Hi,

You must not forward your control port to the internet.
If you accidentally disable control authentication, then
anyone on the internet can control your relay.

On 3 Aug 2019, at 21:10, Fabio De Sicot <jolek78@tutanota.com> wrote:

Hello everyone
I have a problem I wasn't able to fix until now. Could you help me whit this?

------------------------
- when I start tor I receive this error:

[...........]
Aug 03 09:48:29.000 [notice] Have tried resolving or connecting to address '[scrubbed]' at 3 different places. Giving up.
Aug 03 09:48:40.000 [notice] Have tried resolving or connecting to address '[scrubbed]' at 3 different places. Giving up.
[...........]
Aug 03 10:07:09.000 [warn] Your server () has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.
Aug 03 10:07:09.000 [warn] Your server () has not managed to confirm that its DirPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.

- I verified, and ports 9051, 9001 and 9030 were not filtered

- I checked my torrc file

# cat /usr/local/etc/tor/torrc
Nickname xxxxxx
ORPort 9001 <<<<
ControlPort 9051 <<<<
DirPort 9030 <<<<
#
#
RunAsDaemon 0
ExitRelay 0
CookieAuthentication 1
ContactInfo xxxxxxx

- I verified the internal ip

# ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.8  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::1874:3d84:ac42:fa97  prefixlen 64  scopeid 0x20<link>
        ether b8:27:eb:90:a2:b8  txqueuelen 1000  (Ethernet)
        RX packets 1118761  bytes 398404534 (379.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1095304  bytes 428598871 (408.7 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

- and I verified that on my router the port forwarding was active

#
Port Forwarding
Name   Port Range  Protocol  IP Address  Enable
TOR 9051 TCP&UDP 192.168.0.8  x
ORPORT 9001 TCP&UDP 192.168.0.8  x
DIRPORT 9030 TCP&UDP 192.168.0.8 x
------------------------

Maybe tor isn't guessing your external address correctly.
(It's hard to tell, because you deleted the addresses in your logs,
and deleted the log lines where tor guesses your address.)

Try following these instructions to set Address, NoListen, and
NoAdvertise:
https://lists.torproject.org/pipermail/tor-relays/2019-June/017401.html

T