<div>Hi,<br></div><div><br></div><div>Thank for your advices.<br></div><div><br></div><div>Device: Raspberry pi 3B+<br></div><div>OS: Linux kali-pi 4.19.66-Re4son-v7+<br></div><div>Bandwith (tested on the raspberry with speedtest-cli): <br></div><div>- Download: 308.94 Mbit/s<br></div><div>- Upload: 267.11 Mbit/s<br></div><div><br></div><div>torrc file:<br></div><div><br></div><div>RunAsDaemon 1<br></div><div>BridgeRelay 1<br></div><div><br></div><div>Log notice file /var/log/tor/notices.log<br></div><div>#Log debug file /var/log/tor/debug.log<br></div><div>#Log notice syslog<br></div><div>#Log debug stderr<br></div><div><br></div><div># Replace "TODO1" with a Tor port of your choice. This port must be externally<br></div><div># reachable. Avoid port 9001 because it's commonly associated with Tor and<br></div><div># censors may be scanning the Internet for this port.<br></div><div>ORPort 4433<br></div><div><br></div><div>ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy<br></div><div><br></div><div># Replace "TODO2" with an obfs4 port of your choice. This port must be<br></div><div># externally reachable and must be different from the one specified for ORPort.<br></div><div># Avoid port 9001 because it's commonly associated with<br></div><div># Tor and censors may be scanning the Internet for this port.<br></div><div>ServerTransportListenAddr obfs4 0.0.0.0:1234<br></div><div><br></div><div># Local communication port between Tor and obfs4. Always set this to "auto".<br></div><div># "Ext" means "extended", not "external". Don't try to set a specific port numb er, nor listen on 0.0.0.0.<br></div><div>ExtORPort auto<br></div><div><br></div><div># Replace "<<a href="mailto:address@email.com">address@email.com</a>>" with your email address so we can contact you if there are problems with your bridge.<br></div><div># This is optional but encouraged.<br></div><div>ContactInfo ######################<br></div><div><br></div><div># Pick a nickname that you like for your bridge. This is optional.<br></div><div>Nickname citizenfour<br></div><div><br></div><div>RelayBandwidthRate 3 MB<br></div><div>RelayBandwidthBurst 6 MB<br></div><div><br></div><div>ExitPolicy reject *:*<br></div><div><br></div><div>I don't have "PublishServerDescriptor" in my conf. Should i?<br></div><div><br></div><div><br></div><div><br></div><div>Tor logs (notices.log) look ok:<br></div><div><br></div><div>Nov 23 15:41:35.000 [notice] New control connection opened.<br></div><div>Nov 23 17:45:38.000 [notice] New control connection opened.<br></div><div>Nov 23 20:31:41.000 [notice] Heartbeat: Tor's uptime is 11 days 0:00 hours, with 5 circuits open. I've sent 134.74 MB and received 1.01 GB.<br></div><div>Nov 23 20:31:41.000 [notice] Heartbeat: In the last 6 hours, I have seen 1 unique clients.<br></div><div>Nov 24 02:31:41.000 [notice] Heartbeat: Tor's uptime is 11 days 6:00 hours, with 0 circuits open. I've sent 136.02 MB and received 1.01 GB.<br></div><div>Nov 24 02:31:41.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients.<br></div><div>Nov 24 08:31:41.000 [notice] Heartbeat: Tor's uptime is 11 days 12:00 hours, with 0 circuits open. I've sent 137.11 MB and received 1.02 GB.<br></div><div>Nov 24 08:31:41.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients.<br></div><div>Nov 24 14:31:41.000 [notice] Heartbeat: Tor's uptime is 11 days 18:00 hours, with 14 circuits open. I've sent 138.59 MB and received 1.02 GB.<br></div><div>Nov 24 14:31:41.000 [notice] Heartbeat: In the last 6 hours, I have seen 0 unique clients.<br></div><div><br></div><div>Bridge is listed as up on tor relay search:<br></div><div><br></div><div><a href="https://metrics.torproject.org/rs.html#details/9D1CCBE7EEF99FCCA6F767838FA08B23DDFABB3A">https://metrics.torproject.org/rs.html#details/9D1CCBE7EEF99FCCA6F767838FA08B23DDFABB3A</a><br></div><div><br></div><div>Nyx says:<br></div><div><br></div><div><br></div><div>14:49:17 [NOTICE] New control connection opened. [1 duplicate hidden]<br></div><div>x 14:31:41 [NOTICE] Heartbeat: In the last 6 hours, I have seen 0 unique clients. [2<br></div><div>x duplicates hidden]<br></div><div>x 14:31:41 [NOTICE] Heartbeat: Tor's uptime is 11 days 18:00 hours, with 14 circuits<br></div><div>x open. I've sent 138.59 MB and received 1.02 GB. [2 duplicates hidden]<br></div><div>xlq November 23, 2019 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk<br></div><div>xx20:31:41 [NOTICE] Heartbeat: In the last 6 hours, I have seen 1 unique clients. x<br></div><div>xx20:31:41 [NOTICE] Heartbeat: Tor's uptime is 11 days 0:00 hours, with 5 circuits x<br></div><div>xx open. I've sent 134.74 MB and received 1.01 GB. [3 duplicates hidden]<br></div><div><br></div><div>etc.....<br></div><div><br></div><div>Sometime i see many circuits and "connectons" but right now everything is blank or at 0 (bandwith use).<br></div><div>i just shared the connexion from my smartphone to connect to tor with my laptop (that the only thing i can do right now). i'm connected to my bridge and can browse.<br></div><div>If i download a file ( 1GB) i can see some connections (10 outbound) in nyx and the bandwith use increases.<br></div><div><br></div><div>I don't know..despite the fact that everthing looks fine to me, i lost the fast and stable flag, sometime tor relay search says the bridge is down and in 11 days nobody connected to my bridge (ecepted me).<br></div><div><br></div><div><br></div><div><br></div><div class="protonmail_signature_block"><div class="protonmail_signature_block-user protonmail_signature_block-empty"><br></div><div class="protonmail_signature_block-proton">Sent with <a href="https://protonmail.com" target="_blank">ProtonMail</a> Secure Email.<br></div></div><div><br></div><div>‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐<br></div><div> Le dimanche 24 novembre 2019 12:17, <entensaison@use.startmail.com> a écrit :<br></div><div> <br></div><blockquote class="protonmail_quote" type="cite"><div><div><div><div><div> <br></div><div><div><div>On Thursday, November 21, 2019 at 7:29 PM, Mario Costa <mario.costa@icloud.com> wrote: <br></div><div> <br></div></div><blockquote type="cite"><div><div><div> <br></div><blockquote type="cite"><div>Il giorno 21 nov 2019, alle ore 15:49, Matt Traudt <pastly@torproject.org> ha scritto: <br></div><div> <br></div><div> Thanks for running a bridge. <br></div><div> <br></div><div> Check Tor's logs to make sure it is actually running and doesn't report <br></div><div> issues. Search its hashed fingerprint on <br></div><div> https://metrics.torproject.org/rs.html and make sure it is listed as up. <br></div><div> Verify you did *not* set 'PublishServerDescriptor 0'. Verify you can use <br></div><div> your bridge from outside your home. I once had a residential ISP that <br></div><div> blocked inbound port 80 but not 443.<br></div></blockquote><div><br></div><div>This actually made me realize that my home router would not properly forward ports 80 and 443 from outside. I could
connect to my bridge from the LAN (even using my external IP) but not from outside. I had to change to a non-standard
port, unfortunately, because apparently 80 and 443 are used by the router’s web GUI even if I disabled external access
to it. That’s a shame because I understand that ports 80 and 443 are less likely to be blocked by censors.<br></div><div> <br></div><div> However, it’s still not clear to me how I can confirm anyone is using the bridge.<br></div></div></div></blockquote><div><br></div><div>In the nyx log you see messages like<br></div><div> 'In the last X hours we have seen X unique clients' (I don't remember the exact wording) <br></div><div> Those are the clients that did use your bridge. <br></div><div> <br></div><blockquote type="cite"><div><div>When I connect to it, all I see in nyx are OUTBOUND connections and not even one inbound connection (maybe that’s
by design in order to protect connecting users' privacy, I don’t know).<br></div></div></blockquote><div><br></div><div>You are probably right.<br></div><div> In the past you could see connecting users in nyx as inbound connections without visible IP-address. Now they are not
displayed as inbound connections any more. The outbound connections that are needed for these users are still
displayed. <br></div><div> <br></div></div></div></div></div></div></blockquote><div><br></div>