[tor-commits] [translation/liveusb-creator_completed] Update translations for liveusb-creator_completed
translation at torproject.org
translation at torproject.org
Thu May 29 20:45:23 UTC 2014
commit 4098d471520774fe157292c7277313e413c32391
Author: Translation commit bot <translation at torproject.org>
Date: Thu May 29 20:45:21 2014 +0000
Update translations for liveusb-creator_completed
---
pl/pl.po | 181 ++++++++++++++++++++++++++++++++------------------------------
1 file changed, 93 insertions(+), 88 deletions(-)
diff --git a/pl/pl.po b/pl/pl.po
index 04963cb..3174c36 100644
--- a/pl/pl.po
+++ b/pl/pl.po
@@ -14,8 +14,8 @@ msgid ""
msgstr ""
"Project-Id-Version: The Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-05-16 18:47+0200\n"
-"PO-Revision-Date: 2014-05-20 22:32+0000\n"
+"POT-Creation-Date: 2014-05-28 16:00+0200\n"
+"PO-Revision-Date: 2014-05-29 20:40+0000\n"
"Last-Translator: sebx\n"
"Language-Team: Polish (http://www.transifex.com/projects/p/torproject/language/pl/)\n"
"MIME-Version: 1.0\n"
@@ -29,22 +29,22 @@ msgstr ""
msgid "%(distribution)s Installer"
msgstr "%(distribution)s Instalator"
-#: ../liveusb/gui.py:808
+#: ../liveusb/gui.py:794
#, python-format
msgid "%(filename)s selected"
msgstr "Wybrano %(filename)s"
-#: ../liveusb/gui.py:439
+#: ../liveusb/gui.py:425
#, python-format
msgid "%(size)s %(label)s"
msgstr "%(size)s %(label)s"
-#: ../liveusb/gui.py:445
+#: ../liveusb/gui.py:431
#, python-format
msgid "%(vendor)s %(model)s (%(details)s) - %(device)s"
msgstr "%(vendor)s %(model)s (%(details)s) - %(device)s"
-#: ../liveusb/creator.py:1021
+#: ../liveusb/creator.py:1046
#, python-format
msgid "%s already bootable"
msgstr "%s jest już startowa"
@@ -101,16 +101,16 @@ msgid ""
"persist after a reboot."
msgstr "Poprzez alokacjÄ dodatkowej przestrzeni na dysku USB dla obszaru trwaÅych danych, można zapisywaÄ dane i dokonywaÄ trwaÅych zmian w dziaÅajÄ
cym systemie.\nBez niego, nie bÄdzie można zapisywaÄ danych, które przetrwajÄ
restart."
-#: ../liveusb/creator.py:1125 ../liveusb/creator.py:1388
+#: ../liveusb/creator.py:1150 ../liveusb/creator.py:1413
#, python-format
msgid "Calculating the SHA1 of %s"
msgstr "Obliczanie sumy kontrolnej SHA1 pliku %s"
-#: ../liveusb/creator.py:1336
+#: ../liveusb/creator.py:1361
msgid "Cannot find"
msgstr "Nie znaleziono"
-#: ../liveusb/creator.py:543
+#: ../liveusb/creator.py:551
#, python-format
msgid "Cannot find device %s"
msgstr "Nie można odnaleÅºÄ urzÄ
dzenia %s"
@@ -129,12 +129,12 @@ msgid ""
"Upgrade"
msgstr "Klonuj\n&&\nAktualizuj"
-#: ../liveusb/creator.py:399
+#: ../liveusb/creator.py:407
#, python-format
msgid "Creating %sMB persistent overlay"
msgstr "Tworzenie %sMB warstw trwaÅych"
-#: ../liveusb/gui.py:567
+#: ../liveusb/gui.py:553
msgid ""
"Device is not yet mounted, so we cannot determine the amount of free space."
msgstr "UrzÄ
dzenie nie jest jeszcze zamontowane, wiÄc nie da siÄ okreÅliÄ iloÅci wolnego miejsca."
@@ -144,11 +144,11 @@ msgstr "UrzÄ
dzenie nie jest jeszcze zamontowane, wiÄc nie da siÄ okreÅliÄ i
msgid "Download %(distribution)s"
msgstr "Pobierz %(distribution)s"
-#: ../liveusb/gui.py:782
+#: ../liveusb/gui.py:768
msgid "Download complete!"
msgstr "Pobieranie ukoÅczone!"
-#: ../liveusb/gui.py:786
+#: ../liveusb/gui.py:772
msgid "Download failed: "
msgstr "Pobieranie nie powiodÅo siÄ: "
@@ -157,45 +157,45 @@ msgstr "Pobieranie nie powiodÅo siÄ: "
msgid "Downloading %s..."
msgstr "Pobieranie %s..."
-#: ../liveusb/creator.py:1121
+#: ../liveusb/creator.py:1146
msgid "Drive is a loopback, skipping MBR reset"
msgstr "NapÄd jest urzÄ
dzeniem loopback, pomijanie przywracania MBR"
-#: ../liveusb/creator.py:814
+#: ../liveusb/creator.py:822
#, python-format
msgid "Entering unmount_device for '%(device)s'"
msgstr "Odmontowywanie urzÄ
dzenia '%(device)s'"
-#: ../liveusb/creator.py:1201
+#: ../liveusb/creator.py:1226
msgid "Error probing device"
msgstr "BÅÄ
d podczas wykrywania urzÄ
dzenia"
-#: ../liveusb/gui.py:227
+#: ../liveusb/gui.py:211
msgid ""
"Error: Cannot set the label or obtain the UUID of your device. Unable to "
"continue."
msgstr "BÅÄ
d: Nie można ustawiÄ etykiety lub uzyskaÄ UUID urzÄ
dzenia. Nie można kontynuowaÄ."
-#: ../liveusb/creator.py:375
+#: ../liveusb/creator.py:383
msgid ""
"Error: The SHA1 of your Live CD is invalid. You can run this program with "
"the --noverify argument to bypass this verification check."
msgstr "BÅÄ
d: suma kontrolna SHA1 obrazu Live CD jest nieprawidÅowa. Można uruchomiÄ ten program za pomocÄ
parametru --noverify, aby obejÅÄ to sprawdzanie."
-#: ../liveusb/creator.py:144
+#: ../liveusb/creator.py:146
msgid "Extracting live image to the target device..."
msgstr "Wypakowywanie obrazu na wybrane urzÄ
dzenie..."
-#: ../liveusb/creator.py:1064
+#: ../liveusb/creator.py:1089
#, python-format
msgid "Formatting %(device)s as FAT32"
msgstr "Formatowanie %(device)s jako FAT32"
-#: ../liveusb/creator.py:139
+#: ../liveusb/creator.py:141
msgid "ISO MD5 checksum passed"
msgstr "Sprawdzenie sumy kontrolnej MD5 pliku ISO powiodÅo siÄ"
-#: ../liveusb/creator.py:137
+#: ../liveusb/creator.py:139
msgid "ISO MD5 checksum verification failed"
msgstr "Sprawdzenie sumy kontrolnej MD5 pliku ISO nie powiodÅo siÄ"
@@ -209,70 +209,70 @@ msgstr "JeÅli nie wybierzesz istniejÄ
cego obrazu ISO Live, wybrane wydanie zos
msgid "Install Tails"
msgstr "Zainstaluj Tails"
-#: ../liveusb/gui.py:630
+#: ../liveusb/gui.py:616
msgid "Installation complete!"
msgstr "ZakoÅczono instalacjÄ!"
-#: ../liveusb/gui.py:279
+#: ../liveusb/gui.py:265
#, python-format
msgid "Installation complete! (%s)"
msgstr "ZakoÅczono instalacjÄ! (%s)"
-#: ../liveusb/gui.py:631
+#: ../liveusb/gui.py:617
msgid "Installation was completed. Press OK to close this program."
msgstr "ZakoÅczono instalacjÄ. NaciÅnij OK aby zamknÄ
Ä ten program."
-#: ../liveusb/creator.py:917 ../liveusb/creator.py:1242
+#: ../liveusb/creator.py:942 ../liveusb/creator.py:1267
msgid "Installing bootloader..."
msgstr "Instalowanie programu startowego..."
-#: ../liveusb/gui.py:284
+#: ../liveusb/gui.py:270
msgid "LiveUSB creation failed!"
msgstr "Utworzenie Live USB nie powiodÅo siÄ."
-#: ../liveusb/creator.py:1337
+#: ../liveusb/creator.py:1362
msgid ""
"Make sure to extract the entire liveusb-creator zip file before running this"
" program."
msgstr "ProszÄ upewniÄ siÄ, że rozpakowano caÅy plik ZIP liveusb-creator przed uruchomieniem tego programu."
-#: ../liveusb/creator.py:1213
+#: ../liveusb/creator.py:1238
msgid ""
"Make sure your USB key is plugged in and formatted with the FAT filesystem"
msgstr "ProszÄ upewniÄ siÄ, że klucz USB jest podÅÄ
czony i sformatowany w systemie plików FAT"
-#: ../liveusb/creator.py:836
+#: ../liveusb/creator.py:844
#, python-format
msgid "Mount %s exists after unmounting"
msgstr "%s istnieje mimo demontowania"
-#: ../liveusb/gui.py:573
+#: ../liveusb/gui.py:559
#, python-format
msgid "No free space on device %(device)s"
msgstr "Brak miejsca na urzÄ
dzeniu %(device)s"
-#: ../liveusb/creator.py:803
+#: ../liveusb/creator.py:811
msgid "No mount points found"
msgstr "Nie znaleziono punktów instalacji"
-#: ../liveusb/creator.py:392
+#: ../liveusb/creator.py:400
msgid "Not enough free space on device."
msgstr "NiewystarczajÄ
ca iloÅÄ wolnego miejsca na urzÄ
dzeniu."
-#: ../liveusb/gui.py:554
+#: ../liveusb/gui.py:540
msgid "Partition is FAT16; Restricting overlay size to 2G"
msgstr "Partycja to FAT16; ograniczanie rozmiaru warstwy do 2G"
-#: ../liveusb/gui.py:550
+#: ../liveusb/gui.py:536
msgid "Partition is FAT32; Restricting overlay size to 4G"
msgstr "Format plików FAT32 ogranicza wielkoÅÄ pliku do 4Gb"
-#: ../liveusb/creator.py:225 ../liveusb/creator.py:843
+#: ../liveusb/creator.py:227 ../liveusb/creator.py:851
#, python-format
msgid "Partitioning device %(device)s"
msgstr "Partycjonowanie urzÄ
dzenia/urzÄ
dzeÅ %(device)s"
-#: ../liveusb/gui.py:621
+#: ../liveusb/gui.py:607
msgid "Persistent Storage"
msgstr "PamiÄÄ trwaÅa"
@@ -280,53 +280,53 @@ msgstr "PamiÄÄ trwaÅa"
msgid "Persistent Storage (0 MB)"
msgstr "Miejsce na trwaÅe dane (0 MB)"
-#: ../liveusb/gui.py:702 ../liveusb/gui.py:731
+#: ../liveusb/gui.py:688 ../liveusb/gui.py:717
msgid "Please confirm your device selection"
msgstr "ProszÄ potwierdziÄ wybór urzÄ
dzenia"
-#: ../liveusb/gui.py:467
+#: ../liveusb/gui.py:453
msgid "Refreshing releases..."
msgstr "OdÅwieżanie wersji..."
-#: ../liveusb/gui.py:472
+#: ../liveusb/gui.py:458
msgid "Releases updated!"
msgstr "Wersje zaktualizowane!"
-#: ../liveusb/creator.py:940 ../liveusb/creator.py:1260
+#: ../liveusb/creator.py:965 ../liveusb/creator.py:1285
#, python-format
msgid "Removing %(file)s"
msgstr "Usuwanie %(file)s"
-#: ../liveusb/creator.py:470
+#: ../liveusb/creator.py:478
msgid "Removing existing Live OS"
msgstr "Usuwanie istniejÄ
cego systemu operacyjnego Live"
-#: ../liveusb/creator.py:1115
+#: ../liveusb/creator.py:1140
#, python-format
msgid "Resetting Master Boot Record of %s"
msgstr "Reset gÅównego sektora startowego %s"
-#: ../liveusb/gui.py:793
+#: ../liveusb/gui.py:779
msgid "Select Live ISO"
msgstr "Wybór pliku ISO obrazu Live"
-#: ../liveusb/creator.py:181
+#: ../liveusb/creator.py:183
msgid "Setting up OLPC boot file..."
msgstr "Ustawianie pliku startowego OLPC..."
-#: ../liveusb/creator.py:717
+#: ../liveusb/creator.py:725
#, python-format
msgid ""
"Some partitions of the target device %(device)s are mounted. They will be "
"unmounted before starting the installation process."
msgstr "Niektóre partycje na wybranym przez Ciebie urzÄ
dzeniu %(device)s sÄ
zamontowane. ZostanÄ
one odÅÄ
czone przed zaczÄciem procesu instalacji."
-#: ../liveusb/creator.py:130
+#: ../liveusb/creator.py:132
msgid ""
"Source type does not support verification of ISO MD5 checksum, skipping"
msgstr "Typ źródÅowy nie umożliwia weryfikacji sumy kontrolnej ISO MD5, zostanie ona pominiÄta"
-#: ../liveusb/creator.py:1149
+#: ../liveusb/creator.py:1174
msgid "Synchronizing data on disk..."
msgstr "Synchronizowanie danych na dysku..."
@@ -334,19 +334,19 @@ msgstr "Synchronizowanie danych na dysku..."
msgid "Target Device"
msgstr "UrzÄ
dzenie docelowe"
-#: ../liveusb/gui.py:667
+#: ../liveusb/gui.py:653
msgid ""
"The Master Boot Record on your device is blank. Pressing 'Install Tails' "
"again will reset the MBR on this device."
msgstr "Master Boot Record na Twoim urzÄ
dzeniu jest pusty. Ponowne naciÅniÄcie przycisku \"Zainstaluj Tails\" zresetuje MBR na tym urzÄ
dzeniu."
-#: ../liveusb/gui.py:796
+#: ../liveusb/gui.py:782
msgid ""
"The selected file is unreadable. Please fix its permissions or select "
"another file."
msgstr "Nie można odczytaÄ wybranego pliku. ProszÄ poprawiÄ prawa dostÄpu do niego lub wybraÄ inny plik."
-#: ../liveusb/creator.py:336
+#: ../liveusb/creator.py:344
#, python-format
msgid ""
"There was a problem executing the following command: `%(command)s`.\n"
@@ -384,87 +384,87 @@ msgstr "To jest pasek postÄpu, który bÄdzie wskazywaÅ, na jakim etapie proce
msgid "This is the status console, where all messages get written to."
msgstr "To jest konsola stanu, gdzie zapisywane sÄ
wszystkie komunikaty."
-#: ../liveusb/creator.py:880
+#: ../liveusb/creator.py:905
msgid "Trying to continue anyway."
msgstr "Próbujemy kontynuowaÄ."
-#: ../liveusb/creator.py:912
+#: ../liveusb/creator.py:937
#, python-format
msgid "Unable to change volume label: %(message)s"
msgstr "Nie można zmieniÄ etykiety: %(message)s"
-#: ../liveusb/creator.py:479 ../liveusb/creator.py:490
+#: ../liveusb/creator.py:487 ../liveusb/creator.py:498
#, python-format
msgid "Unable to chmod %(file)s: %(message)s"
msgstr "Nie można zmieniÄ praw dostÄpu do %(file)s: %(message)s"
-#: ../liveusb/creator.py:460
+#: ../liveusb/creator.py:468
#, python-format
msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
msgstr "Nie udaÅo siÄ skopiowaÄ %(infile)s do %(outfile)s: %(message)s"
-#: ../liveusb/gui.py:418
+#: ../liveusb/gui.py:404
msgid "Unable to find any USB drive"
msgstr "Nie można znaleÅºÄ Å¼adnego dysku USB"
-#: ../liveusb/creator.py:1203
+#: ../liveusb/creator.py:1228
msgid "Unable to find any supported device"
msgstr "Nie można znaleÅºÄ Å¼adnego obsÅugiwanego urzÄ
dzenia"
-#: ../liveusb/creator.py:1041
+#: ../liveusb/creator.py:1066
msgid "Unable to find partition"
msgstr "Nie można odnaleÅºÄ partycji"
-#: ../liveusb/creator.py:1283
+#: ../liveusb/creator.py:1308
msgid ""
"Unable to get Win32_LogicalDisk; win32com query did not return any results"
msgstr "Nie można uzyskaÄ Win32_LogicalDisk; zapytanie win32com nie zwróciÅo żadnych wyników"
-#: ../liveusb/gui.py:695
+#: ../liveusb/gui.py:681
msgid "Unable to mount device"
msgstr "Nie można zamontowaÄ urzÄ
dzenia"
-#: ../liveusb/creator.py:791
+#: ../liveusb/creator.py:799
#, python-format
msgid "Unable to mount device: %(message)s"
msgstr "Nie można zamontowaÄ urzÄ
dzenia: %(message)s"
-#: ../liveusb/creator.py:495
+#: ../liveusb/creator.py:503
#, python-format
msgid "Unable to remove directory from previous LiveOS: %(message)s"
msgstr "Nie można usunÄ
Ä katalogu poprzedniego systemu operacyjnego Live: %(message)s"
-#: ../liveusb/creator.py:483
+#: ../liveusb/creator.py:491
#, python-format
msgid "Unable to remove file from previous LiveOS: %(message)s"
msgstr "Nie można usunÄ
Ä poprzedniego systemu operacyjnego Live: %(message)s"
-#: ../liveusb/creator.py:1118
+#: ../liveusb/creator.py:1143
msgid ""
"Unable to reset MBR. You may not have the `syslinux` package installed."
msgstr "Nie można zresetowaÄ gÅównego sektora startowego (MBR). ByÄ może nie masz zainstalowanej paczki `syslinux`."
-#: ../liveusb/gui.py:802
+#: ../liveusb/gui.py:788
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
msgstr "Nie można użyÄ wybranego pliku. Åatwiej bÄdzie po przeniesieniu pliku ISO do gÅównego katalogu napÄdu (np. C:\\)"
-#: ../liveusb/creator.py:698
+#: ../liveusb/creator.py:706
#, python-format
msgid "Unable to write on %(device)s, skipping."
msgstr "Nie można zapisaÄ na %(device)s, pomijam"
-#: ../liveusb/creator.py:381
+#: ../liveusb/creator.py:389
msgid "Unknown ISO, skipping checksum verification"
msgstr "Nieznany plik ISO, pomijanie sprawdzania sum kontrolnych"
-#: ../liveusb/creator.py:787
+#: ../liveusb/creator.py:795
#, python-format
msgid "Unknown dbus exception while trying to mount device: %(message)s"
msgstr "Nieznany wyjÄ
tek dbus podczas montowania urzÄ
dzenia: %(message)s"
-#: ../liveusb/creator.py:766 ../liveusb/creator.py:891
+#: ../liveusb/creator.py:774 ../liveusb/creator.py:916
msgid "Unknown filesystem. Your device may need to be reformatted."
msgstr "Nieznany system plików. UrzÄ
dzenie może wymagaÄ ponownego sformatowania."
@@ -473,40 +473,45 @@ msgstr "Nieznany system plików. UrzÄ
dzenie może wymagaÄ ponownego sformatowa
msgid "Unknown release: %s"
msgstr "Nieznane wydanie: %s"
-#: ../liveusb/creator.py:828
+#: ../liveusb/creator.py:836
#, python-format
msgid "Unmounting '%(udi)s' on '%(device)s'"
msgstr "Odmontowywanie '%(udi)s' z '%(device)s'"
-#: ../liveusb/creator.py:824
+#: ../liveusb/creator.py:832
#, python-format
msgid "Unmounting mounted filesystems on '%(device)s'"
msgstr "Odmontowywanie systemów plików na '%(device)s'"
-#: ../liveusb/creator.py:877
+#: ../liveusb/creator.py:902
#, python-format
msgid "Unsupported device '%(device)s', please report a bug."
msgstr "NieobsÅugiwane urzÄ
dzenie '%(device)s', proszÄ zgÅosiÄ bÅÄ
d."
-#: ../liveusb/creator.py:771 ../liveusb/creator.py:894
+#: ../liveusb/creator.py:779 ../liveusb/creator.py:919
#, python-format
msgid "Unsupported filesystem: %s"
msgstr "NieobsÅugiwany system plików: %s"
-#: ../liveusb/creator.py:769
+#: ../liveusb/creator.py:777
#, python-format
msgid ""
"Unsupported filesystem: %s\n"
"In case you are trying to upgrade a manually installed Tails system (that is, if it was installed without this installer), this option is not supported: you need to install it anew to start with, e.g. by choosing the \"Clone & Install\" action instead."
msgstr "NieobsÅugiwany system plików: %s\nJeÅli próbujesz zaktualizowaÄ rÄcznie zainstalowany system Tails (taki, który nie zostaÅ zainstalowany tym instalatorem), to nie jest to obsÅugiwane: na poczÄ
tek musisz zainstalowaÄ go od nowa, np. wybierajÄ
c opcjÄ \"Klonuj i Instaluj\""
-#: ../liveusb/creator.py:1216
+#: ../liveusb/creator.py:1241
#, python-format
msgid ""
"Unsupported filesystem: %s\n"
"Please backup and format your USB key with the FAT filesystem."
msgstr "NieobsÅugiwany system plików: %s\nProszÄ wykonaÄ kopiÄ zapasowÄ
i sformatowaÄ klucz USB w systemie plików FAT."
+#: ../liveusb/creator.py:877
+#, python-format
+msgid "Updating properties of system partition %(system_partition)s"
+msgstr "Aktualizowanie wÅaÅciwoÅci partycji systemowej %(system_partition)s"
+
#: ../liveusb/launcher_ui.py:163
msgid "Upgrade from ISO"
msgstr "Aktualizacja z obrazu ISO"
@@ -515,54 +520,54 @@ msgstr "Aktualizacja z obrazu ISO"
msgid "Use existing Live system ISO"
msgstr "Użyj istniejÄ
cego obrazu ISO systemu Live"
-#: ../liveusb/creator.py:132
+#: ../liveusb/creator.py:134
msgid "Verifying ISO MD5 checksum"
msgstr "Sprawdzanie sumy kontrolnej MD5 pliku ISO"
-#: ../liveusb/creator.py:355
+#: ../liveusb/creator.py:363
msgid "Verifying SHA1 checksum of LiveCD image..."
msgstr "Sprawdzanie sumy kontrolnej SHA1 obrazu LiveCD..."
-#: ../liveusb/creator.py:359
+#: ../liveusb/creator.py:367
msgid "Verifying SHA256 checksum of LiveCD image..."
msgstr "Sprawdzanie sumy kontrolnej SHA256 obrazu LiveCD..."
-#: ../liveusb/creator.py:888 ../liveusb/creator.py:1209
+#: ../liveusb/creator.py:913 ../liveusb/creator.py:1234
msgid "Verifying filesystem..."
msgstr "Sprawdzanie systemu plików..."
-#: ../liveusb/gui.py:729
+#: ../liveusb/gui.py:715
msgid ""
"Warning: Creating a new persistent overlay will delete your existing one."
msgstr "Ostrzeżenie: utworzenie nowej warstwy trwaÅoÅci usunie istniejÄ
cÄ
."
-#: ../liveusb/gui.py:681
+#: ../liveusb/gui.py:667
msgid ""
"Warning: The Master Boot Record on your device does not match your system's "
"syslinux MBR. If you have trouble booting this stick, try running the "
"liveusb-creator with the --reset-mbr option."
msgstr "Ostrzeżenie: gÅówny sektor startowy (MBR) na urzÄ
dzeniu nie zgadza siÄ z MBR syslinuxa systemu. JeÅli podczas uruchamiania tego dysku wystÄ
piÅ bÅÄ
d, proszÄ spróbowaÄ uruchomiÄ liveusb-creator za pomocÄ
opcji --reset-mbr."
-#: ../liveusb/gui.py:392
+#: ../liveusb/gui.py:378
msgid ""
"Warning: This tool needs to be run as an Administrator. To do this, right "
"click on the icon and open the Properties. Under the Compatibility tab, "
"check the \"Run this program as an administrator\" box."
msgstr "Ostrzeżenie: to narzÄdzie musi byÄ uruchomione jako administrator. Aby to zrobiÄ, należy nacisnÄ
Ä prawym przyciskiem myszy ikonÄ i otworzyÄ WÅaÅciwoÅci. W karcie ZgodnoÅÄ należy zaznaczyÄ pole wyboru \"Uruchom ten program jako administrator\"."
-#: ../liveusb/creator.py:151
+#: ../liveusb/creator.py:153
#, python-format
msgid "Wrote to device at %(speed)d MB/sec"
msgstr "Dokonano zapisu na urzÄ
dzeniu z prÄdkoÅciÄ
%(speed)d MB/sec"
-#: ../liveusb/gui.py:703
+#: ../liveusb/gui.py:689
#, python-format
msgid ""
"You are going to install Tails on the %(size)s %(vendor)s %(model)s device "
"(%(device)s). All data on the selected device will be lost. Continue?"
msgstr "Zamierzasz zainstalowaÄ Tails na %(size)s %(vendor)s %(model)s urzÄ
dzenie (%(device)s). Wszystkie dane na tym noÅniku zostanÄ
utracone. KontynuowaÄ?"
-#: ../liveusb/gui.py:719
+#: ../liveusb/gui.py:705
#, python-format
msgid ""
"You are going to upgrade Tails on the %(parent_size)s %(vendor)s %(model)s "
@@ -570,17 +575,17 @@ msgid ""
"unchanged. Continue?"
msgstr "Zamierzasz uaktualniÄ Tails na %(parent_size)s %(vendor)s %(model)s urzÄ
dzenie (%(device)s). ObjÄtoÅÄ tego urzÄ
dzenia pozostanie niezmieniona. KontynuowaÄ?"
-#: ../liveusb/creator.py:605
+#: ../liveusb/creator.py:613
msgid ""
"You are using an old version of syslinux-extlinux that does not support the "
"ext4 filesystem"
msgstr "Używasz starej wersji syslinux-extlinux która nie obsÅuguje systemu plików ext4"
-#: ../liveusb/gui.py:787
+#: ../liveusb/gui.py:773
msgid "You can try again to resume your download"
msgstr "Możesz spróbowaÄ ponownie, aby wznowiÄ pobieranie"
-#: ../liveusb/creator.py:91
+#: ../liveusb/creator.py:93
msgid "You must run this application as root"
msgstr "TÄ aplikacjÄ można uruchomiÄ tylko jako root"
More information about the tor-commits
mailing list