<div dir="ltr">I'm attempting to run a Relay but I haven't been able to get it the ORPort to be confirm as reachable. I've tried lots of things but I'm hoping there is something I haven't thought of yet that can make this work! I've got a 50Mbps symmetrical connection (without data caps) that I would love to have the Tor network utilize.<div><br></div><div>Hardware info:</div><div>- Asus RT-N66U running DD-WRT</div><div>- Raspberry Pi 2 running Raspbian</div><div>- SanDisk MicroSDHC UHS-I 16GB</div><div><br></div><div>Here are all the steps I've taken:</div><div><div>- Formatted the MicroSDHC with Win32DiskImager.</div><div>- Followed the Instructables Raspberry Pi Tor Relay configuration guide.</div><div>- Port forwarded via NAT/QoS then Port Forwarding. Protocol is set to TCP, double-checked IP is what is assigned to Raspberry Pi 2 and enable box is checked.</div><div>- ORPort set to 9001. Also changed ORPort to 443, did "sudo service tor reload" and changed the port in the forwarding section of my router.</div><div>- Tried router DMZ for Raspberry Pi LAN IP.</div><div><br></div><div>I would really like to get this to work, if possible. I can't run an Exit node on my connection but since my connection sits unused for most of the day it should be put to good relay use.</div></div></div>