[tor-commits] [tor/master] Remove the unused torrc.bridge.in. Bug 5622.

nickm at torproject.org nickm at torproject.org
Mon May 14 16:40:40 UTC 2012 

commit f1fca8aa4d5fd62e6456a0cad6be613b37579583
Author: Nick Mathewson <nickm at torproject.org>
Date:   Mon May 14 12:37:39 2012 -0400

    Remove the unused torrc.bridge.in. Bug 5622.
---
 changes/bug5622            |    4 +
 src/config/torrc.bridge.in |  175 --------------------------------------------
 2 files changed, 4 insertions(+), 175 deletions(-)

diff --git a/changes/bug5622 b/changes/bug5622
new file mode 100644
index 0000000..82b8e76
--- /dev/null
+++ b/changes/bug5622
@@ -0,0 +1,4 @@
+  o Removed files:
+    - Remove the torrc.bridge file: we don't use it for anything, and
+      it had become badly desynchronized from torrc.sample.  Resolves
+      bug 5622.
\ No newline at end of file
diff --git a/src/config/torrc.bridge.in b/src/config/torrc.bridge.in
deleted file mode 100644
index b7b7e05..0000000
--- a/src/config/torrc.bridge.in
+++ /dev/null
@@ -1,175 +0,0 @@
-## Configuration file for a typical Tor user
-## Last updated 16 July 2009 for Tor 0.2.2.1-alpha.
-## (May or may not work for much older or much newer versions of Tor.)
-##
-## Lines that begin with "## " try to explain what's going on. Lines
-## that begin with just "#" are disabled commands: you can enable them
-## by removing the "#" symbol.
-##
-## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
-## for more options you can use in this file.
-##
-## Tor will look for this file in various places based on your platform:
-## https://www.torproject.org/docs/faq#torrc
-
-
-## Replace this with "SocksPort 0" if you plan to run Tor only as a
-## relay, and not make any local application connections yourself.
-SocksPort 9050 # what port to open for local application connections
-SocksListenAddress 127.0.0.1 # accept connections only from localhost
-#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also
-
-## Entry policies to allow/deny SOCKS requests based on IP address.
-## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests from SocksListenAddress.
-#SocksPolicy accept 192.168.0.0/16
-#SocksPolicy reject *
-
-## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many Log lines as
-## you want.
-##
-## We advise using "notice" in most cases, since anything more verbose
-## may provide sensitive information to an attacker who obtains the logs.
-##
-## Send all messages of level 'notice' or higher to @LOCALSTATEDIR@/log/tor/notices.log
-#Log notice file @LOCALSTATEDIR@/log/tor/notices.log
-## Send every possible message to @LOCALSTATEDIR@/log/tor/debug.log
-#Log debug file @LOCALSTATEDIR@/log/tor/debug.log
-## Use the system log instead of Tor's logfiles
-#Log notice syslog
-## To send all messages to stderr:
-#Log debug stderr
-
-## Uncomment this to start the process in the background... or use
-## --runasdaemon 1 on the command line. This is ignored on Windows;
-## see the FAQ entry if you want Tor to run as an NT service.
-#RunAsDaemon 1
-
-## The directory for keeping all the keys/etc. By default, we store
-## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
-#DataDirectory @LOCALSTATEDIR@/lib/tor
-
-## The port on which Tor will listen for local connections from Tor
-## controller applications, as documented in control-spec.txt.
-#ControlPort 9051
-## If you enable the controlport, be sure to enable one of these
-## authentication methods, to prevent attackers from accessing it.
-#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
-#CookieAuthentication 1
-
-############### This section is just for location-hidden services ###
-
-## Once you have configured a hidden service, you can look at the
-## contents of the file ".../hidden_service/hostname" for the address
-## to tell people.
-##
-## HiddenServicePort x y:z says to redirect requests on port x to the
-## address y:z.
-
-#HiddenServiceDir @LOCALSTATEDIR@/lib/tor/hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-
-#HiddenServiceDir @LOCALSTATEDIR@/lib/tor/other_hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-#HiddenServicePort 22 127.0.0.1:22
-
-################ This section is just for relays #####################
-#
-## See https://www.torproject.org/docs/tor-doc-relay for details.
-
-## Required: what port to advertise for incoming Tor connections.
-ORPort 9001
-## If you want to listen on a port other than the one advertised
-## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the
-## line below too. You'll need to do ipchains or other port forwarding
-## yourself to make this work.
-#ORListenAddress 0.0.0.0:9090
-
-## A handle for your relay, so people don't have to refer to it by key.
-Nickname Unnamed
-
-## The IP address or full DNS name for your relay. Leave commented out
-## and Tor will guess.
-#Address noname.example.com
-
-## Define these to limit how much relayed traffic you will allow. Your
-## own traffic is still unthrottled. Note that RelayBandwidthRate must
-## be at least 20 KB.
-## Note that units for these config options are bytes per second, not bits
-## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
-#RelayBandwidthRate 100 KB  # Throttle traffic to 100KB/s (800Kbps)
-#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
-RelayBandwidthBurst 10485760
-RelayBandwidthRate 5242880
-
-## Use these to restrict the maximum traffic per day, week, or month.
-## Note that this threshold applies to sent _and_ to received bytes,
-## not to their sum: Setting "4 GB" may allow up to 8 GB
-## total before hibernating.
-##
-## Set a maximum of 4 gigabytes each way per period.
-#AccountingMax 4 GB
-## Each period starts daily at midnight (AccountingMax is per day)
-#AccountingStart day 00:00
-## Each period starts on the 3rd of the month at 15:00 (AccountingMax
-## is per month)
-#AccountingStart month 3 15:00
-
-## Contact info to be published in the directory, so we can contact you
-## if your relay is misconfigured or something else goes wrong. Google
-## indexes this, so spammers might also collect it.
-#ContactInfo Random Person <nobody AT example dot com>
-## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
-
-## Uncomment this to mirror directory information for others. Please do
-## if you have enough bandwidth.
-DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised
-## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line
-## below too. You'll need to do ipchains or other port forwarding yourself
-## to make this work.
-#DirListenAddress 0.0.0.0:9091
-## Uncomment to return an arbitrary blob of html on your DirPort. Now you
-## can explain what Tor is if anybody wonders why your IP address is
-## contacting them. See contrib/tor-exit-notice.html in Tor's source
-## distribution for a sample.
-#DirPortFrontPage @CONFDIR@/tor-exit-notice.html
-
-## Uncomment this if you run more than one Tor relay, and add the identity
-## key fingerprint of each Tor relay you control, even if they're on
-## different networks. You declare it here so Tor clients can avoid
-## using more than one of your relays in a single circuit. See
-## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers
-## However, you should never include a bridge's fingerprint here, as it would
-## break its concealability and potentionally reveal its IP/TCP address.
-#MyFamily $keyid,$keyid,...
-
-## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to _replace_
-## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
-## default exit policy. Leave commented to just use the default, which is
-## described in the man page or at
-## https://www.torproject.org/documentation.html
-##
-## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
-## for issues you might encounter if you use the default exit policy.
-##
-## If certain IPs and ports are blocked externally, e.g. by your firewall,
-## you should update your exit policy to reflect this -- otherwise Tor
-## users will be told that those destinations are down.
-##
-#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
-#ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # no exits allowed
-#
-## Bridge relays (or "bridges") are Tor relays that aren't listed in the
-## main directory. Since there is no complete public list of them, even if an
-## ISP is filtering connections to all the known Tor relays, they probably
-## won't be able to block all the bridges. Also, websites won't treat you
-## differently because they won't know you're running Tor. If you can
-## be a real relay, please do; but if not, be a bridge!
-BridgeRelay 1
-ExitPolicy reject *:*

More information about the tor-commits mailing list