[or-cvs] r20547: {projects} Commit grsec and selinux prep work and configs. (in projects/misc-sysadmin: . kernel kernel/initrd kernel/vmware)

mikeperry at seul.org mikeperry at seul.org
Sun Sep 13 13:56:52 UTC 2009


Author: mikeperry
Date: 2009-09-13 09:56:52 -0400 (Sun, 13 Sep 2009)
New Revision: 20547

Added:
   projects/misc-sysadmin/grsec-prep.sh
   projects/misc-sysadmin/kernel/
   projects/misc-sysadmin/kernel/fstab
   projects/misc-sysadmin/kernel/grub.conf
   projects/misc-sysadmin/kernel/initrd-2.6.29.6-grsec-fc-nrl2.img
   projects/misc-sysadmin/kernel/initrd/
   projects/misc-sysadmin/kernel/initrd/init
   projects/misc-sysadmin/kernel/kernel-2.6.29.6-grsec-fc-vmware64.config
   projects/misc-sysadmin/kernel/selinux
   projects/misc-sysadmin/kernel/vmware/
   projects/misc-sysadmin/kernel/vmware/vmware-tools
   projects/misc-sysadmin/kernel/vmware/vmware-tools-patched.tgz
   projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz
   projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz.sig
Modified:
   projects/misc-sysadmin/00_CAPTAINS.LOG
Log:

Commit grsec and selinux prep work and configs.



Modified: projects/misc-sysadmin/00_CAPTAINS.LOG
===================================================================
--- projects/misc-sysadmin/00_CAPTAINS.LOG	2009-09-13 12:30:58 UTC (rev 20546)
+++ projects/misc-sysadmin/00_CAPTAINS.LOG	2009-09-13 13:56:52 UTC (rev 20547)
@@ -13,7 +13,36 @@
    /sbin/chkconfig --level 3 yum-cron on
  - Installed EPEL repository via:
    http://download.fedora.redhat.com/pub/epel/5Server/x86_64/epel-release-5-3.noarch.rpm
+ - Created+applied grsec-prep.sh based on selinux and grsec work
 
+SELinux:
+ - Enabled selinux targeted policy via /etc/sysconfig/selinux
+ - /usr/sbin/genhomedircon && /sbin/fixfiles relabel
+
+GRsec + Misc Kernel Work:
+ - Used grsec config in kernel/kernel-2.6.29.6-grsec-fc-vmware64.config
+ - Remove RedHat-Specific LABEL= partition table format
+   - Edited /etc/fstab to remove label refernces. 
+   - Edited /etc/grub.conf to remove label references and enable serial console
+ - Boot into properly root= set kernel before doing 'make install' to get
+   root= set right
+ - Patched LSILogic SCSI driver (prob not needed)
+   - http://communities.vmware.com/thread/87702;jsessionid=393012D554F4BB0F6BB9704E12E7B159
+ - Made a custom initrd that does a forced mknod /dev/sda
+   - see kernel/initrd/init in this repository. Then do:
+     gzip -cd /boot/initrd-2.6.29.6-grsec-fc-nrl.img | cpio -idv
+     cp misc-sysadmin/initrd/init ./
+     find . -print | cpio -H newc -o | gzip -9 > /boot/initrd-2.6.29.6-grsec-fc-nrl.img 
+ - Patched vmware tools source code using:
+   http://communities.vmware.com/thread/203749
+   - Patched copy is in kernel/vmware-tools-patched.tgz
+ - Edited /etc/rc.d/init.d/vmware-tools to call
+   ${vmdb_answer_BINDIR}/vmware-config-tools.pl --default
+   after informing you that vmware tools wasn't installed
+ - Reordered /etc/rc.d/init.d/vmware-tools to load before S10network
+   - /sbin/chkconfig --level 3 vmware-tools on
+ - rpm -e smbios-utils-python smbios-utils firmware-addon-dell
+
 38.229.70.5
  - Installed httpd
 
@@ -39,4 +68,6 @@
    This ensures rpm updates happen but the end result has permissions
    compatible with suexec.
 
-
+38.229.70.15
+ - Installed Grsec+SELinux Kernel as per above sections
+ - installed epkg (encap implementation)

Added: projects/misc-sysadmin/grsec-prep.sh
===================================================================
--- projects/misc-sysadmin/grsec-prep.sh	                        (rev 0)
+++ projects/misc-sysadmin/grsec-prep.sh	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,28 @@
+#!/bin/bash
+# 
+# Ghetto script to automate deploying grsec kernel to all boxes
+# Before running this script, scp -r ./kernel torproject@<ip>:
+# Also be sure to have a kernel tarball in ~torproject
+# 
+# Mike Perry
+
+cp ~torproject/kernel/selinux /etc/sysconfig/selinux
+cp ~torproject/kernel/fstab /etc/fstab
+/usr/sbin/genhomedircon
+touch /.autorelabel
+cp ~torproject/kernel/vmware/vmware-tools /etc/init.d/vmware-tools
+/sbin/chkconfig --level 3 vmware-tools on
+rpm -e smbios-utils-python smbios-utils firmware-addon-dell
+mv /usr/lib/vmware-tools/modules/source/ /usr/lib/vmware-tools/modules/oldsource/
+mkdir /usr/lib/vmware-tools/modules/source/
+cd /usr/lib/vmware-tools/modules/source/
+tar -zxvf ~torproject/kernel/vmware/vmware-tools-patched.tgz
+cd /usr/src/
+tar -jxvf ~torproject/linux-2.6.29.6-noreloc.tbz2
+cd linux-2.6.29.6-noreloc
+make modules_install && make install
+cp ~torproject/kernel/initrd-2.6.29.6-grsec-fc-nrl2.img /boot/
+cp ~torproject/kernel/grub.conf /etc/grub.conf
+
+# XXX: While we're at it, fix timeout on logout and put /sbin, /usr/sbin/ and
+# /usr/local/sbin in path

Added: projects/misc-sysadmin/kernel/fstab
===================================================================
--- projects/misc-sysadmin/kernel/fstab	                        (rev 0)
+++ projects/misc-sysadmin/kernel/fstab	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,7 @@
+/dev/sda1               /                       ext3    defaults        1 1
+tmpfs                   /dev/shm                tmpfs   defaults        0 0
+devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
+sysfs                   /sys                    sysfs   defaults        0 0
+proc                    /proc                   proc    defaults        0 0
+/dev/sdb1		/data01			ext3	defaults	0 0
+/dev/sda2         swap                    swap    defaults        0 0

Added: projects/misc-sysadmin/kernel/grub.conf
===================================================================
--- projects/misc-sysadmin/kernel/grub.conf	                        (rev 0)
+++ projects/misc-sysadmin/kernel/grub.conf	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,31 @@
+# grub.conf generated by anaconda
+#
+# Note that you do not have to rerun grub after making changes to this file
+# NOTICE:  You do not have a /boot partition.  This means that
+#          all kernel and initrd paths are relative to /, eg.
+#          root (hd0,0)
+#          kernel /boot/vmlinuz-version ro root=/dev/sda1
+#          initrd /boot/initrd-version.img
+#boot=/dev/sda
+default=1
+timeout=5
+splashimage=(hd0,0)/boot/grub/splash.xpm.gz
+#hiddenmenu
+serial --unit=0 --speed=38400 --word=8 --parity=no --stop=1
+terminal --timeout=10 console serial
+title CentOS (2.6.29.6-grsec-fc-nrl)
+	root (hd0,0)
+	kernel /boot/vmlinuz-2.6.29.6-grsec-fc-nrl ro root=/dev/sda1 panic=15 console=tty0 console=ttyS0,38400n8 softlockup_panic=1 nmi_watchdog=panic
+	initrd /boot/initrd-2.6.29.6-grsec-fc-nrl2.img
+title CentOS (2.6.18-128.7.1.el5)
+	root (hd0,0)
+	kernel /boot/vmlinuz-2.6.18-128.7.1.el5 ro root=/dev/sda1 panic=15 console=tty0 console=ttyS0,38400n8 softlockup_panic=1 nmi_watchdog=panic
+	initrd /boot/initrd-2.6.18-128.7.1.el5.img
+title CentOS (2.6.18-128.1.10.el5)
+	root (hd0,0)
+	kernel /boot/vmlinuz-2.6.18-128.1.10.el5 ro root=/dev/sda1 panic=15 console=tty0 console=ttyS0,38400n8 softlockup_panic=1 nmi_watchdog=panic
+	initrd /boot/initrd-2.6.18-128.1.10.el5.img
+title CentOS (2.6.18-92.el5)
+	root (hd0,0)
+	kernel /boot/vmlinuz-2.6.18-92.el5 ro root=/dev/sda1 panic=15 console=tty0 console=ttyS0,38400n8 softlockup_panic=1 nmi_watchdog=panic
+	initrd /boot/initrd-2.6.18-92.el5.img

Added: projects/misc-sysadmin/kernel/initrd/init
===================================================================
--- projects/misc-sysadmin/kernel/initrd/init	                        (rev 0)
+++ projects/misc-sysadmin/kernel/initrd/init	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,74 @@
+#!/bin/nash
+
+mount -t proc /proc /proc
+setquiet
+echo Mounting proc filesystem
+echo Mounting sysfs filesystem
+mount -t sysfs /sys /sys
+echo Creating /dev
+mount -o mode=0755 -t tmpfs /dev /dev
+mkdir /dev/pts
+mount -t devpts -o gid=5,mode=620 /dev/pts /dev/pts
+mkdir /dev/shm
+mkdir /dev/mapper
+echo Creating initial device nodes
+mknod /dev/null c 1 3
+mknod /dev/zero c 1 5
+mknod /dev/systty c 4 0
+mknod /dev/tty c 5 0
+mknod /dev/console c 5 1
+mknod /dev/ptmx c 5 2
+mknod /dev/rtc c 10 135
+mknod /dev/tty0 c 4 0
+mknod /dev/tty1 c 4 1
+mknod /dev/tty2 c 4 2
+mknod /dev/tty3 c 4 3
+mknod /dev/tty4 c 4 4
+mknod /dev/tty5 c 4 5
+mknod /dev/tty6 c 4 6
+mknod /dev/tty7 c 4 7
+mknod /dev/tty8 c 4 8
+mknod /dev/tty9 c 4 9
+mknod /dev/tty10 c 4 10
+mknod /dev/tty11 c 4 11
+mknod /dev/tty12 c 4 12
+mknod /dev/ttyS0 c 4 64
+mknod /dev/ttyS1 c 4 65
+mknod /dev/ttyS2 c 4 66
+mknod /dev/ttyS3 c 4 67
+echo Setting up hotplug.
+hotplug
+echo Creating block device nodes.
+mkblkdevs
+echo "Loading mptbase.ko module"
+insmod /lib/mptbase.ko 
+echo "Loading mptscsih.ko module"
+insmod /lib/mptscsih.ko 
+echo "Loading mptspi.ko module"
+insmod /lib/mptspi.ko 
+echo "Loading libata.ko module"
+insmod /lib/libata.ko 
+echo "Loading ata_piix.ko module"
+insmod /lib/ata_piix.ko 
+echo "Loading ide-core.ko module"
+insmod /lib/ide-core.ko 
+echo "Loading ide-gd_mod.ko module"
+insmod /lib/ide-gd_mod.ko 
+echo "Loading ide-gd_mod.ko module"
+insmod /lib/ide-gd_mod.ko 
+echo Waiting for driver initialization.
+stabilized --hash --interval 1000 /proc/scsi/scsi
+mkblkdevs
+mknod /dev/sda b 8 0
+mknod /dev/sda1 b 8 1
+mknod /dev/sda2 b 8 2
+echo Scanning and configuring dmraid supported devices
+resume /dev/sda2
+echo Creating root device.
+mkrootdev -t ext3 -o defaults,ro /dev/sda1
+echo Mounting root filesystem.
+mount /sysroot
+echo Setting up other filesystems.
+setuproot
+echo Switching to new root and running init.
+switchroot


Property changes on: projects/misc-sysadmin/kernel/initrd/init
___________________________________________________________________
Added: svn:executable
   + *

Added: projects/misc-sysadmin/kernel/initrd-2.6.29.6-grsec-fc-nrl2.img
===================================================================
(Binary files differ)


Property changes on: projects/misc-sysadmin/kernel/initrd-2.6.29.6-grsec-fc-nrl2.img
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream

Added: projects/misc-sysadmin/kernel/kernel-2.6.29.6-grsec-fc-vmware64.config
===================================================================
--- projects/misc-sysadmin/kernel/kernel-2.6.29.6-grsec-fc-vmware64.config	                        (rev 0)
+++ projects/misc-sysadmin/kernel/kernel-2.6.29.6-grsec-fc-vmware64.config	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,4271 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.6
+# Sun Sep 13 04:51:06 2009
+#
+CONFIG_64BIT=y
+# CONFIG_X86_32 is not set
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_FAST_CMPXCHG_LOCAL=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_X86_64_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+# CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-fc-nrl"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_IBS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+# CONFIG_SPARSE_IRQ is not set
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_VSMP is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=128
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_64=y
+# CONFIG_X86_DS is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+CONFIG_GART_IOMMU=y
+# CONFIG_CALGARY_IOMMU is not set
+# CONFIG_AMD_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_IOMMU_API is not set
+# CONFIG_MAXSMP is not set
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=m
+CONFIG_MICROCODE_INTEL=y
+# CONFIG_MICROCODE_AMD is not set
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_MMU_NOTIFIER=y
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW_64K=y
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=m
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_SBS=m
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=m
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+CONFIG_X86_POWERNOW_K8=m
+CONFIG_X86_POWERNOW_K8_ACPI=y
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_P4_CLOCKMOD=m
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
+# CONFIG_INTR_REMAP is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=m
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_HT_IRQ=y
+CONFIG_ISA_DMA_API=y
+CONFIG_K8_NB=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_PCCARD_NONSTATIC=m
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HOTPLUG_PCI_ACPI_IBM=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_IA32_EMULATION=y
+# CONFIG_IA32_AOUT is not set
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_CLS_CGROUP is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_BAYCOM_PAR=m
+CONFIG_YAM=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_RDMA is not set
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+CONFIG_MTD_ESB2ROM=m
+CONFIG_MTD_CK804XROM=m
+CONFIG_MTD_SCB2_FLASH=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
+CONFIG_MTD_PCI=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_CAFE=m
+CONFIG_MTD_NAND_NANDSIM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ALAUDA=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=m
+CONFIG_PARIDE=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_IBM_ASM=m
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+# CONFIG_ICS932S401 is not set
+CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_SGI_XP is not set
+CONFIG_HP_ILO=m
+# CONFIG_SGI_GRU is not set
+# CONFIG_DELL_LAPTOP is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEACPI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+CONFIG_BLK_DEV_PLATFORM=m
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=m
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ARCMSR_AER=y
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=y
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_HPTIOP=m
+CONFIG_SCSI_BUSLOGIC=y
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_MVSAS=m
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=y
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=m
+CONFIG_SATA_SIL24=m
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=m
+CONFIG_ATA_PIIX=m
+CONFIG_SATA_MV=m
+CONFIG_SATA_NV=m
+CONFIG_PDC_ADMA=m
+CONFIG_SATA_QSTOR=m
+CONFIG_SATA_PROMISE=m
+CONFIG_SATA_SX4=m
+CONFIG_SATA_SIL=m
+CONFIG_SATA_SIS=m
+CONFIG_SATA_ULI=m
+CONFIG_SATA_VIA=m
+CONFIG_SATA_VITESSE=m
+CONFIG_SATA_INIC162X=m
+CONFIG_PATA_ACPI=m
+CONFIG_PATA_ALI=m
+CONFIG_PATA_AMD=m
+CONFIG_PATA_ARTOP=m
+CONFIG_PATA_ATIIXP=m
+CONFIG_PATA_CMD640_PCI=m
+CONFIG_PATA_CMD64X=m
+CONFIG_PATA_CS5520=m
+CONFIG_PATA_CS5530=m
+CONFIG_PATA_CYPRESS=m
+CONFIG_PATA_EFAR=m
+CONFIG_ATA_GENERIC=m
+CONFIG_PATA_HPT366=m
+CONFIG_PATA_HPT37X=m
+CONFIG_PATA_HPT3X2N=m
+CONFIG_PATA_HPT3X3=m
+# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_IT821X=m
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_JMICRON=m
+CONFIG_PATA_TRIFLEX=m
+CONFIG_PATA_MARVELL=m
+CONFIG_PATA_MPIIX=m
+CONFIG_PATA_OLDPIIX=m
+CONFIG_PATA_NETCELL=m
+CONFIG_PATA_NINJA32=m
+CONFIG_PATA_NS87410=m
+CONFIG_PATA_NS87415=m
+CONFIG_PATA_OPTI=m
+CONFIG_PATA_OPTIDMA=m
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_PDC_OLD=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+CONFIG_PATA_SERVERWORKS=m
+CONFIG_PATA_PDC2027X=m
+CONFIG_PATA_SIL680=m
+CONFIG_PATA_SIS=m
+CONFIG_PATA_VIA=m
+CONFIG_PATA_WINBOND=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=m
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_DNET is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+# CONFIG_SMSC9420 is not set
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_ATP=m
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_ATL2=m
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IP1000=m
+CONFIG_IGB=m
+# CONFIG_IGB_LRO is not set
+CONFIG_IGB_DCA=y
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3_DEPENDS=y
+CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+CONFIG_IXGBE=m
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGB=m
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_EN is not set
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+# CONFIG_QLGE is not set
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+# CONFIG_BE2NET is not set
+CONFIG_TR=y
+CONFIG_IBMOL=m
+CONFIG_3C359=m
+# CONFIG_TMS380TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AIRO=m
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_ADM8211=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_ATH5K=m
+CONFIG_ATH5K_DEBUG=y
+CONFIG_ATH9K=m
+# CONFIG_ATH9K_DEBUG is not set
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLCORE=m
+CONFIG_IWLWIFI_LEDS=y
+CONFIG_IWLWIFI_RFKILL=y
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
+CONFIG_IWLAGN=m
+CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y
+CONFIG_IWLAGN_LEDS=y
+CONFIG_IWL4965=y
+CONFIG_IWL5000=y
+CONFIG_IWL3945=m
+CONFIG_IWL3945_RFKILL=y
+CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
+CONFIG_IWL3945_LEDS=y
+CONFIG_IWL3945_DEBUG=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PCMCIA=y
+CONFIG_B43_PIO=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_RFKILL=y
+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_RFKILL=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+CONFIG_RT2X00_LIB_DEBUGFS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_HSO=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+CONFIG_PCMCIA_IBMTR=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+# CONFIG_ATM_IA is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+# CONFIG_ATM_SOLOS is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+CONFIG_ISDN=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+# CONFIG_MISDN_HFCUSB is not set
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+# CONFIG_ISDN_PPP_BSDCOMP is not set
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+# CONFIG_HISAX_HFCUSB is not set
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GIGASET_UNDOCREQ is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+# CONFIG_CAPI_TRACE is not set
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+# CONFIG_JOYSTICK_WALKERA0701 is not set
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_JSM=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+CONFIG_MWAVE=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=m
+CONFIG_TCG_TIS=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_TCG_INFINEON=m
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD756_S4882=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_NFORCE2_S4985=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+# CONFIG_W1_SLAVE_DS2431 is not set
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHER=m
+CONFIG_SENSORS_FSCPOS=m
+CONFIG_SENSORS_FSCHMD=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+# CONFIG_SENSORS_LTC4245 is not set
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_APPLESMC=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+CONFIG_IBMASR=m
+# CONFIG_WAFER_WDT is not set
+CONFIG_I6300ESB_WDT=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+# CONFIG_IT87_WDT is not set
+CONFIG_HP_WATCHDOG=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_W83627HF_WDT=m
+CONFIG_W83697HF_WDT=m
+# CONFIG_W83697UG_WDT is not set
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_MEYE=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+CONFIG_DVB_USB_ANYSEE=m
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_SIANO_SMS1XXX=m
+CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_STB0899=m
+CONFIG_DVB_STB6100=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_TDA8261=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SI21XX=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_DRX397XD=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_VIA=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_I810=m
+CONFIG_DRM_I830=m
+CONFIG_DRM_I915=m
+# CONFIG_DRM_I915_KMS is not set
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=m
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_SVGALIB=m
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+# CONFIG_FB_LE80578 is not set
+CONFIG_FB_INTEL=m
+# CONFIG_FB_INTEL_DEBUG is not set
+CONFIG_FB_INTEL_I2C=y
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+CONFIG_FB_SM501=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PROGEAR=m
+CONFIG_BACKLIGHT_MBP_NVIDIA=m
+# CONFIG_BACKLIGHT_SAHARA is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_PCSP is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+# CONFIG_SND_AW2 is not set
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_SND_HDA_POWER_SAVE=y
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+# CONFIG_USB_VST is not set
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=m
+CONFIG_MMC_WBSD=m
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_ALIX2 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_CLEVO_MAIL=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+CONFIG_INFINIBAND_CXGB3=m
+# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+# CONFIG_EDAC_X38 is not set
+# CONFIG_EDAC_I5400 is not set
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+CONFIG_RTC_DRV_M48T59=m
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+# CONFIG_DMATEST is not set
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_CFAG12864B=m
+CONFIG_CFAG12864B_RATE=20
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_SMX=m
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+CONFIG_ACER_WMI=m
+CONFIG_ASUS_LAPTOP=m
+CONFIG_FUJITSU_LAPTOP=m
+# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
+CONFIG_HP_WMI=m
+CONFIG_MSI_LAPTOP=m
+# CONFIG_PANASONIC_LAPTOP is not set
+CONFIG_COMPAL_LAPTOP=m
+CONFIG_SONY_LAPTOP=m
+CONFIG_SONYPI_COMPAT=y
+CONFIG_THINKPAD_ACPI=m
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+CONFIG_THINKPAD_ACPI_BAY=y
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=m
+CONFIG_ACPI_WMI=m
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_TOSHIBA=m
+
+#
+# Firmware Drivers
+#
+CONFIG_EDD=m
+# CONFIG_EDD_OFF is not set
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
+CONFIG_DMIID=y
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SYSPROF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_DBGP is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_IOMMU_DEBUG is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+CONFIG_DEBUG_BOOT_PARAMS=y
+# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
+
+#
+# Security options
+#
+
+#
+# Grsecurity
+#
+CONFIG_GRKERNSEC=y
+# CONFIG_GRKERNSEC_LOW is not set
+# CONFIG_GRKERNSEC_MEDIUM is not set
+# CONFIG_GRKERNSEC_HIGH is not set
+CONFIG_GRKERNSEC_CUSTOM=y
+
+#
+# Address Space Protection
+#
+CONFIG_GRKERNSEC_KMEM=y
+CONFIG_GRKERNSEC_IO=y
+CONFIG_GRKERNSEC_PROC_MEMMAP=y
+CONFIG_GRKERNSEC_BRUTE=y
+CONFIG_GRKERNSEC_MODSTOP=y
+CONFIG_GRKERNSEC_HIDESYM=y
+
+#
+# Role Based Access Control Options
+#
+CONFIG_GRKERNSEC_NO_RBAC=y
+# CONFIG_GRKERNSEC_ACL_HIDEKERN is not set
+CONFIG_GRKERNSEC_ACL_MAXTRIES=3
+CONFIG_GRKERNSEC_ACL_TIMEOUT=30
+
+#
+# Filesystem Protections
+#
+CONFIG_GRKERNSEC_PROC=y
+# CONFIG_GRKERNSEC_PROC_USER is not set
+CONFIG_GRKERNSEC_PROC_USERGROUP=y
+CONFIG_GRKERNSEC_PROC_GID=521
+CONFIG_GRKERNSEC_PROC_ADD=y
+CONFIG_GRKERNSEC_LINK=y
+CONFIG_GRKERNSEC_FIFO=y
+CONFIG_GRKERNSEC_CHROOT=y
+CONFIG_GRKERNSEC_CHROOT_MOUNT=y
+CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
+CONFIG_GRKERNSEC_CHROOT_PIVOT=y
+CONFIG_GRKERNSEC_CHROOT_CHDIR=y
+CONFIG_GRKERNSEC_CHROOT_CHMOD=y
+CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
+CONFIG_GRKERNSEC_CHROOT_MKNOD=y
+CONFIG_GRKERNSEC_CHROOT_SHMAT=y
+CONFIG_GRKERNSEC_CHROOT_UNIX=y
+CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
+CONFIG_GRKERNSEC_CHROOT_NICE=y
+CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
+CONFIG_GRKERNSEC_CHROOT_CAPS=y
+
+#
+# Kernel Auditing
+#
+# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
+# CONFIG_GRKERNSEC_EXECLOG is not set
+# CONFIG_GRKERNSEC_RESLOG is not set
+CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
+# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
+CONFIG_GRKERNSEC_AUDIT_MOUNT=y
+# CONFIG_GRKERNSEC_AUDIT_IPC is not set
+CONFIG_GRKERNSEC_SIGNAL=y
+CONFIG_GRKERNSEC_FORKFAIL=y
+CONFIG_GRKERNSEC_TIME=y
+CONFIG_GRKERNSEC_PROC_IPADDR=y
+# CONFIG_GRKERNSEC_AUDIT_TEXTREL is not set
+
+#
+# Executable Protections
+#
+CONFIG_GRKERNSEC_EXECVE=y
+CONFIG_GRKERNSEC_DMESG=y
+CONFIG_GRKERNSEC_TPE=y
+# CONFIG_GRKERNSEC_TPE_ALL is not set
+# CONFIG_GRKERNSEC_TPE_INVERT is not set
+CONFIG_GRKERNSEC_TPE_GID=518
+
+#
+# Network Protections
+#
+CONFIG_GRKERNSEC_RANDNET=y
+CONFIG_GRKERNSEC_BLACKHOLE=y
+CONFIG_GRKERNSEC_SOCKET=y
+CONFIG_GRKERNSEC_SOCKET_ALL=y
+CONFIG_GRKERNSEC_SOCKET_ALL_GID=520
+CONFIG_GRKERNSEC_SOCKET_CLIENT=y
+CONFIG_GRKERNSEC_SOCKET_CLIENT_GID=520
+CONFIG_GRKERNSEC_SOCKET_SERVER=y
+CONFIG_GRKERNSEC_SOCKET_SERVER_GID=519
+
+#
+# Sysctl support
+#
+CONFIG_GRKERNSEC_SYSCTL=y
+CONFIG_GRKERNSEC_SYSCTL_ON=y
+
+#
+# Logging Options
+#
+CONFIG_GRKERNSEC_FLOODTIME=10
+CONFIG_GRKERNSEC_FLOODBURST=4
+
+#
+# PaX
+#
+CONFIG_PAX=y
+
+#
+# PaX Control
+#
+# CONFIG_PAX_SOFTMODE is not set
+CONFIG_PAX_EI_PAX=y
+# CONFIG_PAX_PT_PAX_FLAGS is not set
+# CONFIG_PAX_NO_ACL_FLAGS is not set
+CONFIG_PAX_HAVE_ACL_FLAGS=y
+# CONFIG_PAX_HOOK_ACL_FLAGS is not set
+
+#
+# Non-executable pages
+#
+CONFIG_PAX_NOEXEC=y
+CONFIG_PAX_PAGEEXEC=y
+CONFIG_PAX_EMUTRAMP=y
+CONFIG_PAX_MPROTECT=y
+CONFIG_PAX_NOELFRELOCS=y
+CONFIG_PAX_KERNEXEC=y
+
+#
+# Address Space Layout Randomization
+#
+CONFIG_PAX_ASLR=y
+CONFIG_PAX_RANDUSTACK=y
+CONFIG_PAX_RANDMMAP=y
+
+#
+# Miscellaneous hardening features
+#
+CONFIG_PAX_MEMORY_SANITIZE=y
+CONFIG_PAX_REFCOUNT=y
+CONFIG_PAX_USERCOPY=y
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_AES_X86_64 is not set
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SALSA20_X86_64 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y

Added: projects/misc-sysadmin/kernel/selinux
===================================================================
--- projects/misc-sysadmin/kernel/selinux	                        (rev 0)
+++ projects/misc-sysadmin/kernel/selinux	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,13 @@
+# This file controls the state of SELinux on the system.
+# SELINUX= can take one of these three values:
+#	enforcing - SELinux security policy is enforced.
+#	permissive - SELinux prints warnings instead of enforcing.
+#	disabled - SELinux is fully disabled.
+SELINUX=permissive
+# SELINUXTYPE= type of policy in use. Possible values are:
+#	targeted - Only targeted network daemons are protected.
+#	strict - Full SELinux protection.
+SELINUXTYPE=targeted
+
+# SETLOCALDEFS= Check local definition changes
+SETLOCALDEFS=0 

Added: projects/misc-sysadmin/kernel/vmware/vmware-tools
===================================================================
--- projects/misc-sysadmin/kernel/vmware/vmware-tools	                        (rev 0)
+++ projects/misc-sysadmin/kernel/vmware/vmware-tools	2009-09-13 13:56:52 UTC (rev 20547)
@@ -0,0 +1,987 @@
+#!/bin/sh
+#
+# Copyright (C) 1998-2002 VMware, Inc.  All Rights Reserved.
+#
+# This script manages the services needed to run VMware software
+
+# Basic support for IRIX style chkconfig
+# chkconfig: 235 08 08
+# description: Manages the services needed to run VMware software
+
+# Basic support for the Linux Standard Base Specification 1.0.0 (to be used by
+# insserv for example)
+### BEGIN INIT INFO
+# Provides: VMware_Tools
+# Required-Start:
+# Required-Stop: $network
+# Default-Start: 2 3 5
+# Default-Stop: 0 6
+# Description: Manages the services needed to run VMware Tools
+### END INIT INFO
+
+# BEGINNING_OF_UTIL_DOT_SH
+#!/bin/sh
+
+# A few utility functions used by our shell scripts. These are patched in 
+# during make.
+
+vmware_failed() {
+  if [ "`type -t 'echo_failure' 2>/dev/null`" = 'function' ]; then
+    echo_failure
+  else
+    echo -n "$rc_failed"
+  fi
+}
+
+vmware_success() {
+  if [ "`type -t 'echo_success' 2>/dev/null`" = 'function' ]; then
+    echo_success
+  else
+    echo -n "$rc_done"
+  fi
+}
+
+# Execute a macro
+vmware_exec() {
+  local msg="$1"  # IN
+  local func="$2" # IN
+  shift 2
+
+  echo -n '   '"$msg"
+
+  # On Caldera 2.2, SIGHUP is sent to all our children when this script exits
+  # I wanted to use shopt -u huponexit instead but their bash version
+  # 1.14.7(1) is too old
+  #
+  # Ksh does not recognize the SIG prefix in front of a signal name
+  if [ "$VMWARE_DEBUG" = 'yes' ]; then
+    (trap '' HUP; "$func" "$@")
+  else
+    (trap '' HUP; "$func" "$@") >/dev/null 2>&1
+  fi
+  if [ "$?" -gt 0 ]; then
+    vmware_failed
+    echo
+    return 1
+  fi
+
+  vmware_success
+  echo
+  return 0
+}
+
+# Execute a macro in the background
+vmware_bg_exec() {
+  local msg="$1"  # IN
+  local func="$2" # IN
+  shift 2
+
+  if [ "$VMWARE_DEBUG" = 'yes' ]; then
+    # Force synchronism when debugging
+    vmware_exec "$msg" "$func" "$@"
+  else
+    echo -n '   '"$msg"' (background)'
+
+    # On Caldera 2.2, SIGHUP is sent to all our children when this script exits
+    # I wanted to use shopt -u huponexit instead but their bash version
+    # 1.14.7(1) is too old
+    #
+    # Ksh does not recognize the SIG prefix in front of a signal name
+    (trap '' HUP; "$func" "$@") 2>&1 | logger -t 'VMware[init]' -p daemon.err &
+
+    vmware_success
+    echo
+    return 0
+  fi
+}
+
+# This is a function in case a future product name contains language-specific
+# escape characters.
+vmware_product_name() {
+  echo 'VMware Tools'
+  exit 0
+}
+
+# This is a function in case a future product contains language-specific
+# escape characters.
+vmware_product() {
+  echo 'tools-for-linux'
+  exit 0
+}
+
+# They are a lot of small utility programs to create temporary files in a
+# secure way, but none of them is standard. So I wrote this --hpreg
+make_tmp_dir() {
+  local dirname="$1" # OUT
+  local prefix="$2"  # IN
+  local tmp
+  local serial
+  local loop
+
+  tmp="${TMPDIR:-/tmp}"
+
+  # Don't overwrite existing user data
+  # -> Create a directory with a name that didn't exist before
+  #
+  # This may never succeed (if we are racing with a malicious process), but at
+  # least it is secure
+  serial=0
+  loop='yes'
+  while [ "$loop" = 'yes' ]; do
+    # Check the validity of the temporary directory. We do this in the loop
+    # because it can change over time
+    if [ ! -d "$tmp" ]; then
+      echo 'Error: "'"$tmp"'" is not a directory.'
+      echo
+      exit 1
+    fi
+    if [ ! -w "$tmp" -o ! -x "$tmp" ]; then
+      echo 'Error: "'"$tmp"'" should be writable and executable.'
+      echo
+      exit 1
+    fi
+
+    # Be secure
+    # -> Don't give write access to other users (so that they can not use this
+    # directory to launch a symlink attack)
+    if mkdir -m 0755 "$tmp"'/'"$prefix$serial" >/dev/null 2>&1; then
+      loop='no'
+    else
+      serial=`expr $serial + 1`
+      serial_mod=`expr $serial % 200`
+      if [ "$serial_mod" = '0' ]; then
+        echo 'Warning: The "'"$tmp"'" directory may be under attack.'
+        echo
+      fi
+    fi
+  done
+
+  eval "$dirname"'="$tmp"'"'"'/'"'"'"$prefix$serial"'
+}
+
+# Checks if the given pid represents a live process.
+# Returns 0 if the pid is a live process, 1 otherwise
+vmware_is_process_alive() {
+  local pid="$1" # IN
+
+  ps -p $pid | grep $pid > /dev/null 2>&1
+}
+
+# Check if the process associated to a pidfile is running.
+# Return 0 if the pidfile exists and the process is running, 1 otherwise
+vmware_check_pidfile() {
+  local pidfile="$1" # IN
+  local pid
+
+  pid=`cat "$pidfile" 2>/dev/null`
+  if [ "$pid" = '' ]; then
+    # The file probably does not exist or is empty. Failure
+    return 1
+  fi
+  # Keep only the first number we find, because some Samba pid files are really
+  # trashy: they end with NUL characters
+  # There is no double quote around $pid on purpose
+  set -- $pid
+  pid="$1"
+
+  vmware_is_process_alive $pid
+}
+
+# Note:
+#  . Each daemon must be started from its own directory to avoid busy devices
+#  . Each PID file doesn't need to be added to the installer database, because
+#    it is going to be automatically removed when it becomes stale (after a
+#    reboot). It must go directly under /var/run, or some distributions
+#    (RedHat 6.0) won't clean it
+#
+
+# Terminate a process synchronously
+vmware_synchrone_kill() {
+   local pid="$1"    # IN
+   local signal="$2" # IN
+   local second
+
+   kill -"$signal" "$pid"
+
+   # Wait a bit to see if the dirty job has really been done
+   for second in 0 1 2 3 4 5 6 7 8 9 10; do
+      vmware_is_process_alive "$pid"
+      if [ "$?" -ne 0 ]; then
+         # Success
+         return 0
+      fi
+
+      sleep 1
+   done
+
+   # Timeout
+   return 1
+}
+
+# Kill the process associated to a pidfile
+vmware_stop_pidfile() {
+   local pidfile="$1" # IN
+   local pid
+
+   pid=`cat "$pidfile" 2>/dev/null`
+   if [ "$pid" = '' ]; then
+      # The file probably does not exist or is empty. Success
+      return 0
+   fi
+   # Keep only the first number we find, because some Samba pid files are really
+   # trashy: they end with NUL characters
+   # There is no double quote around $pid on purpose
+   set -- $pid
+   pid="$1"
+
+   # First try a nice SIGTERM
+   if vmware_synchrone_kill "$pid" 15; then
+      return 0
+   fi
+
+   # Then send a strong SIGKILL
+   if vmware_synchrone_kill "$pid" 9; then
+      return 0
+   fi
+
+   return 1
+}
+
+# Determine if SELinux is enabled
+isSELinuxEnabled() {
+   if [ "`cat /selinux/enforce 2> /dev/null`" = "1" ]; then
+      echo "yes"
+   else
+      echo "no"
+   fi
+}
+
+# Runs a command and retries under the provided SELinux context if it fails
+vmware_exec_selinux() {
+   local command="$1"
+   # XXX We should probably ask the user at install time what context to use
+   # when we retry commands.  unconfined_t is the correct choice for Red Hat.
+   local context="unconfined_t"
+   local retval
+
+   $command
+   retval=$?
+   if [ $retval -ne 0 -a "`isSELinuxEnabled`" = 'yes' ]; then
+      runcon -t $context -- $command
+      retval=$?
+   fi
+
+   return $retval
+}
+
+# Start the blocking file system.  This consists of loading the module and
+# mounting the file system.
+vmware_start_vmblock() {
+   mkdir -p /tmp/VMwareDnD && chmod 1777 /tmp/VMwareDnD
+   vmware_exec 'Loading module' vmware_load_module $vmblock
+   exitcode=`expr $exitcode + $?`
+   vmware_exec_selinux "mount -t vmblock none /proc/fs/vmblock/mountPoint"
+}
+
+# Stop the blocking file system
+vmware_stop_vmblock() {
+   # It's okay for us to not factor the umount command's error code into
+   # exitcode since the module unload will fail if the file system remains
+   # mounted.
+   vmware_exec_selinux "umount /proc/fs/vmblock/mountPoint"
+
+   vmware_unload_module $vmblock
+}
+
+is_ESX_running() {
+  if [ ! -f "$vmdb_answer_SBINDIR"/vmware-checkvm ] ; then
+    echo no
+    return
+  fi
+  if "$vmdb_answer_SBINDIR"/vmware-checkvm -p | grep -q ESX; then
+    echo yes
+  else
+    echo no
+  fi
+}
+
+#
+# Start vmblock only if ESX is not running and the config script
+# built/loaded it (kernel is >= 2.4.0 and  product is tools-for-linux).
+# 
+is_vmblock_needed() {
+  if [ "`is_ESX_running`" = 'yes' ]; then
+    echo no
+  else
+    if [ "$vmdb_answer_VMBLOCK_CONFED" = 'yes' ]; then
+      echo yes
+    else
+      echo no
+    fi
+  fi
+}
+# END_OF_UTIL_DOT_SH
+
+vmware_etc_dir=/etc/vmware-tools
+
+# Since this script is installed, our main database should be installed too and
+# should contain the basic information
+vmware_db="$vmware_etc_dir"/locations
+if [ ! -r "$vmware_db" ]; then
+    echo 'Warning: Unable to find '"`vmware_product_name`""'"'s main database '"$vmware_db"'.'
+    echo
+
+    exit 1
+fi
+
+# BEGINNING_OF_DB_DOT_SH
+#!/bin/sh
+
+#
+# Manage an installer database
+#
+
+# Add an answer to a database in memory
+db_answer_add() {
+  local dbvar="$1" # IN/OUT
+  local id="$2"    # IN
+  local value="$3" # IN
+  local answers
+  local i
+
+  eval "$dbvar"'_answer_'"$id"'="$value"'
+
+  eval 'answers="$'"$dbvar"'_answers"'
+  # There is no double quote around $answers on purpose
+  for i in $answers; do
+    if [ "$i" = "$id" ]; then
+      return
+    fi
+  done
+  answers="$answers"' '"$id"
+  eval "$dbvar"'_answers="$answers"'
+}
+
+# Remove an answer from a database in memory
+db_answer_remove() {
+  local dbvar="$1" # IN/OUT
+  local id="$2"    # IN
+  local new_answers
+  local answers
+  local i
+
+  eval 'unset '"$dbvar"'_answer_'"$id"
+
+  new_answers=''
+  eval 'answers="$'"$dbvar"'_answers"'
+  # There is no double quote around $answers on purpose
+  for i in $answers; do
+    if [ "$i" != "$id" ]; then
+      new_answers="$new_answers"' '"$i"
+    fi
+  done
+  eval "$dbvar"'_answers="$new_answers"'
+}
+
+# Load all answers from a database on stdin to memory (<dbvar>_answer_*
+# variables)
+db_load_from_stdin() {
+  local dbvar="$1" # OUT
+
+  eval "$dbvar"'_answers=""'
+
+  # read doesn't support -r on FreeBSD 3.x. For this reason, the following line
+  # is patched to remove the -r in case of FreeBSD tools build. So don't make
+  # changes to it. -- Jeremy Bar
+  while read -r action p1 p2; do
+    if [ "$action" = 'answer' ]; then
+      db_answer_add "$dbvar" "$p1" "$p2"
+    elif [ "$action" = 'remove_answer' ]; then
+      db_answer_remove "$dbvar" "$p1"
+    fi
+  done
+}
+
+# Load all answers from a database on disk to memory (<dbvar>_answer_*
+# variables)
+db_load() {
+  local dbvar="$1"  # OUT
+  local dbfile="$2" # IN
+
+  db_load_from_stdin "$dbvar" < "$dbfile"
+}
+
+# Iterate through all answers in a database in memory, calling <func> with
+# id/value pairs and the remaining arguments to this function
+db_iterate() {
+  local dbvar="$1" # IN
+  local func="$2"  # IN
+  shift 2
+  local answers
+  local i
+  local value
+
+  eval 'answers="$'"$dbvar"'_answers"'
+  # There is no double quote around $answers on purpose
+  for i in $answers; do
+    eval 'value="$'"$dbvar"'_answer_'"$i"'"'
+    "$func" "$i" "$value" "$@"
+  done
+}
+
+# If it exists in memory, remove an answer from a database (disk and memory)
+db_remove_answer() {
+  local dbvar="$1"  # IN/OUT
+  local dbfile="$2" # IN
+  local id="$3"     # IN
+  local answers
+  local i
+
+  eval 'answers="$'"$dbvar"'_answers"'
+  # There is no double quote around $answers on purpose
+  for i in $answers; do
+    if [ "$i" = "$id" ]; then
+      echo 'remove_answer '"$id" >> "$dbfile"
+      db_answer_remove "$dbvar" "$id"
+      return
+    fi
+  done
+}
+
+# Add an answer to a database (disk and memory)
+db_add_answer() {
+  local dbvar="$1"  # IN/OUT
+  local dbfile="$2" # IN
+  local id="$3"     # IN
+  local value="$4"  # IN
+
+  db_remove_answer "$dbvar" "$dbfile" "$id"
+  echo 'answer '"$id"' '"$value" >> "$dbfile"
+  db_answer_add "$dbvar" "$id" "$value"
+}
+
+# Add a file to a database on disk
+# 'file' is the file to put in the database (it may not exist on the disk)
+# 'tsfile' is the file to get the timestamp from, '' if no timestamp
+db_add_file() {
+  local dbfile="$1" # IN
+  local file="$2"   # IN
+  local tsfile="$3" # IN
+  local date
+
+  if [ "$tsfile" = '' ]; then
+    echo 'file '"$file" >> "$dbfile"
+  else
+    date=`date -r "$tsfile" '+%s' 2> /dev/null`
+    if [ "$date" != '' ]; then
+      date=' '"$date"
+    fi
+    echo 'file '"$file$date" >> "$dbfile"
+  fi
+}
+
+# Add a directory to a database on disk
+db_add_dir() {
+  local dbfile="$1" # IN
+  local dir="$2"    # IN
+
+  echo 'directory '"$dir" >> "$dbfile"
+}
+# END_OF_DB_DOT_SH
+
+db_load 'vmdb' "$vmware_db"
+
+# This comment is a hack to prevent RedHat distributions from outputing
+# "Starting <basename of this script>" when running this startup script.
+# We just need to write the word daemon followed by a space --hpreg.
+
+# This defines echo_success() and echo_failure() on RedHat
+if [ -r "$vmdb_answer_INITSCRIPTSDIR"'/functions' ]; then
+    . "$vmdb_answer_INITSCRIPTSDIR"'/functions'
+fi
+
+# This defines $rc_done and $rc_failed on S.u.S.E.
+if [ -f /etc/rc.config ]; then
+   # Don't include the entire file: there could be conflicts
+   rc_done=`(. /etc/rc.config; echo "$rc_done")`
+   rc_failed=`(. /etc/rc.config; echo "$rc_failed")`
+else
+   # Make sure the ESC byte is literal: Ash does not support echo -e
+   rc_done=' done'
+   rc_failed='failed'
+fi
+
+#
+# Global variables
+#
+vmmemctl="vmmemctl"
+vmxnet="vmxnet"
+vmhgfs="vmhgfs"
+vmdesched="vmdesched"
+subsys=vmware-tools
+vmblock="vmblock"
+crosstalk="vmcrosstalk"
+
+vmhgfs_mnt="/mnt/hgfs"
+
+#
+# Utilities
+#
+
+# BEGINNING_OF_IPV4_DOT_SH
+#!/bin/sh
+
+#
+# IPv4 address functions
+#
+# Thanks to Owen DeLong <owen at delong.com> for pointing me at bash's arithmetic
+# expansion ability, which is a lot faster than using 'expr' --hpreg
+#
+
+# Compute the subnet address associated to a couple IP/netmask
+ipv4_subnet() {
+  local ip="$1"
+  local netmask="$2"
+
+  # Split quad-dotted addresses into bytes
+  # There is no double quote around the back-quoted expression on purpose
+  # There is no double quote around $ip and $netmask on purpose
+  set -- `IFS='.'; echo $ip $netmask`
+
+  echo $(($1 & $5)).$(($2 & $6)).$(($3 & $7)).$(($4 & $8))
+}
+
+# Compute the broadcast address associated to a couple IP/netmask
+ipv4_broadcast() {
+  local ip="$1"
+  local netmask="$2"
+
+  # Split quad-dotted addresses into bytes
+  # There is no double quote around the back-quoted expression on purpose
+  # There is no double quote around $ip and $netmask on purpose
+  set -- `IFS='.'; echo $ip $netmask`
+
+  echo $(($1 | (255 - $5))).$(($2 | (255 - $6))).$(($3 | (255 - $7))).$(($4 | (255 - $8)))
+}
+# END_OF_IPV4_DOT_SH
+
+# Are we running in a VM?
+vmware_inVM() {
+  "$vmdb_answer_SBINDIR"/vmware-checkvm >/dev/null 2>&1
+}
+
+vmware_hwVersion() {
+  "$vmdb_answer_SBINDIR"/vmware-checkvm -h | grep hw | cut -d ' ' -f 5
+}
+
+# Is a given module loaded?
+isLoaded() {
+  local module="$1"
+
+  /sbin/lsmod | awk 'BEGIN {n = "no";} {if ($1 == "'"$module"'") n = "yes";} END {print n;}'
+}
+
+# Build a Linux kernel integer version
+kernel_version_integer() {
+  echo $(((($1 * 256) + $2) * 256 + $3))
+}
+
+# Get the running kernel integer version
+get_version_integer() {
+  local version_uts
+  local v1
+  local v2
+  local v3
+
+  version_uts=`uname -r`
+
+  # There is no double quote around the back-quoted expression on purpose
+  # There is no double quote around $version_uts on purpose
+  set `IFS='.'; echo $version_uts`
+  v1="$1"
+  v2="$2"
+  v3="$3"
+  # There is no double quote around the back-quoted expression on purpose
+  # There is no double quote around $v3 on purpose
+  set `IFS='-ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz'; echo $v3`
+  v3="$1"
+
+  kernel_version_integer "$v1" "$v2" "$v3"
+}
+
+# Be sure we enable DMA on all the disks for best performance.
+vmware_start_dma() {
+  if [ -x /sbin/hdparm ]; then
+     /sbin/hdparm -d 1 /dev/hda > /dev/null 2>&1
+     /sbin/hdparm -d 1 /dev/hdb > /dev/null 2>&1
+     /sbin/hdparm -d 1 /dev/hdc > /dev/null 2>&1
+     /sbin/hdparm -d 1 /dev/hdd > /dev/null 2>&1
+  fi
+
+  exit 0
+}
+
+#
+# We exit on failure because these functions are called within the
+# context of vmware_exec, which sets up a trap that causes exit to jump
+# back to vmware_exec, like an exception handler. On success, we return
+# because our caller may want to perform additional instructions.
+#
+vmware_load_module() {
+   if [ "`isLoaded "$1"`" = 'yes' ]; then
+      /sbin/rmmod "$1"
+   fi
+   /sbin/insmod -s -f "/lib/modules/`uname -r`/misc/$1.o" >/dev/null 2>&1 || /sbin/insmod -s -f "$1" >/dev/null 2>&1 || exit 1
+   return 0
+}
+
+vmware_unload_module() {
+   if [ "`isLoaded "$1"`" = 'yes' ]; then
+      /sbin/rmmod "$1" >/dev/null 2>&1 || exit 1
+   fi
+   return 0
+}
+
+#
+# Note:
+#  . Each daemon must be started from its own directory to avoid busy devices
+#  . Each PID file doesn't need to be added to the installer database, because
+#    it is going to be automatically removed when it becomes stale (after a
+#    reboot). It must go directly under /var/run, or some distributions
+#    (RedHat 6.0) won't clean it
+#
+
+vmware_start_daemon() {
+   cd "$vmdb_answer_SBINDIR" && "$vmdb_answer_SBINDIR"/vmware-$1 \
+      --background "/var/run/vmware-$1.pid"
+}
+
+vmware_stop_daemon() {
+   local pidfile="/var/run/vmware-$1.pid"
+   if vmware_stop_pidfile $pidfile; then
+     rm -f $pidfile
+   fi
+}
+
+vmware_daemon_status() {
+   echo -n "vmware-$1 "
+   if vmware_check_pidfile "/var/run/vmware-$1.pid"; then
+      echo 'is running'
+   else
+      echo 'is not running'
+      exitcode=$(($exitcode + 1))
+   fi
+}
+
+# Start the virtual ethernet kernel service
+vmware_start_vmxnet() {
+   # only load vmxnet if it's not already loaded
+   if [ "`isLoaded "$vmxnet"`" = 'no' ]; then
+     vmware_load_module $vmxnet
+   fi
+}
+
+vmware_switch() {
+  "$vmdb_answer_BINDIR"/vmware-config-tools.pl --switch
+  exit 0
+}
+
+# Start the guest virtual memory manager
+vmware_start_vmmemctl() {
+  vmware_load_module $vmmemctl
+}
+
+# Stop the guest virtual memory manager
+vmware_stop_vmmemctl() {
+  vmware_unload_module $vmmemctl
+}
+
+# Load the module and start the guest vmdesched service
+vmware_start_vmdesched() {
+   local ret='0'
+   vmware_exec 'Loading vmdesched driver module:' vmware_load_module $vmdesched
+   ret=$(($ret + $?))
+   if [ "$ret" -eq 0 ]; then 
+      # XXX Should do this in the service binary
+      rm -f /dev/$vmdesched 
+      local major=$(awk "/"$vmdesched/" {print \$1}" /proc/devices)
+      mknod /dev/$vmdesched c $major 0
+      vmware_exec 'Guest descheduled time accounting daemon: ' vmware_start_daemon $vmdesched
+   fi
+   return $ret
+}
+
+# Stop the guest vmdesched service and unload the module
+vmware_stop_vmdesched() {
+  local ret='0'
+  vmware_exec 'Guest descheduled time accounting daemon:' vmware_stop_daemon $vmdesched
+  ret=$(($ret + $?))
+  vmware_exec 'Unloading vmdesched driver module:' vmware_unload_module $vmdesched
+  ret=$(($ret + $?))
+  rm -f /dev/$vmdesched
+  return $ret
+}
+
+# Start the guest crosstalk driver and mount it
+vmware_start_crosstalk() {
+  # only load crosstalk if it's not already loaded
+  if [ "`isLoaded "$crosstalk"`" = 'no' ]; then
+    vmware_load_module $crosstalk
+  fi
+}
+
+# unmount it
+vmware_stop_crosstalk() {
+  # only load crosstalk if it's not already loaded
+  if [ "`isLoaded "$crosstalk"`" = 'yes' ]; then
+    vmware_unload_module $crosstalk
+  fi
+}
+
+# Identify whether there's a mount mounted on the default hgfs mountpoint
+is_vmhgfs_mounted() {
+  if [ `grep -q " $vmhgfs_mnt vmhgfs " /etc/mtab` ]; then
+    echo yes
+  else
+    echo no
+  fi
+}
+
+# Mount all hgfs filesystems
+vmware_mount_vmhgfs() {
+  if [ "`is_vmhgfs_mounted`" = "no" ]; then
+    vmware_exec_selinux "mount -t vmhgfs .host:/ $vmhgfs_mnt"
+  fi
+}
+
+# Start the guest filesystem driver and mount it
+vmware_start_vmhgfs() {
+  # only load vmhgfs if it's not already loaded
+  if [ "`isLoaded "$vmhgfs"`" = 'no' ]; then
+    vmware_load_module $vmhgfs
+  fi
+}
+
+# Unmount all hgfs filesystems left mounted
+vmware_unmount_vmhgfs() {
+  if [ "`is_vmhgfs_mounted`" = "yes" ]; then
+    vmware_exec_selinux "umount $vmhgfs_mnt"
+  fi
+}
+
+# Stop the guest filesystem driver
+vmware_stop_vmhgfs() {
+  vmware_unload_module $vmhgfs
+}
+
+is_vmhgfs_needed() {
+  local min_kver=`kernel_version_integer '2' '4' '0'`
+  local run_kver=`get_version_integer`
+  if [ $min_kver -le $run_kver -a "$vmdb_answer_VMHGFS_CONFED" = 'yes' ]; then
+    echo yes
+  else
+    echo no
+  fi
+}
+
+is_vmmemctl_needed() {
+  if [ "$vmdb_answer_VMMEMCTL_CONFED" = 'yes' ]; then
+    echo yes
+  else
+    echo no
+  fi
+}
+
+is_vmxnet_needed() {
+
+  # First try vmxnet's vendor/device ID's
+  cat /proc/bus/pci/devices | grep -qi "^[0-9a-f]*	15ad0720	"
+  if [ "$?" -eq 0 -a "$vmdb_answer_VMXNET_CONFED" = 'yes' ]; then
+    echo yes
+  else
+    # Now try pcnet32's vendor/device ID's...see bug 79352
+    # We only accept pcnet32 if the HW version of the VM is ws50 or later
+    local hwver=`vmware_hwVersion`
+    cat /proc/bus/pci/devices | grep -qi "^[0-9a-f]*	10222000	"
+    if [ "$?" -eq 0 -a "$vmdb_answer_VMXNET_CONFED" = 'yes' -a \
+	 $hwver -ge 4 ]; then
+      echo yes
+    else
+      echo no
+    fi
+  fi
+}
+
+is_vmdesched_needed() {
+  if [ "$vmdb_answer_VMDESCHED_CONFED" = 'yes' ]; then
+    echo yes
+  else
+    echo no
+  fi
+}
+
+is_crosstalk_needed() {
+   if [ "$vmdb_answer_CROSSTALK_CONFED" = 'yes' ]; then
+      echo yes
+   else
+      echo no
+   fi
+}
+
+# See how we were called.
+case "$1" in
+   start)
+      exitcode='0'
+      if vmware_inVM; then
+         if [ -e "$vmware_etc_dir"/not_configured ]; then
+            echo "`vmware_product_name`"' is installed, but it has not been '
+            echo '(correctly) configured for the running kernel.'
+            echo 'To (re-)configure it, invoke the following command: '
+            echo "$vmdb_answer_BINDIR"'/vmware-config-tools.pl.'
+            echo
+            ${vmdb_answer_BINDIR}/vmware-config-tools.pl --default
+         fi
+
+         echo 'Starting VMware Tools services in the virtual machine:'
+         vmware_exec 'Switching to guest configuration:' vmware_switch
+         exitcode=$(($exitcode + $?))
+
+         if [ "`is_vmhgfs_needed`" = 'yes' -a "`is_ESX_running`" = 'no' ]; then
+            vmware_exec 'Guest filesystem driver:' vmware_start_vmhgfs
+            exitcode=$(($exitcode + $?))
+            vmware_exec 'Mounting HGFS shares:' vmware_mount_vmhgfs
+	    # Ignore the exitcode. The mount may fail if HGFS is disabled
+	    # in the host, in which case requiring a rerun of the Tools
+	    # configurator is useless.
+         fi
+
+         if [ "`is_vmmemctl_needed`" = 'yes' ]; then
+            vmware_exec 'Guest memory manager:' vmware_start_vmmemctl
+            exitcode=$(($exitcode + $?))
+         fi
+
+         if [ "`is_vmxnet_needed`" = 'yes' ]; then
+            vmware_exec 'Guest vmxnet fast network device:' vmware_start_vmxnet
+            exitcode=$(($exitcode + $?))
+         fi
+
+         if [ "`is_vmdesched_needed`" = 'yes' ]; then
+            vmware_start_vmdesched
+            exitcode=$(($exitcode + $?))
+         fi
+
+         if [ "`is_crosstalk_needed`" = 'yes' ]; then
+           vmware_exec 'New Host-Guest communications path:' vmware_start_crosstalk
+           exitcode=$(($exitcode + $?))
+         fi
+
+         if [ "`is_vmblock_needed`" = 'yes' ] ; then
+            vmware_exec 'Blocking file system:' vmware_start_vmblock
+            exitcode=$(($exitcode + $?))
+         fi
+
+         vmware_exec 'DMA setup:' vmware_start_dma
+         exitcode=$(($exitcode + $?))
+
+         vmware_exec 'Guest operating system daemon:' vmware_start_daemon guestd
+         exitcode=$(($exitcode + $?))
+
+         # Try to enable tso for all interfaces
+         # Here all messages and errors are ignored and not displayed
+         if which ethtool >/dev/null 2>&1; then
+            # -a is important with ifconfig, which means list all interfaces
+            for ethif in `ifconfig -a | grep ^eth | cut -d' ' -f1`; do
+               ethtool -K $ethif tso on >/dev/null 2>&1
+            done
+         fi
+      else
+         echo 'Starting VMware Tools services on the host:'
+         vmware_exec 'Switching to host config:' vmware_switch
+         exitcode=$(($exitcode + $?))
+      fi
+
+   if [ "$exitcode" -gt 0 ]; then
+      # Set the 'not configured' flag
+      touch "$vmware_etc_dir"'/not_configured'
+      chmod 644 "$vmware_etc_dir"'/not_configured'
+      db_add_file "$vmware_db" "$vmware_etc_dir"'/not_configured' \
+         "$vmware_etc_dir"'/not_configured'
+      exit 1
+   fi
+
+   [ -d /var/lock/subsys ] || mkdir -p /var/lock/subsys
+   touch /var/lock/subsys/"$subsys"
+   ;;
+
+   stop)
+      exitcode='0'
+
+      if vmware_inVM; then
+         echo 'Stopping VMware Tools services in the virtual machine:'
+         vmware_exec 'Guest operating system daemon:' vmware_stop_daemon guestd
+         exitcode=$(($exitcode + $?))
+
+         if [ "`is_vmblock_needed`" = 'yes' ] ; then
+           vmware_exec 'Blocking file system:' vmware_stop_vmblock
+           exitcode=$(($exitcode + $?))
+	 fi
+
+         if [ "`is_vmhgfs_needed`" = 'yes' ]; then
+           vmware_exec 'Unmounting HGFS shares:' vmware_unmount_vmhgfs
+           exitcode=$(($exitcode + $?))
+           vmware_exec 'Guest filesystem driver:' vmware_stop_vmhgfs
+           exitcode=$(($exitcode + $?))
+         fi
+
+         if [ "`is_vmmemctl_needed`" = 'yes' ]; then
+           vmware_exec 'Guest memory manager:' vmware_stop_vmmemctl
+           exitcode=$(($exitcode + $?))
+         fi
+
+        if [ "`is_crosstalk_needed`" = 'yes' ]; then
+          vmware_exec 'New Host-Guest communications path:' vmware_stop_crosstalk
+          exitcode=$(($exitcode + $?))
+        fi
+
+        if [ "`is_vmdesched_needed`" = 'yes' ]; then
+          vmware_stop_vmdesched
+          exitcode=$(($exitcode + $?))
+        fi
+      else
+         echo -n 'Skipping VMware Tools services shutdown on the host:'
+         vmware_success
+         echo
+      fi
+      if [ "$exitcode" -gt 0 ]; then
+         exit 1
+      fi
+
+      rm -f /var/lock/subsys/"$subsys"
+      ;;
+
+   status)
+      exitcode='0'
+
+      vmware_daemon_status guestd
+      exitcode=$(($exitcode + $?))
+
+      if [ "`is_vmdesched_needed`" = 'yes' ]; then
+         vmware_daemon_status vmdesched
+         exitcode=$(($exitcode + $?))
+      fi
+
+      if [ "$exitcode" -ne 0 ]; then
+         exit 1
+      fi
+      ;;
+
+   restart)
+      "$0" stop && "$0" start
+   ;;
+
+   *)
+      echo "Usage: `basename "$0"` {start|stop|status|restart}"
+      exit 1
+esac
+
+exit 0


Property changes on: projects/misc-sysadmin/kernel/vmware/vmware-tools
___________________________________________________________________
Added: svn:executable
   + *

Added: projects/misc-sysadmin/kernel/vmware/vmware-tools-patched.tgz
===================================================================
(Binary files differ)


Property changes on: projects/misc-sysadmin/kernel/vmware/vmware-tools-patched.tgz
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream

Added: projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz
===================================================================
(Binary files differ)


Property changes on: projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream

Added: projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz.sig
===================================================================
(Binary files differ)


Property changes on: projects/misc-sysadmin/kernel/vmware/vmwaretools-7.7.5_156745_for_2.6.29.tgz.sig
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream



More information about the tor-commits mailing list