .emacs file:
(set-variable 'c-basic-offset 8)
(set-variable 'tab-width 8))
))))
------
-You'll note that it defaults to showing all trailing whitespace. The "cond"
+
+You'll note that it defaults to showing all trailing whitespace. The `cond`
test detects whether the file is one of a few C free software projects that I
often edit, and sets up the indentation level and tab preferences to match
what they want.
@@ -233,26 +223,27 @@ patterns to match where you keep your Tor files.
If you use emacs for editing Tor and nothing else, you could always just say:
------
- (add-hook 'c-mode-hook
- (lambda ()
+
+ (add-hook 'c-mode-hook
+ (lambda ()
(font-lock-mode 1)
(set-variable 'show-trailing-whitespace t)
(set-variable 'indent-tabs-mode nil)
(set-variable 'c-basic-offset 2)))
------
+
There is probably a better way to do this. No, we are probably not going
to clutter the files with emacs stuff.
Doxygen
-~~~~~~~
+-------
We use the 'doxygen' utility to generate documentation from our
source code. Here's how to use it:
1. Begin every file that should be documented with
+
/**
* \file filename.c
* \brief Short description of the file.
@@ -279,24 +270,24 @@ source code. Here's how to use it:
* \endcode
*/
- 3. Make sure to escape the characters "<", ">", "\", "%" and "#" as "\<",
- "\>", "\\", "\%", and "\#".
+ 3. Make sure to escape the characters `<`, `>`, `\`, `%` and `#` as `\<`,
+ `\>`, `\\`, `\%` and `\#`.
4. To document structure members, you can use two forms:
- struct foo {
- /** You can put the comment before an element; */
- int a;
- int b; /**< Or use the less-than symbol to put the comment
+ struct foo {
+ /** You can put the comment before an element; */
+ int a;
+ int b; /**< Or use the less-than symbol to put the comment
* after the element. */
- };
+ };
5. To generate documentation from the Tor source code, type:
- $ doxygen -g
+ $ doxygen -g
- To generate a file called 'Doxyfile'. Edit that file and run
- 'doxygen' to generate the API documentation.
+ to generate a file called `Doxyfile`. Edit that file and run
+ `doxygen` to generate the API documentation.
6. See the Doxygen manual for more information; this summary just
scratches the surface.
diff --git a/doc/HACKING/HowToReview.md b/doc/HACKING/HowToReview.md
index d6b40db..de7891c 100644
--- a/doc/HACKING/HowToReview.md
+++ b/doc/HACKING/HowToReview.md
@@ -15,71 +15,71 @@ Top-level smell-checks
(Difficulty: easy)
-Does it compile with --enable-gcc-warnings?
+- Does it compile with `--enable-gcc-warnings`?
-Does 'make check-spaces' pass?
+- Does `make check-spaces` pass?
-Does it have a reasonable amount of tests? Do they pass? Do they leak
-memory?
+- Does it have a reasonable amount of tests? Do they pass? Do they leak
+ memory?
-Do all the new functions, global variables, types, and structure members have
-documentation?
+- Do all the new functions, global variables, types, and structure members have
+ documentation?
-Do all the functions, global variables, types, and structure members with
-modified behavior have modified documentation?
+- Do all the functions, global variables, types, and structure members with
+ modified behavior have modified documentation?
-Do all the new torrc options have documentation?
+- Do all the new torrc options have documentation?
-If this changes Tor's behavior on the wire, is there a design proposal?
+- If this changes Tor's behavior on the wire, is there a design proposal?
Let's look at the code!
-----------------------
-Does the code conform to CodingStandards.txt?
+- Does the code conform to CodingStandards.txt?
-Does the code leak memory?
+- Does the code leak memory?
-If two or more pointers ever point to the same object, is it clear which
-pointer "owns" the object?
+- If two or more pointers ever point to the same object, is it clear which
+ pointer "owns" the object?
-Are all allocated resources freed?
+- Are all allocated resources freed?
-Are all pointers that should be const, const?
+- Are all pointers that should be const, const?
-Are #defines used for 'magic' numbers?
+- Are `#defines` used for 'magic' numbers?
-Can you understand what the code is trying to do?
+- Can you understand what the code is trying to do?
-Can you convince yourself that the code really does that?
+- Can you convince yourself that the code really does that?
-Is there duplicated code that could be turned into a function?
+- Is there duplicated code that could be turned into a function?
Let's look at the documentation!
--------------------------------
-Does the documentation confirm to CodingStandards.txt?
+- Does the documentation confirm to CodingStandards.txt?
-Does it make sense?
+- Does it make sense?
-Can you predict what the function will do from its documentation?
+- Can you predict what the function will do from its documentation?
Let's think about security!
---------------------------
-If there are any arrays, buffers, are you 100% sure that they cannot
-overflow?
+- If there are any arrays, buffers, are you 100% sure that they cannot
+ overflow?
-If there is any integer math, can it overflow or underflow?
+- If there is any integer math, can it overflow or underflow?
-If there are any allocations, are you sure there are corresponding
-deallocations?
+- If there are any allocations, are you sure there are corresponding
+ deallocations?
-Is there a safer pattern that could be used in any case?
+- Is there a safer pattern that could be used in any case?
-Have they used one of the Forbidden Functions?
+- Have they used one of the Forbidden Functions?
(Also see your favorite secure C programming guides.)
diff --git a/doc/HACKING/README.1st.md b/doc/HACKING/README.1st.md
index a9479de..8299fe6 100644
--- a/doc/HACKING/README.1st.md
+++ b/doc/HACKING/README.1st.md
@@ -5,46 +5,48 @@ In this directory
This directory has helpful information about what you need to know to
hack on Tor!
-First, read 'GettingStarted.md' to learn how to get a start in Tor
+First, read `GettingStarted.md` to learn how to get a start in Tor
development.
-If you've decided to write a patch, 'CodingStandards.txt' will give
+If you've decided to write a patch, `CodingStandards.txt` will give
you a bunch of information about how we structure our code.
-It's important to get code right! Reading 'WritingTests.md' will
+It's important to get code right! Reading `WritingTests.md` will
tell you how to write and run tests in the Tor codebase.
There are a bunch of other programs we use to help maintain and
-develop the codebase: 'HelpfulTools.md' can tell you how to use them
+develop the codebase: `HelpfulTools.md` can tell you how to use them
with Tor.
-If it's your job to put out Tor releases, see 'ReleasingTor.md' so
+If it's your job to put out Tor releases, see `ReleasingTor.md` so
that you don't miss any steps!
-
-----------------------
For full information on how Tor is supposed to work, look at the files in
-https://gitweb.torproject.org/torspec.git/tree
+`https://gitweb.torproject.org/torspec.git/tree`.
For an explanation of how to change Tor's design to work differently, look at
-https://gitweb.torproject.org/torspec.git/blob_plain/HEAD:/proposals/001-process.txt
+`https://gitweb.torproject.org/torspec.git/blob_plain/HEAD:/proposals/001-process.txt`.
For the latest version of the code, get a copy of git, and
- git clone https://git.torproject.org/git/tor
+ git clone https://git.torproject.org/git/tor
-We talk about Tor on the tor-talk mailing list. Design proposals and
-discussion belong on the tor-dev mailing list. We hang around on
+We talk about Tor on the `tor-talk` mailing list. Design proposals and
+discussion belong on the `tor-dev` mailing list. We hang around on
irc.oftc.net, with general discussion happening on #tor and development
-happening on #tor-dev.
+happening on `#tor-dev`.
-The other files in this "HACKING" directory may also be useful as you
+The other files in this `HACKING` directory may also be useful as you
get started working with Tor.
Happy hacking!
+
+-----------------------
+
XXXXX also describe
doc/HACKING/WritingTests.md
diff --git a/doc/HACKING/ReleasingTor.md b/doc/HACKING/ReleasingTor.md
index dcf551b..12a0765 100644
--- a/doc/HACKING/ReleasingTor.md
+++ b/doc/HACKING/ReleasingTor.md
@@ -4,122 +4,126 @@ Putting out a new release
Here are the steps Roger takes when putting out a new Tor release:
-1) Use it for a while, as a client, as a relay, as a hidden service,
-and as a directory authority. See if it has any obvious bugs, and
-resolve those.
+1. Use it for a while, as a client, as a relay, as a hidden service,
+ and as a directory authority. See if it has any obvious bugs, and
+ resolve those.
+
+ As applicable, merge the `maint-X` branch into the `release-X` branch.
-1.5) As applicable, merge the maint-X branch into the release-X branch.
+2. Gather the `changes/*` files into a changelog entry, rewriting many
+ of them and reordering to focus on what users and funders would find
+ interesting and understandable.
-2) Gather the changes/* files into a changelog entry, rewriting many
-of them and reordering to focus on what users and funders would find
-interesting and understandable.
+ 1. Make sure that everything that wants a bug number has one.
+ Make sure that everything which is a bugfix says what version
+ it was a bugfix on.
+
+ 2. Concatenate them.
+
+ 3. Sort them by section. Within each section, sort by "version it's
+ a bugfix on", else by numerical ticket order.
- 2.1) Make sure that everything that wants a bug number has one.
- Make sure that everything which is a bugfix says what version
- it was a bugfix on.
- 2.2) Concatenate them.
- 2.3) Sort them by section. Within each section, sort by "version it's
- a bugfix on", else by numerical ticket order.
+ 4. Clean them up:
- 2.4) Clean them up:
+ Standard idioms:
+ `Fixes bug 9999; bugfix on 0.3.3.3-alpha.`
- Standard idioms:
- "Fixes bug 9999; bugfix on 0.3.3.3-alpha."
+ One space after a period.
- One space after a period.
+ Make stuff very terse
- Make stuff very terse
+ Make sure each section name ends with a colon
- Make sure each section name ends with a colon
+ Describe the user-visible problem right away
- Describe the user-visible problem right away
+ Mention relevant config options by name. If they're rare or unusual,
+ remind people what they're for
- Mention relevant config options by name. If they're rare or unusual,
- remind people what they're for
+ Avoid starting lines with open-paren
- Avoid starting lines with open-paren
+ Present and imperative tense: not past.
- Present and imperative tense: not past.
+ 'Relays', not 'servers' or 'nodes' or 'Tor relays'.
- 'Relays', not 'servers' or 'nodes' or 'Tor relays'.
+ "Stop FOOing", not "Fix a bug where we would FOO".
- "Stop FOOing", not "Fix a bug where we would FOO".
+ Try not to let any given section be longer than about a page. Break up
+ long sections into subsections by some sort of common subtopic. This
+ guideline is especially important when organizing Release Notes for
+ new stable releases.
- Try not to let any given section be longer than about a page. Break up
- long sections into subsections by some sort of common subtopic. This
- guideline is especially important when organizing Release Notes for
- new stable releases.
+ If a given changes stanza showed up in a different release (e.g.
+ maint-0.2.1), be sure to make the stanzas identical (so people can
+ distinguish if these are the same change).
+
+ 5. Merge them in.
- If a given changes stanza showed up in a different release (e.g.
- maint-0.2.1), be sure to make the stanzas identical (so people can
- distinguish if these are the same change).
+ 6. Clean everything one last time.
- 2.5) Merge them in.
+ 7. Run `./scripts/maint/format_changelog.py` to make it prettier.
- 2.6) Clean everything one last time.
+3. Compose a short release blurb to highlight the user-facing
+ changes. Insert said release blurb into the ChangeLog stanza. If it's
+ a stable release, add it to the ReleaseNotes file too. If we're adding
+ to a release-0.2.x branch, manually commit the changelogs to the later
+ git branches too.
- 2.7) Run ./scripts/maint/format_changelog.py to make it prettier.
+4. In `maint-0.2.x`, bump the version number in `configure.ac` and run
+ `scripts/maint/updateVersions.pl` to update version numbers in other
+ places, and commit. Then merge `maint-0.2.x` into `release-0.2.x`.
-3) Compose a short release blurb to highlight the user-facing
-changes. Insert said release blurb into the ChangeLog stanza. If it's
-a stable release, add it to the ReleaseNotes file too. If we're adding
-to a release-0.2.x branch, manually commit the changelogs to the later
-git branches too.
-
-4) In maint-0.2.x, bump the version number in configure.ac and run
- scripts/maint/updateVersions.pl to update version numbers in other
- places, and commit. Then merge maint-0.2.x into release-0.2.x.
-
- (NOTE: To bump the version number, edit configure.ac, and then run
- either make, or 'perl scripts/maint/updateVersions.pl', depending on
+ (NOTE: To bump the version number, edit `configure.ac`, and then run
+ either `make`, or `perl scripts/maint/updateVersions.pl`, depending on
your version.)
-5) Make dist, put the tarball up somewhere, and tell #tor about it. Wait
-a while to see if anybody has problems building it. Try to get Sebastian
-or somebody to try building it on Windows.
-
-6) Get at least two of weasel/arma/Sebastian to put the new version number
-in their approved versions list.
+5. Make dist, put the tarball up somewhere, and tell `#tor` about it. Wait
+ a while to see if anybody has problems building it. Try to get Sebastian
+ or somebody to try building it on Windows.
-7) Sign the tarball, then sign and push the git tag:
- gpg -ba <the_tarball>
- git tag -u <keyid> tor-0.2.x.y-status
- git push origin tag tor-0.2.x.y-status
+6. Get at least two of weasel/arma/Sebastian to put the new version number
+ in their approved versions list.
-8a) scp the tarball and its sig to the dist website, i.e.
-/srv/dist-master.torproject.org/htdocs/ on dist-master. When you want
-it to go live, you run "static-update-component dist.torproject.org"
-on dist-master.
+7. Sign the tarball, then sign and push the git tag:
+
+ gpg -ba <the_tarball>
+ git tag -u <keyid> tor-0.2.x.y-status
+ git push origin tag tor-0.2.x.y-status
-8b) Edit "include/versions.wmi" and "Makefile" to note the new version.
+8. scp the tarball and its sig to the dist website, i.e.
+ `/srv/dist-master.torproject.org/htdocs/` on dist-master. When you want
+ it to go live, you run "static-update-component dist.torproject.org"
+ on dist-master.
+
+ Edit `include/versions.wmi` and `Makefile` to note the new version.
-9) Email the packagers (cc'ing tor-assistants) that a new tarball is up.
+9. Email the packagers (cc'ing tor-assistants) that a new tarball is up.
The current list of packagers is:
- {weasel,gk,mikeperry} at torproject dot org
- {blueness} at gentoo dot org
- {paul} at invizbox dot io
- {ondrej.mikle} at gmail dot com
- {lfleischer} at archlinux dot org
- {tails-dev} at doum dot org
-
-10) Add the version number to Trac. To do this, go to Trac, log in,
-select "Admin" near the top of the screen, then select "Versions" from
-the menu on the left. At the right, there will be an "Add version"
-box. By convention, we enter the version in the form "Tor:
-0.2.2.23-alpha" (or whatever the version is), and we select the date as
-the date in the ChangeLog.
-
-11) Forward-port the ChangeLog.
-
-12) Wait up to a day or two (for a development release), or until most
-packages are up (for a stable release), and mail the release blurb and
-changelog to tor-talk or tor-announce.
-
- (We might be moving to faster announcements, but don't announce until
- the website is at least updated.)
-
-13) If it's a stable release, bump the version number in the maint-x.y.z
- branch to "newversion-dev", and do a "merge -s ours" merge to avoid
- taking that change into master. Do a similar 'merge -s theirs'
+
+ - {weasel,gk,mikeperry} at torproject dot org
+ - {blueness} at gentoo dot org
+ - {paul} at invizbox dot io
+ - {ondrej.mikle} at gmail dot com
+ - {lfleischer} at archlinux dot org
+ - {tails-dev} at doum dot org
+
+10. Add the version number to Trac. To do this, go to Trac, log in,
+ select "Admin" near the top of the screen, then select "Versions" from
+ the menu on the left. At the right, there will be an "Add version"
+ box. By convention, we enter the version in the form "Tor:
+ 0.2.2.23-alpha" (or whatever the version is), and we select the date as
+ the date in the ChangeLog.
+
+11. Forward-port the ChangeLog.
+
+12. Wait up to a day or two (for a development release), or until most
+ packages are up (for a stable release), and mail the release blurb and
+ changelog to tor-talk or tor-announce.
+
+ (We might be moving to faster announcements, but don't announce until
+ the website is at least updated.)
+
+13. If it's a stable release, bump the version number in the `maint-x.y.z`
+ branch to "newversion-dev", and do a `merge -s ours` merge to avoid
+ taking that change into master. Do a similar `merge -s theirs`
merge to get the change (and only that change) into release. (Some
of the build scripts require that maint merge cleanly into release.)
diff --git a/doc/HACKING/WritingTests.md b/doc/HACKING/WritingTests.md
index 2f59c9a..42fba2d 100644
--- a/doc/HACKING/WritingTests.md
+++ b/doc/HACKING/WritingTests.md
@@ -22,92 +22,92 @@ keep from introducing bugs. The major ones are:
How to run these tests
----------------------
-=== The easy version
+### The easy version
-To run all the tests that come bundled with Tor, run "make check"
+To run all the tests that come bundled with Tor, run `make check`.
To run the Stem tests as well, fetch stem from the git repository,
-set STEM_SOURCE_DIR to the checkout, and run "make test-stem".
+set `STEM_SOURCE_DIR` to the checkout, and run `make test-stem`.
To run the Chutney tests as well, fetch chutney from the git repository,
-set CHUTNEY_PATH to the checkout, and run "make test-network".
+set `CHUTNEY_PATH` to the checkout, and run `make test-network`.
-To run all of the above, run "make test-full".
+To run all of the above, run `make test-full`.
To run all of the above, plus tests that require a working connection to the
-internet, run "make test-full-online".
+internet, run `make test-full-online`.
-=== Running particular subtests
+### Running particular subtests
The Tor unit tests are divided into separate programs and a couple of
bundled unit test programs.
Separate programs are easy. For example, to run the memwipe tests in
-isolation, you just run ./src/test/test-memwipe .
+isolation, you just run `./src/test/test-memwipe`.
To run tests within the unit test programs, you can specify the name
of the test. The string ".." can be used as a wildcard at the end of the
test name. For example, to run all the cell format tests, enter
-"./src/test/test cellfmt/..". To run
+`./src/test/test cellfmt/..`. To run
Many tests that need to mess with global state run in forked subprocesses in
order to keep from contaminating one another. But when debugging a failing test,
you might want to run it without forking a subprocess. To do so, use the
-"--no-fork" option with a single test. (If you specify it along with
+`--no-fork` option with a single test. (If you specify it along with
multiple tests, they might interfere.)
-You can turn on logging in the unit tests by passing one of "--debug",
-"--info", "--notice", or "--warn". By default only errors are displayed.
+You can turn on logging in the unit tests by passing one of `--debug`,
+`--info`, `--notice`, or `--warn`. By default only errors are displayed.
-Unit tests are divided into "./src/test/test" and "./src/test/test-slow".
+Unit tests are divided into `./src/test/test` and `./src/test/test-slow`.
The former are those that should finish in a few seconds; the latter tend to
take more time, and may include CPU-intensive operations, deliberate delays,
and stuff like that.
-=== Finding test coverage
+### Finding test coverage
Test coverage is a measurement of which lines your tests actually visit.
-When you configure Tor with the --enable-coverage option, it should
+When you configure Tor with the `--enable-coverage` option, it should
build with support for coverage in the unit tests, and in a special
-"tor-cov" binary.
+`tor-cov` binary.
Then, run the tests you'd like to see coverage from. If you have old
-coverage output, you may need to run "reset-gcov" first.
+coverage output, you may need to run `reset-gcov` first.
Now you've got a bunch of files scattered around your build directories
-called "*.gcda". In order to extract the coverage output from them, make a
-temporary directory for them and run "./scripts/test/coverage ${TMPDIR}",
-where ${TMPDIR} is the temporary directory you made. This will create a
-".gcov" file for each source file under tests, containing that file's source
+called `*.gcda`. In order to extract the coverage output from them, make a
+temporary directory for them and run `./scripts/test/coverage ${TMPDIR}`,
+where `${TMPDIR}` is the temporary directory you made. This will create a
+`.gcov` file for each source file under tests, containing that file's source
annotated with the number of times the tests hit each line. (You'll need to
have gcov installed.)
You can get a summary of the test coverage for each file by running
-"./scripts/test/cov-display ${TMPDIR}/*" . Each line lists the file's name,
+`./scripts/test/cov-display ${TMPDIR}/*` . Each line lists the file's name,
the number of uncovered lines, the number of uncovered lines, and the
coverage percentage.
For a summary of the test coverage for each _function_, run
-"./scripts/test/cov-display -f ${TMPDIR}/*" .
+`./scripts/test/cov-display -f ${TMPDIR}/*`.
-=== Comparing test coverage
+### Comparing test coverage
Sometimes it's useful to compare test coverage for a branch you're writing to
coverage from another branch (such as git master, for example). But you
-can't run "diff" on the two coverage outputs directly, since the actual
+can't run `diff` on the two coverage outputs directly, since the actual
number of times each line is executed aren't so important, and aren't wholly
deterministic.
Instead, follow the instructions above for each branch, creating a separate
-temporary directory for each. Then, run "./scripts/test/cov-diff ${D1}
-${D2}", where D1 and D2 are the directories you want to compare. This will
+temporary directory for each. Then, run `./scripts/test/cov-diff ${D1}
+${D2}`, where D1 and D2 are the directories you want to compare. This will
produce a diff of the two directories, with all lines normalized to be either
covered or uncovered.
To count new or modified uncovered lines in D2, you can run:
- "./scripts/test/cov-diff ${D1} ${D2}" | grep '^+ *\#' |wc -l
+ ./scripts/test/cov-diff ${D1} ${D2}" | grep '^+ *\#' | wc -l
What kinds of test should I write?
@@ -132,18 +132,18 @@ Unit and regression tests: Does this function do what it's supposed to?
Most of Tor's unit tests are made using the "tinytest" testing framework.
You can see a guide to using it in the tinytest manual at
- https://github.com/nmathewson/tinytest/blob/master/tinytest-manual.md
+ https://github.com/nmathewson/tinytest/blob/master/tinytest-manual.md
-To add a new test of this kind, either edit an existing C file in src/test/,
+To add a new test of this kind, either edit an existing C file in `src/test/`,
or create a new C file there. Each test is a single function that must
be indexed in the table at the end of the file. We use the label "done:" as
a cleanup point for all test functions.
-(Make sure you read tinytest-manual.md before proceeding.)
+(Make sure you read `tinytest-manual.md` before proceeding.)
I use the term "unit test" and "regression tests" very sloppily here.
-=== A simple example
+### A simple example
Here's an example of a test function for a simple function in util.c:
@@ -172,20 +172,20 @@ Here's an example of a test function for a simple function in util.c:
This should look pretty familiar to you if you've read the tinytest
manual. One thing to note here is that we use the testing-specific
-function "get_fname" to generate a file with respect to a temporary
+function `get_fname` to generate a file with respect to a temporary
directory that the tests use. You don't need to delete the file;
it will get removed when the tests are done.
-Also note our use of OP_EQ instead of == in the tt_int_op() calls.
-We define OP_* macros to use instead of the binary comparison
+Also note our use of `OP_EQ` instead of `==` in the `tt_int_op()` calls.
+We define `OP_*` macros to use instead of the binary comparison
operators so that analysis tools can more easily parse our code.
-(Coccinelle really hates to see == used as a macro argument.)
+(Coccinelle really hates to see `==` used as a macro argument.)
-Finally, remember that by convention, all *_free() functions that
+Finally, remember that by convention, all `*_free()` functions that
Tor defines are defined to accept NULL harmlessly. Thus, you don't
-need to say "if (contents)" in the cleanup block.
+need to say `if (contents)` in the cleanup block.
-=== Exposing static functions for testing
+### Exposing static functions for testing
Sometimes you need to test a function, but you don't want to expose
it outside its usual module.
@@ -193,20 +193,20 @@ it outside its usual module.
To support this, Tor's build system compiles a testing version of
each module, with extra identifiers exposed. If you want to
declare a function as static but available for testing, use the
-macro "STATIC" instead of "static". Then, make sure there's a
+macro `STATIC` instead of `static`. Then, make sure there's a
macro-protected declaration of the function in the module's header.
-For example, crypto_curve25519.h contains:
+For example, `crypto_curve25519.h` contains:
-#ifdef CRYPTO_CURVE25519_PRIVATE
-STATIC int curve25519_impl(uint8_t *output, const uint8_t *secret,
+ #ifdef CRYPTO_CURVE25519_PRIVATE
+ STATIC int curve25519_impl(uint8_t *output, const uint8_t *secret,
const uint8_t *basepoint);
-#endif
+ #endif
-The crypto_curve25519.c file and the test_crypto.c file both define
-CRYPTO_CURVE25519_PRIVATE, so they can see this declaration.
+The `crypto_curve25519.c` file and the `test_crypto.c` file both define
+`CRYPTO_CURVE25519_PRIVATE`, so they can see this declaration.
-=== Mock functions for testing in isolation
+### Mock functions for testing in isolation
Often we want to test that a function works right, but the function to
be tested depends on other functions whose behavior is hard to observe,
@@ -216,7 +216,7 @@ To write tests for this case, you can replace the underlying functions
with testing stubs while your unit test is running. You need to declare
the underlying function as 'mockable', as follows:
- MOCK_DECL(returntype, functionname, (argument list));
+ MOCK_DECL(returntype, functionname, (argument list));
and then later implement it as:
@@ -229,7 +229,7 @@ For example, if you had a 'connect to remote server' function, you could
declare it as:
- MOCK_DECL(int, connect_to_remote, (const char *name, status_t *status));
+ MOCK_DECL(int, connect_to_remote, (const char *name, status_t *status));
When you declare a function this way, it will be declared as normal in
regular builds, but when the module is built for testing, it is declared
@@ -238,16 +238,16 @@ as a function pointer initialized to the actual implementation.
In your tests, if you want to override the function with a temporary
replacement, you say:
- MOCK(functionname, replacement_function_name);
+ MOCK(functionname, replacement_function_name);
And later, you can restore the original function with:
- UNMOCK(functionname);
+ UNMOCK(functionname);
For more information, see the definitions of this mocking logic in
-testsupport.h.
+`testsupport.h`.
-=== Okay but what should my tests actually do?
+### Okay but what should my tests actually do?
We talk above about "test coverage" -- making sure that your tests visit
every line of code, or every branch of code. But visiting the code isn't
@@ -267,11 +267,11 @@ cases and failure csaes.
For example, consider testing this function:
- /** Remove all elements E from sl such that E==element. Preserve
- * the order of any elements before E, but elements after E can be
- * rearranged.
- */
- void smartlist_remove(smartlist_t *sl, const void *element);
+ /** Remove all elements E from sl such that E==element. Preserve
+ * the order of any elements before E, but elements after E can be
+ * rearranged.
+ */
+ void smartlist_remove(smartlist_t *sl, const void *element);
In order to test it well, you should write tests for at least all of the
following cases. (These would be black-box tests, since we're only looking
@@ -298,19 +298,19 @@ When you consider edge cases, you might try:
Now let's look at the implementation:
- void
- smartlist_remove(smartlist_t *sl, const void *element)
- {
- int i;
- if (element == NULL)
- return;
- for (i=0; i < sl->num_used; i++)
- if (sl->list[i] == element) {
- sl->list[i] = sl->list[--sl->num_used]; /* swap with the end */
- i--; /* so we process the new i'th element */
- sl->list[sl->num_used] = NULL;
- }
- }
+ void
+ smartlist_remove(smartlist_t *sl, const void *element)
+ {
+ int i;
+ if (element == NULL)
+ return;
+ for (i=0; i < sl->num_used; i++)
+ if (sl->list[i] == element) {
+ sl->list[i] = sl->list[--sl->num_used]; /* swap with the end */
+ i--; /* so we process the new i'th element */
+ sl->list[sl->num_used] = NULL;
+ }
+ }
Based on the implementation, we now see three more edge cases to test:
@@ -319,14 +319,14 @@ Based on the implementation, we now see three more edge cases to test:
* Removing an element from a position other than the end of the list.
-=== What should my tests NOT do?
+### What should my tests NOT do?
Tests shouldn't require a network connection.
Whenever possible, tests shouldn't take more than a second. Put the test
into test/slow if it genuinely needs to be run.
-Tests should not alter global state unless they run with TT_FORK: Tests
+Tests should not alter global state unless they run with `TT_FORK`: Tests
should not require other tests to be run before or after them.
Tests should not leak memory or other resources. To find out if your tests
@@ -338,16 +338,16 @@ the test should verify that the documented behavior is implemented, but
should not break if other permissible behavior is later implemented.
-=== Advanced techniques: Namespaces
+### Advanced techniques: Namespaces
Sometimes, when you're doing a lot of mocking at once, it's convenient to
isolate your identifiers within a single namespace. If this were C++, we'd
already have namespaces, but for C, we do the best we can with macros and
token-pasting.
-We have some macros defined for this purpose in src/test/test.h. To use
-them, you define NS_MODULE to a prefix to be used for your identifiers, and
-then use other macros in place of identifier names. See src/test/test.h for
+We have some macros defined for this purpose in `src/test/test.h`. To use
+them, you define `NS_MODULE` to a prefix to be used for your identifiers, and
+then use other macros in place of identifier names. See `src/test/test.h` for
more documentation.
@@ -357,19 +357,19 @@ Integration tests: Calling Tor from the outside
Some tests need to invoke Tor from the outside, and shouldn't run from the
same process as the Tor test program. Reasons for doing this might include:
- * Testing the actual behavior of Tor when run from the command line
- * Testing that a crash-handler correctly logs a stack trace
- * Verifying that violating a sandbox or capability requirement will
- actually crash the program.
- * Needing to run as root in order to test capability inheritance or
- user switching.
+ * Testing the actual behavior of Tor when run from the command line
+ * Testing that a crash-handler correctly logs a stack trace
+ * Verifying that violating a sandbox or capability requirement will
+ actually crash the program.
+ * Needing to run as root in order to test capability inheritance or
+ user switching.
-To add one of these, you generally want a new C program in src/test. Add it
-to TESTS and noinst_PROGRAMS if it can run on its own and return success or
+To add one of these, you generally want a new C program in `src/test`. Add it
+to `TESTS` and `noinst_PROGRAMS` if it can run on its own and return success or
failure. If it needs to be invoked multiple times, or it needs to be
-wrapped, add a new shell script to TESTS, and the new program to
-noinst_PROGRAMS. If you need access to any environment variable from the
-makefile (eg ${PYTHON} for a python interpreter), then make sure that the
+wrapped, add a new shell script to `TESTS`, and the new program to
+`noinst_PROGRAMS`. If you need access to any environment variable from the
+makefile (eg `${PYTHON}` for a python interpreter), then make sure that the
makefile exports them.
Writing integration tests with Stem
@@ -379,25 +379,25 @@ The 'stem' library includes extensive unit tests for the Tor controller
protocol.
For more information on writing new tests for stem, have a look around
-the test/* directory in stem, and find a good example to emulate. You
+the `test/*` directory in stem, and find a good example to emulate. You
might want to start with
-https://gitweb.torproject.org/stem.git/tree/test/integ/control/controller.py
+`https://gitweb.torproject.org/stem.git/tree/test/integ/control/controller.py`
to improve Tor's test coverage.
-You can run stem tests from tor with "make test-stem", or see
-https://stem.torproject.org/faq.html#how-do-i-run-the-tests .
+You can run stem tests from tor with `make test-stem`, or see
+`https://stem.torproject.org/faq.html#how-do-i-run-the-tests`.
System testing with Chutney
---------------------------
The 'chutney' program configures and launches a set of Tor relays,
-authorities, and clients on your local host. It has a 'test network'
+authorities, and clients on your local host. It has a `test network`
functionality to send traffic through them and verify that the traffic
arrives correctly.
-You can write new test networks by adding them to 'networks'. To add
-them to Tor's tests, add them to the test-network or test-network-all
-targets in Makefile.am.
+You can write new test networks by adding them to `networks`. To add
+them to Tor's tests, add them to the `test-network` or `test-network-all`
+targets in `Makefile.am`.
(Adding new kinds of program to chutney will still require hacking the
code.)
More information about the tor-commits
mailing list