[or-cvs] formatting/numbering patch from matt edman
arma at seul.org
arma at seul.org
Mon Aug 29 04:49:46 UTC 2005
Update of /home2/or/cvsroot/tor/doc
In directory moria:/home/arma/work/onion/cvs/tor/doc
Modified Files:
control-spec.txt
Log Message:
formatting/numbering patch from matt edman
Index: control-spec.txt
===================================================================
RCS file: /home2/or/cvsroot/tor/doc/control-spec.txt,v
retrieving revision 1.51
retrieving revision 1.52
diff -u -d -r1.51 -r1.52
--- control-spec.txt 22 Aug 2005 20:05:41 -0000 1.51
+++ control-spec.txt 29 Aug 2005 04:49:44 -0000 1.52
@@ -2,7 +2,7 @@
TC: A Tor control protocol (Version 1)
-0 Scope
+0. Scope
This document describes an implementation-specific protocol that is used
for other programs (such as frontend user-interfaces) to communicate with a
@@ -14,7 +14,7 @@
recommended to avoid using TC directly, but instead to use a library that
can easily be updated to use the newer protocol.
-1 Protocol outline
+1. Protocol outline
TC is a bidirectional message-based protocol. It assumes an underlying
stream for communication between a controlling process (the "client"
@@ -34,9 +34,9 @@
Servers respond to messages in the order messages are received.
-2 Message format
+2. Message format
-2.1 Description format
+2.1. Description format
The message formats listed below use ABNF as described in RFC2234.
The protocol itself is loosely based on SMTP (see RFC 2821).
@@ -50,7 +50,7 @@
There are explicitly no limits on line length. All 8-bit characters are
permitted unless explicitly disallowed.
-2.2 Commands from controller to Tor
+2.2. Commands from controller to Tor
Command = Keyword Arguments CRLF / "+" Keyword Arguments CRLF Data
Keyword = 1*ALPHA
@@ -58,7 +58,7 @@
Specific commands and their arguments are described below in section 3.
-2.3 Replies from Tor to the controller
+2.3. Replies from Tor to the controller
Reply = *(MidReplyLine / DataReplyLine) EndReplyLine
@@ -72,7 +72,7 @@
Specific replies are mentioned below in section 3, and described more fully
in section 4.
-2.4 General-use tokens
+2.4. General-use tokens
; Identifiers for servers.
ServerID = Nickname / Fingerprint
@@ -98,11 +98,11 @@
LineItem = NonCR / 1*CR NonCRLF
NonDotItem = NonDotCR / 1*CR NonCRLF
-3 Commands
+3. Commands
All commands and other keywords are case-insensitive.
-3.1 SETCONF
+3.1. SETCONF
Change the value of one or more configuration variables. The syntax is:
@@ -129,7 +129,7 @@
To _remove_ all settings for a given option entirely (and go back to its
default value), send a single line containing the key and no value.
-3.2 GETCONF
+3.2. GETCONF
Request the value of a configuration variable. The syntax is:
@@ -154,7 +154,7 @@
virtual keyword to get all HiddenServiceDir, HiddenServicePort,
HiddenServiceNodes, and HiddenServiceExcludeNodes option settings.
-3.3 SETEVENTS
+3.3. SETEVENTS
Request the server to inform the client about interesting events. The
syntax is:
@@ -171,7 +171,7 @@
Unrecognized event" reply if one of the event codes isn't recognized. (On
error, the list of active event codes isn't changed.)
-3.4 AUTHENTICATE
+3.4. AUTHENTICATE
Sent from the client to the server. The syntax is:
"AUTHENTICATE" [ SP 1*HEXDIG / QuotedString ] CRLF
@@ -186,7 +186,7 @@
AUTHENTICATE message, Tor sends a "514 authentication required" reply to
any other kind of message.
-3.5 SAVECONF
+3.5. SAVECONF
Sent from the client to the server. The syntax is:
"SAVECONF" CRLF
@@ -195,7 +195,7 @@
returns "250 OK" if successful, or "551 Unable to write configuration
to disk" if it can't write the file or some other error occurs.
-3.6 SIGNAL
+3.6. SIGNAL
Sent from the client to the server. The syntax is:
@@ -219,7 +219,7 @@
closes the socket if it was asked to close immediately), or "552
Unrecognized signal" if the signal is unrecognized.
-3.7 MAPADDRESS
+3.7. MAPADDRESS
Sent from the client to the server. The syntax is:
@@ -273,7 +273,7 @@
a certain time, then it must explicitly un-map the address when that
time has elapsed.
-3.8 GETINFO
+3.8. GETINFO
Sent from the client to the server. The syntax is as for GETCONF:
"GETINFO" 1*(SP keyword) CRLF
@@ -374,7 +374,7 @@
S: 250-version=Tor 0.1.1.0-alpha-cvs
S: 250 OK
-3.9 EXTENDCIRCUIT
+3.9. EXTENDCIRCUIT
Sent from the client to the server. The format is:
"EXTENDCIRCUIT" SP CircuitID SP ServerID *("," ServerID) CRLF
@@ -389,7 +389,7 @@
body consisting of the Circuit ID of the (maybe newly created) circuit.
The syntax is "250" SP "EXTENDED" SP CircuitID CRLF.
-3.10 ATTACHSTREAM
+3.10. ATTACHSTREAM
Sent from the client to the server. The syntax is:
"ATTACHSTREAM" SP StreamID SP CircuitID CRLF
@@ -414,7 +414,7 @@
via TC when "__LeaveStreamsUnattached" is false may cause a race between
Tor and the controller, as both attempt to attach streams to circuits.}
-3.11 POSTDESCRIPTOR
+3.11. POSTDESCRIPTOR
Sent from the client to the server. The syntax is:
"+POSTDESCRIPTOR" CRLF Descriptor CRLF "." CRLF
@@ -430,7 +430,7 @@
why the server was not added. If the descriptor is added, Tor replies with
"250 OK".
-3.12 REDIRECTSTREAM
+3.12. REDIRECTSTREAM
Sent from the client to the server. The syntax is:
"REDIRECTSTREAM" SP StreamID SP Address CRLF
@@ -444,7 +444,7 @@
Tor replies with "250 OK" on success.
-3.13 CLOSESTREAM
+3.13. CLOSESTREAM
Sent from the client to the server. The syntax is:
@@ -455,7 +455,7 @@
not used currently; Tor servers SHOULD ignore unrecognized flags. Tor may
hold the stream open for a while to flush any data that is pending.
-3.14 CLOSECIRCUIT
+3.14. CLOSECIRCUIT
The syntax is:
CLOSECIRCUIT SP CircuitID *(SP Flag) CRLF
@@ -467,12 +467,12 @@
Other flags may be defined in the future; Tor SHOULD ignore unrecognized
flags.
-3.15 QUIT
+3.15. QUIT
Tells the server to hang up on this controller connection. This command
can be used before authenticating.
-4 Replies
+4. Replies
Reply codes follow the same 3-character format as used by SMTP, with the
first character defining a status, the second character defining a
@@ -544,7 +544,7 @@
Unless specified to have specific contents, the human-readable messages
in error replies should not be relied upon to match those in this document.
-4.1 Asynchronous events
+4.1. Asynchronous events
These replies can be sent after a corresponding SETEVENTS command has been
received. They will not be interleaved with other Reply elements, but they
@@ -575,7 +575,7 @@
650-EXTRAMAGIC=99
650 ANONYMITY=high
-4.1.1 Circuit status changed
+4.1.1. Circuit status changed
The syntax is:
@@ -611,21 +611,21 @@
The circuit ID designates which circuit this stream is attached to. If
the stream is unattached, the circuit ID "0" is given.
-4.1.3 OR Connection status changed
+4.1.3. OR Connection status changed
The syntax is:
"650" SP "ORCONN" SP ServerID SP ORStatus
ORStatus = "LAUNCHED" / "CONNECTED" / "FAILED" / "CLOSED"
-4.1.3 Bandwidth used in the last second
+4.1.4. Bandwidth used in the last second
The syntax is:
"650" SP "BW" SP BytesRead SP BytesWritten
BytesRead = 1*DIGIT
BytesWritten = 1*DIGIT
-4.1.4 Log message
+4.1.5. Log message
The syntax is:
"650" SP Severity SP ReplyText
@@ -634,12 +634,12 @@
Severity = "DEBUG" / "INFO" / "NOTICE" / "WARN"/ "ERR"
-4.1.5 New descriptors available
+4.1.6. New descriptors available
Syntax:
"650" SP "NEWDESC" 1*(SP ServerID)
-4.1.6 New Address mapping
+4.1.7. New Address mapping
Syntax:
"650" SP "ADDRMAP" SP Address SP Address SP Expiry
More information about the tor-commits
mailing list