[or-cvs] [tor/release-0.2.1 5/8] close idle dir-fetch circs early

arma at torproject.org arma at torproject.org
Sun May 2 22:00:30 UTC 2010


Author: Roger Dingledine <arma at torproject.org>
Date: Fri, 23 Apr 2010 18:35:11 -0400
Subject: close idle dir-fetch circs early
Commit: cb31978adb3d92d304df0c2a408d9f5f75891667

---
 changes/close_begindir_circs |    7 +++++
 src/or/circuituse.c          |   53 +++++++++++++++++++++++++++++++++++++++--
 src/or/main.c                |    4 +++
 src/or/or.h                  |    2 +
 4 files changed, 63 insertions(+), 3 deletions(-)
 create mode 100644 changes/close_begindir_circs

diff --git a/changes/close_begindir_circs b/changes/close_begindir_circs
new file mode 100644
index 0000000..3b1ee87
--- /dev/null
+++ b/changes/close_begindir_circs
@@ -0,0 +1,7 @@
+  o Major bugfixes:
+    - Relays now close idle circuits early if it looks like they were
+      intended for directory fetches. Such circuits are unlikely to
+      be re-used, and tens of thousands of them were piling up at the
+      fast relays, causing the relays to run out of sockets and memory.
+      Bugfix on 0.2.0.22-rc (where clients started tunneling their
+      directory fetches over TLS).
diff --git a/src/or/circuituse.c b/src/or/circuituse.c
index 6ae2769..827c4bb 100644
--- a/src/or/circuituse.c
+++ b/src/or/circuituse.c
@@ -17,7 +17,7 @@ extern circuit_t *global_circuitlist; /* from circuitlist.c */
 
 /********* END VARIABLES ************/
 
-static void circuit_expire_old_circuits(time_t now);
+static void circuit_expire_old_circuits_clientside(time_t now);
 static void circuit_increment_failure_count(void);
 
 /** Return 1 if <b>circ</b> could be returned by circuit_get_best().
@@ -544,7 +544,7 @@ circuit_build_needed_circs(time_t now)
     time_to_new_circuit = now + options->NewCircuitPeriod;
     if (proxy_mode(get_options()))
       addressmap_clean(now);
-    circuit_expire_old_circuits(now);
+    circuit_expire_old_circuits_clientside(now);
 
 #if 0 /* disable for now, until predict-and-launch-new can cull leftovers */
     circ = circuit_get_youngest_clean_open(CIRCUIT_PURPOSE_C_GENERAL);
@@ -628,7 +628,7 @@ circuit_detach_stream(circuit_t *circ, edge_connection_t *conn)
  * for too long and has no streams on it: mark it for close.
  */
 static void
-circuit_expire_old_circuits(time_t now)
+circuit_expire_old_circuits_clientside(time_t now)
 {
   circuit_t *circ;
   time_t cutoff = now - get_options()->CircuitIdleTimeout;
@@ -660,6 +660,53 @@ circuit_expire_old_circuits(time_t now)
   }
 }
 
+/** How long do we wait before killing circuits with the properties
+ * described below?
+ *
+ * Probably we could choose a number here as low as 5 to 10 seconds,
+ * since these circs are used for begindir, and a) generally you either
+ * ask another begindir question right after or you don't for a long time,
+ * b) clients at least through 0.2.1.x choose from the whole set of
+ * directory mirrors at each choice, and c) re-establishing a one-hop
+ * circuit via create-fast is a light operation assuming the TLS conn is
+ * still there.
+ *
+ * I expect "b" to go away one day when we move to using directory
+ * guards, but I think "a" and "c" are good enough reasons that a low
+ * number is safe even then.
+ */
+#define IDLE_ONE_HOP_CIRC_TIMEOUT 60
+
+/** Find each non-origin circuit that has been unused for too long,
+ * has no streams on it, used a create_fast, and ends here: mark it
+ * for close.
+ */
+void
+circuit_expire_old_circuits_serverside(time_t now)
+{
+  circuit_t *circ;
+  or_circuit_t *or_circ;
+  time_t cutoff = now - IDLE_ONE_HOP_CIRC_TIMEOUT;
+
+  for (circ = global_circuitlist; circ; circ = circ->next) {
+    if (circ->marked_for_close || CIRCUIT_IS_ORIGIN(circ))
+      continue;
+    or_circ = TO_OR_CIRCUIT(circ);
+    /* If the circuit has been idle for too long, and there are no streams
+     * on it, and it ends here, and it used a create_fast, mark it for close.
+     */
+    if (or_circ->is_first_hop && !circ->n_conn &&
+        !or_circ->n_streams && !or_circ->resolving_streams &&
+        or_circ->p_conn &&
+        or_circ->p_conn->timestamp_last_added_nonpadding <= cutoff) {
+      log_info(LD_CIRC, "Closing circ_id %d (empty %d secs ago)",
+               or_circ->p_circ_id,
+               (int)(now - or_circ->p_conn->timestamp_last_added_nonpadding));
+      circuit_mark_for_close(circ, END_CIRC_REASON_FINISHED);
+    }
+  }
+}
+
 /** Number of testing circuits we want open before testing our bandwidth. */
 #define NUM_PARALLEL_TESTING_CIRCS 4
 
diff --git a/src/or/main.c b/src/or/main.c
index 9b57ce8..04364bb 100644
--- a/src/or/main.c
+++ b/src/or/main.c
@@ -1058,6 +1058,10 @@ run_scheduled_events(time_t now)
   if (have_dir_info && !we_are_hibernating())
     circuit_build_needed_circs(now);
 
+  /* every 10 seconds, but not at the same second as other such events */
+  if (now % 10 == 5)
+    circuit_expire_old_circuits_serverside(now);
+
   /** 5. We do housekeeping for each connection... */
   connection_or_set_bad_connections();
   for (i=0;i<smartlist_len(connection_array);i++) {
diff --git a/src/or/or.h b/src/or/or.h
index 74ab7e7..97f94d0 100644
--- a/src/or/or.h
+++ b/src/or/or.h
@@ -2834,6 +2834,8 @@ int circuit_conforms_to_options(const origin_circuit_t *circ,
 void circuit_build_needed_circs(time_t now);
 void circuit_detach_stream(circuit_t *circ, edge_connection_t *conn);
 
+void circuit_expire_old_circuits_serverside(time_t now);
+
 void reset_bandwidth_test(void);
 int circuit_enough_testing_circs(void);
 
-- 
1.6.5




More information about the tor-commits mailing list