[or-cvs] r18390: {torvm} Update patch for openssl 0.9.8j threaded linux-elf target. (torvm/trunk/build/kamikaze/patches)

coderman at seul.org coderman at seul.org
Wed Feb 4 14:33:05 UTC 2009


Author: coderman
Date: 2009-02-04 09:33:05 -0500 (Wed, 04 Feb 2009)
New Revision: 18390

Modified:
   torvm/trunk/build/kamikaze/patches/000-kamikaze-mod-openssl-386.patch
Log:
Update patch for openssl 0.9.8j threaded linux-elf target.

Modified: torvm/trunk/build/kamikaze/patches/000-kamikaze-mod-openssl-386.patch
===================================================================
--- torvm/trunk/build/kamikaze/patches/000-kamikaze-mod-openssl-386.patch	2009-02-04 14:15:41 UTC (rev 18389)
+++ torvm/trunk/build/kamikaze/patches/000-kamikaze-mod-openssl-386.patch	2009-02-04 14:33:05 UTC (rev 18390)
@@ -1,21 +1,13 @@
-diff -Naur kamikaze-orig/package/openssl/Makefile kamikaze-mod/package/openssl/Makefile
---- kamikaze-orig/package/openssl/Makefile	2008-07-13 16:02:14.664043000 +0000
-+++ kamikaze-mod/package/openssl/Makefile	2008-07-28 14:59:59.537015506 +0000
-@@ -65,25 +65,23 @@
- endef
- 
- 
--OPENSSL_NO_CIPHERS:= no-idea no-md2 no-mdc2 no-rc2 no-rc5 no-sha0 no-smime \
--					no-rmd160 no-aes192 no-ripemd no-camellia no-ans1 no-krb5
-+OPENSSL_NO_CIPHERS:= no-idea no-sha0 no-smime \
-+					no-camellia no-krb5
- ifeq ($(BOARD),ixp4xx)
- OPENSSL_OPTIONS:= shared no-ec no-err no-fips no-hw no-threads zlib-dynamic \
+diff -Naur a/package/openssl/Makefile b/package/openssl/Makefile
+--- a/package/openssl/Makefile	2009-01-19 09:50:41.579748000 +0000
++++ b/package/openssl/Makefile	2009-02-04 14:29:04.905022952 +0000
+@@ -73,19 +73,18 @@
+ OPENSSL_OPTIONS:= shared no-ec no-err no-hw no-threads zlib-dynamic \
  					no-sse2 no-perlasm --with-cryptodev
  else
--OPENSSL_OPTIONS:= shared no-ec no-err no-fips no-hw no-threads zlib-dynamic \
--					no-engines no-sse2 no-perlasm
-+OPENSSL_OPTIONS:= shared no-hw no-sse2 no-perlasm zlib-dynamic threads
+-OPENSSL_OPTIONS:= shared no-ec no-err no-hw no-threads zlib-dynamic \
++OPENSSL_OPTIONS:= shared no-ec no-err no-hw threads zlib-dynamic \
+ 					no-engines no-sse2 no-perlasm
  endif
  
  
@@ -31,1844 +23,3 @@
  			$(OPENSSL_NO_CIPHERS) \
  			$(OPENSSL_OPTIONS) \
  	)
-diff -Naur kamikaze-orig/package/openssl/patches/110-optimize-for-size.patch kamikaze-mod/package/openssl/patches/110-optimize-for-size.patch
---- kamikaze-orig/package/openssl/patches/110-optimize-for-size.patch	2008-05-31 15:52:11.560038000 +0000
-+++ kamikaze-mod/package/openssl/patches/110-optimize-for-size.patch	1970-01-01 00:00:00.000000000 +0000
-@@ -1,12 +0,0 @@
--diff -ur openssl-0.9.8h.orig/Configure openssl-0.9.8h/Configure
----- openssl-0.9.8h.orig/Configure	2008-05-31 17:27:47.000000000 +0200
--+++ openssl-0.9.8h/Configure	2008-05-31 17:28:16.000000000 +0200
--@@ -357,6 +357,8 @@
-- "linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-- "linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
-- "linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
--+# OpenWrt targets
--+"linux-openwrt","gcc:-DTERMIO \$(OPENWRT_OPTIMIZATION_FLAGS) -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-- 
-- #### *BSD [do see comment about ${BSDthreads} above!]
-- "BSD-generic32","gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL:${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-diff -Naur kamikaze-orig/package/openssl/patches/140-makefile-dirs.patch kamikaze-mod/package/openssl/patches/140-makefile-dirs.patch
---- kamikaze-orig/package/openssl/patches/140-makefile-dirs.patch	2007-06-04 11:25:53.556750000 +0000
-+++ kamikaze-mod/package/openssl/patches/140-makefile-dirs.patch	2008-07-28 14:58:19.014108832 +0000
-@@ -7,7 +7,7 @@
-  LIBZLIB=
-  
- -DIRS=   crypto ssl engines apps test tools
--+DIRS=   crypto ssl apps
-++DIRS=   crypto ssl engines apps
-  SHLIBDIRS= crypto ssl
-  
-  # dirs in crypto to build
-diff -Naur kamikaze-orig/package/openssl/patches/150-no_engines.patch kamikaze-mod/package/openssl/patches/150-no_engines.patch
---- kamikaze-orig/package/openssl/patches/150-no_engines.patch	2008-05-31 15:52:11.560038000 +0000
-+++ kamikaze-mod/package/openssl/patches/150-no_engines.patch	1970-01-01 00:00:00.000000000 +0000
-@@ -1,83 +0,0 @@
--diff -ur openssl-0.9.8h.orig/Configure openssl-0.9.8h/Configure
----- openssl-0.9.8h.orig/Configure	2008-05-31 17:31:04.000000000 +0200
--+++ openssl-0.9.8h/Configure	2008-05-31 17:30:47.000000000 +0200
--@@ -1712,6 +1712,11 @@
-- 	close(OUT);
--   }
--   
--+# ugly hack to disable engines
--+if($target eq "mingwx") {
--+	system("sed -e s/^LIB/XLIB/g -i engines/Makefile");
--+}
--+  
-- print <<EOF;
-- 
-- Configured for $target.
--diff -ur openssl-0.9.8h.orig/util/libeay.num openssl-0.9.8h/util/libeay.num
----- openssl-0.9.8h.orig/util/libeay.num	2008-05-31 17:27:46.000000000 +0200
--+++ openssl-0.9.8h/util/libeay.num	2008-05-31 17:30:47.000000000 +0200
--@@ -2071,7 +2071,6 @@
-- UI_add_error_string                     2633	EXIST::FUNCTION:
-- KRB5_CHECKSUM_free                      2634	EXIST::FUNCTION:
-- OCSP_REQUEST_get_ext                    2635	EXIST::FUNCTION:
---ENGINE_load_ubsec                       2636	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- ENGINE_register_all_digests             2637	EXIST::FUNCTION:ENGINE
-- PKEY_USAGE_PERIOD_it                    2638	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-- PKEY_USAGE_PERIOD_it                    2638	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
--@@ -2545,7 +2544,6 @@
-- AES_set_encrypt_key                     3024	EXIST::FUNCTION:AES
-- OCSP_resp_count                         3025	EXIST::FUNCTION:
-- KRB5_CHECKSUM_new                       3026	EXIST::FUNCTION:
---ENGINE_load_cswift                      3027	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- OCSP_onereq_get0_id                     3028	EXIST::FUNCTION:
-- ENGINE_set_default_ciphers              3029	EXIST::FUNCTION:ENGINE
-- NOTICEREF_it                            3030	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
--@@ -2576,7 +2574,6 @@
-- i2d_EXTENDED_KEY_USAGE                  3052	EXIST::FUNCTION:
-- i2d_OCSP_SIGNATURE                      3053	EXIST::FUNCTION:
-- asn1_enc_save                           3054	EXIST::FUNCTION:
---ENGINE_load_nuron                       3055	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- _ossl_old_des_pcbc_encrypt              3056	EXIST::FUNCTION:DES
-- PKCS12_MAC_DATA_it                      3057	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-- PKCS12_MAC_DATA_it                      3057	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
--@@ -2600,7 +2597,6 @@
-- i2d_KRB5_CHECKSUM                       3072	EXIST::FUNCTION:
-- ENGINE_set_table_flags                  3073	EXIST::FUNCTION:ENGINE
-- AES_options                             3074	EXIST::FUNCTION:AES
---ENGINE_load_chil                        3075	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- OCSP_id_cmp                             3076	EXIST::FUNCTION:
-- OCSP_BASICRESP_new                      3077	EXIST::FUNCTION:
-- OCSP_REQUEST_get_ext_by_NID             3078	EXIST::FUNCTION:
--@@ -2667,7 +2663,6 @@
-- OCSP_CRLID_it                           3127	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
-- i2d_KRB5_AUTHENTBODY                    3128	EXIST::FUNCTION:
-- OCSP_REQUEST_get_ext_count              3129	EXIST::FUNCTION:
---ENGINE_load_atalla                      3130	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- X509_NAME_it                            3131	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-- X509_NAME_it                            3131	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
-- USERNOTICE_it                           3132	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
--@@ -2762,8 +2757,6 @@
-- DES_read_password                       3207	EXIST::FUNCTION:DES
-- UI_UTIL_read_pw                         3208	EXIST::FUNCTION:
-- UI_UTIL_read_pw_string                  3209	EXIST::FUNCTION:
---ENGINE_load_aep                         3210	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
---ENGINE_load_sureware                    3211	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- OPENSSL_add_all_algorithms_noconf       3212	EXIST:!VMS:FUNCTION:
-- OPENSSL_add_all_algo_noconf             3212	EXIST:VMS:FUNCTION:
-- OPENSSL_add_all_algorithms_conf         3213	EXIST:!VMS:FUNCTION:
--@@ -2772,7 +2765,6 @@
-- AES_ofb128_encrypt                      3215	EXIST::FUNCTION:AES
-- AES_ctr128_encrypt                      3216	EXIST::FUNCTION:AES
-- AES_cfb128_encrypt                      3217	EXIST::FUNCTION:AES
---ENGINE_load_4758cca                     3218	EXIST::FUNCTION:ENGINE,STATIC_ENGINE
-- _ossl_096_des_random_seed               3219	EXIST::FUNCTION:DES
-- EVP_aes_256_ofb                         3220	EXIST::FUNCTION:AES
-- EVP_aes_192_ofb                         3221	EXIST::FUNCTION:AES
--@@ -3107,7 +3099,6 @@
-- STORE_method_set_modify_function        3530	EXIST:!VMS:FUNCTION:
-- STORE_meth_set_modify_fn                3530	EXIST:VMS:FUNCTION:
-- STORE_parse_attrs_next                  3531	EXIST::FUNCTION:
---ENGINE_load_padlock                     3532	EXIST::FUNCTION:ENGINE
-- EC_GROUP_set_curve_name                 3533	EXIST::FUNCTION:EC
-- X509_CERT_PAIR_it                       3534	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
-- X509_CERT_PAIR_it                       3534	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
-diff -Naur kamikaze-orig/package/openssl/patches/200-ocf.patch kamikaze-mod/package/openssl/patches/200-ocf.patch
---- kamikaze-orig/package/openssl/patches/200-ocf.patch	2008-07-12 15:43:16.473511000 +0000
-+++ kamikaze-mod/package/openssl/patches/200-ocf.patch	1970-01-01 00:00:00.000000000 +0000
-@@ -1,1192 +0,0 @@
--diff -Nur openssl-0.9.8h/Configure openssl-0.9.8h-ocf/Configure
----- openssl-0.9.8h/Configure	2008-05-02 01:11:30.000000000 +0200
--+++ openssl-0.9.8h-ocf/Configure	2008-07-12 04:18:53.000000000 +0200
--@@ -34,6 +34,8 @@
-- #		(Default: KRB5_DIR/include)
-- # --with-krb5-flavor  Declare what flavor of Kerberos 5 is used.  Currently
-- #		supported values are "MIT" and "Heimdal".  A value is required.
--+# --with-cryptodev Force support for cryptodev (ie., ocf-linux)
--+# --with-cryptodev-digests Force support for cryptodev digests (generally slow)
-- #
-- # --test-sanity Make a number of sanity checks on the data in this file.
-- #               This is a debugging tool for OpenSSL developers.
--@@ -539,6 +541,9 @@
-- ##### Compaq Non-Stop Kernel (Tandem)
-- "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
-- 
--+# uClinux
--+"uClinux-dist","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):BN_LLONG::::::::::::\$(LIBSSL_dlfcn):linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}",
--+
-- );
-- 
-- my @MK1MF_Builds=qw(VC-WIN64I VC-WIN64A
--@@ -588,6 +593,8 @@
-- my $no_asm=0;
-- my $no_dso=0;
-- my $no_gmp=0;
--+my $have_cryptodev=0;
--+my $use_cryptodev_digests=0;
-- my @skip=();
-- my $Makefile="Makefile";
-- my $des_locl="crypto/des/des_locl.h";
--@@ -714,6 +721,14 @@
-- 			{
-- 			exit(&test_sanity());
-- 			}
--+		elsif (/^--with-cryptodev$/)
--+			{
--+				$have_cryptodev = 1;
--+			}
--+		elsif (/^--with-cryptodev-digests$/)
--+			{
--+				$use_cryptodev_digests = 1;
--+			}
-- 		elsif (/^reconfigure/ || /^reconf/)
-- 			{
-- 			if (open(IN,"<$Makefile"))
--@@ -922,6 +937,7 @@
-- 			print " OPENSSL_NO_$ALGO";
-- 		
-- 			if (/^err$/)	{ $flags .= "-DOPENSSL_NO_ERR "; }
--+			elsif (/^hw$/)	{ $flags .= "-DOPENSSL_NO_HW "; }
-- 			elsif (/^asm$/)	{ $no_asm = 1; }
-- 			}
-- 		else
--@@ -1062,6 +1078,16 @@
-- 		   $withargs{"krb5-dir"} ne "";
-- 	}
-- 
--+# enable the linux cryptodev (ocf-linux) support
--+if ($have_cryptodev)
--+	{
--+	if ($use_cryptodev_digests)
--+		{
--+		$cflags = "-DUSE_CRYPTODEV_DIGESTS $cflags";
--+		}
--+	$cflags = "-DHAVE_CRYPTODEV $cflags";
--+	}
--+
-- # The DSO code currently always implements all functions so that no
-- # applications will have to worry about that from a compilation point
-- # of view. However, the "method"s may return zero unless that platform
--diff -Nur openssl-0.9.8h/INSTALL openssl-0.9.8h-ocf/INSTALL
----- openssl-0.9.8h/INSTALL	2008-04-07 08:35:41.000000000 +0200
--+++ openssl-0.9.8h-ocf/INSTALL	2008-07-12 04:18:53.000000000 +0200
--@@ -103,6 +103,12 @@
--                 define preprocessor symbols, specify additional libraries,
--                 library directories or other compiler options.
-- 
--+  --with-cryptodev Enabled the BSD cryptodev engine even if we are not using
--+		BSD.  Useful if you are running ocf-linux or something
--+		similar.  Once enabled you can also enable the use of
--+		cryptodev digests,  with is usually slower unless you have
--+		large amounts data.  Use --with-cryptodev-digests to force
--+		it.
-- 
--  Installation in Detail
--  ----------------------
--diff -Nur openssl-0.9.8h/Makefile.org openssl-0.9.8h-ocf/Makefile.org
----- openssl-0.9.8h/Makefile.org	2008-04-04 01:03:39.000000000 +0200
--+++ openssl-0.9.8h-ocf/Makefile.org	2008-07-12 04:18:53.000000000 +0200
--@@ -367,7 +367,7 @@
-- 
-- links:
-- 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
---	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
--+	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(HEADER) $(EXHEADER)
-- 	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-- 
-- gentests:
--diff -Nur openssl-0.9.8h/Makefile.shared openssl-0.9.8h-ocf/Makefile.shared
----- openssl-0.9.8h/Makefile.shared	2007-09-16 16:11:51.000000000 +0200
--+++ openssl-0.9.8h-ocf/Makefile.shared	2008-07-12 04:18:53.000000000 +0200
--@@ -6,13 +6,13 @@
-- # properly
-- 
-- # CC contains the current compiler.  This one MUST be defined
---CC=cc
---CFLAGS=$(CFLAG)
--+CC?=cc
--+CFLAGS?=$(CFLAG)
-- # LDFLAGS contains flags to be used when temporary object files (when building
-- # shared libraries) are created, or when an application is linked.
-- # SHARED_LDFLAGS contains flags to be used when the shared library is created.
---LDFLAGS=
---SHARED_LDFLAGS=
--+LDFLAGS?=
--+SHARED_LDFLAGS?=
-- 
-- # LIBNAME contains just the name of the library, without prefix ("lib"
-- # on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
--diff -Nur openssl-0.9.8h/apps/apps.h openssl-0.9.8h-ocf/apps/apps.h
----- openssl-0.9.8h/apps/apps.h	2007-10-12 02:00:10.000000000 +0200
--+++ openssl-0.9.8h-ocf/apps/apps.h	2008-07-12 04:18:53.000000000 +0200
--@@ -112,7 +112,7 @@
-- #ifndef HEADER_APPS_H
-- #define HEADER_APPS_H
-- 
---#include "e_os.h"
--+#include <openssl/e_os.h>
-- 
-- #include <openssl/bio.h>
-- #include <openssl/x509.h>
--diff -Nur openssl-0.9.8h/apps/progs.h openssl-0.9.8h-ocf/apps/progs.h
----- openssl-0.9.8h/apps/progs.h	2008-04-04 01:03:41.000000000 +0200
--+++ openssl-0.9.8h-ocf/apps/progs.h	2008-07-12 04:18:53.000000000 +0200
--@@ -129,7 +129,9 @@
-- #ifndef OPENSSL_NO_ENGINE
-- 	{FUNC_TYPE_GENERAL,"engine",engine_main},
-- #endif
--+#ifndef OPENSSL_NO_OCSP
-- 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
--+#endif
-- 	{FUNC_TYPE_GENERAL,"prime",prime_main},
-- #ifndef OPENSSL_NO_MD2
-- 	{FUNC_TYPE_MD,"md2",dgst_main},
--diff -Nur openssl-0.9.8h/apps/speed.c openssl-0.9.8h-ocf/apps/speed.c
----- openssl-0.9.8h/apps/speed.c	2007-11-15 14:33:47.000000000 +0100
--+++ openssl-0.9.8h-ocf/apps/speed.c	2008-07-12 04:18:53.000000000 +0200
--@@ -292,7 +292,7 @@
--   "evp","sha256","sha512",
--   "aes-128 ige","aes-192 ige","aes-256 ige"};
-- static double results[ALGOR_NUM][SIZE_NUM];
---static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
--+static int lengths[SIZE_NUM]={16,64,256,1024,2*1024,4*1024};
-- static double rsa_results[RSA_NUM][2];
-- static double dsa_results[DSA_NUM][2];
-- #ifndef OPENSSL_NO_ECDSA
--@@ -328,6 +328,79 @@
-- #define START	0
-- #define STOP	1
-- 
--+#ifdef __linux__
--+/*
--+ * record CPU usage as well
--+ */
--+
--+static int do_cpu = 0;
--+
--+struct cpu_stat {
--+	unsigned int	user;
--+	unsigned int	nice;
--+	unsigned int	system;
--+	unsigned int	idle;
--+	unsigned int	total;
--+};
--+
--+static unsigned int cpu_usage[ALGOR_NUM][SIZE_NUM];
--+static unsigned int rsa_cpu_usage[RSA_NUM][2];
--+static unsigned int dsa_cpu_usage[DSA_NUM][2];
--+static struct cpu_stat cpu_start, cpu_finish;
--+
--+static void
--+get_cpu(int s)
--+{
--+	FILE *fp = NULL;
--+	unsigned char	buf[80];
--+	struct cpu_stat *st = s == START ? &cpu_start : &cpu_finish;
--+
--+	memset(st, 0, sizeof(*st));
--+
--+	if (fp == NULL)
--+		fp = fopen("/proc/stat", "r");
--+	if (!fp)
--+		return;
--+	if (fseek(fp, 0, SEEK_SET) == -1) {
--+		fclose(fp);
--+		return;
--+	}
--+	fscanf(fp, "%s %d %d %d %d", &buf[0], &st->user, &st->nice,
--+		&st->system, &st->idle);
--+	st->total = st->user + st->nice + st->system + st->idle;
--+	fclose(fp);
--+}
--+
--+static unsigned int
--+calc_cpu()
--+{
--+	unsigned int total, res;
--+
--+	total  = cpu_finish.total - cpu_start.total;
--+	if (total <= 0)
--+		return 0;
--+#if 1 // busy
--+	res   = ((cpu_finish.system + cpu_finish.user + cpu_finish.nice) -
--+			 (cpu_start.system + cpu_start.user + cpu_start.nice)) *
--+			 100 / total;
--+#endif
--+#if 0 // system
--+	res   = (cpu_finish.system - cpu_start.system) * 100 / total;
--+#endif
--+#if 0 // user
--+	res   = (cpu_finish.user   - cpu_start.user)   * 100 / total;
--+#endif
--+#if 0 // nice
--+	res   = (cpu_finish.nice   - cpu_start.nice)   * 100 / total;
--+#endif
--+#if 0 // idle
--+	res   = (cpu_finish.idle   - cpu_start.idle)   * 100 / total;
--+#endif
--+	return(res);
--+}
--+
--+#endif
--+
-- #if defined(OPENSSL_SYS_NETWARE)
-- 
--    /* for NetWare the best we can do is use clock() which returns the
--@@ -358,6 +431,11 @@
-- 	{
-- 	double ret;
-- 
--+#ifdef __linux__
--+	if (do_cpu)
--+		get_cpu(s);
--+#endif
--+
-- #ifdef USE_TOD
-- 	if(usertime)
-- 		{
--@@ -832,6 +910,14 @@
-- 			j--;	/* Otherwise, -elapsed gets confused with
-- 				   an algorithm. */
-- 			}
--+#ifdef __linux__
--+		else if	((argc > 0) && (strcmp(*argv,"-cpu") == 0))
--+			{
--+			do_cpu = 1;
--+			j--;	/* Otherwise, -cpu gets confused with
--+				   an algorithm. */
--+			}
--+#endif
-- 		else if	((argc > 0) && (strcmp(*argv,"-evp") == 0))
-- 			{
-- 			argc--;
--@@ -1260,6 +1346,9 @@
-- #ifdef HAVE_FORK
-- 			BIO_printf(bio_err,"-multi n        run n benchmarks in parallel.\n");
-- #endif
--+#ifdef __linux__
--+			BIO_printf(bio_err,"-cpu            calculate cpu utilisation.\n");
--+#endif
-- 			goto end;
-- 			}
-- 		argc--;
--@@ -1267,11 +1356,6 @@
-- 		j++;
-- 		}
-- 
---#ifdef HAVE_FORK
---	if(multi && do_multi(multi))
---		goto show_res;
---#endif
---
-- 	if (j == 0)
-- 		{
-- 		for (i=0; i<ALGOR_NUM; i++)
--@@ -1604,6 +1688,11 @@
-- 	signal(SIGALRM,sig_done);
-- #endif /* SIGALRM */
-- 
--+#ifdef HAVE_FORK /* DM */
--+	if(multi && do_multi(multi))
--+		goto show_res;
--+#endif
--+
-- #ifndef OPENSSL_NO_MD2
-- 	if (doit[D_MD2])
-- 		{
--@@ -2033,8 +2122,6 @@
-- 				/* -O3 -fschedule-insns messes up an
-- 				 * optimization here!  names[D_EVP]
-- 				 * somehow becomes NULL */
---				print_message(names[D_EVP],save_count,
---					lengths[j]);
-- 
-- 				EVP_CIPHER_CTX_init(&ctx);
-- 				if(decrypt)
--@@ -2043,6 +2130,9 @@
-- 					EVP_EncryptInit_ex(&ctx,evp_cipher,NULL,key16,iv);
-- 				EVP_CIPHER_CTX_set_padding(&ctx, 0);
-- 
--+				print_message(names[D_EVP],save_count,
--+					lengths[j]);
--+
-- 				Time_F(START);
-- 				if(decrypt)
-- 					for (count=0,run=1; COND(save_count*4*lengths[0]/lengths[j]); count++)
--@@ -2107,6 +2197,8 @@
-- 					}
-- 				}
-- 			d=Time_F(STOP);
--+			if (do_cpu)
--+				rsa_cpu_usage[j][0] = calc_cpu();
-- 			BIO_printf(bio_err,mr ? "+R1:%ld:%d:%.2f\n"
-- 				   : "%ld %d bit private RSA's in %.2fs\n",
-- 				   count,rsa_bits[j],d);
--@@ -2142,6 +2234,8 @@
-- 					}
-- 				}
-- 			d=Time_F(STOP);
--+			if (do_cpu)
--+				rsa_cpu_usage[j][1] = calc_cpu();
-- 			BIO_printf(bio_err,mr ? "+R2:%ld:%d:%.2f\n"
-- 				   : "%ld %d bit public RSA's in %.2fs\n",
-- 				   count,rsa_bits[j],d);
--@@ -2201,6 +2295,8 @@
-- 					}
-- 				}
-- 			d=Time_F(STOP);
--+			if (do_cpu)
--+				dsa_cpu_usage[j][0] = calc_cpu();
-- 			BIO_printf(bio_err,mr ? "+R3:%ld:%d:%.2f\n"
-- 				   : "%ld %d bit DSA signs in %.2fs\n",
-- 				   count,dsa_bits[j],d);
--@@ -2236,6 +2332,8 @@
-- 					}
-- 				}
-- 			d=Time_F(STOP);
--+			if (do_cpu)
--+				dsa_cpu_usage[j][1] = calc_cpu();
-- 			BIO_printf(bio_err,mr ? "+R4:%ld:%d:%.2f\n"
-- 				   : "%ld %d bit DSA verify in %.2fs\n",
-- 				   count,dsa_bits[j],d);
--@@ -2530,14 +2628,23 @@
-- 			fprintf(stdout,"The 'numbers' are in 1000s of bytes per second processed.\n"); 
-- 			fprintf(stdout,"type        ");
-- 			}
---		for (j=0;  j<SIZE_NUM; j++)
--+		for (j=0;  j<SIZE_NUM; j++) {
-- 			fprintf(stdout,mr ? ":%d" : "%7d bytes",lengths[j]);
--+			if (do_cpu && !mr)
--+				fprintf(stdout, " /cpu");
--+		}
-- 		fprintf(stdout,"\n");
-- 		}
-- 
-- 	for (k=0; k<ALGOR_NUM; k++)
-- 		{
-- 		if (!doit[k]) continue;
--+		if (k == D_EVP) {
--+			if (evp_cipher)
--+				names[D_EVP]=OBJ_nid2ln(evp_cipher->nid);
--+			else
--+				names[D_EVP]=OBJ_nid2ln(evp_md->type);
--+		}
-- 		if(mr)
-- 			fprintf(stdout,"+F:%d:%s",k,names[k]);
-- 		else
--@@ -2548,6 +2655,8 @@
-- 				fprintf(stdout," %11.2fk",results[k][j]/1e3);
-- 			else
-- 				fprintf(stdout,mr ? ":%.2f" : " %11.2f ",results[k][j]);
--+			if (do_cpu)
--+				fprintf(stdout, mr ? "/%d" : "/%%%-3d", cpu_usage[k][j]);
-- 			}
-- 		fprintf(stdout,"\n");
-- 		}
--@@ -2562,13 +2671,18 @@
-- 			j=0;
-- 			}
-- 		if(mr)
---			fprintf(stdout,"+F2:%u:%u:%f:%f\n",
---				k,rsa_bits[k],rsa_results[k][0],
---				rsa_results[k][1]);
---		else
---			fprintf(stdout,"rsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
---				rsa_bits[k],rsa_results[k][0],rsa_results[k][1],
---				1.0/rsa_results[k][0],1.0/rsa_results[k][1]);
--+			fprintf(stdout,"+F2:%u:%u:%f", k,rsa_bits[k],rsa_results[k][0]);
--+		else
--+			fprintf(stdout,"rsa %4u bits %8.6fs",rsa_bits[k],rsa_results[k][0]);
--+		if (do_cpu)
--+			fprintf(stdout, mr ? "/%d": "/%%%-3d", rsa_cpu_usage[k][0]);
--+		fprintf(stdout, mr ? ":%f" : " %8.6fs", rsa_results[k][1]);
--+		if (do_cpu)
--+			fprintf(stdout, mr ? "/%d": "/%%%-3d", rsa_cpu_usage[k][1]);
--+		if(!mr)
--+			fprintf(stdout, " %8.1f %8.1f",
--+					1.0/rsa_results[k][0],1.0/rsa_results[k][1]);
--+		fprintf(stdout, "\n");
-- 		}
-- #endif
-- #ifndef OPENSSL_NO_DSA
--@@ -2582,12 +2696,18 @@
-- 			j=0;
-- 			}
-- 		if(mr)
---			fprintf(stdout,"+F3:%u:%u:%f:%f\n",
---				k,dsa_bits[k],dsa_results[k][0],dsa_results[k][1]);
--+			fprintf(stdout,"+F3:%u:%u:%f", k,dsa_bits[k],dsa_results[k][0]);
-- 		else
---			fprintf(stdout,"dsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
---				dsa_bits[k],dsa_results[k][0],dsa_results[k][1],
---				1.0/dsa_results[k][0],1.0/dsa_results[k][1]);
--+			fprintf(stdout,"dsa %4u bits %8.6fs",dsa_bits[k],dsa_results[k][0]);
--+		if (do_cpu)
--+			fprintf(stdout, mr ? "/%d": "/%%%-3d", dsa_cpu_usage[k][0]);
--+		fprintf(stdout, mr ? ":%f" : " %8.6fs", dsa_results[k][1]);
--+		if (do_cpu)
--+			fprintf(stdout, mr ? "/%d": "/%%%-3d", dsa_cpu_usage[k][1]);
--+		if(!mr)
--+			fprintf(stdout, " %8.1f %8.1f",
--+					1.0/dsa_results[k][0],1.0/dsa_results[k][1]);
--+		fprintf(stdout, "\n");
-- 		}
-- #endif
-- #ifndef OPENSSL_NO_ECDSA
--@@ -2712,8 +2832,10 @@
-- 
-- static void print_result(int alg,int run_no,int count,double time_used)
-- 	{
---	BIO_printf(bio_err,mr ? "+R:%d:%s:%f\n"
---		   : "%d %s's in %.2fs\n",count,names[alg],time_used);
--+	if (do_cpu)
--+	    cpu_usage[alg][run_no] = calc_cpu();
--+	BIO_printf(bio_err,mr ? "+R:%ld:%s:%f\n"
--+		   : "%ld %s's in %.2fs\n",count,names[alg],time_used);
-- 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
-- 	}
-- 
--@@ -2806,29 +2928,11 @@
-- 				p=buf+3;
-- 				alg=atoi(sstrsep(&p,sep));
-- 				sstrsep(&p,sep);
---				for(j=0 ; j < SIZE_NUM ; ++j)
--+				for(j=0 ; j < SIZE_NUM ; ++j) {
--+					if (do_cpu && strchr(p, '/'))
--+						cpu_usage[alg][j] = atoi(strchr(p, '/') + 1);
-- 					results[alg][j]+=atof(sstrsep(&p,sep));
-- 				}
---			else if(!strncmp(buf,"+F2:",4))
---				{
---				int k;
---				double d;
---				
---				p=buf+4;
---				k=atoi(sstrsep(&p,sep));
---				sstrsep(&p,sep);
---
---				d=atof(sstrsep(&p,sep));
---				if(n)
---					rsa_results[k][0]=1/(1/rsa_results[k][0]+1/d);
---				else
---					rsa_results[k][0]=d;
---
---				d=atof(sstrsep(&p,sep));
---				if(n)
---					rsa_results[k][1]=1/(1/rsa_results[k][1]+1/d);
---				else
---					rsa_results[k][1]=d;
-- 				}
-- 			else if(!strncmp(buf,"+F2:",4))
-- 				{
--@@ -2839,12 +2943,18 @@
-- 				k=atoi(sstrsep(&p,sep));
-- 				sstrsep(&p,sep);
-- 
--+				/* before we move the token along */
--+				if (do_cpu && strchr(p, '/'))
--+					rsa_cpu_usage[k][0] = atoi(strchr(p, '/') + 1);
-- 				d=atof(sstrsep(&p,sep));
-- 				if(n)
-- 					rsa_results[k][0]=1/(1/rsa_results[k][0]+1/d);
-- 				else
-- 					rsa_results[k][0]=d;
-- 
--+				/* before we move the token along */
--+				if (do_cpu && strchr(p, '/'))
--+					rsa_cpu_usage[k][1] = atoi(strchr(p, '/') + 1);
-- 				d=atof(sstrsep(&p,sep));
-- 				if(n)
-- 					rsa_results[k][1]=1/(1/rsa_results[k][1]+1/d);
--@@ -2860,12 +2970,18 @@
-- 				k=atoi(sstrsep(&p,sep));
-- 				sstrsep(&p,sep);
-- 
--+				/* before we move the token along */
--+				if (do_cpu && strchr(p, '/'))
--+					dsa_cpu_usage[k][0] = atoi(strchr(p, '/') + 1);
-- 				d=atof(sstrsep(&p,sep));
-- 				if(n)
-- 					dsa_results[k][0]=1/(1/dsa_results[k][0]+1/d);
-- 				else
-- 					dsa_results[k][0]=d;
-- 
--+				/* before we move the token along */
--+				if (do_cpu && strchr(p, '/'))
--+					dsa_cpu_usage[k][1] = atoi(strchr(p, '/') + 1);
-- 				d=atof(sstrsep(&p,sep));
-- 				if(n)
-- 					dsa_results[k][1]=1/(1/dsa_results[k][1]+1/d);
--diff -Nur openssl-0.9.8h/config openssl-0.9.8h-ocf/config
----- openssl-0.9.8h/config	2007-08-01 13:21:35.000000000 +0200
--+++ openssl-0.9.8h-ocf/config	2008-07-12 04:18:53.000000000 +0200
--@@ -48,10 +48,10 @@
-- 
-- # First get uname entries that we use below
-- 
---MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
---RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
---SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
---VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
--+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
--+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
--+[ "$SYSTEM" ]  || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
--+[ "$VERSION" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
-- 
-- 
-- # Now test for ISC and SCO, since it is has a braindamaged uname.
--@@ -270,7 +270,7 @@
-- 		echo "ppc-apple-darwin${VERSION}"
-- 		;;
-- 	    *)
---		echo "i386-apple-darwin${VERSION}"
--+		echo "${MACHINE}-apple-darwin${VERSION}"
-- 		;;
-- 	esac
-- 	exit 0
--@@ -401,9 +401,9 @@
-- 
-- # figure out if gcc is available and if so we use it otherwise
-- # we fallback to whatever cc does on the system
---GCCVER=`(gcc -dumpversion) 2>/dev/null`
--+CC="${CC:-gcc}"
--+GCCVER=`(${CC} -dumpversion) 2>/dev/null`
-- if [ "$GCCVER" != "" ]; then
---  CC=gcc
--   # then strip off whatever prefix egcs prepends the number with...
--   # Hopefully, this will work for any future prefixes as well.
--   GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
--@@ -413,7 +413,7 @@
--   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
--   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-- else
---  CC=cc
--+  CC="${CC:-cc}"
-- fi
-- GCCVER=${GCCVER:-0}
-- if [ "$SYSTEM" = "HP-UX" ];then
--@@ -482,6 +482,9 @@
-- # script above so we end up with values in vars but that would take
-- # more time that I want to waste at the moment
-- case "$GUESSOS" in
--+  uClinux*)
--+    OUT=uClinux-dist
--+	;;
--   mips2-sgi-irix)
-- 	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
-- 	CPU=${CPU:-0}
--diff -Nur openssl-0.9.8h/crypto/cryptlib.h openssl-0.9.8h-ocf/crypto/cryptlib.h
----- openssl-0.9.8h/crypto/cryptlib.h	2005-05-21 15:19:44.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/cryptlib.h	2008-07-12 04:18:53.000000000 +0200
--@@ -62,7 +62,7 @@
-- #include <stdlib.h>
-- #include <string.h>
-- 
---#include "e_os.h"
--+#include <openssl/e_os.h>
-- 
-- #ifdef OPENSSL_USE_APPLINK
-- #define BIO_FLAGS_UPLINK 0x8000
--diff -Nur openssl-0.9.8h/crypto/engine/eng_all.c openssl-0.9.8h-ocf/crypto/engine/eng_all.c
----- openssl-0.9.8h/crypto/engine/eng_all.c	2007-01-04 23:55:25.000000000 +0100
--+++ openssl-0.9.8h-ocf/crypto/engine/eng_all.c	2008-07-12 04:18:53.000000000 +0200
--@@ -104,13 +104,13 @@
-- #endif
-- #endif
-- #ifndef OPENSSL_NO_HW
---#if defined(__OpenBSD__) || defined(__FreeBSD__)
--+#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
-- 	ENGINE_load_cryptodev();
-- #endif
-- #endif
-- 	}
-- 
---#if defined(__OpenBSD__) || defined(__FreeBSD__)
--+#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
-- void ENGINE_setup_bsd_cryptodev(void) {
-- 	static int bsd_cryptodev_default_loaded = 0;
-- 	if (!bsd_cryptodev_default_loaded) {
--diff -Nur openssl-0.9.8h/crypto/engine/eng_cryptodev.c openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c
----- openssl-0.9.8h/crypto/engine/eng_cryptodev.c	2004-06-15 13:45:42.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c	2008-07-12 04:18:53.000000000 +0200
--@@ -68,6 +68,16 @@
-- struct dev_crypto_state {
-- 	struct session_op d_sess;
-- 	int d_fd;
--+
--+#ifdef USE_CRYPTODEV_DIGESTS
--+	char dummy_mac_key[20];
--+
--+	unsigned char digest_res[20];
--+	char *mac_data;
--+	int mac_len;
--+
--+	int copy;
--+#endif
-- };
-- 
-- static u_int32_t cryptodev_asymfeat = 0;
--@@ -75,9 +85,11 @@
-- static int get_asym_dev_crypto(void);
-- static int open_dev_crypto(void);
-- static int get_dev_crypto(void);
--+#if 0
-- static int cryptodev_max_iv(int cipher);
-- static int cryptodev_key_length_valid(int cipher, int len);
-- static int cipher_nid_to_cryptodev(int nid);
--+#endif
-- static int get_cryptodev_ciphers(const int **cnids);
-- static int get_cryptodev_digests(const int **cnids);
-- static int cryptodev_usable_ciphers(const int **nids);
--@@ -100,7 +112,7 @@
-- static int cryptodev_bn_mod_exp(BIGNUM *r, const BIGNUM *a,
--     const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-- static int cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I,
---    RSA *rsa);
--+    RSA *rsa, BN_CTX *ctx);
-- static int cryptodev_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx);
-- static int cryptodev_dsa_bn_mod_exp(DSA *dsa, BIGNUM *r, BIGNUM *a,
--     const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
--@@ -133,6 +145,7 @@
-- 	{ CRYPTO_DES_CBC,		NID_des_cbc,		8,	 8, },
-- 	{ CRYPTO_3DES_CBC,		NID_des_ede3_cbc,	8,	24, },
-- 	{ CRYPTO_AES_CBC,		NID_aes_128_cbc,	16,	16, },
--+	{ CRYPTO_AES_CBC,		NID_aes_256_cbc,	16,	32, },
-- 	{ CRYPTO_BLF_CBC,		NID_bf_cbc,		8,	16, },
-- 	{ CRYPTO_CAST_CBC,		NID_cast5_cbc,		8,	16, },
-- 	{ CRYPTO_SKIPJACK_CBC,		NID_undef,		0,	 0, },
--@@ -142,14 +155,15 @@
-- static struct {
-- 	int	id;
-- 	int	nid;
--+	int 	keylen;
-- } digests[] = {
---	{ CRYPTO_SHA1_HMAC,		NID_hmacWithSHA1,	},
---	{ CRYPTO_RIPEMD160_HMAC,	NID_ripemd160,		},
---	{ CRYPTO_MD5_KPDK,		NID_undef,		},
---	{ CRYPTO_SHA1_KPDK,		NID_undef,		},
---	{ CRYPTO_MD5,			NID_md5,		},
---	{ CRYPTO_SHA1,			NID_undef,		},
---	{ 0,				NID_undef,		},
--+	{ CRYPTO_SHA1_HMAC,		NID_hmacWithSHA1,	20},
--+	{ CRYPTO_RIPEMD160_HMAC,	NID_ripemd160,		16/*?*/},
--+	{ CRYPTO_MD5_KPDK,		NID_undef,		0},
--+	{ CRYPTO_SHA1_KPDK,		NID_undef,		0},
--+	{ CRYPTO_MD5,			NID_md5,		16},
--+	{ CRYPTO_SHA1,			NID_sha1,		20},
--+	{ 0,				NID_undef,		0},
-- };
-- 
-- /*
--@@ -176,10 +190,17 @@
-- static int
-- get_dev_crypto(void)
-- {
---	int fd, retfd;
--+	static int fd = -1;
--+	int retfd;
-- 
---	if ((fd = open_dev_crypto()) == -1)
---		return (-1);
--+	if (fd == -1) {
--+		if ((fd = open_dev_crypto()) == -1)
--+			return (-1);
--+		if (fcntl(fd, F_SETFD, 1) == -1) {
--+			close(fd);
--+			return (-1);
--+		}
--+	}
-- 	if (ioctl(fd, CRIOGET, &retfd) == -1)
-- 		return (-1);
-- 
--@@ -202,6 +223,7 @@
-- 	return fd;
-- }
-- 
--+#if 0
-- /*
--  * XXXX this needs to be set for each alg - and determined from
--  * a running card.
--@@ -245,6 +267,7 @@
-- 			return (ciphers[i].id);
-- 	return (0);
-- }
--+#endif
-- 
-- /*
--  * Find out what ciphers /dev/crypto will let us have a session for.
--@@ -264,7 +287,7 @@
-- 		return (0);
-- 	}
-- 	memset(&sess, 0, sizeof(sess));
---	sess.key = (caddr_t)"123456781234567812345678";
--+	sess.key = (caddr_t)"123456789abcdefghijklmno";
-- 
-- 	for (i = 0; ciphers[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-- 		if (ciphers[i].nid == NID_undef)
--@@ -303,10 +326,12 @@
-- 		return (0);
-- 	}
-- 	memset(&sess, 0, sizeof(sess));
--+	sess.mackey = (caddr_t)"123456789abcdefghijklmno";
-- 	for (i = 0; digests[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-- 		if (digests[i].nid == NID_undef)
-- 			continue;
-- 		sess.mac = digests[i].id;
--+		sess.mackeylen = digests[i].keylen;
-- 		sess.cipher = 0;
-- 		if (ioctl(fd, CIOCGSESSION, &sess) != -1 &&
-- 		    ioctl(fd, CIOCFSESSION, &sess.ses) != -1)
--@@ -351,6 +376,9 @@
-- static int
-- cryptodev_usable_digests(const int **nids)
-- {
--+#ifdef USE_CRYPTODEV_DIGESTS
--+	return (get_cryptodev_digests(nids));
--+#else
-- 	/*
-- 	 * XXXX just disable all digests for now, because it sucks.
-- 	 * we need a better way to decide this - i.e. I may not
--@@ -365,6 +393,7 @@
-- 	 */
-- 	*nids = NULL;
-- 	return (0);
--+#endif
-- }
-- 
-- static int
--@@ -427,16 +456,20 @@
-- {
-- 	struct dev_crypto_state *state = ctx->cipher_data;
-- 	struct session_op *sess = &state->d_sess;
---	int cipher;
---
---	if ((cipher = cipher_nid_to_cryptodev(ctx->cipher->nid)) == NID_undef)
---		return (0);
--+	int cipher, i;
-- 
---	if (ctx->cipher->iv_len > cryptodev_max_iv(cipher))
---		return (0);
--+	for (i = 0; ciphers[i].id; i++)
--+		if (ctx->cipher->nid == ciphers[i].nid &&
--+		    ctx->cipher->iv_len <= ciphers[i].ivmax &&
--+		    ctx->key_len == ciphers[i].keylen) {
--+			cipher = ciphers[i].id;
--+			break;
--+		}
-- 
---	if (!cryptodev_key_length_valid(cipher, ctx->key_len))
--+	if (!ciphers[i].id) {
--+		state->d_fd = -1;
-- 		return (0);
--+	}
-- 
-- 	memset(sess, 0, sizeof(struct session_op));
-- 
--@@ -563,6 +596,19 @@
-- 	NULL
-- };
-- 
--+const EVP_CIPHER cryptodev_aes_256_cbc = {
--+	NID_aes_256_cbc,
--+	16, 32, 16,
--+	EVP_CIPH_CBC_MODE,
--+	cryptodev_init_key,
--+	cryptodev_cipher,
--+	cryptodev_cleanup,
--+	sizeof(struct dev_crypto_state),
--+	EVP_CIPHER_set_asn1_iv,
--+	EVP_CIPHER_get_asn1_iv,
--+	NULL
--+};
--+
-- /*
--  * Registered by the ENGINE when used to find out how to deal with
--  * a particular NID in the ENGINE. this says what we'll do at the
--@@ -591,6 +637,9 @@
-- 	case NID_aes_128_cbc:
-- 		*cipher = &cryptodev_aes_cbc;
-- 		break;
--+	case NID_aes_256_cbc:
--+		*cipher = &cryptodev_aes_256_cbc;
--+		break;
-- 	default:
-- 		*cipher = NULL;
-- 		break;
--@@ -598,6 +647,234 @@
-- 	return (*cipher != NULL);
-- }
-- 
--+
--+#ifdef USE_CRYPTODEV_DIGESTS
--+
--+/* convert digest type to cryptodev */
--+static int
--+digest_nid_to_cryptodev(int nid)
--+{
--+	int i;
--+
--+	for (i = 0; digests[i].id; i++)
--+		if (digests[i].nid == nid)
--+			return (digests[i].id);
--+	return (0);
--+}
--+
--+
--+static int
--+digest_key_length(int nid)
--+{
--+	int i;
--+
--+	for (i = 0; digests[i].id; i++)
--+		if (digests[i].nid == nid)
--+			return digests[i].keylen;
--+	return (0);
--+}
--+
--+
--+static int cryptodev_digest_init(EVP_MD_CTX *ctx)
--+{
--+	struct dev_crypto_state *state = ctx->md_data;
--+	struct session_op *sess = &state->d_sess;
--+	int digest;
--+
--+	if ((digest = digest_nid_to_cryptodev(ctx->digest->type)) == NID_undef){
--+		printf("cryptodev_digest_init: Can't get digest \n");
--+		return (0);
--+	}
--+
--+	memset(state, 0, sizeof(struct dev_crypto_state));
--+
--+	if ((state->d_fd = get_dev_crypto()) < 0) {
--+		printf("cryptodev_digest_init: Can't get Dev \n");
--+		return (0);
--+	}
--+
--+	sess->mackey = state->dummy_mac_key;
--+	sess->mackeylen = digest_key_length(ctx->digest->type);
--+	sess->mac = digest;
--+
--+	if (ioctl(state->d_fd, CIOCGSESSION, sess) < 0) {
--+		close(state->d_fd);
--+		state->d_fd = -1;
--+		printf("cryptodev_digest_init: Open session failed\n");
--+		return (0);
--+	}
--+
--+	return (1);
--+}
--+
--+static int cryptodev_digest_update(EVP_MD_CTX *ctx, const void *data,
--+		size_t count)
--+{
--+	struct crypt_op cryp;
--+	struct dev_crypto_state *state = ctx->md_data;
--+	struct session_op *sess = &state->d_sess;
--+
--+	if (!data || state->d_fd < 0) {
--+		printf("cryptodev_digest_update: illegal inputs \n");
--+		return (0);
--+	}
--+
--+	if (!count) {
--+		return (0);
--+	}
--+
--+	if (!(ctx->flags & EVP_MD_CTX_FLAG_ONESHOT)) {
--+		/* if application doesn't support one buffer */
--+		state->mac_data = OPENSSL_realloc(state->mac_data, state->mac_len + count);
--+
--+		if (!state->mac_data) {
--+			printf("cryptodev_digest_update: realloc failed\n");
--+			return (0);
--+		}
--+
--+		memcpy(state->mac_data + state->mac_len, data, count);
--+   		state->mac_len += count;
--+	
--+		return (1);
--+	}
--+
--+	memset(&cryp, 0, sizeof(cryp));
--+
--+	cryp.ses = sess->ses;
--+	cryp.flags = 0;
--+	cryp.len = count;
--+	cryp.src = (caddr_t) data;
--+	cryp.dst = NULL;
--+	cryp.mac = state->digest_res;
--+	if (ioctl(state->d_fd, CIOCCRYPT, &cryp) < 0) {
--+		printf("cryptodev_digest_update: digest failed\n");
--+		return (0);
--+	}
--+	return (1);
--+}
--+
--+
--+static int cryptodev_digest_final(EVP_MD_CTX *ctx, unsigned char *md)
--+{
--+	struct crypt_op cryp;
--+	struct dev_crypto_state *state = ctx->md_data;
--+	struct session_op *sess = &state->d_sess;
--+
--+	int ret = 1;
--+
--+	if (!md || state->d_fd < 0) {
--+		printf("cryptodev_digest_final: illegal input\n");
--+		return(0);
--+	}
--+
--+	if (! (ctx->flags & EVP_MD_CTX_FLAG_ONESHOT) ) {
--+		/* if application doesn't support one buffer */
--+		memset(&cryp, 0, sizeof(cryp));
--+
--+		cryp.ses = sess->ses;
--+		cryp.flags = 0;
--+		cryp.len = state->mac_len;
--+		cryp.src = state->mac_data;
--+		cryp.dst = NULL;
--+		cryp.mac = md;
--+
--+		if (ioctl(state->d_fd, CIOCCRYPT, &cryp) < 0) {
--+			printf("cryptodev_digest_final: digest failed\n");
--+			return (0);
--+		}
--+
--+		return 1;
--+	}
--+
--+	memcpy(md, state->digest_res, ctx->digest->md_size);
--+
--+	return (ret);
--+}
--+
--+
--+static int cryptodev_digest_cleanup(EVP_MD_CTX *ctx)
--+{
--+	int ret = 1;
--+	struct dev_crypto_state *state = ctx->md_data;
--+	struct session_op *sess = &state->d_sess;
--+
--+	if (state->d_fd < 0) {
--+		printf("cryptodev_digest_cleanup: illegal input\n");
--+		return (0);
--+	}
--+
--+	if (state->mac_data) {
--+		OPENSSL_free(state->mac_data);
--+		state->mac_data = NULL;
--+		state->mac_len = 0;
--+	}
--+
--+	if (state->copy)
--+		return 1;
--+
--+	if (ioctl(state->d_fd, CIOCFSESSION, &sess->ses) < 0) {
--+		printf("cryptodev_digest_cleanup: failed to close session\n");
--+		ret = 0;
--+	} else {
--+		ret = 1;
--+	}
--+	close(state->d_fd);	
--+	state->d_fd = -1;
--+
--+	return (ret);
--+}
--+
--+static int cryptodev_digest_copy(EVP_MD_CTX *to,const EVP_MD_CTX *from)
--+{
--+	struct dev_crypto_state *fstate = from->md_data;
--+	struct dev_crypto_state *dstate = to->md_data;
--+
--+	memcpy(dstate, fstate, sizeof(struct dev_crypto_state));
--+
--+	if (fstate->mac_len != 0) {
--+		dstate->mac_data = OPENSSL_malloc(fstate->mac_len);
--+		memcpy(dstate->mac_data, fstate->mac_data, fstate->mac_len);
--+	}
--+
--+	dstate->copy = 1;
--+
--+	return 1;
--+}
--+
--+
--+const EVP_MD cryptodev_sha1 = {
--+	NID_sha1,
--+	NID_undef, 
--+	SHA_DIGEST_LENGTH, 
--+	EVP_MD_FLAG_ONESHOT,
--+	cryptodev_digest_init,
--+	cryptodev_digest_update,
--+	cryptodev_digest_final,
--+	cryptodev_digest_copy,
--+	cryptodev_digest_cleanup,
--+	EVP_PKEY_NULL_method,
--+	SHA_CBLOCK,
--+	sizeof(struct dev_crypto_state),
--+};
--+
--+const EVP_MD cryptodev_md5 = {
--+	NID_md5,
--+	NID_undef, 
--+	16 /* MD5_DIGEST_LENGTH */, 
--+	EVP_MD_FLAG_ONESHOT,
--+	cryptodev_digest_init,
--+	cryptodev_digest_update,
--+	cryptodev_digest_final,
--+	cryptodev_digest_copy,
--+	cryptodev_digest_cleanup,
--+	EVP_PKEY_NULL_method,
--+	64 /* MD5_CBLOCK */,
--+	sizeof(struct dev_crypto_state),
--+};
--+
--+#endif /* USE_CRYPTODEV_DIGESTS */
--+
--+
-- static int
-- cryptodev_engine_digests(ENGINE *e, const EVP_MD **digest,
--     const int **nids, int nid)
--@@ -606,10 +883,15 @@
-- 		return (cryptodev_usable_digests(nids));
-- 
-- 	switch (nid) {
--+#ifdef USE_CRYPTODEV_DIGESTS
-- 	case NID_md5:
---		*digest = NULL; /* need to make a clean md5 critter */
--+		*digest = &cryptodev_md5; 
-- 		break;
--+	case NID_sha1:
--+		*digest = &cryptodev_sha1;
--+ 		break;
-- 	default:
--+#endif /* USE_CRYPTODEV_DIGESTS */
-- 		*digest = NULL;
-- 		break;
-- 	}
--@@ -625,7 +907,7 @@
-- bn2crparam(const BIGNUM *a, struct crparam *crp)
-- {
-- 	int i, j, k;
---	ssize_t words, bytes, bits;
--+	ssize_t bytes, bits;
-- 	u_char *b;
-- 
-- 	crp->crp_p = NULL;
--@@ -637,6 +919,7 @@
-- 	b = malloc(bytes);
-- 	if (b == NULL)
-- 		return (1);
--+	memset(b, 0, bytes);
-- 
-- 	crp->crp_p = b;
-- 	crp->crp_nbits = bits;
--@@ -681,7 +964,7 @@
-- {
-- 	int i;
-- 
---	for (i = 0; i <= kop->crk_iparams + kop->crk_oparams; i++) {
--+	for (i = 0; i < kop->crk_iparams + kop->crk_oparams; i++) {
-- 		if (kop->crk_param[i].crp_p)
-- 			free(kop->crk_param[i].crp_p);
-- 		kop->crk_param[i].crp_p = NULL;
--@@ -756,12 +1039,10 @@
-- }
-- 
-- static int
---cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
--+cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx)
-- {
-- 	int r;
---	BN_CTX *ctx;
---
---	ctx = BN_CTX_new();
--+	ctx = BN_CTX_new(); /* not sure why we reallocate this. DM */
-- 	r = cryptodev_bn_mod_exp(r0, I, rsa->d, rsa->n, ctx, NULL);
-- 	BN_CTX_free(ctx);
-- 	return (r);
--diff -Nur openssl-0.9.8h/crypto/engine/eng_table.c openssl-0.9.8h-ocf/crypto/engine/eng_table.c
----- openssl-0.9.8h/crypto/engine/eng_table.c	2008-04-28 23:45:43.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/engine/eng_table.c	2008-07-12 04:18:53.000000000 +0200
--@@ -186,6 +186,8 @@
-- 		{
-- 		engine_unlocked_finish(e, 0);
-- 		pile->funct = NULL;
--+		/* "touch" this ENGINE_CIPHER */
--+		pile->uptodate = 0;
-- 		}
-- 	}
-- static IMPLEMENT_LHASH_DOALL_ARG_FN(int_unregister_cb,ENGINE_PILE *,ENGINE *)
--diff -Nur openssl-0.9.8h/crypto/engine/engine.h openssl-0.9.8h-ocf/crypto/engine/engine.h
----- openssl-0.9.8h/crypto/engine/engine.h	2005-11-06 18:48:59.000000000 +0100
--+++ openssl-0.9.8h-ocf/crypto/engine/engine.h	2008-07-12 04:18:53.000000000 +0200
--@@ -688,7 +688,7 @@
--  * values. */
-- void *ENGINE_get_static_state(void);
-- 
---#if defined(__OpenBSD__) || defined(__FreeBSD__)
--+#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
-- void ENGINE_setup_bsd_cryptodev(void);
-- #endif
-- 
--diff -Nur openssl-0.9.8h/crypto/evp/c_all.c openssl-0.9.8h-ocf/crypto/evp/c_all.c
----- openssl-0.9.8h/crypto/evp/c_all.c	2004-08-29 18:36:04.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/evp/c_all.c	2008-07-12 04:18:53.000000000 +0200
--@@ -83,7 +83,7 @@
-- 	OpenSSL_add_all_ciphers();
-- 	OpenSSL_add_all_digests();
-- #ifndef OPENSSL_NO_ENGINE
---# if defined(__OpenBSD__) || defined(__FreeBSD__)
--+# if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
-- 	ENGINE_setup_bsd_cryptodev();
-- # endif
-- #endif
--diff -Nur openssl-0.9.8h/crypto/evp/c_alld.c openssl-0.9.8h-ocf/crypto/evp/c_alld.c
----- openssl-0.9.8h/crypto/evp/c_alld.c	2005-04-30 23:51:40.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/evp/c_alld.c	2008-07-12 04:18:53.000000000 +0200
--@@ -81,7 +81,7 @@
-- 	EVP_add_digest(EVP_dss());
-- #endif
-- #endif
---#ifndef OPENSSL_NO_SHA
--+#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA1)
-- 	EVP_add_digest(EVP_sha1());
-- 	EVP_add_digest_alias(SN_sha1,"ssl3-sha1");
-- 	EVP_add_digest_alias(SN_sha1WithRSAEncryption,SN_sha1WithRSA);
--diff -Nur openssl-0.9.8h/engines/Makefile openssl-0.9.8h-ocf/engines/Makefile
----- openssl-0.9.8h/engines/Makefile	2006-02-04 02:49:34.000000000 +0100
--+++ openssl-0.9.8h-ocf/engines/Makefile	2008-07-12 04:18:53.000000000 +0200
--@@ -93,6 +93,7 @@
-- 			( echo installing $$l; \
-- 			  if [ "$(PLATFORM)" != "Cygwin" ]; then \
-- 				case "$(CFLAGS)" in \
--+				*OPENSSL_NO_HW*)	continue;;	\
-- 				*DSO_DLFCN*)	sfx="so";;	\
-- 				*DSO_DL*)	sfx="sl";;	\
-- 				*)		sfx="bad";;	\
--diff -Nur openssl-0.9.8h/util/domd openssl-0.9.8h-ocf/util/domd
----- openssl-0.9.8h/util/domd	2005-03-30 16:44:50.000000000 +0200
--+++ openssl-0.9.8h-ocf/util/domd	2008-07-12 04:18:53.000000000 +0200
--@@ -23,13 +23,17 @@
--     done
--     sed -e '/^# DO NOT DELETE.*/,$d' < Makefile > Makefile.tmp
--     echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' >> Makefile.tmp
---    ${MAKEDEPEND} -D OPENSSL_DOING_MAKEDEPEND -M $args >> Makefile.tmp
--+    ${MAKEDEPEND} -D OPENSSL_DOING_MAKEDEPEND -M $args >> Makefile.tmp &&
--     ${PERL} $TOP/util/clean-depend.pl < Makefile.tmp > Makefile.new
--+	RC=$?
--     rm -f Makefile.tmp
-- else
---    ${MAKEDEPEND} -D OPENSSL_DOING_MAKEDEPEND $@
--+    ${MAKEDEPEND} -D OPENSSL_DOING_MAKEDEPEND $@ && \
--     ${PERL} $TOP/util/clean-depend.pl < Makefile > Makefile.new
--+	RC=$?
-- fi
-- mv Makefile.new Makefile
-- # unfake the presence of Kerberos
-- rm $TOP/krb5.h
--+
--+exit $RC
-diff -Naur kamikaze-orig/package/openssl/patches/205-use_local_cryptodev_h.patch kamikaze-mod/package/openssl/patches/205-use_local_cryptodev_h.patch
---- kamikaze-orig/package/openssl/patches/205-use_local_cryptodev_h.patch	2008-07-13 15:18:26.209241000 +0000
-+++ kamikaze-mod/package/openssl/patches/205-use_local_cryptodev_h.patch	1970-01-01 00:00:00.000000000 +0000
-@@ -1,494 +0,0 @@
--diff -Nur openssl-0.9.8h/crypto/engine/cryptodev.h openssl-0.9.8h-ocf/crypto/engine/cryptodev.h
----- openssl-0.9.8h/crypto/engine/cryptodev.h	1970-01-01 01:00:00.000000000 +0100
--+++ openssl-0.9.8h-ocf/crypto/engine/cryptodev.h	2008-07-13 15:32:53.000000000 +0200
--@@ -0,0 +1,478 @@
--+/*	$FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $	*/
--+/*	$OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $	*/
--+
--+/*-
--+ * Linux port done by David McCullough <david_mccullough at securecomputing.com>
--+ * Copyright (C) 2006-2007 David McCullough
--+ * Copyright (C) 2004-2005 Intel Corporation.
--+ * The license and original author are listed below.
--+ *
--+ * The author of this code is Angelos D. Keromytis (angelos at cis.upenn.edu)
--+ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
--+ *
--+ * This code was written by Angelos D. Keromytis in Athens, Greece, in
--+ * February 2000. Network Security Technologies Inc. (NSTI) kindly
--+ * supported the development of this code.
--+ *
--+ * Copyright (c) 2000 Angelos D. Keromytis
--+ *
--+ * Permission to use, copy, and modify this software with or without fee
--+ * is hereby granted, provided that this entire notice is included in
--+ * all source code copies of any software which is or includes a copy or
--+ * modification of this software.
--+ *
--+ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
--+ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
--+ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
--+ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
--+ * PURPOSE.
--+ *
--+ * Copyright (c) 2001 Theo de Raadt
--+ *
--+ * Redistribution and use in source and binary forms, with or without
--+ * modification, are permitted provided that the following conditions
--+ * are met:
--+ *
--+ * 1. Redistributions of source code must retain the above copyright
--+ *   notice, this list of conditions and the following disclaimer.
--+ * 2. Redistributions in binary form must reproduce the above copyright
--+ *   notice, this list of conditions and the following disclaimer in the
--+ *   documentation and/or other materials provided with the distribution.
--+ * 3. The name of the author may not be used to endorse or promote products
--+ *   derived from this software without specific prior written permission.
--+ *
--+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
--+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
--+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
--+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
--+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
--+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
--+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
--+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
--+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
--+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--+ *
--+ * Effort sponsored in part by the Defense Advanced Research Projects
--+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
--+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
--+ *
--+ */
--+
--+#ifndef _CRYPTO_CRYPTO_H_
--+#define _CRYPTO_CRYPTO_H_
--+
--+/* Some initial values */
--+#define CRYPTO_DRIVERS_INITIAL	4
--+#define CRYPTO_SW_SESSIONS	32
--+
--+/* Hash values */
--+#define NULL_HASH_LEN		0
--+#define MD5_HASH_LEN		16
--+#define SHA1_HASH_LEN		20
--+#define RIPEMD160_HASH_LEN	20
--+#define SHA2_256_HASH_LEN	32
--+#define SHA2_384_HASH_LEN	48
--+#define SHA2_512_HASH_LEN	64
--+#define MD5_KPDK_HASH_LEN	16
--+#define SHA1_KPDK_HASH_LEN	20
--+/* Maximum hash algorithm result length */
--+#define HASH_MAX_LEN		SHA2_512_HASH_LEN /* Keep this updated */
--+
--+/* HMAC values */
--+#define NULL_HMAC_BLOCK_LEN			1
--+#define MD5_HMAC_BLOCK_LEN			64
--+#define SHA1_HMAC_BLOCK_LEN			64
--+#define RIPEMD160_HMAC_BLOCK_LEN	64
--+#define SHA2_256_HMAC_BLOCK_LEN		64
--+#define SHA2_384_HMAC_BLOCK_LEN		128
--+#define SHA2_512_HMAC_BLOCK_LEN		128
--+/* Maximum HMAC block length */
--+#define HMAC_MAX_BLOCK_LEN		SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */
--+#define HMAC_IPAD_VAL			0x36
--+#define HMAC_OPAD_VAL			0x5C
--+
--+/* Encryption algorithm block sizes */
--+#define NULL_BLOCK_LEN			1
--+#define DES_BLOCK_LEN			8
--+#define DES3_BLOCK_LEN			8
--+#define BLOWFISH_BLOCK_LEN		8
--+#define SKIPJACK_BLOCK_LEN		8
--+#define CAST128_BLOCK_LEN		8
--+#define RIJNDAEL128_BLOCK_LEN	16
--+#define AES_BLOCK_LEN			RIJNDAEL128_BLOCK_LEN
--+#define CAMELLIA_BLOCK_LEN		16
--+#define ARC4_BLOCK_LEN			1
--+#define EALG_MAX_BLOCK_LEN		AES_BLOCK_LEN /* Keep this updated */
--+
--+/* Encryption algorithm min and max key sizes */
--+#define NULL_MIN_KEY_LEN		0
--+#define NULL_MAX_KEY_LEN		0
--+#define DES_MIN_KEY_LEN			8
--+#define DES_MAX_KEY_LEN			8
--+#define DES3_MIN_KEY_LEN		24
--+#define DES3_MAX_KEY_LEN		24
--+#define BLOWFISH_MIN_KEY_LEN	4
--+#define BLOWFISH_MAX_KEY_LEN	56
--+#define SKIPJACK_MIN_KEY_LEN	10
--+#define SKIPJACK_MAX_KEY_LEN	10
--+#define CAST128_MIN_KEY_LEN		5
--+#define CAST128_MAX_KEY_LEN		16
--+#define RIJNDAEL128_MIN_KEY_LEN	16
--+#define RIJNDAEL128_MAX_KEY_LEN	32
--+#define AES_MIN_KEY_LEN			RIJNDAEL128_MIN_KEY_LEN
--+#define AES_MAX_KEY_LEN			RIJNDAEL128_MAX_KEY_LEN
--+#define CAMELLIA_MIN_KEY_LEN	16
--+#define CAMELLIA_MAX_KEY_LEN	32
--+#define ARC4_MIN_KEY_LEN		1
--+#define ARC4_MAX_KEY_LEN		256
--+
--+/* Max size of data that can be processed */
--+#define CRYPTO_MAX_DATA_LEN		64*1024 - 1
--+
--+#define CRYPTO_ALGORITHM_MIN	1
--+#define CRYPTO_DES_CBC			1
--+#define CRYPTO_3DES_CBC			2
--+#define CRYPTO_BLF_CBC			3
--+#define CRYPTO_CAST_CBC			4
--+#define CRYPTO_SKIPJACK_CBC		5
--+#define CRYPTO_MD5_HMAC			6
--+#define CRYPTO_SHA1_HMAC		7
--+#define CRYPTO_RIPEMD160_HMAC	8
--+#define CRYPTO_MD5_KPDK			9
--+#define CRYPTO_SHA1_KPDK		10
--+#define CRYPTO_RIJNDAEL128_CBC	11 /* 128 bit blocksize */
--+#define CRYPTO_AES_CBC			11 /* 128 bit blocksize -- the same as above */
--+#define CRYPTO_ARC4				12
--+#define CRYPTO_MD5				13
--+#define CRYPTO_SHA1				14
--+#define CRYPTO_NULL_HMAC		15
--+#define CRYPTO_NULL_CBC			16
--+#define CRYPTO_DEFLATE_COMP		17 /* Deflate compression algorithm */
--+#define CRYPTO_SHA2_256_HMAC	18
--+#define CRYPTO_SHA2_384_HMAC	19
--+#define CRYPTO_SHA2_512_HMAC	20
--+#define CRYPTO_CAMELLIA_CBC		21
--+#define CRYPTO_SHA2_256			22
--+#define CRYPTO_SHA2_384			23
--+#define CRYPTO_SHA2_512			24
--+#define CRYPTO_RIPEMD160		25
--+#define CRYPTO_ALGORITHM_MAX	25 /* Keep updated - see below */
--+
--+/* Algorithm flags */
--+#define CRYPTO_ALG_FLAG_SUPPORTED	0x01 /* Algorithm is supported */
--+#define CRYPTO_ALG_FLAG_RNG_ENABLE	0x02 /* Has HW RNG for DH/DSA */
--+#define CRYPTO_ALG_FLAG_DSA_SHA		0x04 /* Can do SHA on msg */
--+
--+/*
--+ * Crypto driver/device flags.  They can set in the crid
--+ * parameter when creating a session or submitting a key
--+ * op to affect the device/driver assigned.  If neither
--+ * of these are specified then the crid is assumed to hold
--+ * the driver id of an existing (and suitable) device that
--+ * must be used to satisfy the request.
--+ */
--+#define CRYPTO_FLAG_HARDWARE	0x01000000	/* hardware accelerated */
--+#define CRYPTO_FLAG_SOFTWARE	0x02000000	/* software implementation */
--+
--+/* NB: deprecated */
--+struct session_op {
--+	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
--+	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
--+
--+	u_int32_t	keylen;		/* cipher key */
--+	caddr_t		key;
--+	int		mackeylen;	/* mac key */
--+	caddr_t		mackey;
--+
--+  	u_int32_t	ses;		/* returns: session # */ 
--+};
--+
--+struct session2_op {
--+	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
--+	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
--+
--+	u_int32_t	keylen;		/* cipher key */
--+	caddr_t		key;
--+	int		mackeylen;	/* mac key */
--+	caddr_t		mackey;
--+
--+  	u_int32_t	ses;		/* returns: session # */ 
--+	int		crid;		/* driver id + flags (rw) */
--+	int		pad[4];		/* for future expansion */
--+};
--+
--+struct crypt_op {
--+	u_int32_t	ses;
--+	u_int16_t	op;		/* i.e. COP_ENCRYPT */
--+#define COP_NONE	0
--+#define COP_ENCRYPT	1
--+#define COP_DECRYPT	2
--+	u_int16_t	flags;
--+#define	COP_F_BATCH	0x0008		/* Batch op if possible */
--+	u_int		len;
--+	caddr_t		src, dst;	/* become iov[] inside kernel */
--+	caddr_t		mac;		/* must be big enough for chosen MAC */
--+	caddr_t		iv;
--+};
--+
--+/*
--+ * Parameters for looking up a crypto driver/device by
--+ * device name or by id.  The latter are returned for
--+ * created sessions (crid) and completed key operations.
--+ */
--+struct crypt_find_op {
--+	int		crid;		/* driver id + flags */
--+	char		name[32];	/* device/driver name */
--+};
--+
--+/* bignum parameter, in packed bytes, ... */
--+struct crparam {
--+	caddr_t		crp_p;
--+	u_int		crp_nbits;
--+};
--+
--+#define CRK_MAXPARAM	8
--+
--+struct crypt_kop {
--+	u_int		crk_op;		/* ie. CRK_MOD_EXP or other */
--+	u_int		crk_status;	/* return status */
--+	u_short		crk_iparams;	/* # of input parameters */
--+	u_short		crk_oparams;	/* # of output parameters */
--+	u_int		crk_crid;	/* NB: only used by CIOCKEY2 (rw) */
--+	struct crparam	crk_param[CRK_MAXPARAM];
--+};
--+#define CRK_ALGORITM_MIN	0
--+#define CRK_MOD_EXP		0
--+#define CRK_MOD_EXP_CRT		1
--+#define CRK_DSA_SIGN		2
--+#define CRK_DSA_VERIFY		3
--+#define CRK_DH_COMPUTE_KEY	4
--+#define CRK_ALGORITHM_MAX	4 /* Keep updated - see below */
--+
--+#define CRF_MOD_EXP		(1 << CRK_MOD_EXP)
--+#define CRF_MOD_EXP_CRT		(1 << CRK_MOD_EXP_CRT)
--+#define CRF_DSA_SIGN		(1 << CRK_DSA_SIGN)
--+#define CRF_DSA_VERIFY		(1 << CRK_DSA_VERIFY)
--+#define CRF_DH_COMPUTE_KEY	(1 << CRK_DH_COMPUTE_KEY)
--+
--+/*
--+ * done against open of /dev/crypto, to get a cloned descriptor.
--+ * Please use F_SETFD against the cloned descriptor.
--+ */
--+#define CRIOGET		_IOWR('c', 100, u_int32_t)
--+#define CRIOASYMFEAT	CIOCASYMFEAT
--+#define CRIOFINDDEV	CIOCFINDDEV
--+
--+/* the following are done against the cloned descriptor */
--+#define CIOCGSESSION	_IOWR('c', 101, struct session_op)
--+#define CIOCFSESSION	_IOW('c', 102, u_int32_t)
--+#define CIOCCRYPT	_IOWR('c', 103, struct crypt_op)
--+#define CIOCKEY		_IOWR('c', 104, struct crypt_kop)
--+#define CIOCASYMFEAT	_IOR('c', 105, u_int32_t)
--+#define CIOCGSESSION2	_IOWR('c', 106, struct session2_op)
--+#define CIOCKEY2	_IOWR('c', 107, struct crypt_kop)
--+#define CIOCFINDDEV	_IOWR('c', 108, struct crypt_find_op)
--+
--+struct cryptotstat {
--+	struct timespec	acc;		/* total accumulated time */
--+	struct timespec	min;		/* min time */
--+	struct timespec	max;		/* max time */
--+	u_int32_t	count;		/* number of observations */
--+};
--+
--+struct cryptostats {
--+	u_int32_t	cs_ops;		/* symmetric crypto ops submitted */
--+	u_int32_t	cs_errs;	/* symmetric crypto ops that failed */
--+	u_int32_t	cs_kops;	/* asymetric/key ops submitted */
--+	u_int32_t	cs_kerrs;	/* asymetric/key ops that failed */
--+	u_int32_t	cs_intrs;	/* crypto swi thread activations */
--+	u_int32_t	cs_rets;	/* crypto return thread activations */
--+	u_int32_t	cs_blocks;	/* symmetric op driver block */
--+	u_int32_t	cs_kblocks;	/* symmetric op driver block */
--+	/*
--+	 * When CRYPTO_TIMING is defined at compile time and the
--+	 * sysctl debug.crypto is set to 1, the crypto system will
--+	 * accumulate statistics about how long it takes to process
--+	 * crypto requests at various points during processing.
--+	 */
--+	struct cryptotstat cs_invoke;	/* crypto_dipsatch -> crypto_invoke */
--+	struct cryptotstat cs_done;	/* crypto_invoke -> crypto_done */
--+	struct cryptotstat cs_cb;	/* crypto_done -> callback */
--+	struct cryptotstat cs_finis;	/* callback -> callback return */
--+
--+	u_int32_t	cs_drops;		/* crypto ops dropped due to congestion */
--+};
--+
--+#ifdef __KERNEL__
--+
--+/* Standard initialization structure beginning */
--+struct cryptoini {
--+	int		cri_alg;	/* Algorithm to use */
--+	int		cri_klen;	/* Key length, in bits */
--+	int		cri_mlen;	/* Number of bytes we want from the
--+					   entire hash. 0 means all. */
--+	caddr_t		cri_key;	/* key to use */
--+	u_int8_t	cri_iv[EALG_MAX_BLOCK_LEN];	/* IV to use */
--+	struct cryptoini *cri_next;
--+};
--+
--+/* Describe boundaries of a single crypto operation */
--+struct cryptodesc {
--+	int		crd_skip;	/* How many bytes to ignore from start */
--+	int		crd_len;	/* How many bytes to process */
--+	int		crd_inject;	/* Where to inject results, if applicable */
--+	int		crd_flags;
--+
--+#define CRD_F_ENCRYPT		0x01	/* Set when doing encryption */
--+#define CRD_F_IV_PRESENT	0x02	/* When encrypting, IV is already in
--+					   place, so don't copy. */
--+#define CRD_F_IV_EXPLICIT	0x04	/* IV explicitly provided */
--+#define CRD_F_DSA_SHA_NEEDED	0x08	/* Compute SHA-1 of buffer for DSA */
--+#define CRD_F_KEY_EXPLICIT	0x10	/* Key explicitly provided */
--+#define CRD_F_COMP		0x0f    /* Set when doing compression */
--+
--+	struct cryptoini	CRD_INI; /* Initialization/context data */
--+#define crd_iv		CRD_INI.cri_iv
--+#define crd_key		CRD_INI.cri_key
--+#define crd_alg		CRD_INI.cri_alg
--+#define crd_klen	CRD_INI.cri_klen
--+
--+	struct cryptodesc *crd_next;
--+};
--+
--+/* Structure describing complete operation */
--+struct cryptop {
--+	struct list_head crp_next;
--+	wait_queue_head_t crp_waitq;
--+
--+	u_int64_t	crp_sid;	/* Session ID */
--+	int		crp_ilen;	/* Input data total length */
--+	int		crp_olen;	/* Result total length */
--+
--+	int		crp_etype;	/*
--+					 * Error type (zero means no error).
--+					 * All error codes except EAGAIN
--+					 * indicate possible data corruption (as in,
--+					 * the data have been touched). On all
--+					 * errors, the crp_sid may have changed
--+					 * (reset to a new one), so the caller
--+					 * should always check and use the new
--+					 * value on future requests.
--+					 */
--+	int		crp_flags;
--+
--+#define CRYPTO_F_SKBUF		0x0001	/* Input/output are skbuf chains */
--+#define CRYPTO_F_IOV		0x0002	/* Input/output are uio */
--+#define CRYPTO_F_REL		0x0004	/* Must return data in same place */
--+#define CRYPTO_F_BATCH		0x0008	/* Batch op if possible */
--+#define CRYPTO_F_CBIMM		0x0010	/* Do callback immediately */
--+#define CRYPTO_F_DONE		0x0020	/* Operation completed */
--+#define CRYPTO_F_CBIFSYNC	0x0040	/* Do CBIMM if op is synchronous */
--+
--+	caddr_t		crp_buf;	/* Data to be processed */
--+	caddr_t		crp_opaque;	/* Opaque pointer, passed along */
--+	struct cryptodesc *crp_desc;	/* Linked list of processing descriptors */
--+
--+	int (*crp_callback)(struct cryptop *); /* Callback function */
--+};
--+
--+#define CRYPTO_BUF_CONTIG	0x0
--+#define CRYPTO_BUF_IOV		0x1
--+#define CRYPTO_BUF_SKBUF		0x2
--+
--+#define CRYPTO_OP_DECRYPT	0x0
--+#define CRYPTO_OP_ENCRYPT	0x1
--+
--+/*
--+ * Hints passed to process methods.
--+ */
--+#define CRYPTO_HINT_MORE	0x1	/* more ops coming shortly */
--+
--+struct cryptkop {
--+	struct list_head krp_next;
--+	wait_queue_head_t krp_waitq;
--+
--+	int		krp_flags;
--+#define CRYPTO_KF_DONE		0x0001	/* Operation completed */
--+#define CRYPTO_KF_CBIMM		0x0002	/* Do callback immediately */
--+
--+	u_int		krp_op;		/* ie. CRK_MOD_EXP or other */
--+	u_int		krp_status;	/* return status */
--+	u_short		krp_iparams;	/* # of input parameters */
--+	u_short		krp_oparams;	/* # of output parameters */
--+	u_int		krp_crid;	/* desired device, etc. */
--+	u_int32_t	krp_hid;
--+	struct crparam	krp_param[CRK_MAXPARAM];	/* kvm */
--+	int		(*krp_callback)(struct cryptkop *);
--+};
--+
--+#include <ocf-compat.h>
--+
--+/*
--+ * Session ids are 64 bits.  The lower 32 bits contain a "local id" which
--+ * is a driver-private session identifier.  The upper 32 bits contain a
--+ * "hardware id" used by the core crypto code to identify the driver and
--+ * a copy of the driver's capabilities that can be used by client code to
--+ * optimize operation.
--+ */
--+#define CRYPTO_SESID2HID(_sid)	(((_sid) >> 32) & 0x00ffffff)
--+#define CRYPTO_SESID2CAPS(_sid)	(((_sid) >> 32) & 0xff000000)
--+#define CRYPTO_SESID2LID(_sid)	(((u_int32_t) (_sid)) & 0xffffffff)
--+
--+extern	int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard);
--+extern	int crypto_freesession(u_int64_t sid);
--+#define CRYPTOCAP_F_HARDWARE	CRYPTO_FLAG_HARDWARE
--+#define CRYPTOCAP_F_SOFTWARE	CRYPTO_FLAG_SOFTWARE
--+#define CRYPTOCAP_F_SYNC	0x04000000	/* operates synchronously */
--+extern	int32_t crypto_get_driverid(device_t dev, int flags);
--+extern	int crypto_find_driver(const char *);
--+extern	device_t crypto_find_device_byhid(int hid);
--+extern	int crypto_getcaps(int hid);
--+extern	int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
--+	    u_int32_t flags);
--+extern	int crypto_kregister(u_int32_t, int, u_int32_t);
--+extern	int crypto_unregister(u_int32_t driverid, int alg);
--+extern	int crypto_unregister_all(u_int32_t driverid);
--+extern	int crypto_dispatch(struct cryptop *crp);
--+extern	int crypto_kdispatch(struct cryptkop *);
--+#define CRYPTO_SYMQ	0x1
--+#define CRYPTO_ASYMQ	0x2
--+extern	int crypto_unblock(u_int32_t, int);
--+extern	void crypto_done(struct cryptop *crp);
--+extern	void crypto_kdone(struct cryptkop *);
--+extern	int crypto_getfeat(int *);
--+
--+extern	void crypto_freereq(struct cryptop *crp);
--+extern	struct cryptop *crypto_getreq(int num);
--+
--+extern  int crypto_usercrypto;      /* userland may do crypto requests */
--+extern  int crypto_userasymcrypto;  /* userland may do asym crypto reqs */
--+extern  int crypto_devallowsoft;    /* only use hardware crypto */
--+
--+/*
--+ * random number support,  crypto_unregister_all will unregister
--+ */
--+extern int crypto_rregister(u_int32_t driverid,
--+		int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg);
--+extern int crypto_runregister_all(u_int32_t driverid);
--+
--+/*
--+ * Crypto-related utility routines used mainly by drivers.
--+ *
--+ * XXX these don't really belong here; but for now they're
--+ *     kept apart from the rest of the system.
--+ */
--+struct uio;
--+extern	void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp);
--+extern	void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp);
--+extern	struct iovec *cuio_getptr(struct uio *uio, int loc, int *off);
--+
--+extern	void crypto_copyback(int flags, caddr_t buf, int off, int size,
--+	    caddr_t in);
--+extern	void crypto_copydata(int flags, caddr_t buf, int off, int size,
--+	    caddr_t out);
--+extern	int crypto_apply(int flags, caddr_t buf, int off, int len,
--+	    int (*f)(void *, void *, u_int), void *arg);
--+
--+#endif /* __KERNEL__ */
--+#endif /* _CRYPTO_CRYPTO_H_ */
--diff -Nur openssl-0.9.8h/crypto/engine/eng_cryptodev.c openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c
----- openssl-0.9.8h/crypto/engine/eng_cryptodev.c	2008-07-13 15:32:53.000000000 +0200
--+++ openssl-0.9.8h-ocf/crypto/engine/eng_cryptodev.c	2008-07-13 15:34:19.000000000 +0200
--@@ -54,7 +54,7 @@
-- #else 
--  
-- #include <sys/types.h>
---#include <crypto/cryptodev.h>
--+#include "cryptodev.h"
-- #include <sys/ioctl.h>
-- #include <errno.h>
-- #include <stdio.h>
-diff -Naur kamikaze-orig/package/openssl/patches/210-use_cryptodev_by_default_if_available.patch kamikaze-mod/package/openssl/patches/210-use_cryptodev_by_default_if_available.patch
---- kamikaze-orig/package/openssl/patches/210-use_cryptodev_by_default_if_available.patch	2008-07-12 15:43:16.473511000 +0000
-+++ kamikaze-mod/package/openssl/patches/210-use_cryptodev_by_default_if_available.patch	1970-01-01 00:00:00.000000000 +0000
-@@ -1,28 +0,0 @@
----- openssl-0.9.8h/ssl/ssl_algs.c	2007-04-24 01:50:21.000000000 +0200
--+++ openssl-0.9.8h-ocf/ssl/ssl_algs.c	2008-07-12 17:34:27.000000000 +0200
--@@ -57,6 +57,9 @@
--  */
-- 
-- #include <stdio.h>
--+#ifndef OPENSSL_NO_ENGINE
--+#include <openssl/engine.h>
--+#endif
-- #include <openssl/objects.h>
-- #include <openssl/lhash.h>
-- #include "ssl_locl.h"
--@@ -127,6 +130,15 @@
-- #endif
-- 	/* initialize cipher/digest methods table */
-- 	ssl_load_ciphers();
--+
--+#ifndef OPENSSL_NO_ENGINE
--+	/* Initialize available hardware crypto engines */
--+	ENGINE_load_builtin_engines();
--+	ENGINE_register_all_complete();
--+	/* ...and set cryptodev to be the default. */
--+	ENGINE_set_default_ciphers(ENGINE_by_id("cryptodev"));
--+#endif
--+
-- 	return(1);
-- 	}
-- 



More information about the tor-commits mailing list